Results 1-1000 of 5933 (Search time: 0.069 seconds).

Issue DateTitleAuthor(s)SourcescopusWOSFulltext/Archive link
12024An investigation into the thermal rectification in one-dimensional asymmetric systemsMEI-JIAU HUANG ; Liao, Hao YuApplied Thermal Engineering
22024Miniaturized ionogel-based bi-stable actuator with state-sensing capabilityLo, Li Yu; Lin, Pei Ting; Cho, Chia Yu; Wang, Hsiang Yun; YAO-JOE YANG Sensors and Actuators A: Physical
32024A miniaturized soft actuator based on liquid crystal elastomer with temperature-compensated self-sensing capabilityChi, Yun Li; Wang, Wei Yi; YAO-JOE YANG Sensors and Actuators A: Physical
42024The design, fabrication and analysis of a cantilever-based tensile-mode nonlinear piezoelectric energy harvesterChen, Hou Hsun; You, Shih Kuan; WEI-JIUN SU Mechanical Systems and Signal Processing
52024Real-Time bubble counting for sensing petroleum valve closure leakageHuang, Po-Wei; Zane Wang, Yu Chi; FU-CHENG WANG Measurement: Journal of the International Measurement Confederation
62024Enhanced boiling heat transfer on three-dimensional hybrid micropillar array surfacesHuang, Chung Te; Chan, Wei Hsin; Chen, Qi Jun; Hsu, Wei Lun; MING-CHANG LU International Journal of Heat and Mass Transfer
72024Force Analysis of Statically Balanced Serially Connected Manipulators Using Springs Based on Torque Compatibilities Associated With Accumulative Joint AnglesJhuang, Chi Shiun; Juang, Chia Wei; DAR-ZEN CHEN Journal of Mechanisms and Robotics00
82024A Multi-user Cross-platform hands-on virtual lab within the Metaverse – the case of machining trainingChuang, Tung Jui; SHANA SMITH Virtual Reality
92024The generalized spring-loaded inverted pendulum model for analysis of various planar reduced-order models and for optimal robot leg designLu, Wei Chun; PEI-CHUN LIN Bioinspiration and Biomimetics
102024Multiplane differential saturated excitation microscopy using varifocal lensesLuo, Chi Hao; Vyas, Sunil; KUANG-YUH HUANG ; Chu, Shi-Wei; Luo, YuanBiomedical Optics Express
112024Effect of TiO2 nanoparticles on the corrosion resistance, wear, and antibacterial properties of microarc oxidation coatings applied on AZ31 magnesium alloyChen, Wei Hao; Huang, Shih Yen; Chu, Yu Ren; SHUN-HAN YANG ; I-Chung Cheng ; Jian, Shun Yi; YUEH-LIEN LEE Surface and Coatings Technology
122024Volume holographic illuminator for Airy light-sheet microscopyHsu, Hung Chuan; Vyas, Sunil; JUI-CHING WU ; KUANG-YUH HUANG ; HSIEN-SHUN LIAO ; Yeh, J. Andrew; Luo, YuanOptics Express1
132024A novel spring gravity-balance method for spatial articulated manipulators without auxiliary linksJuang, Chia Wei; Jhuang, Chi Shiun; DAR-ZEN CHEN Mechanism and Machine Theory0
142024Reaction Wheel Design for Precise Attitude Control of CubeSats Using Flexible PCB Windings and Halbach Magnet ArrayLiu, Nai Wen; Hung, Kuo Yuan; Lyu, Bo Ting; SHIH-CHIN YANG ; Lin, Ying Po; Yu Chan, ChenIEEE Transactions on Aerospace and Electronic Systems
152024Replication of large-area microstructures by combining movable induction heating and roller hot embossingHung, Wei Cheng; Chiu, Chun Yang; He, Jyun Wei; Ke, Kun Cheng; SEN-YEU YANG Polymer Engineering and Science
162024Design, Fabrication and Validation of a Flexible Tactile Sensor for a Hand ProsthesisNguyen, Dai Dong; Xie, Wu Qi; Su, Shun Feng; CHUNG-HSIEN KUO IEEE Sensors Journal
172024Control Design for a Power-Assisted Mobile Trainer: Applied to Clinical Stroke RehabilitationFU-CHENG WANG ; Pan, Wei Ren; Lee, Chung Hsien; Chen, Szu Fu; Lin, Ang Chieh; Cheng, Lin Yen; Lin, Tzu TungMachines
182024Extended-Window Algorithms for Model Prediction Applied to Hybrid Power SystemsFU-CHENG WANG ; Huang, Hsiao TzuTechnologies
192024Geometric error compensation method using the Laser R-testHsieh, Tung Hsien; Wen-Yuh Jywe ; Zeng, Jheng Jhong; Hsu, Chia Ming; Chang, Yu WeiInternational Journal of Advanced Manufacturing Technology
202024Real-time surface roughness estimation and automatic regrinding of ground workpieces using a data-driven model and grinding force inputsLai, Jing Yu; PEI-CHUN LIN International Journal of Advanced Manufacturing Technology
212024Atlas-Based Path Synthesis of Planar Four-Bar Linkages Using Elliptical Fourier DescriptorsChang, Yuan; Chang, Jia Ling; JYH-JONE LEE Mechanisms and Machine Science
222023Healing effect of electric current treatment on superelasticity and elastocaloric effect of TiNi shape memory wireCheng, Yu; CHIH-HSUAN CHEN Journal of Alloys and Compounds00
232023Pore evolution and size effect of nanoporous silver on SERS for malachite green detectionZeng, Wang You; Wang, Zhuo Fu; Lin, Ding Zheng; I-Chung Cheng Applied Surface Science00
242023Ti30Zr10Hf10Ni35Cu15 high-entropy shape memory alloy with tunable transformation temperature and elastocaloric performance by heat treatmentChang, Yen Ting; Lee, Ming Hao; CHU, M. W.; Hsu, Yi Ting; CHIH-HSUAN CHEN Materials Today Advances
252023An all-pass based internal model principle controller for galvanometer mirror steeringYU-HSIU LEE ; Su, Shih MeiControl Engineering Practice0
262023Investigation of interaction between friction and elastic deformation by using a novel feed drive modelJian, Zheng Wei; Liu, Chung Ching; Tang, Pu Yang; MENG-SHIUN TSAI Mechatronics00
272023Singularity analysis and modular synthesis of over-constrained spatial mechanisms - A case study on Bennett and RPRP linkageKUAN-LUN HSU ; Chung, Chih HsinMechanism and Machine Theory00
282023Facile and versatile fabrication process for AgNW/GZO transparent composite electrodes for photovoltaic applications by atmospheric pressure plasma jetLuo, Yu Tang; Zhou, Zhe Han; Huang, Zhang Bo; JIA-YANG JUANG ; LI XU Applied Surface Science10
292023Experimental investigation and analysis of alumina/polymer/alginate composite desiccant materialsLiang, Jyun De; Tsai, Lu Kuan; Chai, Shaowei; Zhao, Yao; Chiang, Yuan Ching; Dai, Yanjun; SIH-LI CHEN Energy00
302023Disruption and microexplosion mechanisms of burning alcohol droplets with the addition of nanoparticlesLai, Yen Wei; KUO-LONG PAN Combustion and Flame00
312023Non-invasive, ultrasensitive detection of glucose in saliva using metal oxide transistorsSharma, Abhinav; AlGhamdi, Wejdan S.; Faber, Hendrik; Lin, Y.-H.; CHIEN-HAO LIU ; Hsu, En Kai; Lin, Wei Zhi; Naphade, Dipti; Mandal, Suman; Heeney, Martin; Anthopoulos, Thomas D.Biosensors and Bioelectronics01
322023Synthesizing microfluidic networks of one-step-dilution gradient generators with arbitrary concentration profilesChiu, Ying Hsuan; Cho, Chia Yu; Hsu, Jiun Jr; Hung, Sheng Feng; Huang, Chih Lin; YAO-JOE YANG Sensors and Actuators A: Physical00
332023Working Memory Ability Evaluation Based on Fuzzy Support Vector RegressionLo, Jia Hsun; HAN-PANG HUANG ; Sung, Su ChingSensors00
342023Human Posture Transition-Time Detection Based upon Inertial Measurement Unit and Long Short-Term Memory Neural NetworksKuo, Chun Ting; Lin, Jun Ji; Jen, Kuo Kuang; WEI-LI HSU ; FU-CHENG WANG ; Tsao, Tsu Chin; JIA-YUSH YEN Biomimetics20
352023Short line segment interpolation by using velocity blending technology with high overlapping timeLi, Hung Ming; MENG-SHIUN TSAI ; Cheng, Chih ChunJournal of Manufacturing Processes10
362023Peridynamic analysis of curved elastic beamsYang, Zhenghao; Naumenko, Konstantin; CHIEN-CHING MA ; Oterkus, Erkan; Oterkus, SeldaEuropean Journal of Mechanics, A/Solids10
372023Thermal displacement prediction model with a structural optimized transfer learning techniqueKuo, Ping Huan; Tu, Tzung Lin; Chen, Yen Wen; Wen-Yuh Jywe ; Yau, Her TerngCase Studies in Thermal Engineering00
382023Closed-Form Analytical Solutions for the Deflection of Elastic Beams in a Peridynamic FrameworkYang, Zhenghao; Naumenko, Konstantin; CHIEN-CHING MA ; Chen, YangApplied Sciences (Switzerland)0
392023Modelling the wall friction coefficient for a simple shear granular flow in view of the degradation mechanismLin, Cheng Chuan; Artoni, Riccardo; FU-LING YANG ; Richard, PatrickJournal of Fluid Mechanics00
402023Machine Learning for Human Motion Intention DetectionLin, Jun Ji; Hsu, Che Kang; WEI-LI HSU ; Tsao, Tsu Chin; FU-CHENG WANG ; JIA-YUSH YEN Sensors00
412023A hybrid machine learning-genetic algorithm (ML-GA) model to predict optimal process parameters of nanoporous Cu for CO2 reductionLok, Jun Yi; Tsai, Wen Han; I-Chung Cheng Materials Today Energy31
422023Performance Evaluation for Clinical Stroke Rehabilitation via an Automatic Mobile Gait TrainerShih, Chih Jen; Li, You Chi; Yuan, Wei; Chen, Szu Fu; Lin, Ang Chieh; Lin, Tzu Tung; FU-CHENG WANG Sensors10
432023Solid-liquid coupling of in-phase and out-of-phase vibrations for two piezoelectric disksYen, Chien Yu; YU-HSI HUANG ; Jhuang, Kai Lin; Liao, Chan YiApplied Acoustics00
442023Smooth Interpolation Design with Consideration of Corner Tolerance Constraints for RoboticsLi, Hung Ming; MENG-SHIUN TSAI ; Zhang, Ting Hua; Cheng, Chih ChunApplied Sciences (Switzerland)00
452023Image Preprocessing with Enhanced Feature Matching for Map Merging in the Presence of Sensing ErrorChen, Yu Lin; KUEI-YUAN CHAN Sensors00
462023Flow control of a plunging cylinder based on resolvent analysisLin, Ching Te; Tsai, Min Lin; HSIEH-CHEN TSAI Journal of Fluid Mechanics00
472023Stick-slip squirmers: slip asymmetry can qualitatively change self-swimming characteristics of squirmersFU-LING YANG ; Chen, You An; Premlata, A. R.; Wei, Hsien HungJournal of Fluid Mechanics10
482023High-quality GeSn thin-film resonant cavities for short-wave infrared applicationsWu, Jheng Ying; Wang, Yu Fu; Liu, Chia You; Kuo, Shin Chun; Chen, Tzu Hsuan; JIUN-YUN LI ; Huang, Chin Ya; CHIEN-HAO LIU ; Yang, Jung Yen; Chang, Chun Chieh; TZU-HSUAN CHANG Journal of Vacuum Science and Technology B00
492023Non-integral depth measurement of high-aspect-ratio multi-layer microstructures using numerical-aperture shaped beamsChein, Wei Hsin; Yang, Fu Sheng; Thakur, Komal; Wu, Guo Wei; LIANG-CHIA CHEN Optics and Lasers in Engineering10
502023Design and Analysis of an Extended Simply Supported Beam Piezoelectric Energy HarvesterWEI-JIUN SU ; Tseng, Chu HsiangSensors10
512023Teaching Artificial Intelligence in Mechanical Engineering to Cultivate Cyber-physical System TalentsCHUNG-HSIEN KUO ; Nguyen, Phuc Thanh Thien; Wu, Shih LinAnnual Conference on Innovation and Technology in Computer Science Education, ITiCSE00
522023Encouraging Mechanical Engineering Students to Learn Machine Learning via Project-based LearningCHUNG-HSIEN KUO ; Wu, Shih LinAnnual Conference on Innovation and Technology in Computer Science Education, ITiCSE00
532023Knee Angle Generation with Walking Speed Adaptation Ability for a Powered Transfemoral Prosthetic Leg PrototypePranata, I. Wayan Dani; Nguyen, Phuc Thanh Thien; Su, Kuo Ho; Kuo, Yu Cheng; CHUNG-HSIEN KUO Inventions00
542023Non-integral model-based scatterometry for CD metrology of single high-aspect-ratio microstructuresChein, Wei Hsin; Yang, Fu Sheng; Fu, Zi Ying; LIANG-CHIA CHEN Surface Topography: Metrology and Properties00
552023Decoupling wing-shape effects of wing-swept angle and aspect ratio on a forward-flying butterflyCHANG, S.K.; Lin, You Jun; KUAN-LUN HSU ; JING-TANG YANG Physical Review E11
562023Closed-form series solutions to peridynamic rod equations: Influence of kernel functionYang, Zhenghao; Naumenko, Konstantin; CHIEN-CHING MA ; Chen, YangTechnische Mechanik0
572023Label-free and noninvasive analysis of microorganism surface epistructures at the single-cell levelLin, Yu Sheng; CHEN-LI SUN ; Tsang, Sung; Bensalem, Sakina; Le Pioufle, Bruno; Wang, Hsiang YuBiophysical Journal00
582023Improving the functional stability of TiNi-based shape memory alloy by multi-principal element designLu, Nian Hu; CHIH-HSUAN CHEN Materials Science and Engineering A22
592023Finite element analysis results visualization of manual metal arc welding using an interactive mixed reality-based user interfaceShankhwar, Kalpana; SHANA SMITH Journal of Manufacturing Processes10
602023Shape Memory Properties and Microstructure of FeNiCoAlTaB Shape Memory AlloysTseng, Li Wei; Lee, Po Yu; Lu, Nian Hu; Hsu, Yi Ting; CHIH-HSUAN CHEN Crystals00
612023Effects of wide-range copper surface wettability on spray cooling heat transferLin, Pei Ching; Cheng, Hui Chung; PING-HEI CHEN Experimental Thermal and Fluid Science10
622023Torque Measurement and Control for Electric-Assisted Bike Considering Different External Load ConditionsHo, Ping Jui; Yi, Chen Pei; Lin, Yi Jen; Chung, Wei Der; Chou, Po Huan; SHIH-CHIN YANG Sensors11
632023Dynamic turning and running of a hexapod robot using a separated and laterally arranged two-leg modelChang, I. Chia; PEI-CHUN LIN Bioinspiration and Biomimetics21
642023The Enhanced Thermal Stability of (Mg0.95Ni0.05)2TiO4 Dielectric Ceramics Modified by a Multi-Phase MethodShen, Chun-Hsu; Shen, Ting-Wei; Hsieh, Tsai-Yu; Lan, Kai-Chun; Hsu, Shen-Hsien; Wang, Ching-Hsuan; Lin, Yu-Ting; WEN-FANG WU ; Tseng, Zong-LiangMaterials (Basel, Switzerland)00
652023Fabrication of wafer-level double-sided microlens array using injection compression moldingCheng, Ting Yu; Ke, Kun Cheng; SEN-YEU YANG Polymer Engineering and Science00
662023Effects of Tapered-Strut Design on Fatigue Life Enhancement of Peripheral StentsLin, Li Han; Ho, Kuang Lei; Jian, Yu Min; Chiang, Kuang Hsing; HAO-MING HSIAO Bioengineering10
672023Spring-balanced 3-DoF serial planar manipulators for constant forces in arbitrary directionsJuang, Chia Wei; Jhuang, Chi Shiun; DAR-ZEN CHEN Robotica11
682023Machine Learning for Two-Phase Flow Separation in a Liquid-Liquid Interface Manipulation SeparatorChang, Yi Chieh; CHEN, Y. J.; Chen, Po Ying; Chen, Yu Chieh; Maqbool, Faisal; Ho, Tsung Yi; YA-YU CHIANG ACS Applied Materials and Interfaces10
692023Manipulator Trajectory Optimization Using Reinforcement Learning on a Reduced-Order Dynamic Model with Deep Neural Network CompensationChen, Yung Hsiu; Yang, Wu Te; Chen, Bo Hsun; PEI-CHUN LIN Machines00
702023A thermodynamic model for the pressure created by injecting liquid nitrogen into a boiler partially filled with waterCHUN-TI CHANG ; Lee, Yu ChengThermal Science and Engineering Progress00
712023Damage Monitoring of Composite Adhesive Joint Integrity Using Conductivity and Fiber Bragg GratingCHOW-SHING SHIN ; Chen, Liang WeiPolymers00
722023Dealloying kinetic and catalytic applications of hierarchical porous copper via hot-dip galvanization and subsequent vapor phase dealloyingTsai, Wen Han; Widyanata, Winson; Chien, Chia Ying; I-Chung Cheng Journal of Alloys and Compounds10
732023Full-field chromatic confocal microscopy for surface profilometry with sub-micrometer accuracyChen, Hong Ruei; LIANG-CHIA CHEN Optics and Lasers in Engineering32
742023Effect of Laser Scribing on Coating, Drying, and Crystallization of Absorber Layer of Perovskite Solar CellsHuang, Chaopeng; Guan, Cheng Kang; Lin, Bo Qian; Huang, Shih Han; BIN-JUINE HUANG ; WEI-FANG SU ; LI XU Solar RRL12
752023Resonance Mode and Sound Pressure of a Push–Pull Electrostatic Speaker Based on Elliptical DiaphragmChiang, Hsin Yuan; YU-HSI HUANG Journal of Vibration and Acoustics, Transactions of the ASME00
762023A New Look at National Diversity of Inventor Teams within OrganizationsCHUN-CHIEH WANG ; Lin, Jia Tian; DAR-ZEN CHEN ; SZU-CHIA LO Journal of Informetrics00
772023A generative model for path synthesis of four-bar linkages via uniform sampling datasetYu, Sheng Chia; Chang, Yuan; JYH-JONE LEE Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science11
782023Development of a Magnetic/Eddy-Current Sensing System For Simultaneous Estimation of Electrical Conductivity and Thickness in Non-Ferrous Metal PlatesCHUN-YEON LIN ; Wu, Yi Chin; Teng, MeganIEEE/ASME Transactions on Mechatronics32
792023Maskless deposition of patterned transparent conductive oxides via laser-assisted atmospheric pressure plasma jetLee, Yun Chung; Chen, Yu Chen; Lin, Hsin Tien; LI XU ; Lee, Ming Tsang; JIA-YANG JUANG Journal of Alloys and Compounds11
802023Spring Perfectly Statically Balanced 1-DOF Mechanisms Using Slider-CrankHsu, Cheng Hsuan; Lin, Yu Hsuan; Jhuang, Chi Shiun; DAR-ZEN CHEN Mechanisms and Machine Science
812023EnveRob: Integration of an Intelligent Robotic Arm System for Mail Delivery ApplicationsKao, Shih Huai; Pai, Wei Lin; Yeh, Feng En; Chen, Jr Jen; Lin, Yu Wei; PEI-CHUN LIN International Conference on Advanced Robotics and Intelligent Systems, ARIS0
822023Light sheet fluorescence microscopy in NIR II for mouse lung imagingChang, Chun Chun; S.-JA TSENG ; KUANG-YUH HUANG ; YUAN LUO Proceedings of SPIE - The International Society for Optical Engineering
832023Superior Optimization for a Hybrid PEMFC Power System Employing Model PredictionsFU-CHENG WANG ; Wang, Jian ZhiInternational Journal of Energy Research00
842023A Hybrid Impedance and Admittance Control Strategy for a Shape-Transformable Leg-WheelZhuang, Yuan Cheng; Liu, Yu Ju; Yu, Wei Shun; PEI-CHUN LIN IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM00
852023Astigmatic Detection System with Feedback Mechanism for Calibrating Driving Waveform of Piezoelectric ActuatorsHSIEN-SHUN LIAO ; Guo, Zheng Rong; Tan, Hong Sheng; KUANG-YUH HUANG ; Hwang, Ing Shouh; Hwu, En TeIEEE Transactions on Instrumentation and Measurement00
862023Experimental comparison of non-contact and tactile R-Test instruments in dynamic measurementIbaraki, Soichi; Onodera, Koki; Wen-Yuh Jywe ; Hsu, Chia Ming; Chang, Yu WeiInternational Journal of Advanced Manufacturing Technology00
872023ESTIMATION OF NATURAL FREQUENCIES FOR ROBOTICS AT DIFFERENT POSTURES USING PARTICLE SWARM OPTIMIZATION AND RAYLEIGH QUOTIENTCheng, Kai Hsiang; MENG-SHIUN TSAI ; Li, Hung Ming; Hong, Mao QiProceedings of the International Congress on Sound and Vibration0
882023Signal Processing and Artificial Intelligence for Dual-Detection Confocal ProbesSato, Ryo; Li, Xinghui; Fischer, Andreas; LIANG-CHIA CHEN ; Chen, Chong; Shimomura, Rintaro; Gao, WeiInternational Journal of Precision Engineering and Manufacturing00
892023Effects of Tapered-Strut Design on Corrosion Resistance for Biodegradable Magnesium StentsLin, Li Han; HAO-MING HSIAO Proceedings of the World Congress on Electrical Engineering and Computer Systems and Science
902023A comprehensive review on mechanical amplifier structures in piezoelectric energy harvestersLong, Su Xian; Khoo, Shin Yee; Ong, Zhi Chao; Soong, Ming Foong; YU-HSI HUANG ; Prasath, Nithiyanandam; Noroozi, SiamakMechanics of Advanced Materials and Structures12
912023Ultrathin arch-like labyrinthine acoustic metasurface for low-frequency sound absorptionChen, Jung San; Chung, Yu Ting; Wang, Cheng Yi; Lo, Wen Yang; CHIEN-HAO LIU ; Yu, Chi Hua; Chang, I. Ling; Lin, Tzy RongApplied Acoustics53
922023Gallium-doped Zinc Oxide with Silver Nanowire Transparent Electrode for Photovoltaic Applications by Atmospheric Pressure Plasma JetChou, Chih Yun; Luo, Yu Tang; Yeh, Ying Chin; Huang, Zhang Bo; Zhou, Zhehan; LI XU ; JIA-YANG JUANG Proceedings of the ASME 2023 32nd Conference on Information Storage and Processing Systems, ISPS 20230
932023A Thermal Displacement Prediction System with an Automatic LRGTVAC-PSO Optimized Branch Structured Bidirectional GRU Neural NetworkKuo, Ping Huan; Chen, Yen Wen; Hsieh, Tung Hsien; Wen-Yuh Jywe ; Yau, Her TerngIEEE Sensors Journal33
942023Deep Imitation Learning for Optimal Trajectory Planning and Initial Condition Optimization for an Unstable Dynamic SystemChen, Bo Hsun; PEI-CHUN LIN Advanced Intelligent Systems0
952023Measurement and Compensation Backlash Error for A Five-Axis Machine Tool by Computer Numerical ControlHsieh, Tung Hsien; Wen-Yuh Jywe ; Zhou, Yi Hao; Chien, Yu-Chen2023 IEEE 5th Eurasia Conference on IOT, Communication and Engineering, ECICE 2023
962023A visuo-haptic mixed reality manual milling training simulatorChuang, Tung Jui; Tsai, Y.-Y; SHANA SMITH Virtual Reality00
972023Growth of force chain network upon non-Bagnold transition of inclined surface granular flows via discrete element simulationTsai, Cheng Ting; Cheng, Chih Ying; FU-LING YANG Journal of Mechanics
982023A double-sided PDMS mold for double-sided embossing by rollersHsu, Ming Huai; YAO-YANG TSAI ; He, Jyun Wei; SEN-YEU YANG Microsystem Technologies0
992023Trilingual Conversation SystemWu, Hsuan Wei; Pan, Szu Han; HAN-PANG HUANG 2023 International Automatic Control Conference, CACS 2023
1002023Ultra-Light Reaction Wheel with Dual-layer rotor and Single-side Halbach Magnet Array for CubeSatLiu, Nai Wen; Hung, Kuo Yuan; Lyu, Bo Ting; SHIH-CHIN YANG 2023 IEEE Energy Conversion Congress and Exposition, ECCE 2023
1012023A CUSUM-based adaptive bearing fault features tracking method for RUL estimationYi, Chen Pei; Lin, Yi Jen; Ho, Ping Jui; Chung, Wei Der; Chou, Po Huan; SHIH-CHIN YANG 2023 IEEE Energy Conversion Congress and Exposition, ECCE 2023
1022023Adaptive Disturbance Input Decoupling for Galvo Motor based on Resonance Frequency EstimationLin, Yi Jen; Chou, Po Huan; SHIH-CHIN YANG 2023 IEEE Energy Conversion Congress and Exposition, ECCE 2023
1032023Design of Dual-Three-Phase Synchronous Reluctance Starter Generator for AircraftHung, Kuo Yuan; Liu, Nai Wen; SHIH-CHIN YANG 2023 IEEE Energy Conversion Congress and Exposition, ECCE 2023
1042023Horizontal Accuracy Monitoring System for Precision MachineryHsieh, Tung Hsien; Chien, Yu-Chen; Wen-Yuh Jywe 2023 IEEE 5th Eurasia Conference on IOT, Communication and Engineering, ECICE 2023
1052023Optimization of a Hybrid Power System Employing Solar and Load PredictionsHuang, Hsiao Tzu; Wang, Jian Zhi; FU-CHENG WANG 2023 62nd Annual Conference of the Society of Instrument and Control Engineers, SICE 2023
1062023Multiple Input Disturbance Decoupling: with Application to Vehicle Suspension DesignFU-CHENG WANG ; Lee, Chung Hsien2023 62nd Annual Conference of the Society of Instrument and Control Engineers, SICE 2023
1072023AI-guided OCD metrology for single HAR sub-micron via measurementYang, Fu Sheng; Fu, Zih Ying; LIANG-CHIA CHEN Proceedings of SPIE - The International Society for Optical Engineering00
1082023AI-guided optical-model-based superresolution for semiconductor CD metrologyLee, Wei Yun; LIANG-CHIA CHEN Proceedings of SPIE - The International Society for Optical Engineering00
1092023Fabrication of the low-residual-stress optical microstructure by using the simulation and practice strategies, in-mold induction heating system, and injection compression molding technologyHuang, Zhi Yu; Chiu, Chun Yang; Ke, Kun Cheng; SEN-YEU YANG Polymer Engineering and Science00
11020233-D optical microscopy with a new synthetic SFF algorithm to reconstruct surfaces with various specular and diffusive reflectanceChen, Yu Sheng; LIANG-CHIA CHEN International Journal of Advanced Manufacturing Technology11
1112023Smart Manufacturing Security Challenges and SolutionsHsu, Yu Shan; Yang, Ming Hour; Lin, I. An; YAO-YANG TSAI 2023 International Conference on Consumer Electronics - Taiwan, ICCE-Taiwan 2023 - Proceedings0
1122023AI-guided numerical-aperture-controlled scatterometry for measurement of deep HAR and thin-film structures with a large depth variationFu, Zih Ying; Yang, Fu Sheng; Wu, Min Ru; Hung, Yen Hung; LIANG-CHIA CHEN Proceedings of SPIE - The International Society for Optical Engineering0
1132023PROFILE SYNTHESIS OF PROFILED-FOLLOWER MECHANISMS USING THE INSTANT-CENTER METHODShao, Jing Yi; Yang, Wen Huei; Wu, Long Iong; KUAN-LUN HSU Proceedings of the ASME Design Engineering Technical Conference
1142023Risk Assessment and Enhancement Suggestions for Automated Driving Systems through Examining Testing Collision and Disengagement ReportsWu, Kuo Wei; WEN-FANG WU ; Liao, Chung Chih; Lin, Wei AnnJournal of Advanced Transportation00
