公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 |
2003 | The 5-axis Rough Machining Approach for Centrifugal Impeller | 楊宏智; 莊禮彰; HONG-TSU YOUNG | Int. J. of Adv. Manuf. Technology | | | |
1987 | Allowing for End Cutting Edge Effects in Predicting Forces in Bar Turning with Obique Machining Conditions | Hu, R. S.; Mathew, P.; Oxley, P. L. B.; 楊宏智; Young, Hong-Tsu | Proceedings of Institution of Mechanical Engineers | | | |
1989 | Allowing for Nose Radius Effects in Predicting the Chip Flow and Cutting Forces in Bar Turning | 楊宏智; Mathew, P.; Oxley, P. L. B.; Young, Hong-Tsu | Proceedings of Institution of Mechanical Engineers | | | |
1994 | An Analytical Model of Chatter Vibration in Metal Cutting | Tarng, Y. C.; 楊宏智; Lee, B. Y.; Young, Hong-Tsu | International Journal of Machine Tools & Manufacture | | | |
1992 | Application of Machining Theory to Electric-Hot-Machining | 楊宏智; Liou, H. C.; Young, Hong-Tsu | Bulletin of the College of Engineering | | | |
1988 | CAD/CAM 系統的選擇與評估 | 楊宏智; 陳復國 ; 楊申語 ; Yang, Sen-Yen | 機械工程會刊 | | | |
2005 | CAM系統三軸高速銑削路徑探討 | 劉憲青; Liu, Hsien-Ching | | | | |
1997 | CNC車床熱誤差分析暨改善研究 | 楊宏智; 王榮邦 | 機械月刊 | | | |
1992 | An Experimental Investigation of Temperatures in Chip Formation | 楊宏智; Liou, H. Y.; Young, Hong-Tsu | Journal of Chinese Society of Mechanical Engineers | | | |
2006 | FEM分析搓牙製程及改善螺絲強度之研究 | 劉宗倜; Liu, Tsung-Ti | | | | |
2007 | FEM輔助鋰離子二次電池安全閥之開發研究 | 呂孟哲; Lu, Meng-Che | | | | |
1993 | An Integrated Expert Operation Planning System with Feature-Based Design Model | 楊宏智; Tsai, D. H.; Young, Hong-Tsu | The International Journal, Advanced Manufacturing Technology | | | |
1993 | Modelling of Tool/Chip Interface Temperature Distribution in Metal Cutting | 楊宏智; Chou, T. L.; Young, Hong-Tsu | International Journal of Mechanical Sciences | | | |
1994 | On the Analysis of Chip Temperature Distribution in Orthogonal Machining | 楊宏智; Liou, Hong Y.; Young, Hong-Tsu | International Journal of Machine Tools & Manufacture | | | |
1988 | Predicting Cutting Forces in Face Milling | 楊宏智; Oxley, P. L. B.; Young, Hong-Tsu | International Journal of Machine Tools & Manufacture | | | |
1993 | Predicting the Chip Flow for Nose Radius Tools under Oblique Machining Conditions | 楊宏智; 廖運炫 ; Yang, Y. C.; Mathew, P.; Young, Hong-Tsu; Liao, Yun-Sheien | Journal of the Chinese Institute of Engineers | | | |
1991 | A Strain-Hardening Slipline Field Analysis of the Plastic Deformation Observed in a Model Asperity Interaction Experiment | Kopalinsky, E. M.; Oxley, P. L. B.; 楊宏智; Young, Hong-Tsu | Journal of the Mechanics and Physics Solids | | | |
2006 | Surface Integrity of Si Wafer in Ultra Precision Machining | 楊宏智; 廖錫田; 黃弘毅; HONG-TSU YOUNG | Int. J. of Adv. Manuf. Technology | | | |
2009 | TRIZ創新發明解決理論之系統化分析應用研究 | 郭秉倫; Kuo, Billion | | | | |
2007 | TRIZ發明原則於系統化研發創新之應用 | 巫翎楷; Wu, Ling-Kai | | | | |