公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 |
1993 | Modelling of Tool/Chip Interface Temperature Distribution in Metal Cutting | 楊宏智; Chou, T. L.; Young, Hong-Tsu | International Journal of Mechanical Sciences | | | |
1994 | On the Analysis of Chip Temperature Distribution in Orthogonal Machining | 楊宏智; Liou, Hong Y.; Young, Hong-Tsu | International Journal of Machine Tools & Manufacture | | | |
1988 | Predicting Cutting Forces in Face Milling | 楊宏智; Oxley, P. L. B.; Young, Hong-Tsu | International Journal of Machine Tools & Manufacture | | | |
1993 | Predicting the Chip Flow for Nose Radius Tools under Oblique Machining Conditions | 楊宏智; 廖運炫 ; Yang, Y. C.; Mathew, P.; Young, Hong-Tsu; Liao, Yun-Sheien | Journal of the Chinese Institute of Engineers | | | |
1991 | A Strain-Hardening Slipline Field Analysis of the Plastic Deformation Observed in a Model Asperity Interaction Experiment | Kopalinsky, E. M.; Oxley, P. L. B.; 楊宏智; Young, Hong-Tsu | Journal of the Mechanics and Physics Solids | | | |
2006 | Surface Integrity of Si Wafer in Ultra Precision Machining | 楊宏智; 廖錫田; 黃弘毅; HONG-TSU YOUNG | Int. J. of Adv. Manuf. Technology | | | |
2009 | TRIZ創新發明解決理論之系統化分析應用研究 | 郭秉倫; Kuo, Billion | | | | |
2007 | TRIZ發明原則於系統化研發創新之應用 | 巫翎楷; Wu, Ling-Kai | | | | |
2006 | 以聚焦尋形為基礎之影像影像三維量測模組開發 | 楊宏智; 張正星; 江明學 | 機械月刊 | | | |
1993 | 切削理論在車削顫振之應用 | 楊宏智; 唐永新 | 國立臺灣大學工程學刊 | | | |
2009 | 創新設計之摺疊腳踏車結合自動發光輪轂燈 | 曾朝良; Tseng, Chao-Liang | | | | |
2007 | 化學機械拋光中鑽石修整器設計參數之研究 | 蕭啟明; Hsiao, Chi-Ming | | | | |
2008 | 化學機械拋光鑽石修整器修整率模式與工業上的應用 | 楊宏智; 鄭偉祥; 陳鯤仁; 蕭啟明; HONG-TSU YOUNG | 第25屆全國機械工程研討會 | | | |
2008 | 化學機械研磨之修整加工機制研究分析 | 陳鯤仁; Chen, Kuen-Ren | | | | |
2006 | 多組矛盾對狀況下TRIZ創新法則之優先選用法 | 林傳傑; 楊宏智; 康銘元; HONG-TSU YOUNG | 中華萃思學會第一屆學術暨實務研討會 | | | |
2004 | 專利指標於工程領域之整合應用研究 | 郭力賓; Kuo, Lee-Pin | | | | |
2004 | 成形砂輪之修整研究 | 陳德楨; Chen, Der-Jen | | | | |
2007 | 批次式蝕刻於矽晶圓薄化製程技術之研究 | 詹景棓; Zhan, Jing-Pou | | | | |
2012 | 技術系統演化趨勢於專利佈局分析之方法與研究 | 蔡建興; Tsai, Chien-Hsing | | | | |
1994 | 摩擦壓接之熱塑性變形分析 | 楊宏智; 周祖亮 | 中國力學期刊 | | | |