1152023An Investigation into the Roughness and Film Thickness Effects on the Interfacial Thermal ResistanceLin, Jie Yin; MEI-JIAU HUANG Nanoscale and Microscale Thermophysical Engineering00
1162023Multiple Output Responses Decoupling: With Application to Vibration Suppression of Optical TablesLee, C. H.; FU-CHENG WANG Proceedings of the IEEE Conference on Decision and Control
1172023Motor Torque Control of Electric Assist Bike Considering External ResistancesHo, Ping Jui; Yi, Chen Pei; Lin, Yi Jen; Chung, Wei Der; Chou, Po Huan; Sie, Bo Huang; SHIH-CHIN YANG IECON Proceedings (Industrial Electronics Conference)
1182023Establishment of Real-Time Adaptive Control Strategy for Milling ParametersTai, Chih Ho; Tsai, Ying Te; KUAN-MING LI IEEE Access
1192023Metamorphic Cam Mechanism with a PR FollowerPan, Tung Hsin; KUAN-LUN HSU Mechanisms and Machine Science
1202023A Wheel to Leg Transformation Strategy in a Leg-Wheel Transformable RobotWang, Hua Yu; Chen, Liang Jie; Yu, Wei Shun; PEI-CHUN LIN IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM00
1212023Non-integral model-based scatterometry for single-structure OCD metrologyChein, Wei Hsin; Yang, Fu Sheng; Fu, Zi Ying; LIANG-CHIA CHEN Proceedings of SPIE - The International Society for Optical Engineering0
1222023An effective fingerprint orientation field estimation method using differential values of grayscale intensityShen, Ting Wei; Hsu, Mao Hsiu; Shen, Chun Hsu; WEN-FANG WU ; Lu, Yu Chiao; Chu, Chia ChunPeerJ Computer Science00
1232023Characterization of the interfacial friction properties in the hot stamping processLee, Chien Hsing; Hung, Ching Hua; Cheng, Yao Wei; ChiuHuang, Cheng Kai; FUH-KUO CHEN Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A00
1242023Theoretical, numerical and experimental investigation into vibration characteristics for composite structures of an annular membrane internally connected with a piezoceramic diskJi, Ming; Zhong, Jia Jin; YU-HSI HUANG ; Wu, Yi ChuangJournal of Mechanics
1252023Modularized Analysis of Kinematic and Mechanical Error for Planar Linkages Composed of Class 3 and Order 3 Assur GroupsKUAN-LUN HSU ; Chang, Ching HsiangInternational Journal of Precision Engineering and Manufacturing00
1262023Developing a dynamic obstacle avoidance system for autonomous mobile robots using Bayesian optimization and object tracking: Implementation and testingWu, Chung Hsin; KUEI-YUAN CHAN Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science00
1272023Development of Defocus Atomic Force Microscope (DeF-AFM)Cheng, Chung Hsiang; Wang, Wei Min; KUANG-YUH HUANG Smart Science00
1282023Novel Four-Phase Spherical Reaction Wheel Motor with Vector Control for Three-DOF CubeSat Attitude Determination and Control SystemLyu, Bo Ting; Lin, Yi Jen; SHIH-CHIN YANG ; Sie, Bo Huang; Chung, Wei DerIECON Proceedings (Industrial Electronics Conference)
1292023An innovative integrated approach to automatic defect detection system of cell phone case manufacturing in an empirical implementationLiao, Chao Chang; Hsu, Chih Ching; HONG-TSU YOUNG ; KUAN-MING LI Journal of Intelligent Manufacturing00
1302023AUGMENTED REALITY FOR THE POSITIONING OF FASTENERS AND ADHESIVES IN SHEET METAL JOINING PROCESSES IN THE AUTOMOTIVE INDUSTRYSchwenk, Rebecca; SHANA SMITH Proceedings of the ASME Design Engineering Technical Conference
1312023Pulsed Eddy Current Sensor for Cascade Electrical Conductivity and Thickness Estimation in Non-Ferrous Metal PlatesCHUN-YEON LIN ; Huang, Ren Yuan; Teng, Megan; Wu, Yi ChinIEEE Sensors Journal00
1322023Induction heating of dual magnetic particles embedded PDMS molds for roller embossing applicationsHsu, Ming Huai; YAO-YANG TSAI ; He, Jyun Wei; SEN-YEU YANG Microsystem Technologies23
1332023An Investigation of the Properties of 3D Printing Materials According to Additive Manufacturing Conditions Using Ultrasonic WavePark, Junpil; Choi, Sunho; Baek, Seoung ho; Park, Sang hu; YU-HSI HUANG ; Lee, JaesunInternational Journal of Precision Engineering and Manufacturing21
1342023The development of thermal error compensation on CNC machine tools by combining ridge parameter selection and backward elimination procedureChen, Chienchang; Dai, Hongjie; Lee, Chunghong; Hsieh, Tunghsien; Hung, Weicheng; Wen-Yuh Jywe International Journal of Advanced Manufacturing Technology
1352023System Identification and Force Estimation of a Grinding ToolSiao, Shang Ya; Chu, Yu Lin; PEI-CHUN LIN IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM00
1362023A Comparison of Outdoor 3D Reconstruction between Visual SLAM and LiDAR SLAMHong, Yi Tian; HAN-PANG HUANG 2023 International Automatic Control Conference, CACS 2023
1372023Modeling and Characteristic Analysis of Line-Start Synchronous Reluctance MotorLuo, Yu Chen; YEE-PIEN YANG CPE-POWERENG 2023 - 17th IEEE International Conference on Compatibility, Power Electronics and Power Engineering0
1382023Reliability of Electronic PackagingWEN-FANG WU ; Lu, Yi AnSpringer Handbooks00
1392023Accurate Robotic Posterior Capsule Polishing With Tissue StabilizationYU-HSIU LEE ; Lai, Yu Ting; Gerber, Matthew J.; Dodds, Jaime; Hubschman, Jean Pierre; Rosen, Jacob; Tsao, Tsu ChinIEEE/ASME Transactions on Mechatronics00
1402023Artificial-neural-network-assisted DUV scatterometry for OCD on HAR submicron structuresFu, Zih Ying; Chein, Wei Hsin; Yang, Fu Sheng; LIANG-CHIA CHEN Proceedings of SPIE - The International Society for Optical Engineering00
1412023The Tortuosity Effect on the Thermal Conductivity of Si NanowiresHong, Hao Jhan; MEI-JIAU HUANG Nanoscale and Microscale Thermophysical Engineering00
1422022A synthesis method of spatial over-constrained mechanisms based on kinematics of serial manipulatorsLee, Fu Hsiung; KUAN-LUN HSU Robotica00
1432022Innovative water-based dynamic liquid bubble membrane generation device for gas/vapour separationLin, Yi Chen; Setnickova, Katerina; Wang, David K.; Chu, Yi Fan; Sima, Vladimir; YA-YU CHIANG ; Uchytil, Petr; Tseng, Hui HsinChemical Engineering Journal11
1442022Impact of layer thickness on the operating characteristics of In2O3/ZnO heterojunction thin-film transistorsAlghamdi, Wejdan S.; Fakieh, Aiman; Faber, Hendrik; YEN-HUNG LIN; Lin, Wei Zhi; Lu, Po Yu; CHIEN-HAO LIU ; Salama, Khaled Nabil; Anthopoulos, Thomas D.Applied Physics Letters33
1452022Characterization analysis of 532 nm laser drilling of silicon-based glass heterogeneous integration compositesLin, Che Shu; Tai, Chih Ho; Chen, Rou Jhen; KUAN-MING LI ; HONG-TSU YOUNG ; Hsiao, Wen TseInternational Journal of Advanced Manufacturing Technology00
1462022Data-Driven Iterative Learning Control of Nonlinear Systems by Adaptive Model MatchingYU-HSIU LEE ; Rai, Sandeep; Tsao, Tsu ChinIEEE/ASME Transactions on Mechatronics21
1472022Development and application of a robotic manipulator system utilizing null-space control for three-dimensional printingLin, Wei Zhi; HAN-PANG HUANG ; CHUN-YEON LIN International Journal of Advanced Manufacturing Technology00
1482022Industrial Anomaly Detection with Skip Autoencoder and Deep Feature ExtractorTang, Ta Wei; Hsu, Hakiem; Huang, Wei Ren; KUAN-MING LI Sensors23
1492022Potential Value of Patents With Provisional Applications: An Assessment of Bibliometric ApproachZhao, Star X.; DAR-ZEN CHEN ; MU-HSUAN HUANG ; YU-WEI CHANG IEEE Transactions on Engineering Management2
1502022Beam buckling analysis in peridynamic frameworkYang, Zhenghao; Naumenko, Konstantin; Altenbach, Holm; CHIEN-CHING MA ; Oterkus, Erkan; Oterkus, SeldaArchive of Applied Mechanics64
1512022Integration of Measurement Vector Insertion With Discontinuous PWM to Improve Saliency-Based Sensorless Drive Position EstimationChen, Jyun You; Hung, Kuo Yuan; Chen, Guan Ren; SHIH-CHIN YANG IEEE Transactions on Power Electronics31
1522022Development of a Visual Perception System on a Dual-Arm Mobile Robot for Human-Robot InteractionWeng, Wei Ting; HAN-PANG HUANG ; Zhao, Yu Lin; CHUN-YEON LIN Sensors32
1532022Development of a 2-DOF Spherical Joint with Extended Range of Motion Achieves Continuous RotationLiu, Chun; Chang, Wei Jer; PEI-CHUN LIN Mechanism and Machine Theory10
1542022Real-time master-based feedrate scheduling with kinematic constraints for five-axis machiningTang, Pu Yang; Lin, Ming Tsung; MENG-SHIUN TSAI International Journal of Advanced Manufacturing Technology00
1552022Some closed form series solutions to peridynamic plate equationsYang, Zhenghao; Naumenko, Konstantin; CHIEN-CHING MA ; Altenbach, Holm; Oterkus, Erkan; Oterkus, SeldaMechanics Research Communications52
1562022Laser surface modification on rGO/ZnO composite materials for NO2 gas sensingLin, Che Shu; Hsieh, Hsin Fang; CHIEN-FANG DING ; KUAN-MING LI ; HONG-TSU YOUNG ; Hsiao, Wen TseMaterials Chemistry and Physics55
1572022Superelasticity and elastocaloric effect of Ti-rich TiNi shape memory ribbonCheng, Yu; Ting, Yu Yung; CHIH-HSUAN CHEN Materials Science and Engineering A55
1582022Spring efficiency assessment and efficient use of spring methods of statically balanced planar serial manipulators with revolute joints onlyJuang, Chia Wei; Jhuang, Chi Shiun; DAR-ZEN CHEN Mechanical Sciences22
1592022Some analytical solutions to peridynamic beam equationsYang, Zhenghao; Naumenko, Konstantin; Altenbach, Holm; CHIEN-CHING MA ; Oterkus, Erkan; Oterkus, SeldaZAMM Zeitschrift fur Angewandte Mathematik und Mechanik75
1602022Optimized System Identification of Humanoid Robots with Physical Consistency Constraints and Floating-based Exciting MotionsLee, Astra Chun Hui; Hsu, Huan Kun; HAN-PANG HUANG International Journal of Humanoid Robotics00
1612022Development and experimental verification of radial-axial integrated cup-shaped aerostatic bearing for miniature turbine of dental handpieceTing, Guan Chung; YU-HSIU LEE ; KUANG-YUH HUANG Tribology International32
1622022Structural health monitoring of a linear robot by fiber Bragg grating sensors and cyber-physical systemHo, Hsiang Wei; Liao, Wei Hsiang; Chang, Ching Yuan; CHIEN-CHING MA International Journal of Advanced Manufacturing Technology11
1632022Novel treatment for hypotonic airway obstruction and severe obstructive sleep apnea using a nasopharyngeal airway device with 3D printing innovationPowell, Allison R; Srinivasan, Sudharsan; Helman, Jennifer L; DIAN-RU LI ; O'Brien, Louise M; Shih, Albert; Plott, Jeff S; Zopf, David AJournal of clinical sleep medicine : JCSM : official publication of the American Academy of Sleep Medicine11
1642022Open-source controller for low-cost and high-speed atomic force microscopy imaging of skin corneocyte nanotexturesHSIEN-SHUN LIAO ; Akhtar, Imtisal; Werner, Christian; Slipets, Roman; Pereda, Jorge; Wang, Jen Hung; Raun, Ellen; Nørgaard, Laura Olga; Dons, Frederikke Elisabet; Hwu, Edwin En TeHardwareX33
1652022Spring Configurations and Attachment Angles Determination for Statically Balanced Planar Articulated ManipulatorsJuang, Chia Wei; DAR-ZEN CHEN Journal of Mechanisms and Robotics42
1662022A Study on Hot Stamping of Tailor Welded BlanksLee, Chien Hsing; Hung, Ching Hua; Lee, Ping Kun; Chiuhuang, Cheng Kai; FUH-KUO CHEN Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao0
1672022A Reduced-Order-Model-Based Motion Selection Strategy in a Leg-Wheel Transformable RobotWang, Ting Hao; PEI-CHUN LIN IEEE/ASME Transactions on Mechatronics43
1682022Experimental results and mathematical formulation of non-spinning stone-skipping processTsai, Hsuan-Wei; Tsai, Hsieh-Chen; WEN-FANG WU ; Lai, Chun-LiangScientific reports11
1692022A note on determination of center of disk-cam curvatureKUAN-LUN HSU ; Hsu, Tai YenMeccanica00
1702022Superior gait performance and balance ability in Latin dancersLiu, Yen Ting; Lin, Ang Chieh; Chen, Szu Fu; Shih, Chih Jen; Kuo, Tien Yun; FU-CHENG WANG ; Lee, Pei Hsin; Lee, Adeline PeilingFrontiers in Medicine53
1712022Continuous low surface tension and high viscosity two phases liquid separationWang, Xi Lun; Ni, Can Hong; Chang, Jun Wei; YA-YU CHIANG Sensors and Actuators B: Chemical21
1722022Design of disk cam mechanisms with a translating follower having symmetrical double-concave facesChuang, Yu Hsuan; KUAN-LUN HSU ; Chang, Wen TungJournal of Mechanical Science and Technology00
1732022A Comparative Study of Virtual Footwear Try-On Applications in Virtual and Augmented RealityChu, Chih Hsing; Chen, Yi An; YING-YIN HUANG ; Lee, Yun JuJournal of Computing and Information Science in Engineering43
1742022Real-Time Reflectance Measurement Using an Astigmatic Optical ProfilometerHSIEN-SHUN LIAO ; Huang, Ya Kang; Syu-Gu, Jian Yuan; Hwu, En TeSensors00
1752022Enhancement of Vibration Energy Harvesting Performance by Omni-Directional INVELOX Wind Funnel: A Computational StudyOng, Zhi Chao; Kong, Keen Kuan; Khoo, Shin Yee; Chew, Bee Teng; YU-HSI HUANG Applied Sciences (Switzerland)00
1762022Applied IrO2 Buffer Layer as a Great Promoter on Ti-Doping V2O5 Electrode to Enhance Electrochromic Device PropertiesKo, Tien Fu; Chen, Po Wen; KUAN-MING LI ; HONG-TSU YOUNG Materials45
1772022A Water Balloon as an Innovative Energy Storage MediumCHUN-TI CHANG ; Huang, Pin TuanPolymers22
1782022Photothermal Thin Films with Highly Efficient NIR Conversion for Miniaturized Liquid-Crystal Elastomer ActuatorsWang, Wei Yi; Lin, Bo You; Liao, Yen Peng; YAO-JOE YANG Polymers11
1792022Investigations on Temperatures of the Flat Insert Mold Cavity Using VCRHCS with CFD SimulationWang, Rong Tsu; Wang, Jung Chang; SIH-LI CHEN Polymers11
1802022Low-Frequency Vibration Sensor with Dual-Fiber Fabry–Perot Interferometer Using a Low-Coherence LEDWang, Mu Chun; Chao, Shou Yen; CHUN-YEON LIN ; Chang, Cheng Hsun Tony; Lan, Wen HowCrystals77
1812022Ultraviolet Laser Sintering of Printed Nickel Oxide Nanoparticles for Thin-Film Thermistor via Aerosol Jet Printing TechnologyChang, Yi Tse; Hung, Kuan Yi; Chien, Chih Hsuan; HONG-TSU YOUNG ; Hsiao, Wen Tse; KUAN-MING LI Applied Sciences (Switzerland)00
1822022An analysis of the rolling dynamics of a hexapod robot using a three-dimensional rolling templateChang, I. Chia; Hsu, Chih Hsiang; Wu, Hong Sheng; PEI-CHUN LIN Nonlinear Dynamics22
1832022Effects of viewing distance and age on the performance and symptoms in a visual search task in augmented realityYING-YIN HUANG ; Menozzi, MarinoApplied Ergonomics43
1842022Reduced graphene oxide films for reducing hotspot temperatures of electronic devicesHuang, Ding Jun; Peng, Wei Tsu; Lee, Yen Ta; MING-CHANG LU International Communications in Heat and Mass Transfer11
1852022Measurement of Orthotropic Material Constants and Discussion on 3D Printing Parameters in Additive ManufacturingYU-HSI HUANG ; Lin, Chun YiApplied Sciences (Switzerland)00
1862022An Image-Based Data-Driven Model for Texture Inspection of Ground WorkpiecesWang, Yu Hsun; Lai, Jing Yu; Lo, Yuan Chieh; Shih, Chih Hsuan; PEI-CHUN LIN Sensors10
1872022Effective Free‐Driving Region Detection for Mobile Robots by Uncertainty Estimation Using RGB‐D DataNguyen, Toan Khoa; Nguyen, Phuc Thanh Thien; Nguyen, Dai Dong; CHUNG-HSIEN KUO Sensors21
1882022Optimal thrust efficiency for a tandem wing in forward flight using varied hindwing kinematics of a damselflyLai, Yu Hsiang; SHENG-KAI CHANG; Lan, Bluest; KUAN-LUN HSU ; JING-TANG YANG Physics of Fluids33
1892022Grooved Cam Mechanism With a Translating Follower Having an Added Ternary-Roller Intermediate LinkKUAN-LUN HSU ; Pan, Tung Hsin; Wu, Long IongJournal of Mechanical Design, Transactions of the ASME11
1902022Design and implementation of a novel spherical robot with rolling and leaping capabilityChang, Wei Jer; Chang, Chih Ling; Ho, Jen Hung; PEI-CHUN LIN Mechanism and Machine Theory52
1912022Reducing Contact Time of Droplets Impacting Superheated Hydrophobic SurfacesHuang, Chung Te; Lo, Ching Wen; MING-CHANG LU Small65
1922022Metal- and Alloy-Based Core-Shell Particles in Nitrate Senary Salt with Low Thermal Hysteresis for Solar Thermal Energy StorageChen, Kai; Chung, Feng Ju; Lin, Yen Ling; Lee, Yen Ta; Rodríguez-Laguna, María del Rocío; Manikandan, Arumugam; MING-CHANG LU ; Chueh, Yu LunACS Applied Energy Materials00
1932022Development of a Grinding Tool with Contact-Force Control CapabilityLin, Yu Heng; Liu, Ming Wei; PEI-CHUN LIN Electronics (Switzerland)22
1942022A model-based strategy for quadruped running with differentiated fore-and hind-leg morphologiesTseng, Kuan Yu; PEI-CHUN LIN Bioinspiration and Biomimetics74
1952022Grinded Surface Roughness Prediction Using Data-Driven Models with Contact Force InformationLai, Jing Yu; PEI-CHUN LIN IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM10
1962022Accuracy-enhanced diffraction image profilometry using foreign aberration for resolving image ambiguityWu, Guo Wei; LIANG-CHIA CHEN Proceedings of SPIE - The International Society for Optical Engineering00
1972022Electromagnetic Tracking System Design for Location and Orientation EstimationWu, Yi Chin; Ma, His Yen; Kuo, Zhong Hsiang; Teng, Megan; CHUN-YEON LIN IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM10
1982022A Computational Approach for Cam Design Parameters Optimization of Disk Cam Mechanisms with Oscillating Roller FollowerPan, Tung Hsin; Chang, Ching Hsiang; Lin, Po Ting; KUAN-LUN HSU International Conference on Advanced Robotics and Intelligent Systems, ARIS00
1992022Tuning the roughness of aluminum surfaces for superrepellency and absorptivityCHUN-TI CHANG ; Bhak, Andrew J.; Hanggi, Daniel J.; Kemler, Kayla M.; Malkani, Arnav S.; Kang, Edward W.Journal of Mechanics00
2002022Design and Testing of a Bearingless Piezo Jet Micro HeatsinkWang, Rong Tsu; Wang, Jung Chang; SIH-LI CHEN Journal of Marine Science and Technology (Taiwan)22
2012022New critical dimension optical metrology for submicron high-aspect-ratio structures using spectral reflectometry with supercontinuum laser illuminationChein, Wei Hsin; Yang, Fu Sheng; Thakur, Komal; Wu, Guo Wei; LIANG-CHIA CHEN Proceedings of SPIE - The International Society for Optical Engineering20
2022022Sensorless Disturbance Rejection for High-Precision Permanent Magnet Motor Motion SystemLin, Yi Jen; Chou, Po Huan; Hsu, Wei Chieh; Wu, Chi Jun; SHIH-CHIN YANG 2022 IEEE Energy Conversion Congress and Exposition, ECCE 202200
2032022Development of Liquid-Liquid Phase Separator for Continuous Aspirin ProcessLu, Guan Yu; Ni, Can Hong; YA-YU CHIANG MicroTAS 2022 - 26th International Conference on Miniaturized Systems for Chemistry and Life Sciences0
2042022PREDICTING BIPHASIC FLOW SEPARATIONChang, Yi Chieh; Chen, Yu-Jen; Ho, Tsung Yi; YA-YU CHIANG MicroTAS 2022 - 26th International Conference on Miniaturized Systems for Chemistry and Life Sciences0
2052022INTEGRATED MICROFLUIDIC CHIP FOR AUTOMATED AND CONTINUOUS PHAGE SELECTIONHuang, Pin Ru; Sie, Zong Han; Huang, Shin Tsung; Tsai, Bor Yu; YA-YU CHIANG MicroTAS 2022 - 26th International Conference on Miniaturized Systems for Chemistry and Life Sciences0
2062022Design of Satellite Reaction Wheel with Flexible PCB Windings for Angular Momentum OptimizationLiu, Nai Wen; Hung, Kuo Yuan; Lin, Yi Jen; SHIH-CHIN YANG 2022 IEEE Energy Conversion Congress and Exposition, ECCE 202200
2072022CONTINUOUS HIGH-VISCOSITY BiPHASIC FLOW SEPARATIONYang, Hsiang Yu; Chen, Yu Chieh; YA-YU CHIANG MicroTAS 2022 - 26th International Conference on Miniaturized Systems for Chemistry and Life Sciences0
2082022The Application of Dual-arm Mobile Robot Systems in the Care of the Older AdultsWeng, Wei Ting; HAN-PANG HUANG ; Zhao, Yu LinICSSE 2022 - 2022 International Conference on System Science and Engineering00
2092022Development of a dynamic model of the 11-linkage and closed-chain leg-wheel moduleLiu, Yu Ju; PEI-CHUN LIN IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM10
2102022Amyotrophic Lateral Sclerosis Patients Regain Head-Neck Control Using a Powered Neck ExoskeletonZhang, Haohan; BIING-CHWEN CHANG ; Kulkarni, Priya; Andrews, Jinsy; Shneider, Neil A.; Agrawal, SunilProceedings of the IEEE RAS and EMBS International Conference on Biomedical Robotics and Biomechatronics20
2112022Gait Pattern Stabilization using Central Pattern Generator with Foothold Force Optimization for Quadruped RobotsChen, Liang Jie; PEI-CHUN LIN IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM10
2122022Change in Muscle Synergies during Stairmill Ascent with External Forces on the PelvisBIING-CHWEN CHANG ; Agrawal, Sunil K.Proceedings of the IEEE RAS and EMBS International Conference on Biomedical Robotics and Biomechatronics00
2132022RC Filter Free Flux-based Sensorless BLDC Drive for Permanent Magnet Motor using Pulse Amplitude ModulationSong, Ik Tiat; Huang, Ching Lon; Chen, Yi En; SHIH-CHIN YANG 2022 IEEE Energy Conversion Congress and Exposition, ECCE 202200
2142022A passive planar model with rolling contact and its application for bounding and pronking on a quadruped robotHuang, C. K.; Hu, Chia Jui; Chang, I. Chia; PEI-CHUN LIN Journal of Mechanics11
2152022Uniform and Localized Magnet Demagnetization Detection of Permanent Magnet Motor based on On-line Flux EstimationYi, Chen Pei; Ho, Ping Jui; Liu, Chia Jung; Lee, Feng Chi; SHIH-CHIN YANG 2022 IEEE Energy Conversion Congress and Exposition, ECCE 202200
2162022CONTINUOUS BIODIESEL PRODUCTION USING SERIES MICROREACTORSWang, Cheng Yu; Chen, Po Ying; YA-YU CHIANG MicroTAS 2022 - 26th International Conference on Miniaturized Systems for Chemistry and Life Sciences0
2172022Analytical Solution of 1-Dimensional Peridynamic Equation of MotionYang, Zhenghao; CHIEN-CHING MA ; Oterkus, Erkan; Oterkus, Selda; Naumenko, KonstantinJournal of Peridynamics and Nonlocal Modeling00
2182022Analytical Solution of the Peridynamic Equation of Motion for a 2-Dimensional Rectangular MembraneYang, Zhenghao; CHIEN-CHING MA ; Oterkus, Erkan; Oterkus, Selda; Naumenko, Konstantin; Vazic, BozoJournal of Peridynamics and Nonlocal Modeling00
2192022Identifying distinct oxygen diffusivity through type I pneumocyte-like cell layers using microfluidic deviceTung, Yi-Chung; Wang, Chien-Kai; Huang, Yung-Kang; Huang, Cheng-Kai; Peng, Chien-Chung; Patra, Bishnubrata; Chen, Hung-Kuan; PO-NIEN TSAO ; CHIEN-KAI WANG Talanta11
2202022Performance investigation of a hybrid ground-assisted desiccant cooling systemLiang J.-D; Kao C.-L; Tsai L.-K; Chiang Y.-C; HSIEH-CHEN TSAI ; SIH-LI CHEN Energy Conversion and Management65
2212022Precision positioning control of a long-stroke stage employing multiple switching controlFU-CHENG WANG ; Lu, J.-F.; WEI-JIUN SU ; JIA-YUSH YEN Microsystem Technologies13
2222022Meta-lens light-sheet fluorescence microscopy for in vivo imagingYUAN LUO ; Tseng, Ming Lun; Vyas, Sunil; Hsieh, Ting-Yu; JUI-CHING WU ; Chen, Shang-Yang; Peng, Hsiao-Fang; Su, Vin-Cent; Huang, Tzu-Ting; Kuo, Hsin Yu; Chu, Cheng Hung; Chen, Mu Ku; Chen, Jia-Wern; Chen, Yu-Chun; KUANG-YUH HUANG ; CHIEH-HSIUNG KUAN ; Shi, Xu; Misawa, Hiroaki; Tsai, Din PingNanophotonics1412
2232022Performance enhancement of intermittent spray cooling with a self-rewetting fluid for relatively high-temperature applicationsCHIU-HSUN LIN ; Kuo, CW; Sun, CL; CHEN-LI SUN INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER64
2242022A visuo-haptic extended reality–based training system for hands-on manual metal arc welding trainingShankhwar K; Chuang T.-J; Tsai Y.-Y; SHANA SMITH International Journal of Advanced Manufacturing Technology44
2252022Compressive stress-induced martensitic transformation and elastocaloric effect in Cu-Al-Mn single-crystal alloyLu N.-H; CHIH-HSUAN CHEN Materials Science and Engineering A77
2262022Morphology, ligament strength, and energy absorption of nanoporous copper via vapor phase dealloyingHsieh, SR; Lu, NH; CHIH-HSUAN CHEN ; YUEH-LIEN LEE ; I-Chung Cheng MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING22
2272022Whole-body momentum control with linear quadratic state incremental walking pattern generation and a centroidal moment pivot balancing strategy for humanoid robotsHsu H.-K; Wang Y.-H; HAN-PANG HUANG Advanced Robotics10
2282022Degradation Observations of Protective Coatings: An Improved Version of Coating Impedance DetectorLiao H.-C; Cai Z.-H; Chen H.-H; Chung C.-H; I-Chung Cheng ; YUEH-LIEN LEE IEEE Access00
2292022Microstructure and Superelastic Properties of FeNiCoAlTi Single Crystals with the <100> Orientation under TensionTseng L.-W; CHIH-HSUAN CHEN ; Tzeng Y.-C; Lee P.-Y; Lu N.-H; Chumlyakov Y.Crystals23
2302022Gait Training for Hemiplegic Stroke Patients: Employing an Automatic Neural Development Treatment Trainer with Real Time DetectionFU-CHENG WANG ; Chen S.-F; Li Y.-C; Shih C.-J; Lin A.-C; Lin T.-T.Applied Sciences (Switzerland)11
2312022High-Resolution Permanent Magnet Drive Using Separated Observers for Acceleration Estimation and ControlLin Y.-J; Chou P.-H; Yang S.-C.; SHIH-CHIN YANG Sensors
2322022A dual-arm manipulation strategy using position/force errors and Kalman filterYang W.-T; Chen B.-H; Lin P.-C.; PEI-CHUN LIN Transactions of the Institute of Measurement and Control
2332022Single-step process for transparent conductive ZnO:Ga films with uniform ultrahigh haze by oblique angle depositionLee Y.-C; JIA-YANG JUANG Journal of the European Ceramic Society64
2342022Synthesis of bimetallic catalysts using Ag extracted from end-of-life solar modules supported on nanoporous Cu for electrochemical CO2 reductionHung C.-W; Wang C.-C; Li W.-J; I-Chung Cheng Journal of Physics and Chemistry of Solids11
2352022Phase formations and microstructures of Ti20Zr15Hf15Ni35Cu15 high-entropy shape memory alloy under different aging conditionsChang Y.-T; Lee M.-H; Chu M.-W; CHIH-HSUAN CHEN Materials Today Advances33
2362022Comparison of k-wire insertion using oscillatory and unidirectional drilling modes under constant thrust forceChen L; Li A.D.R; Symonds C; Holmes J.R; Weick J.W.; DIAN-RU LI Journal of Orthopaedic Research32
2372022Change in Muscle Synergies During Stairmill Ascent With External Forces on the PelvisBIING-CHWEN CHANG ; Agrawal S.K.IEEE Robotics and Automation Letters11
2382022New machine functions using waste heat recovery: A case study of atmospheric pressure plasma jetHsu P.-C; Saragih A.A; Huang M.-J; JIA-YANG JUANG Energy21
2392022Functional connections between bird eggshell stiffness and nest characteristics through risk of egg collision in nestsHung C.-M; Tsao S.-H; Chiang P.-L; Wu S.-P; Tuanmu M.-N; JIA-YANG JUANG Ecology Letters75
2402022Design and development of a high-performance tensile-mode piezoelectric energy harvester based on a three-hinged force-amplification mechanismChang H.-L; WEI-JIUN SU Smart Materials and Structures11
2412022Analytical solution for the vibration characteristics of a partially immersed plate with experimental investigation on wet mode shapesChen G.-W; Liao C.-Y; Lin Y.-Z; Lee K.-T; CHIEN-CHING MA Applied Mathematical Modelling23
2422022Induction heating ferromagnetic particles embedded PDMS mold for microstructure embossingHsu M.-H; YAO-YANG TSAI ; SEN-YEU YANG Journal of Physics Communications11
2432022Motion modeling of cable-driven continuum robots using vector form intrinsic finite element methodWang M.-L; Kuo I.-H; JYH-JONE LEE Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A11
2442022Evaluating hydrogenated nickel-titanium alloy for orthopedic implantNguyen T.-T; Hu C.-C; Chou B.-Y; Chou C.-Y; Lin G.-Y; Hu Y.-C; Chen Y.-L; Hsu W.-T; Lin Z.-S; YUEH-LIEN LEE ; CHIH-HSUAN CHEN ; HUNG-WEI YEN ; Chung R.-J.Journal of Materials Research and Technology11
2452022Design and Implementation of a Door Latch Unlocking MechanismLin C.-M; Chen Y.-H; Hsu K.-L.; KUAN-LUN HSU Mechanisms and Machine Science
2462022Metaheuristic minimum dose path planning for nuclear power plant decommissioningLai Y.-C; Smith S.; SHANA SMITH Annals of Nuclear Energy
2472022An interactive extended reality-based tutorial system for fundamental manual metal arc welding trainingShankhwar K; Smith S.; SHANA SMITH Virtual Reality
2482022Laser Patterning Technology Based on Nanosecond Pulsed Laser for Manufacturing Bifacial Perovskite Solar ModulesLin B.-Q; Huang C.-P; Tian K.-Y; Lee P.-H; Su W.-F; Xu L.; LI XU International Journal of Precision Engineering and Manufacturing - Green Technology
2492022Aerosol jet printing of nickel oxide nanoparticle ink with ultraviolet radiation curing for thin-film temperature sensorsChang Y.-T; Hung K.-Y; Young H.-T; Li K.-M; Chen R.K.; KUAN-MING LI International Journal of Advanced Manufacturing Technology
2502022High haze Ga and Zr co-doped zinc oxide transparent electrodes for photovoltaic applicationsWu C.-Y; Chiu L.-C; Juang J.-Y.; JIA-YANG JUANG Journal of Alloys and Compounds
2512022Facile preparation of hazy Ga-doped ZnO electrodes by atmospheric pressure plasma jetHsu P.-C; Juang J.-Y.; JIA-YANG JUANG Applied Surface Science
2522022The size effect on the interfacial thermal resistances of sandwich structuresHuang M.-J; Tsai P.-K.; MEI-JIAU HUANG International Journal of Heat and Mass Transfer
2532022Ring droplet formation during evaporation of a sessile water droplet on a biphilic surfaceCheng H.-C; Li C.-H; Chang T.-L; Chen P.-H.; PING-HEI CHEN International Journal of Heat and Mass Transfer
2542022Exploring perception of retraction based on mentioned status in post-retraction citationsLiu X; Wang C; DAR-ZEN CHEN ; Huang M.-H.Journal of Informetrics22
2552022Theoretical analysis by Mindlin theory and experimental measurements of the piezoceramic circular bimorphs in resonanceHuang Y.-H ; Lin Y.-C; Huang C.-H; Cheng-Chi Li; CHIEN-CHING MA International Journal of Mechanical Sciences
2562022Early Detection of Parkinson's Disease by Neural Network ModelsCHIN-HSIEN LIN ; FU-CHENG WANG ; Kuo T.-Y.; Huang P.-W.; Chen S.-F.; Fu L.-C.IEEE Access147
2572022Channel Mobility Model of Nano-Node MOSFETs Incorporating Drain-and-Gate Electric FieldsChao S.-Y; Huang H.-S; Huang P.-R; CHUN-YEON LIN ; Wang M.-C.Crystals32
2582022The Association between Influenza Vaccination and Stroke Risk in Patients with Hypertension: A Nationwide Population-Based StudyLin C.-H; Chiu C.-C; Yang T.-Y; Fang Y.-A; Lei M.-H; Yeh H.-T; Chen C.-C; Hao W.-R; CHUNG-HSIEN KUO ; Liu J.-C.Applied Sciences (Switzerland)00
2592022Improving Image Quality Assessment Based on the Combination of the Power Spectrum of Fingerprint Images and Prewitt FilterShen T.-W; Li C.-C; Lin W.-F; Tseng Y.-H; WEN-FANG WU ; Wu S; Tseng Z.-L; Hsu M.-H.Applied Sciences (Switzerland)22
2602022Hygrothermal Damage Monitoring of Composite Adhesive Joint Using the Full Spectral Response of Fiber Bragg Grating SensorsShin C.-S; Lin T.-C.; CHOW-SHING SHIN Polymers
2612022Dynamics and Stability of Axially Loaded Elastic RodsMorozov N.F; Belyaev A.K; Tovstik P.E; Tovstik T.P; CHIEN-CHING MA Advanced Structured Materials
2622022Evolutions of superelasticity and elastocaloric effect of Ti50Ni48Fe2 and aged-hardened Ni-rich Ti49.2Ni49.3Fe1.5 shape memory alloys under cyclic compressive deformationLee H.-C; Shen J.-J; Chang Y.-T; Wu C.-T; CHIH-HSUAN CHEN Journal of Alloys and Compounds
2632022A novel total-flow geothermal power generator using Turgo turbine: Design and field testsLin T.-Y; Ko C.-Y; Chen S.-J; Tsai G.C; Tsai H.-C.; HSIEH-CHEN TSAI Renewable Energy
2642022Self-organizing Ag-decorated nanoporous Cu by dealloying processLee Y.-S; Sun Y.-H; Cheng I.-C.; I-Chung Cheng Scripta Materialia
2652022Flow reversal triggers discontinuous shear thickening response across an erodible granular bed in a Couette-Poiseuille-like flowLee K.-L; FU-LING YANG Physical Review E11
2662022Passive solute separation in AC electroosmosis including surface charge-coupled hydrodynamic slip effectsHuang H.-F; Kuo J.-E; Huang K.-H.; HSIN-FU HUANG Electrophoresis00
2672022Method for Film Thickness Mapping with an Astigmatic Optical ProfilometerHSIEN-SHUN LIAO ; Cheng S.-H; Hwu E.-T.Sensors11
2682022Revealing anisotropic elasticity of endothelium under fluid shear stressKo P.-L; CHIEN-KAI WANG ; Hsu H.-H; Lee T.-A; Tung Y.-C.Acta Biomaterialia31
2692021Thermal conductivity and electrical resistivity of single copper nanowiresPeng, Wei Tsu; Chen, Fu Ren; MING-CHANG LU Physical Chemistry Chemical Physics32
2702021An affordable and tunable continuous wrinkle micropattern for cell physical guidance studyChang, Yen Yu; Jiang, Bing Cheng; Chen, Po Ying; YA-YU CHIANG Journal of the Taiwan Institute of Chemical Engineers22
2712021Scale-out production in core-annular liquid–liquid microextractorLin, Cheng Yan; Chen, Yung Ying; Chen, Po Ying; Chen, Mei Chun; Su, Tyng Fwu; YA-YU CHIANG Journal of Flow Chemistry31
2722021Suppressing Breakups in Binary Droplet Collisions by SurfactantHuang, Kuan Ling; KUO-LONG PAN ; Chen, Jen ChunICLASS 2021 - 15th Triennial International Conference on Liquid Atomization and Spray Systems
2732021Wide-temperature antifouling characteristic of a double re-entrant pillar array surfaceHuang, Chung Te; Lee, Meng Shiue; Lo, Ching Wen; Hsu, Wensyang; MING-CHANG LU International Journal of Heat and Mass Transfer22
2742021Asymmetric boundary conditions and their relevance in minimal passive mass species transport in time-periodic electro-osmotic flowsHSIN-FU HUANG ; Huang, Kun Hao; Kuo, Ju EnAIP Advances11
2752021Analytical nonlocal model for shear localization in wall-bounded dense granular flowLee, Keng Lin; Artoni, Riccardo; FU-LING YANG ; Richard, PatrickPowders and Grains 2021 - 9th International Conference on Micromechanics on Granular Media
2762021Study 3D Endothelial Cell Network Formation under Various Oxygen Microenvironment and Hydrogel Composition Combinations Using Upside-Down Microfluidic DevicesHsu, Heng Hua; Ko, Ping Liang; HSIAO-MEI WU ; Lin, Hsi Chieh; CHIEN-KAI WANG ; Tung, Yi ChungSmall1011
2772021Frosting and defrosting on the hydrophilic nylon-6 nanofiber membrane–coated surfacesLo, Ching Wen; Li, Jia Xiong; MING-CHANG LU Applied Thermal Engineering118
2782021Sol–gel-derived hierarchically wrinkled mesoporous ceramics for enhancement of cell alignmentXie, Yi Ting; Chen, Jun Rong; Chen, Yu Ting; Jiang, Bing Cheng; Sie, Zong Han; Hsu, Han Yi; Chen, Ting Lun; YA-YU CHIANG ; Hsueh, Han YuChemical Engineering Journal1612
2792021A core-annular liquid–liquid microextractor for continuous processingYu, Zheng Xin; Wang, Xi Lun; Chang, Yu Lung; Lin, Cheng Yan; Chang, Yi Chieh; YA-YU CHIANG Chemical Engineering Journal76
2802021Electrorotation of single microalgae cells during lipid accumulation for assessing cellular dielectric properties and total lipid contentsLin, Yu-Sheng; Tsang, Sung; Bensalem, Sakina; Tsai, Ching-Chu; Chen, Shiang-Jiuun ; CHEN-LI SUN ; Lopes, Filipa; Le Pioufle, Bruno; Wang, Hsiang-YuBiosensors & bioelectronics66
2812021CONTINUOUS PHAGE SELECTION BY INTEGRATED MICROFLUIDIC CHIPSie, Zong Han; YA-YU CHIANG MicroTAS 2021 - 25th International Conference on Miniaturized Systems for Chemistry and Life Sciences0
2822021Record the Single Cell Signal PathwayYA-YU CHIANG Handbook of Single-Cell Technologies00
2832021A LIQUID-LIQUID PHASE SEPARATORWang, Xi Lun; Srinophakun, Penjit; YA-YU CHIANG MicroTAS 2021 - 25th International Conference on Miniaturized Systems for Chemistry and Life Sciences0
2842021A novel neck brace to characterize neck mobility impairments following neck dissection in head and neck cancer patientsBIING-CHWEN CHANG ; Zhang, Haohan; Long, Sallie; Obayemi, Adetokunbo; Troob, Scott H.; Agrawal, Sunil K.Wearable Technologies10
2852021Airy light sheet microscope for in-vivo imaging of C. elegansHsu, Hung Chuan; Vyas, Sunil; KUANG-YUH HUANG ; HSIEN-SHUN LIAO ; YUAN LUO Proceedings of SPIE - The International Society for Optical Engineering00
2862021Welcome to the 25th International Conference on Miniaturized Systems for Chemistry and Life SciencesGervais, Thomas; Park, Tae Eun; YA-YU CHIANG ; Pompano, Rebecca; Swami, Nathan; Hei, Mei; Juncker, David; Sochol, RyanMicroTAS 2021 - 25th International Conference on Miniaturized Systems for Chemistry and Life Sciences0
2872021Electropolymerized Poly(3,4-ethylenedioxythiophene)/Screen-Printed Reduced Graphene Oxide-Chitosan Bilayer Electrodes for Flexible SupercapacitorsTseng, Chia Hui; Lin, Hsun Hao; Hung, Cheng Wei; I-Chung Cheng ; SHYH-CHYANG LUO ; I-CHUN CHENG ; JIAN-ZHANG CHEN ACS Omega1010
2882021Development of real-time transendothelial electrical resistance monitoring for an in vitro blood-brain barrier systemTu, Kai Hong; Yu, Ling Shan; Sie, Zong Han; Hsu, Han Yi; Al-Jamal, Khuloud T.; Wang, Julie Tzu Wen; YA-YU CHIANG Micromachines1715
2892021On the decrease in transformation stress in a bicrystal cu-al-mn shape-memory alloy during cyclic compressive deformationSu T.-H; Lu N.-H; Chen C.-H; CHUIN-SHAN CHEN ; CHIH-HSUAN CHEN Materials75
2902021Knowledge positioning of patent assigneesKuan C.-H; Chen D.-Z.; DAR-ZEN CHEN 18th International Conference on Scientometrics and Informetrics, ISSI 20210
2912021Characterizing patent assignees by their structural positions relative to a field's evolutionary trajectoryKuan C.-H; Lin J.-T; Chen D.-Z.; DAR-ZEN CHEN Journal of Informetrics30
2922021Dielectric barrier discharge plasma jet (Dbdjet) processed reduced graphene oxide/polypyrrole/chitosan nanocomposite supercapacitorsLiu C; Hung C.-W; JERRY CHENG-CHE HSU ; JIAN-ZHANG CHEN ; I-Chung Cheng ; I-CHUN CHENG Polymers1310
2932021Simultaneous enhancement of electrical conductivity, uniformity, and near-infrared transmittance via laser annealing on ZnO:Ga films deposited by atmospheric pressure plasma jetChen Y.-C; Hsu P.-C; Xu L; JIA-YANG JUANG ; LI XU Journal of Alloys and Compounds88
2942021Development of a dual-stage and visual-servo filming robotLiu L.-C; Yang P.-H; Liao S.-C; Li B.-P; Wang F.-C; FU-CHENG WANG ; PEI-CHUN LIN Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering20
2952021Magnetic plucked meso-scale piezoelectric energy harvester for low-frequency rotational motionChen C.T; WEI-JIUN SU ; WEN-JONG WU ; Vasic D; Costa F.Smart Materials and Structures66
2962021A propellant-free superconducting solenoid thruster driven by geomagnetic fieldKuo H.-W; Pan K.-L; KUO-LONG PAN Journal of Advanced Research11
2972021Design of a Bone-Guided Cochlear Implant Microsystem with Monopolar Biphasic Multiple Stimulations and Evoked Compound Action Potential Acquisition and Its in Vivo VerificationLiu C.-H; Wu, Chung-Yu; Ker, Ming-Dou; Liu, Chien-Hao ; Hung, Chung-Chih; Yang, Chia-Hsiang ; Lee, Chia-Fone; Chang, Po-Chih; Tu, Yen-Fu; Tang, Li-Yang; Chen, Ching-Yuan; CHIEN-HAO LIU IEEE Journal of Solid-State Circuits128
2982021Real-time detection of gait events by recurrent neural networksWang F.-C.; Li Y.-C.; Kuo T.-Y.; Chen S.-F.; FU-CHENG WANG IEEE Access55
2992021Industrial robot accurate trajectory generation by nested loop iterative learning controlLee Y.-H; Hsu S.-C; Chi T.-Y; Du Y.-Y; Hu J.-S; Tsao T.-C.; YU-HSIU LEE Mechatronics
3002021Precise 3-D microscopic profilometry using diffractive image microscopy and artificial neural network in single-exposure mannerWu G.-W; Chen L.-C.; LIANG-CHIA CHEN Optics and Lasers in Engineering
3012021Effects of difference in wettability level of biphilic patterns on copper tubes in pool boiling heat transferCheng H.-C; Jiang Z.-X; Chang T.-L; Chen P.-H.; PING-HEI CHEN Experimental Thermal and Fluid Science
3022021Legged robot running using a physics-data hybrid motion templateYang W.-S; Lu W.-C; Lin P.-C.; PEI-CHUN LIN IEEE Transactions on Robotics
3032021Real-time Corner Smoothing Based on FIR Filtering for CNC Machine ToolsTang P.-Y; Lin M.-T; Tsai M.-S.; MENG-SHIUN TSAI Proceedings of the 3rd IEEE Eurasia Conference on IOT, Communication and Engineering 2021, ECICE 2021
3042021Silver mirror reaction metallized chromatography paper for supercapacitor applicationChen I.-H; Chang J.-H; Xie R.-J; Tseng C.-H; Hsieh S.-R; Tsai J.-H; Cheng I.-C; Cheng I.-C; Chen C.-F; JIAN-ZHANG CHEN ; I-Chung Cheng ; CHIEN-FU CHEN ; I-CHUN CHENG Flexible and Printed Electronics20
3052021Measurement of boundary force and wall friction coefficient during the development of a granular discharge flow from a symmetric siloJiang M.-Z; Tsai J.-C; FU-LING YANG ; MING-ZHE JIANG Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A22
3062021Detection and classification of stroke gaits by deep neural networks employing inertial measurement unitsWang F.-C.; Chen S.-F.; CHIN-HSIEN LIN ; Shih C.-J.; Lin A.-C.; Yuan W.; Li Y.-C.; FU-CHENG WANG Sensors1815
3072021A TEG-based waste heat recovery system for atmospheric pressure plasma jets: Model prediction and experimental verificationMEI-JIAU HUANG ; Lin Y.-H; Hsu P.-C; JIA-YANG JUANG Applied Thermal Engineering54
3082021Stroke-gait detection by DNN models employing gait data from various sensor systemsShih C.-J.; Kuo T.-Y.; Li Y.-C.; Chen S.-F.; CHIN-HSIEN LIN ; FU-CHENG WANG Proceedings of 2021 International Conference on System Science and Engineering, ICSSE 202100
3092021Torque Ripple Reduction for BLDC Permanent Magnet Motor Drive using DC-link Voltage and Current ModulationHuang C.-L; SHIH-CHIN YANG 2021 IEEE International Future Energy Electronics Conference, IFEEC 202130
3102021Saliency-Based Sensorless Drive Using the Measurement Vector Insertion for PWM Voltage InjectionChen J.-Y; Huang C.-L; Hung K.-Y; SHIH-CHIN YANG 2021 IEEE International Future Energy Electronics Conference, IFEEC 202110
3112021Intelligent fault detection, diagnosis and health evaluation for industrial robotsHsu H.-K; Ting H.-Y; Huang M.-B; Huang H.-P.; HAN-PANG HUANG Mechanika1410
3122021Defect detection of grinded and polished workpieces using faster R-CNNLiu M.-W; Lin Y.-H; Lo Y.-C; Shih C.-H; Lin P.-C.; PEI-CHUN LIN IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM
3132021Development of a novel leg-wheel module with fast transformation and leaping capabilityChen H.-Y; Wang T.-H; Ho K.-C; Ko C.-Y; Lin P.-C; Lin P.-C.; PEI-CHUN LIN Mechanism and Machine Theory
3142021Development of an adaptive explicit algorithm for static simulation using the vector form intrinsic finite element methodWang M.-L; Chuang C.-C; Lee J.-J.; JYH-JONE LEE Journal of Mechanics
3152021Robot grasping in dense clutter via view-based experience transferWang J.-W; Li C.-L; Chen J.-L; Lee J.-J.; JYH-JONE LEE International Journal of Intelligent Robotics and Applications
3162021Egg incubation mechanics of giant birdsYen A; Wu H.-J; Chen P.-Y; HON-TSEN YU ; Juang J.-Y.; JIA-YANG JUANG Biology
3172021Integrating time-optimal motion profiles with position control for a high-speed permanent magnet linear synchronous motor planar motion stageHuang W.-L; Wang Y.-H; Kuo F.-C; Yen J.-Y; Kuo F.-C; Chou S.-C; Chung T.-T; Wang F.-C.; FU-CHENG WANG Precision Engineering41
3182021Iterative parameter optimization for multiple switching control applied to a precision stage for microfabricationWang F.-C; Lu J.-F; Chung T.-T; Yen J.-Y.; FU-CHENG WANG Machines00
3192021Importing the Human Factor into Safe Human-Robot Interaction Function Using the Bond Graph MethodCheng P.-J; Ting H.-Y; Huang H.-P.; HAN-PANG HUANG Robotica22
3202021Electrical impedance sensing system design for abnormal object detectionLin C.-Y; Chen H.-T; Cheng H.-F; He Y.-J.; CHUN-YEON LIN IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM00
3212021Optimization of distributed hybrid power systems employing multiple fuel-cell vehiclesLin K.-M; Wang F.-C.; FU-CHENG WANG International Journal of Hydrogen Energy87
3222021Chlorine dioxide gas generation using rotating packed bed for air disinfection in a hospitalHAN-PANG HUANG ; TA-CHIH HSIAO Journal of Cleaner Production94
3232021Continuum simulation of non-local effects in a granular silo discharge flow using a regularized μ (I) rheology modelLin C.-C; Yang F.-L.; FU-LING YANG Physics of Fluids66
3242021Transitions of bouncing and coalescence in binary droplet collisionsHuang K.-L; Pan K.-L.; KUO-LONG PAN Journal of Fluid Mechanics
3252021Development of an immersive SLAM-based VR system for teleoperation of a mobile manipulator in an unknown environmentKuo C.-Y; Huang C.-C; Tsai C.-H; Shi Y.-S; Smith S.; SHANA SMITH Computers in Industry
3262021Simple extended lattice Boltzmann methods for incompressible viscous single-phase and two-phase fluid flowsSuzuki K; Inamuro T; Nakamura A; Horai F; Pan K.-L; Yoshino M.; KUO-LONG PAN Physics of Fluids
3272021Continuous wave laser nanowelding process of ag nanowires on flexible polymer substratesXu L; Weng W.-C; Yeh Y.-C.; LI XU Nanomaterials
3282021An insight into optical metrology in manufacturingShimizu Y; Chen L.-C; Kim D.W; Chen X; Li X; Matsukuma H.; LIANG-CHIA CHEN Measurement Science and Technology
3292021Design of a monolithic constant-force compliant mechanism for extended range of motion and minimal force variationLo C.-W; Chang Y; Wang M.-L; Lin C.-R; Lee J.-J.; JYH-JONE LEE Proceedings of the ASME Design Engineering Technical Conference
3302021Dielectrophoretic crossover frequency of individual pearl chains formed by bonded colloidal spheresHung, C.-L.; Kao, Y.-C.; Juang, J.-Y.; JIA-YANG JUANG Sensors and Actuators, B: Chemical
3312021Sensorless Acceleration Estimation and Acceleration Feedback Control to Improve the Disturbance Torque Rejection on Galvano Motor SystemLin Y.-J; Chou P.-H; Wu C.-J; Yang S.-C.; SHIH-CHIN YANG 2021 IEEE Energy Conversion Congress and Exposition, ECCE 2021 - Proceedings
3322021Free-Breathing Volumetric Liver R2* and ProtonDensity Fat Fraction Quantification in Pediatric Patients Using Stack-of-Radial MRI With Self-Gating Motion CompensationZhong X.; Hu H.H.; Armstrong T.; Li X.; Lee Y.-H.; Tsao T.-C.; Nickel M.D.; Kannengiesser S.A.R.; Dale B.M.; Deshpande V.; Kiefer B.; Wu H.H.; YU-HSIU LEE Journal of Magnetic Resonance Imaging
3332021Semi-Automated Extraction of Lens Fragments Via a Surgical Robot Using Semantic Segmentation of OCT Images with Deep Learning-Experimental Results in Ex Vivo Animal ModelShin C; Gerber M; Lee Y.-H; Rodriguez M; Aghajani Pedram S; Hubschman J.-P; Tsao T.-C; Rosen J.; YU-HSIU LEE IEEE Robotics and Automation Letters
3342021High-speed chromatic confocal microscopy using multispectral sensors for sub-micrometer-precision microscopic surface profilometryChen L.-C; Tan P.-J; Wu G.-W; Lin C.-J; Nguyen D.T.; LIANG-CHIA CHEN Measurement: Sensors
3352021Optimization of computer numerical control interpolation parameters using a backpropagation neural network and genetic algorithm with consideration of corner vibrationsTseng H; Tsai M; Cheng C; Li C.; MENG-SHIUN TSAI Applied Sciences (Switzerland)
3362021A design and verification of a non-icing and non-condensing waste-cold-recovery systemLin M.-C; Chen H.-Y; Chung F.-T; Huang M.-J.; MEI-JIAU HUANG Applied Thermal Engineering
3372021Portable interactive pulse tactile recorder and player systemHsieh T.-C; Wu C.-M; Tsai C.-C; Lo W.-C; Wang Y.-M; Smith S.; SHANA SMITH Sensors22
3382021Usability study of multiple vibrotactile feedback stimuli in an entire virtual keyboard inputKung, C.-H.; Hsieh, T.-C.; Smith, S.; SHANA SMITH Applied Ergonomics33
3392021A simulation study on risks to wind turbine arrays from thunderstorm downbursts in different atmospheric stability conditionsLu N.-Y; Manuel L; Hawbecker P; Basu S.; NAN-YOU LU Energies
3402021A miniaturized polymer-based bimorph actuator with self-sensing capabilityTan H.S; Chen H.-Y; Chiu Y.-H; Youh R.-Y; Yang Y.J.-J.; YAO-JOE YANG AIP Advances
3412021Measurement of nonlinear poisson’s ratio of thermoplastic polyurethanes under cyclic softening using 2d digital image correlationXu Y.-X; Juang J.-Y.; JIA-YANG JUANG Polymers
3422021Grooved cam with a translating follower having an added ternary-roller intermediate linkHsu K.-L; Pan T.-H; Wu L.-I.; KUAN-LUN HSU Proceedings of the ASME Design Engineering Technical Conference
3432021Saliency-Based Permanent Magnet Machine Position Sensorless Drive Using Proposed PWM Injection and Shunt-Based Current Sensing for Position EstimationChen J.-Y; Yang S.-C.; SHIH-CHIN YANG IEEE Transactions on Industrial Electronics
3442021Integrating object detection and image segmentation for detecting the tool wear area on stitched imageLin W.-J; Chen J.-W; Jhuang J.-P; Tsai M.-S; Hung C.-L; Li K.-M.; KUAN-MING LI Scientific Reports107
3452021Unknown parameter excitation and estimation for complex systems with dynamic performancesChen Y.-P; Chan K.-Y.; KUEI-YUAN CHAN Journal of Mechanical Design, Transactions of the ASME
3462021Automated optical inspection system for o-ring based on photometric stereo and machine visionYang F.-S; Ho C.-C; Chen L.-C.; LIANG-CHIA CHEN Applied Sciences (Switzerland)
3472021High-performance complementary electrochromic device based on iridium oxide as a counter electrodeKo T.-F; Chen P.-W; Li K.-M; Young H.-T; Chang C.-T; Hsu S.-C.; KUAN-MING LI Materials
3482021A Wireless Cardiovascular Pressure Sensor Based on an Iontronic Film with High SensitivityCai M.-X; Yang Y.-J.; YAO-JOE YANG Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)
3492021Heat transfer analysis and thermal performance investigation on an evacuated tube solar collector with inner concentrating by reflective coatingChai S; Yao J; Liang J.-D; Chiang Y.-C; Zhao Y; Chen S.-L; Dai Y.; SIH-LI CHEN Solar Energy
3502021Elastic moduli of avian eggshellChiang P.-L; Tseng Y.-C; Wu H.-J; Tsao S.-H; Wu S.-P; Wang W.-C; Hsieh H.-I; Juang J.-Y.; JIA-YANG JUANG Biology
3512021Analysis and experimental evaluation of mechanical errors in nine-link type double-toggle mold/die clamping mechanismsChang W.-T; Lee W.-I; Hsu K.-L.; KUAN-LUN HSU Applied Sciences (Switzerland)
3522021Publisher Correction: Integrating object detection and image segmentation for detecting the tool wear area on stitched image (Scientific Reports, (2021), 11, 1, (19938), 10.1038/s41598-021-97610-y)Lin W.-J; Chen J.-W; Jhuang J.-P; Tsai M.-S; Hung C.-L; Li K.-M; Young H.-T.; KUAN-MING LI Scientific Reports11
3532021Guided buckling of elastoplastic spherical shells induced by indenters of various shapesTseng Y.-C; Amon P; Dolbachian L.M; Juang J.-Y.; JIA-YANG JUANG Extreme Mechanics Letters
3542021Towards an Omni-directional Orientation Manipulation of Spherical Piezoelectric Motor: A Torque Vector Composition MethodHwang T.-C; Sung Y.-T; Huang Y.-H; Lin C.-Y.; YU-HSI HUANG International Conference on Control, Automation and Systems
3552021Developing the smart sorting screw system based on deep learning approachesLin W.-J; Chen J.-W; Young H.-T; Hung C.-L; Li K.-M.; KUAN-MING LI Applied Sciences (Switzerland)
3562021Hardware-in-the-loop simulation of self-driving electric vehicles by dynamic path planning and model predictive controlChung Y; Yang Y.-P.; YEE-PIEN YANG Electronics (Switzerland)
3572021Transient Hall Sensor Fault Compensation for Hall-Based Field Oriented Control Motor DriveLin H.-C; Chen J.-Y; Chen G.-R; Yang S.-C.; SHIH-CHIN YANG 2021 IEEE Energy Conversion Congress and Exposition, ECCE 2021 - Proceedings
3582021A wireless passive pressure sensor using microstructured ferromagnetic films with tunable effective permeabilityLin Y.-C; Cai M.-X; Yang Y.-J.; YAO-JOE YANG Journal of Micromechanics and Microengineering
3592021Evaporation heat transfer enhancement by a laser-textured heterogeneous surfaceHsu C.-C; Cheng H.-C; Chang T.-L; Chen P.-H.; PING-HEI CHEN Colloids and Surfaces A: Physicochemical and Engineering Aspects
3602021Boiling heat transfer enhancement over copper tube via electrolytic and electrostatic effectsCheng H.-C; Lin H.-C; Chen P.-H.; PING-HEI CHEN Applied Thermal Engineering
3612021An Experimental Investigation on Thermal Performance of Ultra-Thin Heat Pipes with Superhydrophilic Copper BraidsCheng H.-C; Chen T.-H; Huang H.-S; Chen P.-H.; PING-HEI CHEN Heat Transfer Engineering
3622021Special issue: the third Cross-Strait Workshop on Fluid Mechanics (CSWFM 2020)Chen P.-H; Chern M.-J.; PING-HEI CHEN Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A
3632021Do extraordinary science and technology scientists balance their publishing and patenting activities?Chang Y.-W ; Chen D.-Z; Huang M.-H. ; DAR-ZEN CHEN PLoS ONE11
3642021Disturbance Rejection of the Galvano Scanner System using Sensorless Acceleration Control and Disturbance Torque CompensationLin Y.-J; Chou P.-H; Wu C.-J; SHIH-CHIN YANG 2021 IEEE International Future Energy Electronics Conference, IFEEC 202100
3652021Decoupled multi-loop robust control for a walk-assistance robot employing a two-wheeled inverted pendulumWang F.-C; Chen Y.-H; Wang Z.-J; Liu C.-H; Lin P.-C; FU-CHENG WANG ; PEI-CHUN LIN Machines11
3662021Enhanced flow rate by the concentration mechanism of Tetris particles when discharged from a hopper with an obstacleGao G.-J.J; Yang F.-L; Holcomb M.C; Blawzdziewicz J.; FU-LING YANG Physical Review E11
3672021Multi-Bevel Needle Design Enabling Accurate Insertion in Biopsy for Cancer DiagnosisLi A.D.R; Liu Y; Plott J; Chen L; Montgomery J.S; Shih A.; DIAN-RU LI IEEE Transactions on Biomedical Engineering63
3682021Fabrication and compressive behavior of a micro?lattice composite by high resolution dlp stereolithographyShin C.S; Chang Y.C.; CHOW-SHING SHIN Polymers
3692021Hybrid graphene-based photonic-plasmonic biochemical sensor with a photonic and acoustic cavity structureCHIEN-HAO LIU Crystals
3702021Shape memory properties and microstructure of new iron-based fenicoaltinb shape memory alloysTseng L.-W; Chen C.-H; Chen W.-C; Cheng Y; Lu N.-H.; CHIH-HSUAN CHEN Crystals
3712021Effects of different electrodes used in bone-guided extracochlear implants on electrical stimulation of auditory nerves in guinea pigsLiu C.-H; Lu Y.-S; Chen P.-C; Lee C.-F.; CHIEN-HAO LIU Tzu Chi Medical Journal
3722021Analytic solution to the coupled vibration characteristics of a rectangular plate partially immersed in a finite fluid containerChen G.-W; Liao C.-Y; Lin Y.-Z; CHIEN-CHING MA Journal of Sound and Vibration
3732021Alloying-assisted precipitation strengthening of Ti50Ni15Pd25Cu10 shape memory alloyShen Y.-N; Chang Y.-T; CHIH-HSUAN CHEN Materials Science and Engineering A
3742021Adhesive joint integrity monitoring using the full spectral response of fiber bragg grating sensorsShin C.-S; Lin T.-C.; CHOW-SHING SHIN Polymers
3752021Investigation of resonant and energy harvesting characteristics of piezoelectric fiber composite bimorphsLin, Y.-C.; Tseng, K.-S.; CHIEN-CHING MA Materials and Design
3762021Performance analysis of building-integrated earth-air heat exchanger retrofitted with a supplementary water system for cooling-dominated climate in TaiwanYang L.-H; Hu J.-W; Chiang Y.-C; Chen S.-L.; SIH-LI CHEN Energy and Buildings
3772021Efficient excitation of transverse vibrational modes using improved configurations of PFCs connected to an isotropic plateChuang K.-C; Lin S.-H; CHIEN-CHING MA Composite Structures
3782021Inhomogeneous martensitic transformation behavior and elastocaloric effect in a bicrystal Cu-Al-Mn shape memory alloyLu, N.-H.; CHIH-HSUAN CHEN Materials Science and Engineering A
3792021In-situ strain measurement of shape memory alloy fiber during the austenitic and martensitic phase transformationMa C.-C; Chang C.-Y; Chang C.-Y.; CHIEN-CHING MA Smart Materials and Structures
3802021Theoretical analyses and numerical simulation of flexural vibration based on Reddy and modified higher-order plate theories for a transversely isotropic circular plateJi M; Wu Y.-C; CHIEN-CHING MA Acta Mechanica
3812021Theoretical analysis of transverse and planar vibrations for the piezoceramic disk based on Mindlin plate theoryHuang C.-H; Li C.-C; Wu Y.-C; CHIEN-CHING MA Applied Mathematical Modelling
3822021Sensorless lc filter implementation for permanent magnet machine drive using observer-based voltage and current estimationLiang C.-M; Lin Y.-J; Chen J.-Y; Chen G.-R; Yang S.-C.; SHIH-CHIN YANG Sensors3
3832021Electrically tunable plasmonic biosensors based on cavity-coupled structure with grapheneCHIEN-HAO LIU IEEE Journal of Selected Topics in Quantum Electronics
3842021Theoretical analysis of vibration characteristics of rectangular thin plate fully immersed in fluid with finite dimensionLiao, C.-Y.; Chen, G.-W.; Hsu, H.-W.; CHIEN-CHING MA International Journal of Mechanical Sciences
3852021Design and Optimization of a Joint Torque Sensor for Lightweight RobotsNguyen D.-D; Kuo C.-H.; CHUNG-HSIEN KUO IEEE Sensors Journal
3862021Novel blood clot retriever for ischemic strokeHung M.-Y; Yang C.-K; Chen J.-H; Lin L.-H; Hsiao H.-M.; HAO-MING HSIAO Micromachines
3872021Development of a force measurement system with a large punctual measurement rangeMai S.-H; Chen C.-W; Lin P.-T; Kao F.-S; Liao H.-S.; HSIEN-SHUN LIAO Measurement Science and Technology
3882021An experimental study of non-spinning stone-skipping processTsai H.-W; Wu W.-F; Lai C.-L.; WEN-FANG WU Experimental Thermal and Fluid Science
3892021Laser r-test for angular positioning calibration and compensation of the five-axis machine toolsTran C.-S; Hsieh T.-H; Jywe W.-Y.; Wen-Yuh Jywe Applied Sciences (Switzerland)
3902021Development of a non-linear bi-directional vortex-induced piezoelectric energy harvester with magnetic interactionSu W.-J; Wang Z.-S.; WEI-JIUN SU Sensors11
3912021Analytical solutions for in-plane dominated vibrations of transversely isotropic circular plates based on high-order theoriesJi M; Wu Y.-C; CHIEN-CHING MA Journal of Sound and Vibration
3922021Development of Navigation System for Path Planning of Autonomous Cleaning RobotTran M.-Q; Simbolon I.M; Kuo C.-H.; CHUNG-HSIEN KUO 2021 International Automatic Control Conference, CACS 2021
3932021Physics-Driven Mask R-CNN for Physical Needle Localization in MRI-Guided Percutaneous InterventionsLi X; Lee Y.-H; Lu D.S; Tsao T.-C; Wu H.H.; YU-HSIU LEE IEEE Access
3942021A Feasible Model Training for LSTM-Based Dual Foot-Mounted Pedestrian INSWu C.-J; Kuo C.-H; Lin Y.-H; Liu W.-Y.; CHUNG-HSIEN KUO IEEE Sensors Journal
3952021A target-fixed immersed-boundary formulation for rigid bodies interacting with fluid flowLin T.-Y; Hsieh H.-Y; Tsai H.-C.; HSIEH-CHEN TSAI Journal of Computational Physics
3962021Image Recognition based on Dynamic Highway Networks [基於動態高速公路類神經網路之圖像識別研究]Wang S.-H; Lin W.-Z; Huang H.-P.; HAN-PANG HUANG Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao
3972021Integrating vehicle positioning and path tracking practices for an autonomous vehicle prototype in campus environmentYang J.-A; Kuo C.-H.; CHUNG-HSIEN KUO Electronics (Switzerland)
3982021PCA-ANN Contactless Multimodality Sensors for Body Temperature EstimationRinanto N; Kuo C.-H.; CHUNG-HSIEN KUO IEEE Transactions on Instrumentation and Measurement
3992021Design and evaluation of a 3D multi-manifold micromixer realized by a double-Archimedes-screw for rapid mixing within a short distanceShin C.-S; Baldeck P.L; Nie Y.-M; Lee Y.-H; Lin Z.-D; Chiang C.-C; Lin C.-L.; CHOW-SHING SHIN Journal of the Taiwan Institute of Chemical Engineers
4002021A Smart Sterilization Robot System with Chlorine Dioxide for Spray DisinfectionZhao Y.-L; Huang H.-P; Chen T.-L; Chiang P.-C; Chen Y.-H; Yeh J.-H; Huang C.-H; Lin J.-F; Weng W.-T.; HAN-PANG HUANG IEEE Sensors Journal
4012021Synthesis and catalytical properties of hierarchical nanoporous copper from θ and η phases in CuAl alloysSu Y.-R; Wu T.-H; Cheng I.-C.; I-Chung Cheng Journal of Physics and Chemistry of Solids
4022021Heterogeneous structure-induced strength-ductility synergy by partial recrystallization during friction stir welding of a high-entropy alloyLin, P.-T.; Liu, H.-C.; Hsieh, P.-Y.; Wei, C.-Y.; Tsai, C.-W.; Sato, Y.S.; Chen, S.-C.; Yen, H.-W.; Lu, N.-H.; Chen, C.-H.; CHIH-HSUAN CHEN ; HUNG-WEI YEN Materials and Design
4032021The mechanical and catalytic behavior of nanoporous copper film on octet-truss lattice via magnetron sputteringTsai W.-H; Tang C.-H; Cheng I.-C.; I-Chung Cheng Thin Solid Films
4042021Effect of Atmospheric-Pressure Helium Plasma-Jet Treatment on Electrocatalysis of CO2Reduction Reaction using Nanoporous Copper FilmsZeng W.-Y; Tsai J.-H; Cheng I.-C.; I-Chung Cheng Journal of the Electrochemical Society
4052021Development of a Resonant Scanner to Improve the Imaging Rate of Astigmatic Optical ProfilometersLiao H.-S; Cheng S.-H; Hwu E.-T.; HSIEN-SHUN LIAO IEEE/ASME Transactions on Mechatronics
4062021Stability during Stairmill Ascent with Upward and Downward Applied Forces on the PelvisChang B.-C.; Agrawal S.K.; BIING-CHWEN CHANG IEEE Transactions on Neural Systems and Rehabilitation Engineering1
4072021SpringExo, a spring-based exoskeleton for providing knee assistance: Design, Characterization and Feasibility StudySui D.; Chang B.-C.; Hidayah R.; Zhu Y.; Agrawal S.K.; BIING-CHWEN CHANG Proceedings - IEEE International Conference on Robotics and Automation
4082021Energy efficiency analysis of mass transport enhancement in time-periodic oscillatory electroosmosisHuang H.-F; Huang K.-H.; HSIN-FU HUANG Physics of Fluids
4092021Hacking blu-ray drives for high-throughput 3D printingHu E.E.-T; Voss M; Chang T.-J; Liao H.-S; Boisen A.; HSIEN-SHUN LIAO Proceedings of SPIE - The International Society for Optical Engineering
4102021Effect of Dealloying Time and Post-Annealing on the Surface Morphology and Electrocatalytic Behavior of Nanoporous Copper Films for CO2Reduction ReactionZeng W.-Y; Lai J.-H; Cheng I.-C.; I-Chung Cheng Journal of the Electrochemical Society
4112021Flexible High-Resolution Force and Dimpling Measurement System for Pia and Dura Penetration during in Vivo Microelectrode Insertion into Rat BrainChen L; Hartner J; Dong T; Li A; Watson B; Shih A.; DIAN-RU LI IEEE Transactions on Biomedical Engineering20
4122020Editorial special issue “Advances in Visual Ergonomics“Menozzi, Marino; Long, Jennifer; YING-YIN HUANG ; Richter, Hans O.International Journal of Industrial Ergonomics00
4132020Hydrodynamic Snaring Array for Trapping and Perfusion Culture of Single CellYA-YU CHIANG ; Teng, Yi Chiuan; Su, Zhe Yi; Hsueh, Han Yu; Tu, Kai HungSensors and Actuators, B: Chemical33
4142020Development of Ophthalmic Microsurgery Training in Augmented RealityMenozzi, Marino; Ropelat, Sandro; Köfler, Jana; YING-YIN HUANG Klinische Monatsblatter fur Augenheilkunde98
4152020Leidenfrost suppression and contact time reduction of a drop impacting on silicon nanowire array-coated surfacesSahoo, Venkataraman; Lo, Ching Wen; MING-CHANG LU International Journal of Heat and Mass Transfer1615
4162020The influence of shear stress generated by osmotic driven flow on the alignment of endotheliial cellSie, Zong Han; Wu, Lu Wei; Chang, Yen Yu; Toh, Yi Chin; YA-YU CHIANG MicroTAS 2020 - 24th International Conference on Miniaturized Systems for Chemistry and Life Sciences0
4172020Fluorescence sectioning micro-endoscopy using hybrid illuminationHsiao, Haw; Lin, Chen Yen; KUANG-YUH HUANG; KUANG-YUH HUANG Proceedings of SPIE - The International Society for Optical Engineering00
4182020A sudden variation in the visual field reduces driver’s accuracy in estimation of the speed of the car aheadYING-YIN HUANG Ergonomics21
4192020Evolution of Guinier-Preston zones in cold-rolled Al<inf>0.2</inf>CoCrFeNi high-entropy alloy studied by synchrotron small-angle X-ray scatteringHuang, Y.-C.; Tsao, C.-S.; Lin, C.; Lai, Y.-C.; Wu, S.-K.; CHIH-HSUAN CHEN ; SHYI-KAAN WU Materials Science and Engineering A55
4202020Hydrostatic Actuation for Remote Operations in MR EnvironmentSimonelli J.; Lee Y.-H.; Chen C.-W.; Li X.; Mikaiel S.; Lu D.; Wu H.H.; YU-HSIU LEE IEEE/ASME Transactions on Mechatronics78
4212020Mosquito proboscis-inspired needle insertion to reduce tissue deformation and organ displacementLi A.D.R; Putra K.B; Chen L; Montgomery J.S; Shih A.; DIAN-RU LI Scientific Reports2212
4222020Developing A Rheological Relation for Transient Dense Granular Flows Via Discrete Element Simulation in A Rotating DrumLin, C.-C.; Jiang, M.-Z.; FU-LING YANG ; MING-ZHE JIANG Journal of Mechanics22
4232020Development of an automated assistive trainer inspired by neuro-developmental treatmentWang, F.-C.; Lin, Y.-Y.; Li, Y.-C.; Chen, P.-Y.; Yu, C.-H.; FU-CHENG WANG Sensors and Materials55
4242020Continuum simulation for regularized non-local μ(I) model of dense granular flowsLin, C.-C.; Yang, F.-L.; FU-LING YANG Journal of Computational Physics1815
4252020Patterns of innovation team of pharmaceutical in countriesCHUN-CHIEH WANG ; DAR-ZEN CHEN ; MU-HSUAN HUANG 18th International Conference on Scientometrics and Informetrics, ISSI 20210
4262020Impact-driven broadband piezoelectric energy harvesting using a two-degrees-of-freedom structureSu, W.-J.; WEI-JIUN SU Microsystem Technologies10
4272020Saliency-Based Position Sensorless Drive for Permanent Magnet Machine with Low Cost Shunt Resistor Current Sensing using Modified PWM Voltage InjectionChen J.-Y; Hung K.-Y; Chen G.-R; Yang S.-C.; SHIH-CHIN YANG ECCE 2020 - IEEE Energy Conversion Congress and Exposition
4282020Full-Region Sensorless BLDC Drive for Permanent Magnet Motor using Pulse Amplitude Modulation with DC Current SensingHuang C; Wu C; Yang S.; SHIH-CHIN YANG IEEE Transactions on Industrial Electronics
4292020A Magnetic-Polymer-Based Passive Pressure Sensor Realized with a Foldable Parylene SubstrateLin, Y.-C.; Yang, Y.-J.; YAO-JOE YANG Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)
4302020Development of an Innovative 2-DOF Continuous–Rotatable MechanismLiu, C.; Wang, T.-H.; Lin, P.-C.; PEI-CHUN LIN Mechanisms and Machine Science
4312020Novel servo-feed-drive model considering cutting force and structural effects in milling to predict servo dynamic behaviorsLi C.-J; Tseng H.-C; Tsai M.-S; Cheng C.-C.; MENG-SHIUN TSAI International Journal of Advanced Manufacturing Technology
4322020Effect of biomimetic fishbone-patterned copper tubes on pool boiling heat transferCheng H.-C; Chen Y.-Y; Chang T.-L; Chen P.-H.; PING-HEI CHEN International Journal of Heat and Mass Transfer
4332020Correction to: Novel servo-feed-drive model considering cutting force and structural effects in milling to predict servo dynamic behaviors (The International Journal of Advanced Manufacturing Technology, (2020), 106, 3-4, (1441-1451), 10.1007/s00170-019-04778-9)Li C.-J; Tseng H.-C; Tsai M.-S; Cheng C.-C.; MENG-SHIUN TSAI International Journal of Advanced Manufacturing Technology
4342020Roughness and wettability properties of plain and silica-coated copper surfaces textured with picosecond laserCheng H.-C; Jiang Z.-X; Chang T.-L; Chen P.-H.; PING-HEI CHEN Applied Surface Science
4352020Development of a novel tuning approach of the notch filter of the Servo feed drive systemLiu C.-C; Tsai M.-S; Hong M.-Q; Tang P.-Y.; MENG-SHIUN TSAI Journal of Manufacturing and Materials Processing
4362020Experimental investigation of inner bubble dynamics during water droplet evaporation from heated surfaces with different roughness and wettability levelsCheng H.-C; Chang T.-L; Chen P.-H.; PING-HEI CHEN International Journal of Heat and Mass Transfer
4372020Study on the transient response to the point-to-point motion controls on a dual-axes air-bearing planar stageKuo, F.-C.; Hsu, C.; Hsieh, M.-R.; Yen, J.-Y.; Chen, L.-C.; Chung, T.-T.; JIA-YUSH YEN ; FU-CHENG WANG ; LIANG-CHIA CHEN International Journal of Advanced Manufacturing Technology32
4382020Improved design and in vivo animal tests of bone-guided cochlear implant microsystem with monopolar biphasic multiple stimulation and neural action potential acquisitionWang S.-H; Huang Y.-K; Chen C.-Y; Lee C.-F; Yang C.-H; Hung C.-C; Liu C.-H; Ker M.-D; CHIEN-HAO LIU ; CHIA-HSIANG YANG 2020 IEEE Asian Solid-State Circuits Conference, A-SSCC 202030
4392020Fuel-cell sharing for a distributed hybrid power systemWang, F.-C.; Lin, K.-M.; Yang, Y.-Z.; Liu, H.-W.; FU-CHENG WANG International Journal of Hydrogen Energy119
4402020Microstructure and Mechanical Properties of (TiZrHf) 50 (NiCoCu) 50 High Entropy AlloysChen, C.-H. ; Chen, Y.-J.; Shen J.-J.Metals and Materials International2120
4412020Online gait detection with an automatic mobile trainer inspired by neuro-developmental treatmentLi, Y.-C.; Wu, K.-L.; Chen, P.-Y.; FU-CHENG WANG Sensors (Switzerland)1210
4422020Erratum: Cracking failure of curved hollow tree trunks (Royal Society Open Science (2020) 7 (200203) DOI: 10.1098/rsos.200203)Huang Y.-S; Chiang P.-L; Kao Y.-C; Hsu F.-L; Juang J.-Y.; JIA-YANG JUANG Royal Society Open Science
4432020Kinematic error analysis of the rotor vector gear reducer with machining tolerancesWu, K.-Y.; Shih, Y.-P.; Lee, J.-J.; JYH-JONE LEE Journal of the Brazilian Society of Mechanical Sciences and Engineering9
4442020Bio-magnetic/eddy-current sensor design for biological object detectionLin, C.-Y.; Wu, Y.-C.; Chen, Y.-L.; Huang, S.-C.; CHUN-YEON LIN IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM00
4452020Detecting removed attributes in the cyber system for smart manufacturingYen, C.-T.; Tsung, C.-K.; WEN-FANG WU Journal of Supercomputing21
4462020Telecentric design for digital-scanning-based HiLo optical sectioning endomicroscopy with an electrically tunable lensHsiao H.; Lin C.-Y.; Vyas S.; KUANG-YUH HUANG ; Yeh J.A.; YUAN LUO Journal of Biophotonics22
4472020Comprehensive Design of Prosthetic Hand with Practical and Reliable ControlChen T.-Y; Huang M.-B; Huang H.-P.; HAN-PANG HUANG 2nd IEEE Eurasia Conference on IOT, Communication and Engineering 2020, ECICE 202000
4482020Needle deflection and tissue sampling length in needle biopsyLi A.D.R; Plott J; Chen L; Montgomery J.S; Shih A.; DIAN-RU LI Journal of the Mechanical Behavior of Biomedical Materials2018
4492020Factors of university–industry collaboration affecting university innovation performanceTseng, F.-C.; MU-HSUAN HUANG ; DAR-ZEN CHEN Journal of Technology Transfer8469
4502020Novel multi-square-pulse compensation algorithm for reducing quadrant protrusion by injecting signal with optimal waveformLiu, CC; Tsai, MS; Lin, MT; Tang, PY; MENG-SHIUN TSAI MECHANISM AND MACHINE THEORY55
4512020Development of iot technologies for air pollution prevention and improvementZhao Y.-L; Tang J; Huang H.-P; Wang Z; Chen T.-L; Chiang C.-W; Chiang P.-C.; HAN-PANG HUANG Aerosol and Air Quality Research1510
4522020An augmented reality-based training system with a natural user interface for manual milling operationsYang, C.-K.; Chen, Y.-H.; Chuang, T.-J.; Shankhwar, K.; Smith, S.; SHANA SMITH Virtual Reality
4532020Single-Actuator-Based Lower-Limb Soft Exoskeleton for Preswing Gait AssistanceHsieh, Ming-Hwa; Huang, Yin Hsuan; Chao, Chia-Lun; Liu, Chien-Hao; WEI-LI HSU ; CHIEN-HAO LIU Applied bionics and biomechanics117
4542020Model Reference Adaptive Control of Pulse Amplitude Modulated PM Motor Drive for High Power Transport Drone ApplicationsHuang C.-L; Wu C.-J; Yang S.-C.; SHIH-CHIN YANG ECCE 2020 - IEEE Energy Conversion Congress and Exposition
4552020Dielectrophoretic crossover frequency of single particles: Quantifying the effect of surface functional groups and electrohydrodynamic flow drag forceLu, Y.-W.; Sun, C.; Kao, Y.-C.; Hung, C.-L.; Juang, J.-Y.; JIA-YANG JUANG Nanomaterials65
4562020Response prediction and dynamic substructuring for coupled structures in the frequency domainLiao X.H; Wu W.F; Meng H.D; Zhao J.B.; WEN-FANG WU Journal of Mechanics
4572020Theoretical and numerical investigations on resonant characteristics of two piezoelectric plates coupled with a finite fluid fieldHuang Y.-H; Lin Y.-C; Liao C.-Y; Jhuang K.-L.; YU-HSI HUANG Archive of Applied Mechanics
4582020Two-stage multi-modal system for low frequency and wide bandwidth vibration energy harvestingOng, Z.C.; Ooi, Y.X.; Khoo, S.Y.; Huang, Y.H.; YU-HSI HUANG Measurement: Journal of the International Measurement Confederation
4592020Dynamic non-destructive evaluation of piezoelectric materials to verify on accuracy of transversely isotropic material property measured by resonance methodHuang Y.-H; Yen C.-Y; Huang T.-R.; YU-HSI HUANG Applied Sciences (Switzerland)
4602020Respiratory motion prediction using fusion-based multi-rate kalman filtering and real-time golden-angle radial mriLi X.; Lee Y.-H.; Mikaiel S.; Simonelli J.; Tsao T.-C.; Wu H.H.; YU-HSIU LEE IEEE Transactions on Biomedical Engineering
4612020Heat Transfer of Semicrystalline Nylon NanofibersChien, H.-C.; Peng, W.-T.; Chiu, T.-H.; Wu, P.-H.; Liu, Y.-J.; Tu, C.-W.; Wang, C.-L. ; Lu, M.-C.; MING-CHANG LU ACS Nano1513
4622020Q-PointNet: Intelligent stacked-objects grasping using a RGBD sensor and a dexterous handWang C.-H; Lin P.-C.; PEI-CHUN LIN IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM
4632020PrefaceKuo C.-H; Lin P.-C; Essomba T; Chen G.-C.; PEI-CHUN LIN Mechanisms and Machine Science
4642020Thermal performance analysis of a package using non-simulation techniqueChien, H.-C.; Huang, M.-J.; Chen, Z.-Z.; MEI-JIAU HUANG 2020 International Symposium on VLSI Technology, Systems and Applications, VLSI-TSA 2020
4652020A normal force estimation model for a robotic belt-grinding systemWang Y.-H; Lo Y.-C; Lin P.-C.; PEI-CHUN LIN IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM
4662020Sensorless Vibration Harmonic Estimation of Servo System Based on the Disturbance Torque ObserverHuang C.-L; Yang S.-C.; SHIH-CHIN YANG IEEE Transactions on Industrial Electronics
4672020Permanent magnet motor design for satellite attitude control with high torque density and low torque rippleChou P.-H; Yang S.-C; Jhong C.-J; Huang J.-I; Chen J.-Y.; SHIH-CHIN YANG IEEE Access
4682020Mechanical feedback analysis of a ferrofluid-based module with 2D dynamic traveling waves for tactile display applicationKuo, C.-H.; Smith, S.; SHANA SMITH Displays
4692020A novel single-actuator bistable microdevice with a moment-driven mechanismHuang, S.-W.; Lin, F.-C.; Yang, Y.-J.; YAO-JOE YANG Sensors and Actuators, A: Physical9
4702020An RF-Powered Wireless Micro-Heater Integrated with Acrylate-Composite-Based Temperature Regulator for Hyperthermia TreatmentYeh, C.-C.; Yang, Y.-J.; YAO-JOE YANG Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)
4712020MRI-guided targeted needle placement during motion using hydrostatic actuatorsMikaiel S.; Simonelli J.; Li X.; Lee Y.-H.; Lee Y.S.; Sung K.; Lu D.S.; Tsao T.-C.; Wu H.H.; YU-HSIU LEE International Journal of Medical Robotics and Computer Assisted Surgery
4722020A miniaturized wireless micro-heating strip integrated with an acrylate-composite temperature regulator for restenosis preventionHuang, S.-W.; Yeh, C.-C.; Yang, Y.-J.; YAO-JOE YANG Sensors and Actuators, A: Physical
4732020Cracking failure of curved hollow tree trunksHuang, Y.-S.; Chiang, P.-L.; Kao, Y.-C.; Hsu, F.-L.; Juang, J.-Y.; JIA-YANG JUANG Royal Society Open Science56
4742020Disk Cam Mechanisms with a Translating Follower Having Double Oblique Flat FacesHsu, K.-L.; Chen, Y.-N.; KUAN-LUN HSU Mechanisms and Machine Science
4752020Solar home system with peak-shaving function and smart control in hot water supplyHuang B.-J; KANG LI Smart Innovation, Systems and Technologies
4762020Experimental investigation of a liquid desiccant dehumidification system integrated with shallow geothermal energyLiang J.-D; Huang B.-H; Chiang Y.-C; Chen S.-L.; SIH-LI CHEN Energy
4772020The design of disk cam mechanisms with a translating follower having an added dual-roller intermediate linkHsu, K.-L.; Chou, S.-L.; KUAN-LUN HSU Proceedings of the ASME Design Engineering Technical Conference
4782020Soft hopping and crawling robot for in-pipe travelingYeh, C.-Y.; Chen, C.-Y.; Juang, J.-Y.; JIA-YANG JUANG Extreme Mechanics Letters18
4792020Designing excitation maneuvers with maximal parameter sensitivity for an x-by-wire autonomous tricycleChen, Y.-P.; Chan, K.-Y.; KUEI-YUAN CHAN Proceedings of the ASME Design Engineering Technical Conference
4802020Wireless, smartphone controlled potentiostat integrated with lab-on-disc platformCheng, C.-H.; Zor, K.; Wang, J.-H.; Sanger, K.; Wang, W.-M.; Capria, A.M.; Boisen, A.; Huang, K.-Y.; Hwu, E.-T.; KUANG-YUH HUANG 21st International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2017
4812020Grey-taguchi-based optimization of wire-sawing for a slicing ceramicTsai Y.-Y; Ho J.-K; Wang W.-H; Hsieh C.-C; Tsao C.-C; Hsu C.-Y.; YAO-YANG TSAI Processes
4822020Automatic needle tracking using Mask R-CNN for MRI-guided percutaneous interventionsLi X.; Young A.S.; Raman S.S.; Lu D.S.; Lee Y.-H.; Tsao T.-C.; Wu H.H.; YU-HSIU LEE International Journal of Computer Assisted Radiology and Surgery
4832020Torque and battery distribution strategy for saving energy of an electric vehicle with three traction motorsTseng, Y.-H.; Yang, Y.-P.; YEE-PIEN YANG Applied Sciences (Switzerland)2
4842020A robotic system for telementoring and training in laparoscopic surgeryPrince S.W.; Kang C.; Simonelli J.; Lee Y.-H.; Gerber M.J.; Lim C.; Chu K.; Dutson E.P.; Tsao T.-C.; YU-HSIU LEE International Journal of Medical Robotics and Computer Assisted Surgery
4852020Computational investigation of an ethylene-fueled supersonic combustor assisted by a porous cylindrical burnerLee W.-S; Pan K.-L.; KUO-LONG PAN Aerospace Science and Technology
4862020Using high-dimensional features for high-accuracy pulse diagnosisHuang, C.-H.; Wang, Y.-M.; Smith, S.; SHANA SMITH Mathematical Biosciences and Engineering4
4872020A Novel Bistable Device Driven by Single Actuator via Moment InputHuang, S.-W.; Lin, F.-C.; Yang, Y.-J.; YAO-JOE YANG Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)
4882020Phase voltage measurement for permanent magnet machine sensorless drive using controller capture modulatorChen, G.-R.; Yang, S.-C.; SHIH-CHIN YANG IEEE Transactions on Industrial Electronics
4892020Development of a running hexapod robot with differentiated front and hind leg morphology and functionalityChiu J.-R; Huang Y.-C; Chen H.-C; Tseng K.-Y; Lin P.-C.; PEI-CHUN LIN IEEE International Conference on Intelligent Robots and Systems
4902020Solution strengthening the Ti-6Al-4V joints were brazed by Ti-15Cu-15Ni and Ag-26.7Cu-4.5Ti filler foilsLee, K.-H.; Yang, S.-Y.; SEN-YEU YANG Materials Science Forum
4912020Surface roughness variation effects on copper tubes in pool boiling of waterMata Arenales M.R; C.S. S.K; Kuo L.-S; Chen P.-H.; PING-HEI CHEN International Journal of Heat and Mass Transfer
4922020Development of a novel low-temperature differential hollow roller using an ultra-thin heating element of graphene polymeric composite materialKe, K.-C.; Lin, L.-J.; Yang, S.-Y.; SEN-YEU YANG Microsystem Technologies1
4932020The Demonstration of 3-D Bi 2.0 Te 2.7 Se 0.3 /Bi 0.4 Te 3.0 Sb 1.6 Thermoelectric Devices by Ionized Sputter SystemLiao, M.-H.; Huang, K.-C.; Su, W.-J.; Chen, S.-C.; Lee, M.-H.; MING-HAN LIAO ; WEI-JIUN SU IEEE Transactions on Electron Devices1
4942020The overlooked citations: Investigating the impact of ignoring citations to published patent applicationsKuan, C.-H.; Chen, D.-Z.; MU-HSUAN HUANG ; DAR-ZEN CHEN Journal of Informetrics10
4952020Energy Balance-Related Behaviors and Body Mass Index in Asian School-Aged Children With Congenital Heart DiseaseYang, Fu-Ling; BIH-SHYA GAU ; HSIAO-LING YANG ; MING-TAI LIN ; FU-LING YANG The Journal of cardiovascular nursing23
4962020Hot embossing of microstructure with moving induction heating and gas-assisted pressuringKao, C.-C.; Ke, K.-C.; Hung, W.-C.; SEN-YEU YANG Microsystem Technologies55
4972020Discovering types of research performance of scientists with significant contributionsYU-WEI CHANG ; DAR-ZEN CHEN ; MU-HSUAN HUANG Scientometrics66
4982020Slicing ceramics on material removed by a single abrasive particleTsai, Y.-Y.; Wu, M.-C.; Liao, Y.-S.; Tsao, C.-C.; Hsu, C.-Y.; YUNN-SHIUAN LIAO ; YAO-YANG TSAI Materials1
4992020Humidification-Dehumidification (HDH) desalination system with air-cooling condenser and cellulose evaporative padXu, L.; Chen, Y.-P.; Wu, P.-H.; BIN-JUINE HUANG ; LI XU Water (Switzerland)1713
5002020Self-Supported Nasopharyngeal Airway Device for Treatment of Hypotonic Upper Airway ObstructionNourmohammadi Z; Li A.D.R; Plott J.S; Powell A.R; Shih A; Zopf D.A.; DIAN-RU LI Procedia CIRP00
5012020Full-field stress and strain measurements revealing energy dissipation characteristics in martensitic band of Cu-Al-Mn shape memory alloySu, T.-H.; Lu, N.-H.; Chen, C.-H.; Chen, C.-S.; CHIH-HSUAN CHEN ; CHUIN-SHAN CHEN Materials Today Communications8
5022020Improved functional stability of Ti-rich TiNi shape memory ribbon prepared by melt-spinningChen, C.-H.; Lu, N.-H.; CHIH-HSUAN CHEN Journal of Alloys and Compounds8
5032020Transient behavior of a cantilever plate subjected to impact loading: Theoretical analysis and experimental measurementLiao, C.-Y.; CHIEN-CHING MA International Journal of Mechanical Sciences
5042020Theoretical analysis and experimental measurement of coupling dynamic characteristics for transversely isotropic rectangular plate based on modified FSDT assumptionWu, Y.-C.; Ma, C.-C.; Liou, H.-C.; CHIEN-CHING MA Acta Mechanica5
5052020Study in-plane elasticity of alveolar epithelial cells with different oncogene expression levels using microfluidic devicesKo P.-L.; Lee T.-A.; Wang C.-K.; Peng C.-C.; Liao W.-H.; Tung Y.-C.; CHIEN-KAI WANG 21st International Conference on Miniaturized Systems for Chemistry and Life Sciences
5062020Study endothelial cell sprouting in three-dimensional matrix under oxygen gradients using microfluidic devicesShih H.-C.; Yeh S.-L.; Wang C.-K.; Lee T.-A.; Liao W.-H.; Tung Y.-C.; CHIEN-KAI WANG 21st International Conference on Miniaturized Systems for Chemistry and Life Sciences
5072020In-situ measurements of strain distribution by coupling digital image correlation and an optical microscopeMa, C.-C.; Ho, H.-W.; Chou, W.-H.; Chen, D.-R.; Chang, C.-Y.; CHIEN-CHING MA Microsystem Technologies0
5082020Permanent-magnet machine flux and torque response under the influence of turn faultHsu, C.-C.; Yang, S.-C.; SHIH-CHIN YANG IEEE Transactions on Industrial Electronics
5092020無人機馬達幅值調變低取樣頻率之無感測器適應性控制開發黃靖倫; 楊士進; 張鈞傑; 林奕任; 陳俊佑; 周柏寰; 楊士進 機械工業雜誌
5102020Mechanical and elastocaloric effect of aged Ni-rich TiNi shape memory alloy under load-controlled deformationShen, J.-J.; Lu, N.-H.; CHIH-HSUAN CHEN Materials Science and Engineering A18
5112020Reliability and safety assessment of automated driving systems: Review and previewWu K.-W; Liao C.-C; Wu W.-F.; WEN-FANG WU IEEE International Conference on Industrial Engineering and Engineering Management
5122020Design of high-speed permanent magnet motor considering rotor radial force and motor lossesLiu N.-W; Hung K.-Y; Yang S.-C; Lee F.-C; Liu C.-J.; SHIH-CHIN YANG Energies
5132020Biomechanical differences during ascent on regular stairs and on a stairmillChang B.-C.; Khan M.I.; Prado A.; Yang N.; Ou J.; Agrawal S.K.; BIING-CHWEN CHANG Journal of Biomechanics8
5142020Utilizing the inverse Marangoni convection to facilitate extremely-low-flow-rate intermittent spray cooling for large-area systemsTsang, Sung; Sun, Chen-li; CHEN-LI SUN APPLIED THERMAL ENGINEERING6
5152020On the similarities between the resonance behaviors of water balloons and water dropsChang C.-T.; CHUN-TI CHANG Physics of Fluids
5162020The in-situ experiment of earth-air heat exchanger for a cafeteria building in subtropical monsoon climateHsu C.-Y; Huang P.-C; Liang J.-D; Chiang Y.-C; Chen S.-L.; SIH-LI CHEN Renewable Energy
5172020Meso-scale piezoelectric energy harvester for low-frequency rotational motionChen, C.T.; Chen, C.T.; Su, W.J.; WEN-JONG WU ; Vasic, D.; Vasic, D.; Costa, F.; Costa, F.; WEI-JIUN SU Proceedings of SPIE - The International Society for Optical Engineering
5182020Design optimization of a compact double-ended-tuning-fork-based resonant accelerometer for smart spindle applicationsChen, Y.-H.; Li, W.-C.; Xiao, X.-W.; Yang, C.-C.; Liu, C.-H.; WEI-CHANG LI ; CHIEN-HAO LIU Micromachines54
5192020Design and analysis of a vortex-induced bi-directional piezoelectric energy harvesterSu, W.-J.; Lin, W.-Y.; WEI-JIUN SU International Journal of Mechanical Sciences36
5202020Analysis of a cantilevered piezoelectric energy harvester in different orientations for rotational motionSu, W.-J.; Lin, J.-H.; Li, W.-C.; WEI-CHANG LI ; WEI-JIUN SU Sensors (Switzerland)2120
5212020Investigation on the differential quadrature Fabry-Pérot interferometer with variable measurement mirrorsShih Y.-C.; Tung P.-C.; Jywe W.-Y.; Chang C.-P.; Shyu L.-H.; Hsieh T.-H.; Wen-Yuh Jywe Applied Sciences (Switzerland)
5222020車削路徑自動特徵辨識及工序解析對話式CAM系統莊昇祐; 黃炬凱; 鄭志平; 蔡曜陽; 洪秉暉; 蔡曜陽 機械工業雜誌
5232020Bio-Inspired Gaze-Driven Robotic Neck BraceChang B.-C.; Zhang H.; Trigili E.; Agrawal S.K.; BIING-CHWEN CHANG Proceedings of the IEEE RAS and EMBS International Conference on Biomedical Robotics and Biomechatronics
5242020Adaptive Tracking Control of One-Dimensional Respiration Induced Moving Targets by Real-Time Magnetic Resonance Imaging FeedbackLee Y.-H.; Li X.; Simonelli J.; Lu D.; Wu H.H.; Tsao T.-C.; YU-HSIU LEE IEEE/ASME Transactions on Mechatronics
5252020Development and characterization of a DC-driven thermal oscillator using acrylate-based compositesXu, M.; Yeh, C.-C.; Chen, S.-W.; Yang, Y.-J.; YAO-JOE YANG Applied Sciences (Switzerland)1
5262020Strain glass and stress-induced martensitic transformation characteristics of Ti 40 Zr 10 Ni 40 Co 5 Cu 5 multi-principal element alloyChen, C.-H.; Lu, N.-H.; Shen, J.-J.; Chen, Y.-J.; CHIH-HSUAN CHEN Scripta Materialia11
5272020Mechatronic Implementation and Trajectory Tracking Validation of a BCI-based Human-wheelchair InterfaceChen J.-W.; Wu C.-J.; Lin Y.-T.; Kuo Y.-C.; Kuo C.-H.; CHUNG-HSIEN KUO Proceedings of the IEEE RAS and EMBS International Conference on Biomedical Robotics and Biomechatronics
5282020主任的話楊燿州 儀科中心年報
5292020極高速永磁同步電動機效率優化與設計張正敏; 楊士進; 周柏寰; 洪國原; 劉乃文; 吳奇軍; 楊士進 機械工業雜誌
5302020Safety of Human-Robot Interaction: Concepts and Implementation Based on Robot-Related StandardsTing, Hsiang-Yuan; Hsu, Huan-Kun; Huang, Ming-Bao; Huang, Han-Pang; HAN-PANG HUANG JOURNAL OF THE CHINESE SOCIETY OF MECHANICAL ENGINEERS
5312020The demonstration of carbon nanotubes (CNTs) as flip-chip connections in 3-D integrated circuits with an ultralow connection resistanceLiao, M.-H.; Lu, P.-Y.; Su, W.-J.; Chen, S.-C.; Hung, H.-T.; Kao, C.-R.; Pu, W.-C.; Chen, C.-C.A.; Lee, M.-H.; MING-HAN LIAO ; WEI-JIUN SU ; C. ROBERT KAO IEEE Transactions on Electron Devices6
5322020Multiparametric characterization of heterogeneous soft materials using contact point detection-based atomic force microscopyYang, C.-W.; Chen, C.-H.; Ding, R.-F.; Liao, H.-S.; Hwang, I.-S.; HSIEN-SHUN LIAO Applied Surface Science6
5332020Surface modification of feconicr medium-entropy alloy (MEA) using octadecyltrichlorosilane and atmospheric-pressure plasma jetCheng, P.-Y.; Lu, N.-H.; Lu, Y.-S.; Chen, C.-H.; Lee, Y.-L.; Chen, J.-Z.; CHIH-HSUAN CHEN ; JIAN-ZHANG CHEN ; YUEH-LIEN LEE Polymers43
5342020The effects of different slurry concentrations and wire speeds for swinging and non-swinging wire-saw machiningYAO-YANG TSAI ; Chen, Y.-C.; YUNN-SHIUAN LIAO ; Hsieh, C.-C.; Tsao, C.-C.; Hsu, C.-Y.Processes
5352020Synthesis and characterization of nanoporous copper thin films by magnetron sputtering and subsequent dealloyingLee, Y.-Z.; Zeng, W.-Y.; Cheng, I.-C.; I-Chung Cheng Thin Solid Films14
5362019Enhancing Condensation Heat Transfer on Three-Dimensional Hybrid SurfacesLo, Ching-Wen; Chu, Yu-Cheng; Yen, Ming-Han; MING-CHANG LU Joule6657
5372019A mechanism based on finger-sliding behavior for designing radial menusLiang, Sheau Farn Max; Menozzi, Marino; YING-YIN HUANG International Journal of Industrial Ergonomics32
5382019Bioinspired Durable Superhydrophobic Surface from a Hierarchically Wrinkled Nanoporous PolymerChen, Ting Lun; Huang, Ching Yu; Xie, Yi Ting; YA-YU CHIANG ; Chen, Yen Ming; Hsueh, Han YuACS Applied Materials and Interfaces3732
5392019A screening tool for occupations requiring a high level of attentional performanceYING-YIN HUANG ; Menozzi, Marino; Favey, CarolineInternational Journal of Industrial Ergonomics53
5402019Training visual attention in a naturalistic visual environmentYING-YIN HUANG ; Menozzi, Marino; Beldi, Guido; Brand, YvesErgonomics22
5412019Bio-O-Pump: a novel portable microfluidic device driven by osmotic pressureChuang, Chen Han; YA-YU CHIANG Sensors and Actuators, B: Chemical1614
5422019In Vitro Microfluidics-based Blood-brain Barrier ModelYA-YU CHIANG ; Tu, Kai HongProceedings of the 14th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 201910
5432019Shape memory characteristics of (TiZrHf)<inf>50</inf>Ni<inf>25</inf>Co<inf>10</inf>Cu<inf>15</inf> high entropy shape memory alloyChen, Chih Hsuan; Chen C.-H. Scripta Materialia6968
5442019In vitro microfluidics-based blood-brain barrier model with in-line teer measurementTu, Kai Hong; YA-YU CHIANG 23rd International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 20190
5452019Wrinkle texture guided cell growth orientationJiang, Bing Cheng; YA-YU CHIANG 23rd International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 20190
5462019Effect of hydrophobic inclined patterns on pool boiling performance of cylindrical copper surfacesSujith, Sujith Kumar; Chuang, Yu Hsuan; Mata Arenales, Mario R.; Joseph, Albin; PING-HEI CHEN Heat and Mass Transfer/Waerme- und Stoffuebertragung10
5472019Technologies and Eco-innovation towards Sustainability II: Eco Design Assessment and ManagementHu, Allen H.; Matsumoto, Mitsutaka; Kuo, Tsai Chi; SHANA SMITH Technologies and Eco-innovation towards Sustainability II: Eco Design Assessment and Management20
5482019Theoretical analysis and experimental study of a nonlinear U-shaped bi-directional piezoelectric energy harvesterShih, Hsuan An; WEI-JIUN SU Smart Materials and Structures2121
5492019Investigation on the impact of nongeometric uncertainty in dynamic performance of serial and parallel robot manipulatorsTsai, Y.-K.; KUEI-YUAN CHAN Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science42
5502019Do funding sources matter?: The impact of university-industry collaboration funding sources on innovation performance of universitiesFan, H.-L.; Huang, M.-H.; DAR-ZEN CHEN ; MU-HSUAN HUANG Technology Analysis and Strategic Management1310
5512019Analytical and experimental evaluation of stresses in elastic annuli subjected to three-point loading on the outer surfaceTokovyy, Y.V.; Huang, Y.-H. ; Yen, C.-Y.; CHIEN-CHING MA Applied Mathematical Modelling21
5522019Formability study on stamping an engine hood with aluminum alloy sheetLin, C.-W.; Chen, F.-K.; FUH-KUO CHEN IOP Conference Series: Materials Science and Engineering30
5532019Bibliographically coupled patents: Their temporal pattern and combined relevanceKuan, C.-H.; Chen, D.-Z.; MU-HSUAN HUANG ; DAR-ZEN CHEN Journal of Informetrics76
5542019Are invalid patents still cited?Dong, H.-R.; Chen, D.-Z.; Huang, M.-H.; DAR-ZEN CHEN Proceedings of the Association for Information Science and Technology30
5552019Development of solar home system with dual energy storageHuang, Bin-Juine; Hsu, Po-Chien; Wang, Yi-Hung; Tang, Tzu-Chiao; Wang, Jia-Wei; Dong, Xin-Hong; Lee, Ming-Jia; Yeh, Jen-Fu; Dong, Zi-Ming; Wu, Min-Han; Sia, Shen-Jie; Li, Kang; BIN-JUINE HUANG ; KUNG-YEN LEE ; KANG LI SN Applied Sciences32
5562019On the end-point deflection of static balanced manipulators with various spring configurationsJhuang, C.-S.; Chen, D.-Z.; DAR-ZEN CHEN Proceedings of the ASME Design Engineering Technical Conference00
5572019Half-metallic property induced by double exchange interaction in the double perovskite Bi2BB'O6 (B, B0 = 3d transitional metal) via first-principles calculationsLin H.-Z.; Hu C.-Y.; Lee P.-H.; Yan A.Z.-Z.; Wu W.-F. ; Chen Y.-F.; YANG-FANG CHEN Materials1616
5582019High-speed force mapping based on an astigmatic atomic force microscopeHSIEN-SHUN LIAO ; Lei, KK; YEN-FEN TSENG Measurement Science and Technology66
5592019Experimental and Numerical Investigation of Resonance Characteristics of Novel Pumping Element Driven by Two Piezoelectric BimorphsYu-Chih Lin; YU-HSI HUANG ; Kwen-Wei ChuApplied Sciences66
5602019A Blood Pressure Monitoring Device with Tactile and Tension Sensors Assisted by a Machine Learning TechniqueHuang, K.-H.; Tan, F.; TZUNG-DAU WANG ; YAO-JOE YANG 2019 20th International Conference on Solid-State Sensors, Actuators and Microsystems and Eurosensors XXXIII, TRANSDUCERS 2019 and EUROSENSORS XXXIII50
5612019Strength and Performance of Straw Ash Cement MortarWang, Fucheng; Wang, Chun; Yi, Shujuan; FU-CHENG WANG Revue des Composites et des Materiaux Avances10
5622019Flexibility Optimized Control for Robot Efficient Moving in Corridors Based on Viability TheoryLiu, Lei; Liu, Sai; Wu, Yuepeng; Yang, Ye; Gao, Yan; Wang, Fu-Cheng; FU-CHENG WANG IEEE Access54
5632019Construction of human behavior cognitive Map for robotsLin, W.-Z.; Wang, S.-H.; Huang, H.-P.; HAN-PANG HUANG Applied Sciences (Switzerland)11
5642019Analytical Solution for Inverse Kinematics Using Dual QuaternionsLin, P.-F.; Huang, M.-B.; Huang, H.-P.; HAN-PANG HUANG IEEE Access1310
5652019以混合式多準則決策模型探討我國小型風力發電機產業之發展李洋煥; 胡舒婷; 吳文方 2019工程技術、管理科學與教育研討會
5662019Implementation Issues of Flux Linkage Estimation on Permanent Magnet Machine Position Sensorless Drive at Low SpeedChen, G.-R.; Chen, J.-Y.; Yang, S.-C.; SHIH-CHIN YANG IEEE Access
5672019A Teleoperation System for Reproducing Tactile Perception Using Frequency Channel SegregationLin, P.-H.; Smith, S.; SHANA SMITH Lecture Notes in Electrical Engineering
5682019Flexible Tactile and Shear Force Sensing Array Based on Multilayered Mxene/Carbon Nanotube CompositesWang, S.; Yang, Y.-J.; YAO-JOE YANG 2019 20th International Conference on Solid-State Sensors, Actuators and Microsystems and Eurosensors XXXIII, TRANSDUCERS 2019 and EUROSENSORS XXXIII
5692019Resonant Frequency Reduction of Piezoelectric Voltage Energy Harvester by Elastic Boundary ConditionOng, Z.C.; Huang, Y.-H.; Chou, S.-L.; YU-HSI HUANG Journal of Mechanics
5702019Terrain Classification, Navigation, and Gait Selection in a Leg-Wheel Transformable Robot by Using Environmental RGBD InformationWang, T.-H.; Sung, D.-G.; Lin, P.-C.; PEI-CHUN LIN 2018 International Automatic Control Conference
5712019Development of low-melting point molten salts and detection of solid-to-liquid transitions by alternative techniques to DSCRodr?guez-Laguna, M.D.R.; G?mez-Romero, P.; Sotomayor Torres, C.M.; Lu, M.-C.; Ch?vez-?ngel, E.; MING-CHANG LU Solar Energy Materials and Solar Cells
5722019Fabrication of a light-intensity-enhancement component by using computer-controlled ultraviolet curing and air-pressing imprintingChang, N.-W.; Ke, K.-C.; Yang, S.-Y.; SEN-YEU YANG Microsystem Technologies
5732019A Torque-actuated dissipative spring loaded inverted pendulum model with rolling contact and Its application to hexapod runningHu, C.-J.; Wang, T.-K.; Huang, C.-K.; Lin, P.-C.; PEI-CHUN LIN Bioinspiration and Biomimetics
5742019Fabrication of large-area V-groove microstructures using gasbag-pressuring edge-irradiating UV imprintingHuang, Y.-Y.; Ke, K.-C.; Yang, S.-Y.; SEN-YEU YANG Microsystem Technologies
5752019On the Thermal Memory Effect Reduction of Power Amplifiers Using Pulse ModulationWang T.-H.; Chen Y.-H.; Chang C.-W.; Li K.-M.; Chen J.-H. ; Staudinger J.; KUAN-MING LI IEEE Microwave and Wireless Components Letters
5762019Development of a novel transmission engaging model for characterizing the friction behavior of a feed drive systemLiu C.-C.; Tsai M.-S. ; Cheng C.-C.Mechanism and Machine Theory1211
5772019Performance Gap between Valid and Invalid Patents in Six Technology FieldsDong, H.-R.; Chen, D.-Z.; DAR-ZEN CHEN ; MU-HSUAN HUANG IEEE International Conference on Industrial Engineering and Engineering Management10
5782019Experiments for suitability of plastic heat exchangers for dehumidification applicationsMING-CHANG LU ; Amer M.; Chen M.-R.; Sajjad U.; Ali H.M.; Abbas N.; Lu M.-C.; Wang C.-C.Applied Thermal Engineering1514
5792019Do Long-term Patents Have a Higher Citation Impact?Dong, H.-R.; Chen, D.-Z. ; Huang, M.-H. IEEE International Conference on Industrial Engineering and Engineering Management20
5802019A tactile sensing array integrated with tension sensor for continuously monitoring blood pulse wavesHuang, K.-H.; Tan, F.; TZUNG-DAU WANG ; YAO-JOE YANG Microelectronic Engineering64
5812019A miniature nickel-diamond electroplated wheel for grinding of the arterial calcified plaqueLyu J.J; Wu X; Liu Y; Liu Y; Li A.D.-R; Zheng Y; Shih A.; DIAN-RU LI 80
5822019Novel dynamic modeling of feed drive system using subspace methodHuang T.-Y.; Tsai M.-S. ; Lin M.-T.; Cheng C.-C.Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an21
5832019The design and the performance of an ultrahigh vacuum 3He fridge-based scanning tunneling microscope with a double deck sample stage for in-situ tip treatmentGuan, Syu-You; HSIEN-SHUN LIAO ; Juang, Bo-Jing; Chin, Shu-Cheng; Chuang, Tien-Ming; Chang, Chia-SengUltramicroscopy75
5842019我國再生能源發展之情境分析與發電量預測洪瑞亨; 鄭力中; 吳文方 2019工程技術、管理科學與教育研討會
5852019Impacts of load profiles on the optimization of power management of a green building employing fuel cellsWang F.-C. ; Lin K.-M.Energies2014
5862019Cutting of blood clots – Experiment and smooth particle Galerkin modellingLiu Y; Zheng Y; Li A.D.-R; Liu Y; Savastano L.E; Shih A.J.; DIAN-RU LI CIRP Annals1311
5872019Ultrafast Diameter-Dependent Water Evaporation from NanoporesMING-CHANG LU ; Li Y.; Chen H.; Xiao S.; Alibakhshi M.A.; Lo C.-W.; Lu M.-C.; Duan C.ACS Nano6463
5882019Development of leaping/flipping behaviors in a quadruped robot with passive compliant legsTseng, K.-Y.; Lin, P.-C.; PEI-CHUN LIN IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM
5892019Reactive force analysis and modulation of the individual legs in a running hexapod robotKao, C.-J.; Chen, C.-S.; Lin, P.-C.; PEI-CHUN LIN IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM
5902019Deposition of highly transparent and conductive Ga-doped zinc oxide films on tilted substrates by atmospheric pressure plasma jetChen, W.-K.; Huang, J.-C.; Chen, Y.-C.; Lee, M.-T.; Juang, J.-Y.; JIA-YANG JUANG Journal of Alloys and Compounds
5912019Deposition of highly transparent and conductive films on tilted substrates by atmospheric pressure plasma jetChen, Y.-C.; Chen, W.-K.; Huang, J.-C.; Juang, J.-Y.; JIA-YANG JUANG ASME 2019 28th Conference on Information Storage and Processing Systems, ISPS 20190
5922019A geometric error measurement system for linear guideway assembly and calibrationHsieh T.-H.; Chen P.-Y.; Jywe W.-Y.; Chen G.-W.; Wang M.-S.; Wen-Yuh Jywe Applied Sciences (Switzerland)
5932019Benefits of the inerter in vibration suppression of a milling machineWang F.-C. ; Lee C.-H.; Zheng R.-Q.Journal of the Franklin Institute1314
5942019Performance of die cooling system design in hot stamping processHung, T.-H.; Wang, S.-W.; ChiuHuang, C.-K.; Chen, F.-K.; FUH-KUO CHEN Journal of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an54
5952019Enhancement of Electrical Conductivity of Transparent Ga -Doped Zinc Oxide Films via Quench Reduction in an Atmospheric Pressure Plasma JetChou, Pin-Han; Huang, Jing-Chi; KUO-LONG PAN ; JIA-YANG JUANG Physical Review Applied54
5962019Precipitation hardening by nanoscale Ti<inf>2</inf>Ni phase in high Ti-rich Ti<inf>52.6</inf>Ni<inf>46.8</inf>Si<inf>0.6</inf> melt-spun ribbonChen, C.-H.; Wang, Y.-C.; Wu, S.-K.; CHIH-HSUAN CHEN ; SHYI-KAAN WU Journal of Alloys and Compounds99
5972019Bibliographically coupled patents: Their temporal pattern and combined relevanceKuan, C.-H.; Chen, D.-Z.; DAR-ZEN CHEN 17th International Conference on Scientometrics and Informetrics, ISSI 2019 - Proceedings0
5982019Kinematic Compatible Elbow Exoskeletons with Static BalanceJhuang, C.-S.; Bao, J.-A.; Chen, D.-Z.; DAR-ZEN CHEN Mechanisms and Machine Science10
5992019A Difference Detection Mechanism Between API Cache and Data Center in Smart ManufacturingYen C.-T.; Tsung C.-K.; Wu W.-F. Lecture Notes in Electrical Engineering00
6002019Micro-lens fabrication by a long-stroke precision stage with switching control based on model response predictionWang F.-C. ; Peng Y.-K.; Lu J.-F.; Chung T.-T.; JIA-YUSH YEN Microsystem Technologies12
6012019An Investigation into the Thermal Boundary Resistance Associated with the Twin Boundary in Bismuth TellurideHsieh I.-T.; Huang M.-J. Nanoscale and Microscale Thermophysical Engineering55
6022019Optical 3-D profilometry for measuring semiconductor wafer surfaces with extremely variant reflectivitiesChen, L.-C.; Duong, D.-H.; Chen, C.-S.; LIANG-CHIA CHEN Applied Sciences (Switzerland)
6032019Full-field microsurface profilometry using image correlation without vertical scanningWu, G.-W.; Nguyen, D.T.; Chen, L.-C.; LIANG-CHIA CHEN Optics Letters
6042019Current Sensing Issues on Saliency-Based Position Sensorless Drive for Permanent Magnet Machine with PWM Voltage InjectionChen, J.-Y.; Yang, S.-C.; Chen, G.-R.; SHIH-CHIN YANG IECON Proceedings (Industrial Electronics Conference)
6052019Sensorless Vibration Frequency Estimation of Servo Drive System based on the Disturbance Torque EstimationC.-L. Huang; S.-C. Yang; SHIH-CHIN YANG IEEE Transaction on Industrial Electronics
6062019Special issue on precision dimensional measurementsFan, K.-C.; Chen, L.-C.; LIANG-CHIA CHEN Applied Sciences (Switzerland)
6072019Investigating the impact of component uncertainty on autonomous vehicle overtaking maneuversTsai, H.-T.; Chan, K.-Y.; KUEI-YUAN CHAN Proceedings of the ASME Design Engineering Technical Conference
6082019Evaluation of tool scraping wear conditions by image pattern recognition systemJywe W.-Y.; Hsieh T.-H.; Chen P.-Y.; Wang M.-S.; Lin Y.-T.; Wen-Yuh Jywe International Journal of Advanced Manufacturing Technology
6092019A Blood Pressure Monitoring Device with Tactile and Tension Sensors Assisted by Machine Learning TechniqueK.-H. Huang; F. Tan; T.-D. Wang; Y.-J. Yang; YAO-JOE YANG the 20th International Conference on Solid-State Sensors, Actuators and Microsystems (Transducer 2019)
6102019High-Precision Permaent Magent Motor Design for Satellite Attitude Control with High Torque Density and Low Torque RippleChou, P.-H.; Yang, S.-C.; Jhong, C.-J.; Huang, J.-I.; Chen, J.-Y.; SHIH-CHIN YANG IECON Proceedings (Industrial Electronics Conference)
6112019Comparison of High Speed Permanent Magnet Machine Sensorless Drive using Trapezoidal BLDC and Sinusoidal FOC under Insufficient PWM FrequencyHuang, C.-L.; Chen, G.-R.; Yang, S.-C.; Hsu, Y.-L.; SHIH-CHIN YANG 2019 IEEE Energy Conversion Congress and Exposition, ECCE 2019
6122019Tactile Perception Effects of Shear Force Feedback and Vibrotactile Feedback on Virtual Texture RepresentationsLin, C.-W.; Smith, S.; SHANA SMITH Lecture Notes in Electrical Engineering
6132019A Contactless Micromachined Respiratory Sensor Using Postive Temperature Coffieicent MaterialC.-C. Yeh; M.-X. Xu; Y.-J. Yang; YAO-JOE YANG 32nd International Conference on Micro Electro Mechanical Systems
6142019Implementation of low inductance permanent magnet machine drive with LC filter for field oriented controlHsu, C.-C.; Yang, S.-C.; Chen, J.-Y.; SHIH-CHIN YANG 2019 IEEE Energy Conversion Congress and Exposition, ECCE 2019
6152019A nested-loop iterative learning control for robot manipulatorsLee Y.-H.; Hsu S.-C.; Du Y.-Y.; Hu J.-S.; Tsao T.-C.; YU-HSIU LEE IFAC-PapersOnLine
6162019A Highly Sensitive Capacitive Pressure Sensor with Microdome Structure for Robot Tactile DetectionWang, S.; Huang, K.-H.; Yang, Y.-J.; YAO-JOE YANG 2019 20th International Conference on Solid-State Sensors, Actuators and Microsystems and Eurosensors XXXIII, TRANSDUCERS 2019 and EUROSENSORS XXXIII
6172019A respiratory transducer array to exploit the ultra-sensitive temperature dependence of an acrylate-based composite for real-time respiration rate monitoringYeh, C.-C.; Xu, M.-X.; Yang, Y.-J.J.; YAO-JOE YANG Applied Physics Letters
6182019Experimental modeling and application of push-pull electrostatic speakersChiang, H.-Y.; Huang, Y.-H.; YU-HSI HUANG Journal of the Acoustical Society of America
6192019A Wireless Parylene-Based Cardiovascular Pressure Sensor with Mxene FilmLo, S.-H.; Xu, M.-X.; Yang, Y.-J.; YAO-JOE YANG 2019 20th International Conference on Solid-State Sensors, Actuators and Microsystems and Eurosensors XXXIII
6202019Novel chromatic confocal differential interference contrast prototypeBelkner, J.; Liu, H.-W.; Manske, E.; Chen, L.-C.; LIANG-CHIA CHEN Proceedings of SPIE - The International Society for Optical Engineering
6212019The computer aided cutting planning of components using genetic algorithms for decommissioning of a nuclear reactorTsai, P.-C.; Huang, X.; Hung, Y.-H.; Huang, C.-H.; Smith, S.; SHANA SMITH Annals of Nuclear Energy
6222019Dynamic period-two gait generation in a hexapod robot based on the fixed-point motion of a reduced-order modelLu, W.-C.; Lin, P.-C.; PEI-CHUN LIN IEEE International Conference on Robotics and Automation
6232019Thermal spreading resistance of heat sources on rectangular flux channel under non-uniform convective coolingHuang, M.-J.; Shaw, Y.-R.; Chien, H.-C.; MEI-JIAU HUANG International Journal of Thermal Sciences
6242019The temperature distribution due to the ballistic-diffusive phonon transportHuang, M.-J.; Huang, H.-B.; MEI-JIAU HUANG International Journal of Heat and Mass Transfer
6252019Advantages of Flux-based Position Sensorless Drive for Surface Permanent Magnet MachineChen, G.-R.; Yang, S.-C.; Chen, J.-Y.; SHIH-CHIN YANG IECON Proceedings (Industrial Electronics Conference)
6262019A Surface-Mounted Permanent-Magnet Motor with Sinusoidal Pulsewidth-Modulation-Shaped MagnetsYang, Y.-P.; Peng, M.-T.; YEE-PIEN YANG IEEE Transactions on Magnetics
6272019Analysis of Saliency-Based Position Estimation for Permanent Magnet Machine with Saturation Reflected Non-Sinusoidal InductanceHung, K.-Y.; Liu, N.-W.; Yang, S.-C.; SHIH-CHIN YANG 2019 IEEE 4th International Future Energy Electronics Conference, IFEEC 20190
6282019Study of fractal electrode designs for buckypaper-based micro-supercapacitorsHuang, K.-H.; Lin, C.-T.; Chen, Y.-T.; Yang, Y.-J.J.; YAO-JOE YANG Journal of Applied Physics
6292019On the microexplosion mechanisms of burning droplets blended with biodiesel and alcoholChao, C.-Y.; Tsai, H.-W.; Pan, K.-L.; Hsieh, C.-W.; KUO-LONG PAN Combustion and Flame
6302019Tube-crawling soft robots driven by multistable buckling mechanicsYeh, C.-Y.; Chou, S.-C.; Huang, H.-W.; Yu, H.-C.; Juang, J.-Y.; JIA-YANG JUANG Extreme Mechanics Letters
6312019Rotational separation after temporary coalescence in binary droplet collisionsPan K.-L; Huang K.-L; Hsieh W.-T; Lu C.-R.; KUO-LONG PAN Physical Review Fluids
6322019A novel surface descriptor for automated 3-D object recognition and localizationChen, L.-C.; Nguyen, T.-H.; LIANG-CHIA CHEN Sensors (Switzerland)
6332019Improving hole-searching accuracy for peg-in-hole assembly with manipulator harmonic drive uncertaintyChen, P.-Y.; Chan, K.-Y.; KUEI-YUAN CHAN Proceedings of the ASME Design Engineering Technical Conference
6342019Motion Programs with Better Characteristic ValuesHsu, K.-L.; Chung, J.Y.; KUAN-LUN HSU Mechanisms and Machine Science
6352019High speed permanent magnet synchronous machine drive under insufficient sample frequencyChen, W.-C.; Yang, S.-C.; Chou, P.-H.; Hsu, Y.-L.; Chen, J.-Y.; Chen, G.-R.; Chen, C.-S.; SHIH-CHIN YANG 2019 IEEE International Electric Machines and Drives Conference
6362019Novel Range Image Segmentation Using Region-Growing and Surface Classification | 運用區域成長及表面分類之創新三維影像分割技術Chen, L.-C.; Liang, C.-W.; Nguyen, X.-L.; Lin, S.-T.; LIANG-CHIA CHEN Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao
6372019Experimental and analytical studies on colliding merging of two immiscible dropsC. P. Huang; K. L. Pan; KUO-LONG PAN American Physical Society (APS) March Meeting 2019
6382019Multivariate analysis of extrapolating time-invariant data with uncertaintyMillogo, J.; Chan, K.-Y.; KUEI-YUAN CHAN International Journal for Uncertainty Quantification
6392019Absolute depth measurement using multiphase normalized cross-correlation for precise optical profilometryDuong, D.-H.; Chen, C.-S.; Chen, L.-C.; LIANG-CHIA CHEN Sensors (Switzerland)
6402019Probabilistic modeling of driver behaviors at urban crossroadsLiu, Y.-C.; Chan, K.-Y.; KUEI-YUAN CHAN Proceedings of the ASME Design Engineering Technical Conference
6412019Enhanced efficiency of photovoltaic panels by integrating a spray cooling system with shallow geothermal energy heat exchangerYang, L.-H.; Liang, J.-D.; Hsu, C.-Y.; Yang, T.-H.; Chen, S.-L.; SIH-LI CHEN Renewable Energy
6422019Behavioral classification of drivers for driving efficiency related ADAS using artificial neural networkCheng Z.-J.; Jeng L.-W.; Li K.; KANG LI 2018 IEEE International Conference on Advanced Manufacturing
6432019Precision measurement and comprehensive analysis of dielectrophoretic crossover behavior of micro-particlesKao, Y.-C.; Lu, Y.-W.; Sun, C.; Hung, C.-L.; Juang, J.-Y.; JIA-YANG JUANG ASME 2019 28th Conference on Information Storage and Processing Systems, ISPS 20190
6442019Topological reconfigurations based on a concatenation of Bennett and RPRP mechanismsHsu, K.-L.; Ting, K.-L.; KUAN-LUN HSU Proceedings of the ASME Design Engineering Technical Conference
6452019Pinching Dynamics and Satellite Droplet Formation in Symmetrical Droplet CollisionsHuang K.-L; Pan K.-L; Josserand C.; KUO-LONG PAN Physical Review Letters25
6462019INVESTIGATING THE IMPACT OF COMPONENT UNCERTAINTY ON AUTONOMOUS VEHICLES OVERTAKING MANEUVERSHsin-Ting Tsai; Kuei-Yuan Chan; KUEI-YUAN CHAN ASME 2019 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2019)
6472019Performance enhancement of an ethylene-fueled scramjet combustor using a porous cylindrical burnerLee W.-S; Pan K.-L.; KUO-LONG PAN AIAA Propulsion and Energy Forum and Exposition, 2019
6482019Data-driven ILC for trajectory tracking in nonlinear dynamic systemsLee Y.-H.; Tsao T.-C.; YU-HSIU LEE ASME 2019 Dynamic Systems and Control Conference, DSCC 2019
6492019Design of multi-DOF spherical piezoelectric motor using electrode configuration based actuating unitsLin C.-Y; Sung Y.-T; Huang Y.-H.; YU-HSI HUANG Proceedings of the ASME Design Engineering Technical Conference
6502019An Energy Saving Strategy of Torque and Battery Distribution for an Electric Vehicle Driven by Multiple Traction MotorsTseng, Y.-H.; Yang, Y.-P.; YEE-PIEN YANG 2019 Electric Vehicles International Conference, EV 20190
6512019A Contactless Micromachined Respiratory Sensor using Positive Temperature Coefficient MaterialYeh, C.-C.; Xu, M.-X.; Yang, Y.-J.; YAO-JOE YANG Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)
6522019Fabrication of a flexible wireless pressure sensor for intravascular blood pressure monitoringYeh, C.-C.; Lo, S.-H.; Xu, M.-X.; Yang, Y.-J.; YAO-JOE YANG Microelectronic Engineering
6532019Wearable Inverse Light-Emitting Diode Sensor for Measuring Light Intensity at Specific Wavelengths in Light TherapyTsai, H.-Y.; Su, F.-C.; Chou, C.-H.; Lin, Y.-H.; Huang, K.-C.; Yang, Y.-J.J.; Kuo, L.-W.; Liao, L.-D.; Yu, H.-S.; YAO-JOE YANG IEEE Transactions on Instrumentation and Measurement
6542019Digital Implementation Issues on High Speed Permanent Magnet Machine FOC Drive under Insufficient Sample FrequencyYang, S.-C.; Hsu, Y.-L.; Chou, P.-H.; Chen, J.-Y.; Chen, G.-R.; SHIH-CHIN YANG IEEE Access
6552019The effect of operating conditions on the optically induced electrokinetic (OEK)-based manipulation of magnetic microbeads in a microfluidic systemHong, J.-L.; Yang, C.-M.; Chu, P.-Y.; Chou, W.-P.; Liao, C.-J.; Hsieh, C.-H.; Wu, M.-H.; Chen, P.-H.; PING-HEI CHEN Sensors and Actuators, B: Chemical
6562019A feedback force controller fusing traditional control and reinforcement learning strategiesChen, B.-H.; Wang, Y.-H.; Lin, P.-C.; PEI-CHUN LIN IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM
6572019Robot-based 3-D machine vision using circular-feature normal estimation and multi-dimensional image fusionChen, L.-C.; Le, M.-T.; Lin, C.-J.; LIANG-CHIA CHEN IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM
6582019The Development of a Dynamic Model to Investigate the Dielectric Layer Thickness Effect for the Device Performance in Triboelectric NanogeneratorsLiao, M.-H.; Wu, C.-C.; Su, W.-J.; Chen, S.-C.; Lee, M.-H.; MING-HAN LIAO ; WEI-JIUN SU IEEE Transactions on Electron Devices
6592019Optimization analysis of waste heat recovery district cooling system on a remote island: Case study Green IslandHsu, C.-Y.; Lin, T.-Y.; Liang, J.-D.; Lai, C.-H.; Chen, S.-L.; SIH-LI CHEN Energy Conversion and Management
6602019Precise microscopic profilometry using diffractive image correlation and theoretical model simulationWu, G.-W.; Jiang, M.-J.; Chen, L.-C.; LIANG-CHIA CHEN Proceedings of SPIE - The International Society for Optical Engineering
6612019On wind turbine loads during the evening transition periodLu N.-Y.; Basu S.; Manuel L.; NAN-YOU LU Wind Energy
6622019Investigation and mapping strategy on influence of surface tilting in diffractive pattern correlation profilometryWu, G.-W.; Jiang, M.-J.; Chen, L.-C.; LIANG-CHIA CHEN Proceedings of SPIE - The International Society for Optical Engineering
6632019Fabrication of double-sided micro-lens array using UV injection moldingChen, X.-L.; Ke, K.-C.; Chang, N.-W.; Chen, Y.-H.; Yang, S.-Y.; SEN-YEU YANG International Polymer Processing
6642019An augmented reality-based training system for manual milling operationsChuang T.-J; Yang C.-K; Smith S.; SHANA SMITH Proceedings of the ASME Design Engineering Technical Conference
6652019Utilization of optically induced dielectrophoresis in a microfluidic system for sorting and isolation of cells with varied degree of viability: Demonstration of the sorting and isolation of drug-treated cancer cells with various degrees of anti-cancer drug resistance gene expressionChu, P.-Y.; Liao, C.-J.; Hsieh, C.-H.; Wang, H.-M.; Chou, W.-P.; Chen, P.-H.; Wu, M.-H.; PING-HEI CHEN Sensors and Actuators, B: Chemical
6662019Open-Loop Control of Voice Coil Motor with Magnetic Restoring Force Using High-Low Frequency Composite SignalsChang Y.-H; Liu C.-S; Chen I.-W; Tsai M.-S; Tseng H.-C.; MENG-SHIUN TSAI IEEE Access
6672019Heat transfer and its innovative applicationsChen, P.-H.; Cho, H.H.; PING-HEI CHEN Inventions
6682019Microelectromechanical system-based biocompatible artificial skin phantomsCHIEN-HAO LIU ; Huang, Yin-Chen; Li, Shang-Hsuan; Chen, Yen-An; Wang, Wesley Z; JIASHING YU ; Shih, Wen-PinMicro & Nano Letters43
6692019Two-dimensional Technology Profiling of Patent PortfolioKuan, C.-H.; Tu, W.-M.; Chen, D.-Z.; DAR-ZEN CHEN IEEE International Conference on Industrial Engineering and Engineering Management10
6702019Synthesis of Double-Rocker Mechanisms for Motion Generation Using Fourier DescriptorHsieh C.-Y.; Shieh W.-B.; Chen C.-K.; Lee J.-J. Mechanisms and Machine Science10
6712019Motion analysis of planar flexible mechanisms using vector form methodWang M.-L.; Wu T.-Y.; Lee J.-J. Mechanisms and Machine Science00
6722019On Wind Turbine Loads During Thunderstorm Downbursts in Contrasting Atmospheric Stability RegimesNAN-YOU LU ; Hawbecker, Patrick; Basu, Sukanta; Manuel, LanceEnergies1311
6732019Design and In Vivo Verification of a CMOS Bone-Guided Cochlear Implant Microsystem.Qian, Xin-Hong; Wu, Yi-Chung; Yang, Tzu-Yi; Cheng, Cheng-Hsiang; Chu, Hsing-Chien; Cheng, Wan-Hsueh; Yen, Ting-Yang; Lin, Tzu-Han; Lin, Yung-Jen; Lee, Yu-Chi; Chang, Jia-Heng; Lin, Shih-Ting; Li, Shang-Hsuan; Wu, Tsung-Chen; Huang, Chien-Chang; Wang, Sung-Hao; Lee, Chia-Fone; Yang, Chia-Hsiang; Hung, Chung-Chih; Chi, Tai-Shih; Ker, Ming-Dou; Wu, Chung-Yu; CHIEN-HAO LIU IEEE Trans. Biomed. Engineering1512
6742019Nano-precipitates in severely deformed and low-temperature aged CoCrFeMnNi high-entropy alloy studied by synchrotron small-angle X-ray scatteringHuang, Y.-C.; Tsao, C.-S.; Lin, C.; SHYI-KAAN WU ; Chen C.-H. Intermetallics
6752019Distributed current source method for modeling magnetic and eddy-current fields induced in biological objectLin, C.-Y.; Lee, K.-M.; Chen, Y.-L.; Huang, S.-C.; CHUN-YEON LIN IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM20
6762019A Difference Detection Mechanism Between API Cache and Data Center in Smart ManufacturingYen, C.T.; Tsung, C.K.; Wu, W.F. Frontier Computing -Theory, Technologies and Applications00
6772019Characterization and application of Cu based superhydrophobic catalystAnbarasan, R; Palanikumar, S; Devi, AA; PING-HEI CHEN ; Tung, KL Progress in Natural Science: Materials International44
6782019Characteristics of capillary rise in copper braids with surface modificationKuo, LS; Huang, HS; Chen, TH; Kumar, CSS; PING-HEI CHEN Journal of the Chinese Institute of Engineers10
6792019A highly sensitive pressure-sensing array for blood pressure estimation assisted by machine-learning techniquesHuang, K.-H.; Tan, F.; TZUNG-DAU WANG ; YAO-JOE YANG Sensors (Switzerland)4035
6802019End-point Deflection of a Serial Planar Manipulator with and without Static Balance by Using SpringsJhuang, C.-S.; Chen, D.-Z.; DAR-ZEN CHEN Mechanisms and Machine Science00
6812019In-situ synthesis of MgAlB4 whiskers as a promising reinforcement for aluminum matrix compositesWang, Fucheng; Li, Jiajun; Shi, Chunsheng; Liu, Enzuo; He, Chunnian; Zhao, Naiqin; FU-CHENG WANG Materials Science and Engineering: A1815
6822019以等候理論探討我國離岸風機維修過程之等候成本王靖雯; 黃庭臻; 吳文方 2019工程技術、管理科學與教育研討會
6832019我國電動機車產業發展策略分析黃敬恆; 楊鎮澤; 吳文方 2019工程技術、管理科學與教育研討會
6842019Deep, sub-wavelength acoustic patterning of complex and non-periodic shapes on soft membranes supported by air cavitiesTung, K.-W.; Chung, P.-S.; Wu, C.; Man, T.; Tiwari, S.; Wu, B.; Chou, Y.-F.; Yang, F.-L.; Chiou, P.-Y.; FU-LING YANG Lab on a Chip1918
6852019The development of a multi-loop control structure for a two-wheeled inverted pendulum robotWang, F.-C.; Wang, Z.-J.; FU-CHENG WANG 2019 6th International Conference on Control, Decision and Information Technologies10
6862019Inventor turnover and knowledge transfer: The case of wind power industryCHUN-CHIEH WANG ; DAR-ZEN CHEN 17th International Conference on Scientometrics and Informetrics, ISSI 2019 - Proceedings0
6872019The Analysis of Superelasticity and Microstructural Evolution in NiTi Single Crystals by Molecular DynamicsLu, H. Y.; Chen, Chih-Hsuan; Chen C.-H. Materials1212
6882019Elastic Analysis of Inhomogeneous Solids: History and Development in BriefTokovyy, Y.; CHIEN-CHING MA Journal of Mechanics
6892019An improved impact source locating system using FBG Rosette ArrayChen, B.-L.; CHOW-SHING SHIN Sensors (Switzerland)
6902019The analyses and verification of in-vivo animal tests on the CMOS bone-guided cochlear implant microsystemX.H. Qian; Y.C. Wu; T.Y. Yang; C.H. Cheng; H.C. Chu; W.H. Cheng; T.Y. Yen; T.H. Lin; Y.J. Lin; Y.C. Lee; J.H. Chang; S.T. Lin; S.H. Li; T.C. Wu; C.C. Huang; C.F. Lee; C.H. Yang; C.C. Hung; T.S. Chi; C.H. Liu; M.D. Ker; C.Y. Wu; CHIEN-HAO LIU IEEE Transactions on Biomedical Engineering
6912019A Biomimetic Miniaturized Microphone Array for Sound Direction Finding Applications Based on a Phase-Enhanced Electrical Coupling NetworkHuang, Chien-Chang; CHIEN-HAO LIU Sensors
6922019Bio-Inspired Soft Proboscis Actuator Driven by Dielectric Elastomer Fluid TransducersLin, Po-Wen; CHIEN-HAO LIU Polymers
6932019Deformation measurement for multiscale and multifield problems using the digital image correlation methodMa, C.-C.; Chang, C.-Y.; CHIEN-CHING MA Handbook of Mechanics of Materials
6942019Stent-Based Antennas for Smart Stent ApplicationsChen, S.-C.; Zhang, Z.-Y.; Liu, C.-H.; CHIEN-HAO LIU ISAP 2018 - 2018 International Symposium on Antennas and Propagation
6952019Robust topology optimization of solid continua for peak response serviceability to uncertain quasi-static loads with temporal correlationWang C.-K.; Ko P.-L.; CHIEN-KAI WANG Structural and Multidisciplinary Optimization
6962019Multiple Parameters Optical Sensing Using Fiber Ring Laser Based on Fiber Bragg Gratings and 1064 nm Semiconductor Optical AmplifierLiaw, S.-K.; Li, D.-C.; Lee, H.-C.; Huang, Y.-Z.; Shin, C.-S.; Lee, Y.-W.; CHOW-SHING SHIN Optics and Spectroscopy
6972019An analytical solution to the axisymmetric thermoelasticity problem for a cylinder with arbitrarily varying thermomechanical propertiesTokovyy, Y.; Chyzh, A.; CHIEN-CHING MA Acta Mechanica
6982019國際車輛自動駕駛技術發展的歷史、現況及未來展望李綱; KANG LI Magazine of the Chinese Institute of Civil and Hydraulic Engineering
6992019Development of a Knee Exoskeleton with Gear-Linkage Adaptive Mechanism葉士豪(Shih-Hao Yeh); 康志豪(Zhi-Hao Kang); 丁相元(Hsiang-Yuan Ting); 黃漢邦(Han-Pang Huang); 黃漢邦 中國機械工程學刊
7002019內藏式永磁同步馬達定力矩與定功率控制之開發許煜亮; 周柏寰; 楊士進; 陳俊佑; 劉乃文; 楊士進 機械工業雜誌
7012019石墨烯材料在車用動力系統之應用(二)胡恩蘭; 黃昆平; 蔡禎輝; 陽毅平 機械工業雜誌
7022019永磁同步電動機定子開路故障即時監測周柏寰; 楊士進; 許煜亮; 洪國原; 陳冠任; 楊士進 機械工業雜誌
7032019A metamaterial structure capable of wave attenuation and concurrent energy harvestingChen, J.-S.; Su, W.-J.; Cheng, Y.; Li, W.-C. ; Lin, C.-Y.; WEI-JIUN SU Journal of Intelligent Material Systems and Structures
7042019Analysis of a two-degree-of-freedom piezoelectric energy harvester from vortex-induced vibrationsSun, W.-P.; Su, W.-J.; WEI-JIUN SU IEEE/ASME International Conference on Advanced Intelligent Mechatronics
7052019Measurement of the Angular Errors of a Multi-Axis Machine Tool by Using A Novel Optical Rotary-Axis Calibrator [新型光學式多軸工具機旋轉軸角度定位誤差量測系統]Chen P.-Y.; Huang H.-L.; Jywe W.-Y.; Wang M.-S.; Wen-Yuh Jywe Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao
7062019石墨烯材料在車用動力系統之應用(一)黃昆平; 胡恩蘭; 林立松; 徐銘懋; 陽毅平; 蔡禎輝; 陽毅平 機械工業雜誌
7072019Effect of solution treatment on the shape memory functions of (Tizrhf)50 ni25 co10 cu15 high entropy shape memory alloyLee H.-C; Chen Y.-J; CHIH-HSUAN CHEN Entropy
7082019Structural optimization with design constraints on peak responses to temporally correlated quasi-static load processesWang C.-K.; Tsai C.-M.; Chuang B.-S.; Lo Y.-L.; CHIEN-KAI WANG Structural and Multidisciplinary Optimization
7092019Unsymmetrical finger-shape dgss for developing a compact, high-order, harmonic-suppressed bandpass filterChen, Y.-D.; Liu, C.-H.; CHIEN-HAO LIU Progress In Electromagnetics Research C
7102019Z-Axis Controllable Mille-Feuille Electrode Electrorotation Device Utilizing Levitation EffectOkamoto, Y.; Tsuchiya, T.; Moslonka, C.; Lin, Y.-S.; Tsang, S.; Marty, F.; Mizushima, A.; Sun, C.-L.; Wang, H.-Y.; Tixier-Mita, A.; Francais, O.; Le Pioufle, B.; Mita, Y.; CHEN-LI SUN 2019 20th International Conference on Solid-State Sensors, Actuators and Microsystems and Eurosensors XXXIII
7112019Performance analysis of an earth–air heat exchanger integrated into an agricultural irrigation system for a greenhouse environmental temperature-control systemYang L.-H; Huang B.-H; Hsu C.-Y; Chen S.-L.; SIH-LI CHEN Energy and Buildings
7122019Design and analysis of a stopper-engaged two-degrees-of-freedom nonlinear piezoelectric energy harvesterLiu, S.-T.; Su, W.-J.; WEI-JIUN SU Engineering Research Express
7132019Eccentricity and length distortion of spindle under the influence of temperature rising duration machining and compensation solutionJywe W.; Tran C.-S.; Hsieh T.H.; Wen-Yuh Jywe 2019 IEEE Eurasia Conference on IOT, Communication and Engineering, ECICE 2019
7142019鑽孔特徵辨識與路徑優化整合技術於模具之應用蔡玉麟; 劉楊倫; 蔡曜陽 機械工業雜誌
7152019Using the motion of the head-neck as a joystick for orientation controlZhang H.; Chang B.-C.; Rue Y.-J.; Agrawal S.K.; BIING-CHWEN CHANG IEEE Transactions on Neural Systems and Rehabilitation Engineering8
7162019A robotic neck brace to characterize head-neck motion and muscle electromyography in subjects with amyotrophic lateral sclerosisZhang H.; Chang B.-C.; Andrews J.; Mitsumoto H.; Agrawal S.; BIING-CHWEN CHANG Annals of Clinical and Translational Neurology12
7172019Real-time chatter detection and automatic suppression for intelligent spindles based on wavelet packet energy entropy and local outlier factor algorithmYao, Yung-Chen; Chen, Yu-Hsuan; Liu, Chien-Hao; Shih, Wen-Pin; CHIEN-HAO LIU The International Journal of Advanced Manufacturing Technology
7182019An embedded gateway with communication extension and backup capabilities for ZigBee-based monitoring and control systemsLin K.-F.; Lin S.-S.; Hung M.-H.; Kuo C.-H.; Chen P.-N.; CHUNG-HSIEN KUO Applied Sciences (Switzerland)
7192019Two-liquid electroosmotic thrusters for micro propulsion applicationsHuang, K.-H.; Huang, H.-F.; HSIN-FU HUANG Physics of Fluids
7202019Droplet motions fill a periodic tableSteen, P.H.; Chang, C.-T.; Bostwick, J.B.; CHUN-TI CHANG Proceedings of the National Academy of Sciences of the United States of America
7212019Innovative human-like dual robotic hand mechatronic design and its chess-playing experimentHuang, M.-B.; Huang, H.-P.; HAN-PANG HUANG IEEE Access
7222019自駕車商業化的挑戰李綱 電腦與通訊
7232019國際車輛自動駕駛技術發展李綱 土木水利
7242019Novel Neighborhood Blanker Processing of Radar Signals for Enhanced Delay-Doppler ResolutionLin I.-F.; Bell M.R.; I-FAN LIN Conference Record - Asilomar Conference on Signals, Systems and Computers
7252019A singularity handling algorithm based on operational space control for six-degree-of-freedom anthropomorphic manipulatorsKang, Z.-H.; Cheng, C.-A.; Huang, H.-P.; HAN-PANG HUANG International Journal of Advanced Robotic Systems
7262019Diffusioosmotic micropolar liquid flows in parallel plate microchannels subject to boundary slipHuang, H.-F.; Huang, K.-H.; HSIN-FU HUANG Meccanica
7272019Robot intelligent grasp of unknown objects based on multi-sensor informationJi, S.-Q.; Huang, M.-B.; Huang, H.-P.; HAN-PANG HUANG Sensors (Switzerland)
7282019Automated Grasp Planning and Path Planning for a Robot Hand-Arm SystemLiu, Y.-R.; Huang, M.-B.; Huang, H.-P.; HAN-PANG HUANG 2019 IEEE/SICE International Symposium on System Integration
7292019Design and Testing of a New Vascular Stent with Enhanced Fatigue LifeHo, K.-L.; Hung, M.-Y.; Chen, J.-H.; Jian, Y.-M.; Hsiao, H.-M.; HAO-MING HSIAO IOP Conference Series: Materials Science and Engineering
7302019A single-connector stent antenna for intravascular monitoring applicationsLiu, C.-H.; Chen, S.-C.; Hsiao, H.-M.; HAO-MING HSIAO ; CHIEN-HAO LIU Sensors (Switzerland)
7312019A real-time optimal energy-saving walking pattern generator based on gradient descent method and linear quadratic controlHsu, H.-K.; Huang, H.-P.; Huang, M.-B.; HAN-PANG HUANG Advanced Robotics
7322019Using a Robotic Neck Brace for Movement Training of the Head-NeckZhang H.; Chang B.-C.; Agrawal S.K.; BIING-CHWEN CHANG IEEE Robotics and Automation Letters
7332018A U-shaped multi-modal bi-directional piezoelectric energy harvesterWEI-JIUN SU ; Shih, Hsuan AnApplied Physics Letters2828
7342018Identifying joint clearance via robot manipulationLi K.; Tsai, Y.C.; Chan K. Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science88
7352018Forming three-dimensional closed shapes from two-dimensional soft ribbons by controlled bucklingJIA-YANG JUANG; JIA-YANG JUANG Royal Society Open Science
7362018An adjustable modular continuous liquid-liquid extraction (MCLLE) micro-device with 3D coaxial flowChang, Yu Lung; Yu, Zheng Xin; YA-YU CHIANG 22nd International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 20180
7372018An energy free passive pumping system for microfluidic deviceChuang, Chen Han; Wu, Lu Wei; Cheng, Zhi Hao; YA-YU CHIANG 22nd International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 20180
7382018Experimental and theoretical study of a dual-beam piezoelectric energy harvester with misaligned magnetsWEI-JIUN SU ASME 2018 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 201800
7392018A low-cost wrinkled texture process for mammalian cell alignment applicationsJiang, Bing Cheng; YA-YU CHIANG 22nd International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 20180
7402018Five-axis extrusion-based additive manufacturing of silicone 3D contour nonwoven fabricsDIAN-RU LI ; Tian, Xiaoqing; Wang, Hongjun; Plott, Jeffrey; Shih, AlbertASME 2018 13th International Manufacturing Science and Engineering Conference, MSEC 201830
7412018Effect of Osmotic Pressure on Cellular Stiffness as Evaluated Through Force Mapping MeasurementsHSIEN-SHUN LIAO ; Wen, PJ; Wu, LG; Jin, AJJournal of Biomechanical Engineering66
7422018Novel boundary edge detection for accurate 3d surface profilometry using digital image correlationChen, L.-C.; LIANG-CHIA CHEN Applied Sciences (Switzerland)33
7432018Employing tricyclic fusion method to splice a silicon cored fiber with a single mode fiberHsu Y.-L; Nian J.-R; Tsai Y.-Y; YAO-YANG TSAI ; LON A. WANG Optics InfoBase Conference Papers00
7442018Photo-controllable contact angle hysteresis on an artificial Azo-IPN petalWeng, C.-H.; Lin, C.-C.; Tsai, F.-C.; Dai, C.-A.; Yang, F.-L.; Shih, W.-P.; CHI-AN DAI ; FU-LING YANG ; PEI-ZEN CHANG Materials Letters33
7452018Quantitative differential phase contrast imaging at high resolution with radially asymmetric illuminationLin, Y.-Z.; KUANG-YUH HUANG ; YUAN LUO Optics Letters2019
7462018Isotropic quantitative differential phase contrast microscopic imagingLin, Y.-Z.; Chen, H.-H.; KUANG-YUH HUANG ; YUAN LUO Proceedings of SPIE - The International Society for Optical Engineering20
7472018Geometric parameter identification of a dual-arm robot by using closed-chain constraint and optimization techniqueYang W.-T; Li K.-L; Chan K.-Y; PEI-CHUN LIN ; KUEI-YUAN CHAN ; Chan K. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science54
7482018A novel method for quantitative height measurement based on an astigmatic optical profilometerHSIEN-SHUN LIAO ; GUAN-TARN HUANG ; Tu, HD; Lin, TH; Hwu, ETMeasurement Science and Technology66
7492018Development of the miniaturization lighting dose sensor for multi-wavelength light systemTsai, H.-Y.; Lin, Y.-C.; Hung, M.-W.; Huang, K.-C.; Yang, Y.-J.; YAO-JOE YANG ; YI-CHENG LIN 2018 IEEE International Instrumentation and Measurement Technology Conference: Discovering New Horizons in Instrumentation and Measurement10
7502018A mandibular advancement device embedded with polymer-based tunneling piezoresistive pressure sensing arrayChen, Y.-T.; Yeh, C.-C.; Chen, S.-H.; Xu, M.-X.; Tan, F.; ALEX YUNN-JY CHEN ; YAO-JOE YANG Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)10
7512018The suppression effect of easy-to-activate nucleation sites on the critical heat flux in pool boilingMING-CHANG LU ; Liu Y.; Lu M.-C.; Xu D.International Journal of Thermal Sciences1918
7522018Lifetime Distribution and Reliability Analysis of High-Power LED Assembly of Street Light Under Thermal EnvironmentsHsu Y.; Wang C.-H.; Wu W.-F. International Journal of Reliability, Quality and Safety Engineering10
7532018Resonance mode and sound pressure produced by circular diaphragms of electrostatic and piezoelectric speakersChiang, H.-Y.; YU-HSI HUANG Applied Acoustics1614
7542018Probabilistic safety assessment of BWR shroud-support weldments with multiple through-wall cracksLin S.-R.; Wu W.-F. ; Wu S.-Y.; Yu J.-S.International Journal of Pressure Vessels and Piping11
7552018A Software Defined-Based Hybrid Cloud for Smart ManufacturingTsung, C.K.; Yen, C.T.; Wu, W.F. Microsystem Technologies53
7562018Tongue pressure sensing array integrated with a system-on-chip embedded in a mandibular advancement splintChen, Y.-T.; Yeh, K.-Y.; Chen, S.-H.; Wang, C.-Y.; Yeh, C.-C.; Xu, M.-X.; Lu, S.-S.; ALEX YUNN-JY CHEN ; YAO-JOE YANG Micromachines54
7572018Experimental study of active vibration control for suppressing impact or moving disturbance-induced vibrations with polyvinylidene fluoride and fiber Bragg grating sensorsWang, HC; Chuang, KC; CHIEN-CHING MA Sensors and Actuators, A: Physical55
7582018Online Open-Phase Fault Detection for Permanent Magnet Machines With Low Fault Harmonic MagnitudesYang, S.-C.; Hsu, Y.-L.; Chou, P.-H.; Chen, G.-R.; Jian, D.-R.; SHIH-CHIN YANG IEEE Transactions on Industrial Electronics
7592018Vibration and Acoustic Characteristics of Piezoelectric RingYu-Hsi Huang; Song-Yi Syu; YU-HSI HUANG 4th Association of Computational Mechanics Taiwan Conference (ACMT)
7602018Dynamic motion generation in a hexapod robot using fixed-point trajectories of a simple model with period scalingLu, W.-C.; Lin, P.-C.; PEI-CHUN LIN IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM
7612018Dynamic modeling analysis of a spider monkey robotKuo, C.-T.; Li, W.-Y.; Wang, Y.-H.; Lin, P.-C.; PEI-CHUN LIN International Conference on Advanced Robotics and Intelligent Systems
7622018Tactile perception effects of shear force feedback and vibrotactile feedback on virtual texture representationsLin, C. W.; Smith, S.; SHANA SMITH AsiaHaptics 2018
7632018Fabrication and applications of ultraflexible nanostructures using dielectric heating-assisted nanoimprint on PVC filmsWu, T.-Y.; Tsai, P.-C.; Lo, S.-C.; Li, Y.-R.; Lee, K.-L.; Yang, S.-Y.; Wei, P.-K.; SEN-YEU YANG Current Applied Physics
7642018Thermal hysteresis in phase-change materials: Encapsulated metal alloy core-shell microparticlesMING-CHANG LU ; Hsu T.-H.; Chung C.-H.; Chung F.-J.; Chang C.-C.; Lu M.-C.; Chueh Y.-L.Nano Energy3432
7652018Development of an UV rolling system for fabrication of micro/nano structure on polymeric films using a gas-roller-sustained seamless PDMS moldLee, Y.-H.; Ke, K.-C.; Chang, N.-W.; Yang, S.-Y.; SEN-YEU YANG Microsystem Technologies
7662018The development of a gibbon-inspired brachiation robotY. H. Liu; P. K. Chen; K. C. Lu; L. Chin; P. C. Lin; PEI-CHUN LIN International Conference on Advanced Robotics and Intelligent Systems (ARIS)
7672018Robust Loop-Shaping Control Design and Implementation for an Automatic Neuro-Developmental-Treatment DeviceWang F.-C. ; Lin Y.-Y.; Yu C.-H.2018 European Control Conference40
7682018Highly-sensitive linear tactile array for continuously monitoring blood pulse wavesHuang, K.-H.; Chang, C.-M.; Lee, F.-W.; TZUNG-DAU WANG ; YAO-JOE YANG Sensors and Actuators, A: Physical108
7692018Medical Mechatronics for HealthcareLiu Y.-H; Moratal D; Escudero J; Huang H.-P.; HAN-PANG HUANG Journal of healthcare engineering21
7702018Transmission errors and backlash analysis of a single–stage cycloidal drive using tooth contact analysisShih Y.-P.; Sheen B.-T.; Wu K.-Y.; Lee J.-J. ASME Design Engineering Technical Conference10
7712018Effect of ambient air flow on resistivity uniformity of transparent Ga-doped ZnO film deposited by atmospheric pressure plasma jetJuang, J.-Y.; Lin, H.-T.; Liang, C.-T.; Li, P.-R.; Chen, W.-K.; Chen, Y.-Y.; JIA-YANG JUANG ; KUO-LONG PAN Journal of Alloys and Compounds109
7722018An experimental study of plastic heat exchangers applicable for dehumidificationMING-CHANG LU ; Amer M.; Chen M.-R.; Lu M.-C.; Wang C.-C.International Heat Transfer Conference1
7732018Theoretical Study of A Three-Swing Blades Rotary EngineMa H.K; Liu N.T; Hsu M.H; Liu Y.W; Lin C.Y.; CHUN-YEON LIN IOP Conference Series: Materials Science and Engineering00
7742018Distributed parameter element method for design analysis of electrical muscle stimulationLin, C.-Y.; Lee, K.-M.; Li, J.; Bai, K.; CHUN-YEON LIN IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM10
7752018Novel interpolation design for five-axis tool center point path generationTsai M.-S. ; Tang P.-Y.; Wu Y.-C.; Ho C.-K.IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM00
7762018Robust feedrate control for high-efficiency machining using quantitative feedback theoryHuang H.-W.; Tsai M.-S. Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an11
7772018Vibration Suppression of Milling Machine Tools by the InerterFu-Cheng Wang ; Chung-Hao Lee23rd International Symposium on Mathematical Theory of Networks and Systems
7782018Erratum: Publisher's Note: Relaxation-type nonlocal inertial-number rheology for dry granular flows [Phys. Rev. E 96, 062909 (2017) (Physical review. E (2017) 96 6-1 (062909))Lee, K.-L.; Yang, F.-L.; FU-LING YANG Physical Review E00
7792018Tracking research performance before and after receiving the Cheung Kong Scholars award: A case study of recipients in 2005Liu, X.; Yu, M.; Chen, D.-Z. ; Huang, M.-H. Research Evaluation22
7802018Kinematic error analysis and tolerance allocation of cycloidal gear reducersLin K.-S.; Chan K.-Y.; Chan K. Mechanism and Machine Theory6655
7812018Pyramid solar micro-gridHuang, B.-J.; Hsu, P.-C.; Wang, Y.-H.; Tang, T.-C.; Wang, J.-W.; Dong, X.-H.; Hsu, H.-Y.; Li, K.; Kang LI ; KUNG-YEN LEE ; Huang B.-J. IOP Conference Series: Earth and Environmental Science20
7822018Elongated Bouncing and Reduced Contact Time of a Drop in the Janus StateMING-CHANG LU ; Sahoo V.; Chou C.-Y.; Lo C.-W.; Lu M.-C.Langmuir88
7832018Design of one DOF closed-loop statically balanced planar linkage with link-collinear spring arrangementJhuang, C.-S.; Kao, Y.-Y.; Chen, D.-Z.; DAR-ZEN CHEN Mechanism and Machine Theory66
7842018Switching Control of a Long-Stroke Precision Stage based on Model PredictionFu-Cheng Wang ; Yi-Kai PengThe 2018 International Conference on Innovation, Communication and Engineering
7852018Optically-induced-dielectrophoresis (ODEP)-based cell manipulation in a microfluidic system for high-purity isolation of integral circulating tumor cell (CTC) clusters based on their size characteristicsChiu, T.-K.; Chao, A.-C.; Chou, W.-P.; Liao, C.-J.; Wang, H.-M.; Chang, J.-H.; Chen, P.-H.; Wu, M.-H.; PING-HEI CHEN Sensors and Actuators, B: Chemical
7862018Dual Sensing Arrays for Surface Plasmon Resonance (SPR) and Surface-Enhanced Raman Scattering (SERS) Based on Nanowire/Nanorod Hybrid NanostructuresLee, K.-L.; Hung, C.-Y.; Pan, M.-Y.; Wu, T.-Y.; Yang, S.-Y.; Wei, P.-K.; SEN-YEU YANG Advanced Materials Interfaces
7872018Fabrication of biomimetic dry-adhesion structures through nanosphere lithographyKuo, P. C.; Chang, N. W.; Suen, Y.; Yang, S. Y.; SEN-YEU YANG Applied Physics a-Materials Science & Processing1
7882018Wearable sensors developed using a novel plastic metal materialShih, J.-F.; Yang, S.-Y.; Chang, C.-C.; Yang, C.-R.; SEN-YEU YANG Applied Physics A: Materials Science and Processing
7892018自動駕駛技術李綱; KANG LI 
7902018Design of active tire anti-skid control strategy integrating lane-keeping control system for autonomous vehiclesWu M.X.; Jeng L.W.; Li K.; KANG LI The Dynamics of Vehicles on Roads and Tracks
7912018Modeling and elastic deformation compensation of flexural feed drive systemHuang H.-W.; Tsai M.-S. ; Huang Y.-C.International Journal of Machine Tools and Manufacture2523
7922018Enhanced immersion cooling using two-tier micro- and nano-structuresMING-CHANG LU ; Hsu Y.-T.; Li J.-X.; Lu M.-C.Applied Thermal Engineering1817
7932018A study on the crystallization behavior of amorphous Ti50Ni25Cu25 shape memory ribbon by X-ray diffraction measurementChen C.-H. ; Wang H.-K.Intermetallics99
7942018A study on localized expansion defects in tube hydroformingLin, S.-L.; Chen, Z.-W.; Chen, F.-K.; FUH-KUO CHEN Journal of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an64
7952018An Online Tool Temperature Monitoring Method Based on Physics-Guided Infrared Image Features and Artificial Neural Network for Dry CuttingLee, K.-M.; Huang, Y.; Ji, J.; Lin, C.-Y.; CHUN-YEON LIN IEEE Transactions on Automation Science and Engineering2016
7962018Preparation and mechanical properties of in-situ synthesized nano-MgAl2O4 particles and MgxAl(1-x)B2 whiskers co-reinforced Al matrix compositesWang, Fucheng; Li, Jiajun; Shi, Chunsheng; Zhao, Naiqin; Liu, Enzuo; He, Chunnian; He, Fang; FU-CHENG WANG Materials Science and Engineering: A1210
7972018A Fiber Bragg Grating-Based Thin-Film Sensor for Measuring Dynamic Water PressureKo, PL; Chuang, KC; CHIEN-CHING MA IEEE Sensors Journal1311
7982018A software defined-based hybrid cloud for the design of smart micro-manufacturing systemTsung C.-K.; Yen C.-T.; Wu W.-F. Microsystem Technologies53
7992018A Study of the Debris Exclusion for Various Cross-section Electrodes in Linear Motor Equipped Deep Cavity EDM ProcessLiao, Y.S.; Liang, F.Y.; YAO-YANG TSAI ; YUNN-SHIUAN LIAO Procedia CIRP20
8002018Removing Redundant Data in Software-Defined Hybrid Cloud for Smart ManufacturingYen, C.T.; Tsung, C.K.; Wu, W.F. 4th IEEE International Conference on Applied System Innovation
8012018Role of easy-to-activate nucleation sites in pool boilingMING-CHANG LU ; Liu Y.; Lu M.-C.; Xu D.International Heat Transfer Conference1
8022018In situ synthesis of a gamma-Al2O3 whisker reinforced aluminium matrix composite by cold pressing and sinteringQu, Xiaoyao; Wang, Fucheng; Shi, Chunsheng; Zhao, Naiqin; Liu, Enzuo; He, Chunnian; He, Fang; FU-CHENG WANG Materials Science and Engineering: A4738
8032018Synthesis, characterization and application of superhydrophobic low-cost Cu and Al nanoparticlesAnbarasan, R.; Palanikumar, S.; Devi, A. Anitha; PING-HEI CHEN ; KUO-LUN TUNG International Nano Letters00
8042018Novel Interpolation Design using Corner Smoothing Technique for Five-Axis Tool Center Point Path GenerationWu, Y. C; M. S. Tsai ; P. Y. Tang; C. K. HoIEEE/ASME International Conference on Advanced Intelligent Mechatronics
8052018Effect of the Temperature Dependence of Transmissivity on the Thermal Boundary Conductance Between Two Dissimilar SolidsHuang M.-J. Journal of Electronic Materials00
8062018The optimization of hybrid power systems with renewable energy and hydrogen generationWang F.-C. ; Hsiao Y.-S.; Yang Y.-Z.Energies2417
8072018Simulation and design of a scramjet combustor enhanced by a porous cylinder burnerCheng, Y.-C.; Pan, K.-L.; KUO-LONG PAN AIAA Aerospace Sciences Meeting, 2018
8082018Water removal in a multi-U-shape microchannel and application in a PEM fuel cellLin T.-Y; Liu Y.-H; Pan K.-L; Sun K.K.-E.; KUO-LONG PAN 22nd International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2018
8092018Corrigendum to “Dose-related ethanol intake, Cx43 and Nav1.5 remodeling: Exploring insights of altered ventricular conduction and QRS fragmentation in excessive alcohol users” [J. Mol. Cell. Cardiol. 114 (2018) 150–160](S0022282817303358)(10.1016/j.yjmcc.2017.10.011)Hung, C.-L.; Lai, Y.-J.; Chi, P.-C.; Chen, L.-C.; Tseng, Y.-M.; Kuo, J.-Y.; Lin, C.-I.; Chen, Y.-C.; Lin, S.-J.; Yeh, H.-I.; LIANG-CHIA CHEN Journal of Molecular and Cellular Cardiology
8102018Vibration measurement and suppression for laser galvanometers using a micro-electromechanical system-based accelerometerChou, P.-H.; Hsu, Y.-L.; Yang, S.-C.; Chang, H.-C.; Kuo, Y.-C.; Chiu, L.-F.; Chen, Y.-T.; SHIH-CHIN YANG Sensors and Materials
8112018A Novel Feature Detection Method Using Multi-Dimensional Image Fusion for Automated Optical Inspection on Critical Dimension [適用於關鍵尺寸自動光學檢測的創新多維融合圖像特徵偵測方法]Chen L.-C; Liang C.-W; Hoang D.-C; Duong D.-H; Chen C.-S; Lin S.-T.; LIANG-CHIA CHEN Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao
8122018A Parylene-based Passive Wireless Pressure Sensor for Biomedical ApplicationsS.-H. Lo; C.-C. Yeh; M.-X. Xu; Z.-W. Lin; H.-Y. Chen; Y.-J. Yang; YAO-JOE YANG 15th International Conference on Automation Technology
8132018Integration of Capture Based Phase Voltage Measurement for Surface Permanent Magnet Machine Position Sensorless DriveChen, G.-R.; Yang, S.-C.; Hsu, Y.-L.; SHIH-CHIN YANG 2018 IEEE Energy Conversion Congress and Exposition
8142018A systematic review of technologies involving eco-innovation for enterprises moving towards sustainabilityKuo, T.-C.; Smith, S.; SHANA SMITH Journal of Cleaner Production
8152018Tolerant design and electromagnetic response of permanent magnet machine with stator turn faultHsu, C.-C.; Yang, S.-C.; SHIH-CHIN YANG 44th Annual Conference of the IEEE Industrial Electronics Society
8162018Power Dispatching Control of Pyramid Solar Micro-GridZ.-M. Dong; H.-Y. Hsu; B.-J. Huang; M.-H. Wu; W.-H. Wu; P.-C. Hsu; K. Li; K.-Y. Lee; KANG LI International Journal of Smart Grid and Clean Energy
8172018Fabrication of a Flexible Wireless Pressure SensorC.-C. Yeh; Y.-J. Yang; YAO-JOE YANG 44th International Micro & Nano Engineering Conference
8182018Fault-tolerant control of a novel powered wheelchair driven by rim motors with hall effect sensorsShih, H.-Y.; Yang, Y.-P.; YEE-PIEN YANG IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM
8192018Micromachined planar supercapacitor with interdigital buckypaper electrodesChen, Y.-T.; Ma, C.-W.; Chang, C.-M.; Yang, Y.-J.; YAO-JOE YANG Micromachines
8202018New eSLIP model and design of a cockroach-like hexapodJ. R. Chiu; Y. C. Huang; H. C. Chen; P. C. Lin; PEI-CHUN LIN International Conference on Advanced Robotics and Intelligent Systems (ARIS)
8212018Model-based development of the flip-and-jump gait of a hexapod robotS. L. Hsu; K. W. Liu; S. Y. Chen; C. H. Hsiung; P. C. Lin; PEI-CHUN LIN International Conference on Advanced Robotics and Intelligent Systems (ARIS)
8222018A hybrid control strategy for dual-arm object manipulation using fused force/position errors and iterative learningChen, B.-H.; Wang, Y.-H.; Lin, P.-C.; PEI-CHUN LIN IEEE/ASME International Conference on Advanced Intelligent Mechatronics
8232018Sensorless Harmonic Estimation for Servo Drive with Vibration LoadHuang, C.-L.; Yang, S.-C.; Hsu, Y.-L.; SHIH-CHIN YANG 2018 IEEE Energy Conversion Congress and Exposition
8242018A Tactile Feedback Glove for Reproducing Realistic Surface Roughness and Continual Lateral Stroking PerceptionLin, P.-H.; Smith, S.; SHANA SMITH Lecture Notes in Computer Science
8252018Design and implementation of a spider monkey robotLi, W.-Y.; Wang, Y.-H.; Kuo, C.-T.; Lin, P.-C.; PEI-CHUN LIN International Conference on Advanced Robotics and Intelligent Systems
8262018EMF-based position sensorless drive with the instantaneous phase voltage measurementG.-R. Chen; S.-C. Yang; Y.-L. Hsu; SHIH-CHIN YANG the 10th Annual 2018 IEEE Energy Conversion Congress and Exposition (ECCE)
8272018Permanent magnet machine position sensorless drive at low speed with phase voltage measurementYang, S.-C.; Chen, G.-R.; Tu, K.-H.; SHIH-CHIN YANG 44th Annual Conference of the IEEE Industrial Electronics Society
8282018Permanet Magnet Machine Electromagnetic Response and Tolerant Design to Stator Turn FaultC.-C. Hsu; S.-C. Yang; SHIH-CHIN YANG IECON 2018 - 44st Annual Conference of the IEEE Industrial Electronics Society
8292018Three-Dimensional Vibration Characteristics of Piezoelectric Semi-Spherical ShellYu-Hsi Huang; Yin-Der Tsai; YU-HSI HUANG 20th International Conference on Vibration Problems and Mechanical Engineering
8302018Overconstrained mechanisms derived from RPRP loopsHsu, K.-L.; Ting, K.-L.; KUAN-LUN HSU Journal of Mechanical Design
8312018Research on Autonomous Vehicle Localization and Navigation System for Functional Safety RequirementsYu-Shen Tsai; Hsiang-Wen Hou; Kang Li; KANG LI 2018 International Conference on Unmanned System Applications - Agriculture, Ecosystem and the Environment (2018 ICUSA-AEE)
8322018Over-constrained mechanisms derived from RPRP loopsTing, K.-L.; Hsu, K.-L.; KUAN-LUN HSU ASME Design Engineering Technical Conference
8332018"Confocal microscopy for surface profilometry" Book chapter, Metrology, SpringerLiang-Chia Chen; LIANG-CHIA CHEN 
8342018具對稱雙凹面的平移式從動件之盤形凸輪機構的設計徐冠倫; 石施?; KUAN-LUN HSU 第21屆全國機構與機器原理學術研討會
8352018Sensorless Harmonic Estimation for Servo Drive System with Vibrational LoadC.-L. Huang; S.-C. Yang; Y.-L. Hsu; SHIH-CHIN YANG the 10th Annual 2018 IEEE Energy Conversion Congress and Exposition (ECCE)
8362018Thermal-fluid and electromagnetic coupling analysis and test of a traction motor for electric vehiclesChang, H.-Y.H.; Yang, Y.-P.; Lin, F.K.-T.; YEE-PIEN YANG Journal of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an
8372018The investigation of the two-phase thermosyphon performance limitChang, C.-C.; Huang, Z.-L.; Chiang, Y.-C.; Chen, S.-L.; SIH-LI CHEN Journal of Marine Science and Technology
8382018Performance investigation of regenerative total heat exchanger with periodic flowChang, C.-C.; Liang, J.-D.; Chen, S.-L.; SIH-LI CHEN Applied Thermal Engineering
8392018Geometrical parameters analysis of improved circulating inclined fluidized beds for general HVAC duct systemsLiang, J.-D.; Hsu, C.-Y.; Hung, T.-C.; Chiang, Y.-C.; Chen, S.-L.; SIH-LI CHEN Applied Energy
8402018A study on the effect of autonomous vehicle penetration rate in urban mix-fleet trafficChun-Ting Lin; Kuei-Yuan Chan; KUEI-YUAN CHAN 第 21 屆全國機構與機器設計學術研討會
8412018Optimum design and simulation of a radial-inflow turbine for geothermal power generationWu, H.-Y.; Pan, K.-L.; KUO-LONG PAN Applied Thermal Engineering
8422018Over-Constrained Mechanisms Derived from RPRP LoopsKuan-Lun Hsu; Kwun-Lon Ting; KUAN-LUN HSU ASME Journal of Mechanical Design
8432018Parameter Identification and Optimal Design of Performance for Vertical Articulated Robot Manipulators under Transmission Uncertainty for Harmonic DrivesYing-Kuan Tsai; Kuei-Yuan Chan; KUEI-YUAN CHAN 第 21 屆全國機構與機器設計學術研討會
8442018Dose-related ethanol intake, Cx43 and Nav1.5 remodeling: Exploring insights of altered ventricular conduction and QRS fragmentation in excessive alcohol usersHung, C.-L.; Lai, Y.-J.; Chi, P.-C.; Chen, L.-C.; Tseng, Y.-M.; Kuo, J.-Y.; Lin, C.-I.; Chen, Y.-C.; Lin, S.-J.; Yeh, H.-I.; LIANG-CHIA CHEN Journal of Molecular and Cellular Cardiology
8452018Identification and Calibration of Complex Model Parameters with Multiple Performance DeviationsMin-Hsian Lee; Kuei-Yuan Chan; KUEI-YUAN CHAN 第 21 屆全國機構與機器設計學術研討會
8462018Geometrical parameters analysis of improved circulating inclined fluidized beds for general HVAC duct systemsJyun-De Liang; Chien-Yeh Hsu; Tai-Chih Hung; Yuan-Ching Chiang; Sih-Li Chen; SIH-LI CHEN Applied Energy
8472018Soli-Liquid Coupled Vibration Characteristics of Piezoelectric Disks under Compressive and Incompressible Inviscid FluidsChien-Yu Yen; Yu-Hsi Huang; Kai-Lin Jhuang; YU-HSI HUANG Sixth Asian Conference on Mechanics of Functional Materials and Structures (ACMFMS 2018)
8482018A cuffless wearable system for real-time cutaneous pressure monitoring with cloud computing assistanceYeh, K.-Y.; Lin, T.-H.; Hsieh, Y.-Y.; Chang, C.-M.; Yang, Y.-J.; Lu, S.-S.; YAO-JOE YANG 2018 International Symposium on VLSI Design, Automation and Test
8492018Multimodal suppression of vibration in smart flexible beam using piezoelectric electrode-based switching controlLin, C.-Y.; Huang, Y.-H.; Chen, W.-T.; YU-HSI HUANG Mechatronics
8502018Automatic sport activity classification using deep learning and wearable inertial sensorsY.-L. Hsu; S.-C. Yang; H.-C. Chang; S.-L. Lin; P.-H. Chou; Y.-J. Chiu; C.-C. Lin; H.-R. Lee; SHIH-CHIN YANG 4th IEEE International Conference on Applied System Innovation 2018 (IEEE ICASI 2018)
8512018Development of an inertial-sensing-based robotic arm control systemY.-L. Hsu; P.-H. Chou; H.-R. Lee; S.-C. Yang; H.-C. Chang; W.-L. Lee; G.-T. Chen; SHIH-CHIN YANG 4th IEEE International Conference on Applied System Innovation 2018 (IEEE ICASI 2018)
8522018Human Daily and Sport Activity Recognition Using a Wearable Inertial Sensor NetworkHsu, Y.-L.; Yang, S.-C.; Chang, H.-C.; Lai, H.-C.; SHIH-CHIN YANG IEEE Access
8532018Advantage of Permanent Magnet Machine Position Sensorless Drive with Phase Voltage MeasurementS.-C. Yang; G.-R. Chen; T.-K. Tu; SHIH-CHIN YANG IECON 2018 - 44st Annual Conference of the IEEE Industrial Electronics Society
8542018Advantages of Winding Fault Tolerant Capability on Permanent Magnet Machines with Two Neutral Points in Stator WindingsS.-C. Yang; Y.-L. Hsu; P.-H. Chou; C.-X. Liu; G.-R. Chen; K. Li; SHIH-CHIN YANG IEEE Transaction on Industry Applications
8552018Clock-Torqued Rolling SLIP Model and Its Application to Variable-Speed Running in a Hexapod RobotLu, W.-C.; Yu, M.-Y.; Lin, P.-C.; PEI-CHUN LIN IEEE Transactions on Robotics
8562018以AI探索複雜系統的動態運動生成與控制機制林沛群; PEI-CHUN LIN 智慧製造 AI台灣:科技部人工智慧製造系統研究中心 成果彙編(I)
8572018Experimental investigation on the effect of size and pitch of hydrophobic square patterns on the pool boiling heat transfer performance of cylindrical copper surfaceSujith Kumar, C.S.; Chang, Y.W.; Arenales, M.R.M.; Kuo, L.-S.; Chuang, Y.H.; Chen, P.-H.; PING-HEI CHEN Inventions
8582018A novel flexible heating element using graphene polymeric composite ink on polyimide filmKe, K.-C.; Cheng, C.; Lin, L.-J.; Yang, S.-Y.; SEN-YEU YANG Microsystem Technologies
8592018Elucidating the mechanisms behind the boiling heat transfer enhancement using nano-structured surface coatingsSujith Kumar, C.S.; Udaya Kumar, G.; Mata Arenales, M.R.; Hsu, C.-C.; Suresh, S.; Chen, P.-H.; PING-HEI CHEN Applied Thermal Engineering
8602018SLIP-Model-Based Dynamic Motion Transition between Different Fixed Points in One Stride in a Leg-Wheel Transformable RobotLin, H.-S.; Lin, Y.-M.; Lin, P.-C.; PEI-CHUN LIN IEEE International Conference on Intelligent Robots and Systems
8612018Design and implementation of a quadrupedal crawling-rolling robotChen, Y.-C.; Ma, S.-T.; Hsu, L.-Y.; Lin, Y.-C.; Lin, P.-C.; PEI-CHUN LIN International Conference on Advanced Robotics and Intelligent Systems
8622018Design and implementation of a dung beetle robotChen, J.; Wang, J.-W.; Hsu, H.-H.; Chiang, Y.-S.; Lin, P.-C.; PEI-CHUN LIN International Conference on Advanced Robotics and Intelligent Systems
8632018Missing links: Timing characteristics and their implications for capturing contemporaneous technological developmentsKuan, C.-H.; Huang, M.-H. ; Chen, D.-Z. Journal of Informetrics66
8642018Synthesis of Discontinuously Movable Mechanisms with BifurcationLo T.-C.; Yang T.-N.; Lee J.-J. 2018 International Conference on Reconfigurable Mechanisms and Robots00
8652018Fault Detection and Tolerant Capability of Parallel-Connected Permanent Magnet Machines under Stator Turn FaultYang S.-C.; Hsu Y.-L.; Chou P.-H.; Hsu C.-C.; Chen G.-R.; Kang LI ; SHIH-CHIN YANG IEEE Transactions on Industry Applications98
8662018Road safety analysis for high-speed vehicle in complex environments based on the viability kernelLiu, Lei; Gao, Yan; Wang, Fu-Cheng; FU-CHENG WANG IET Intelligent Transport Systems54
8672018Transformational and pseudoelastic characteristics of melt-spun Ti 50 Ni 25 Cu 25 shape memory ribbon crystallized and aged at a low temperatureChen C.-H. ; Wang, Hsin-Kai; SHYI-KAAN WU Journal of Alloys and Compounds
8682018Assessing patents based on their structural significance in patent citation networkKuan, C.-H.; Chen, D.-Z.; DAR-ZEN CHEN 2018 Portland International Conference on Management of Engineering and Technology: Managing Technological Entrepreneurship: The Engine for Economic Growth10
8692018Automatic controller switching by model-based predictive control for a PZT stagePeng Y.K.; Wang F.C. 2018 SICE International Symposium on Control Systems10
8702018濾波電容板之可靠度分析與設計改良李承鴻; 邱逸家; 吳文方 中華民國力學學會第四十二屆全國力學會議
8712018絕緣柵雙極電晶體在JEDEC熱循環標準下之疲勞壽命與可靠度評估陳建君; 陳昱宇; 吳文方 中華民國力學學會第四十二屆全國力學會議
8722018建構智慧機械聯網平台技術劉德葳; 蔡孟勳 ; 張宜彬; 王仁傑機械工業雜誌
8732018A new image processing algorithm for three-dimensional angular velocity measurement and its application in a granular avalancheLin, C.-C.; Yang, F.-L.; FU-LING YANG Advanced Powder Technology53
8742018風機系統之可靠度設計與評估林鈺衡; 陳冠霖; 陳俞凱; 吳文方 中華民國力學學會第四十二屆全國力學會議
8752018Preliminary Analysis of Wind Data in the Development of a Wind Farm in TaiwanChen, Y.K.; Hsu, Y.; Wu, W.F. 2018 Annual Conference on Engineering and Applied Science
8762018Distributed Current Source Method for Modeling Magnetic and Eddy-Current Fields Induced in Nonferrous Metallic ObjectsLin, C.-Y.; Lee, K.-M.; Hao, B.; CHUN-YEON LIN IEEE/ASME Transactions on Mechatronics2119
8772018Hydrodynamic coupling distance between a falling sphere and downstream wallLin, C.-C.; Huang, H.-T.; Yang, F.-L.; FU-LING YANG Coupled Systems Mechanics00
8782018Design optimization for the hybrid power system of a green buildingChen P.-J.; Wang F.-C. International Journal of Hydrogen Energy2218
8792018Imaging initial formation processes of nanobubbles at the graphite-water interface through high-speed atomic force microscopyHSIEN-SHUN LIAO ; Yang, CW; Ko, HC; Hwu, ET; Hwang, Ing-ShouhApplied Surface Science2220
8802018Cost-effective and channel-scalable hardware decoders for multiple electron-beam direct-write systemsYu, Chun-Chang; Lin, Pei-Chun; Lu, Yi-Chang; PEI-CHUN LIN ; CHUNG-PING CHEN Journal of Micro/Nanolithography, MEMS, and MOEMS00
8812018Micro-drawing of circular cups with thin stainless steel sheetsSu, H.-S.; Chen, F.-K.; Huang, K.-M.; FUH-KUO CHEN Materials Science Forum00
8822018Classifying Patents by Tracing the Chronology of Patent Citation IncrementsLin, M.-C.; Huang, M.-H. ; Chen, D.-Z. 2018 IEEE International Conference on Engineering, Technology and Innovation00
8832018Development of Novel Tool Center Point Velocity Planning Algorithm for Five Axis Machine ToolWu S.-K.; Tsai M.-S. ; Lin M.-T.; Huang H.-W.International Journal of Precision Engineering and Manufacturing1111
8842018A Difference Detection Mechanism between API Cache and Data Center in Smart ManufacturingYen, C.T.; Tsung, C.K.; Wu, W.F. 7th International Conference on Frontier Computing00
8852018Multiple-point Measurement for Mechanical Strain, Raising Temperature and Working Frequency of a High Speed Spindle using One Fiber Bragg Grating SensorChien-Ching Ma; Ching-Yuan Chang; Ruei-Cing Gong; CHIEN-CHING MA The 3rd International Conference on Precision Machinery and Manufacturing Technology
8862018Microelectromechanical based biocompatible artificial skin phantomsChien-Hao Liu; Yin-Chen Huang; Shang-Hsuan Li; Yen-An Chen; Wesley Z Wang; Jia-Shing Yu; Wen-Pin Shih; CHIEN-HAO LIU Micro & Nano Letters
8872018High-Order Deformation Theory for Flexural and Extensional Vibration Analysis of Thick PlateYi-Chuang Wu; CHIEN-CHING MA 18th U.S. National Congress for Theoretical and Applied Mechanics (USNC/TAM 2018)
8882018應用Mindlin 板理論與高階剪切形變理論解析固體耦合的振動特性吳亦莊; 馬劍清 中華民國力學學會第四十二屆全國力學會議
8892018Measurement of deformation of a shape memory alloy fiber during the austenitic and martensitic phase transformationChien-Ching Ma; Ching-Yuan Chang; Chin-Ying Chang; CHIEN-CHING MA 4th CIRP Conference on Surface Integrity
8902018Alleviating distortion and improving the young's modulus in two-photon polymerization fabricationsShin, C.-S.; Li, T.-J.; Lin, C.-L.; CHOW-SHING SHIN Micromachines
8912018Measurement of deformation for carbon fiber composite during tensile load using digital image correlation methodMa C.-C; Chang C.-Y.; CHIEN-CHING MA Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering
8922018A Liquid-Metal-Embedded Stretchable Frequency Selective Surfaces for Wide-Band TuningPo-Wen Lin; CHIEN-HAO LIU 2018 IEEE AP-S International Symposium on Antennas and Propagation and USNC/URSI National Radio Science Meeting
8932018加工特徵辨識技術於鑽孔加工之應用吳正傑; 蔡玉麟; 劉楊倫; 蔡曜陽 機械工業雜誌
8942018An online simultaneous measurement of the dual-axis straightness error for machine toolsJywe W.-Y.; Hsieh T.-H.; Chen P.-Y.; Wang M.-S.; Wen-Yuh Jywe Applied Sciences (Switzerland)
8952018Comparative evaluation of a permanent magnet machine saliency-based drive with sine-wave and square-wave voltage injectionChen, J.-Y.; Yang, S.-C.; Tu, K.-H.; SHIH-CHIN YANG Energies
8962018應用Mindlin理論解析與實驗量測壓電厚板三維耦合之動態特性吳亦莊; 馬劍清 2018中華民國航太學會學術研討會
8972018Using dielectrophoresis and electrorotation techniques to assess the dielectric properties of Scenedesmus Abundans at different growth statesYu-Sheng; Sung Tsang; Sakina Bensalem; Filipa Lopes; Chen-li Sun; Bruno Le Pioufle; Hsiang-Yu Wang; CHEN-LI SUN 22nd International Conference on Miniaturized Systems for Chemistry and Life Sciences
8982018Optimal design of an absorption chilled water storage air conditioning system driven by waste heatChih-Chung Chang; Jyun-De Liang; Yuan-Ching Chiang; Sih-Li Chen; SIH-LI CHEN Journal of the Chinese Institute of Engineers
8992018Utilization of waste heat for energy conservation in domestic dryersMa, S.-S.; Tseng, C.-Y.; Jian, Y.-R.; Yang, T.-H.; Chen, S.-L.; SIH-LI CHEN Energy
9002018Automatic calibration system for micro-displacement devicesShih H.-T.; Wang Y.-C.; Shyu L.-H.; Tung P.-C.; Chang C.-P.; Jywe W.-Y.; Chen J.-H.; Wen-Yuh Jywe Measurement Science and Technology
9012018Improving Machining Efficiency Methods of Micro EDM in Cold Plasma JetYan, C.; Zou, R.; Yu, Z.; Li, J.; Tsai, Y.; YAO-YANG TSAI Procedia CIRP
9022018Using microfluidic devices to study in-plane elasticities of the endothelial cells in different directions under flow shearingKo P.-L; Hsu H.-H; Lee T.-A; Wang C.-K; Liao W.-H; Tung Y.-C.; CHIEN-KAI WANG 22nd International Conference on Miniaturized Systems for Chemistry and Life Sciences, MicroTAS 2018
9032018Developing Biocompatible Iridium Oxide Electrodes for Bone-Guided Extra-Cochlear ImplantYung-Shan Lu; Chia-Fone Lee; CHIEN-HAO LIU ICBE 2018 : 20th International Conference on Biomedical Engineering
9042018主編前言楊燿州; 莊承鑫; 楊燿州 微系統暨奈米科技協會會刊
9052018400G DC交換器熱解決方案之研發王琮凱; 洪嘉吟; 張嘉良; 孫珍理 
9062018Force sensorless compliance control of a lower-limb exoskeleton robotKuo C.-H.; Yudha A.P.; Mohapatra S.K.; CHUNG-HSIEN KUO International Journal of Automation and Smart Technology
9072018Investigation on performance of building-integrated earth-air heat exchangerHsu, C.-Y.; Chiang, Y.-C.; Chien, Z.-J.; Chen, S.-L.; SIH-LI CHEN Energy and Buildings
9082018Optimal design of an absorption chilled water storage air conditioning system driven by waste heatChang, C.-C.; Liang, J.-D.; Chiang, Y.-C.; Chen, S.-L.; SIH-LI CHEN Journal of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an
9092018A tunable magnetic axis microdevice using polymer-dispersed liquid crystal doped with magnetic nanoparticlesYang, D.-C.J.; Cai, J.-M.; Yang, Y.-J.J.; YAO-JOE YANG Applied Physics Letters
9102018A Blood Pulse Sensing System with a Tension SensorC.-C. Yeh; Y.-J. Yang; YAO-JOE YANG 44th International Micro & Nano Engineering Conference
9112018Wireless stimulus-on-device design for novel P300 hybrid brain-computer interface applicationsKuo C.-H.; Chen H.-H.; Chou H.-C.; Chen P.-N.; Kuo Y.-C.; CHUNG-HSIEN KUO Computational Intelligence and Neuroscience
9122018薄板結構部分浸泡於流體中之流固耦合振動問題理論解析、數值計算與實驗量測陳冠瑋; 馬劍清 2018中華民國力學學會第四十二屆全國力學會議
9132018Resonance oscillations of the Soufri?re Hills Volcano (Montserrat, W.I.) magmatic system induced by forced magma flow from the reservoir into the upper plumbing dikeChin-Wu Chen; Hsin-Fu Huang; Stefanie Hautmann; I. Selwyn Sacks; Alan T. Linde; Taka'aki Taira; HSIN-FU HUANG Journal of Volcanology and Geothermal Research
9142018A spherical Leidenfrost droplet with rotation and translationZhi-Hao Wu; Wan-Hsin Chang; Chen-li Sun; CHEN-LI SUN International Journal of Thermal Sciences
9152018An evaluation of particle tracking algorithm applied in temperature measurement by Brownian motion of gold nanoparticlesJia-Yan Lee; Chen-li Sun; CHEN-LI SUN 19th International Symposium on the Application of Laser and Imaging Techniques to Fluid Mechanics
9162018PrefaceTsai C.-C.; Juang C.-F.; Kuo C.-H.; CHUNG-HSIEN KUO International Conference on Advanced Robotics and Intelligent Systems, ARIS
9172018應用實驗量測與Mindlin板理論解析壓電板之三維動態特性吳亦莊; 馬劍清 第十九屆非破壞檢測技術研討會
9182018A Novel Feature Detection Method Using Multi-Dimensional Image Fusion for Automated Optical Inspection on Critical Dimension陳亮嘉(Liang-Chia Chen); 梁景文(Ching-Wen Liang); 黃庭強(Dinh-Cuong Hoang); 楊德孝(Duc-Hieu Duong); 陳金聖(Chin-Sheng Chen); 林世聰(Shyh-Tsong Lin); 陳亮嘉 中國機械工程學刊
9192018逆向工程應用於飛航事故調查之研究陳子杰(Tsu-Chieh Chen); 袁瑋辰(Wei-Chen Yuan); 李貫銘(Kuan-Ming Li); 莊禮彰(Li-Chang Chuang); 王聖智(Sheng-Jhih Wang); 李貫銘 航空安全及管理季刊
9202018Systematic node management mechanism using ZigBee-based real-time vital sign information monitoring system to manage large numbers of patientsLin K.-F.; Lin S.-S.; Hung M.-H.; Kuo C.-H.; Chen P.-N.; CHUNG-HSIEN KUO Technology and health care : official journal of the European Society for Engineering and Medicine
9212018WORDS FROM THE DIRECTOR GENERAL楊燿州(Yao-Joe Yang); 楊燿州 儀科中心年報
9222018Mechanical Properties of an Fe-Based SAM2×5-630 Metallic Glass Matrix Composite with Tungsten Particle AdditionsCheng, I.-C.; Kelly, J.P.; Novitskaya, E.; Eliasson, V.; Hodge, A.M.; Graeve, O.A.; I-Chung Cheng Advanced Engineering Materials
9232018Resonance oscillations of the Soufri?re Hills Volcano (Montserrat, W.I.) magmatic system induced by forced magma flow from the reservoir into the upper plumbing dikeChen, C.-W.; Huang, H.-F.; Hautmann, S.; Sacks, I.S.; Linde, A.T.; Taira, T.; HSIN-FU HUANG Journal of Volcanology and Geothermal Research
9242018具揮發性帶電水滴於風場與電場中飛行軌跡的模擬與分析葉力赫; 黃信富; HSIN-FU HUANG 中華民國力學年會暨第四十二屆全國力學會議
9252018On the performance assessment of using alcohol/water mixtures in a solar Rankine cycle system with an evacuated tube collectorHsu, P.-Y.; Sun, C.-L.; CHEN-LI SUN AIP Conference Proceedings
9262018On the evaporative spray cooling with a self-rewetting fluid: Chasing the heatTsang, S.; Wu, Z.-H.; Lin, C.-H.; Sun, C.-L.; CHEN-LI SUN Applied Thermal Engineering
9272018Real-time control of a humanoid robotLai, W.-Z.; Huang, H.-P.; Chen, J.-H.; HAN-PANG HUANG International Conference on Advanced Robotics and Intelligent Systems
9282018One-step approach to fabricating polydimethylsiloxane microfluidic channels of different geometric sections by sequential wet etching processesWang C.-K.; Liao W.-H.; Wu H.-M.; CHIEN-KAI WANG ; HSIAO-MEI WU Journal of Visualized Experiments11
9292017Exploring Technology Evolution in the Solar Cell Field: An Aspect from Patent AnalysisDAR-ZEN CHEN ; Chou, Chien HsiangData and Information Management00
9302017The avian egg exhibits general allometric invariances in mechanical designJia-Yang Juang; Pin-Yi Chen; Da-Chang Yang; Shang-Ping Wu; An Yen; Hsin-I. Hsieh; JIA-YANG JUANG Scientific Reports
9312017Flow visualization of the inverse Marangoni convection with thermal imaging張嘉良; 王琮凱; 洪嘉吟; 黃加丹; 孫珍理 2017 CSVSA Forum
9322017An adjustable liquid-liquid microfluidic extraction deviceChang, Yu Lung; Chuang, Chen Han; YA-YU CHIANG 2017 IEEE 12th International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 201720
9332017Modeling and analyses of a connected multi-car train system employing the inerterChen, Hsueh Ju; WEI-JIUN SU ; FU-CHENG WANG Advances in Mechanical Engineering1311
9342017Failure mechanism of hollow tree trunks due to cross-sectional flatteningJIA-YANG JUANG; JIA-YANG JUANG Royal Society Open Science
9352017Efficiency loss of thin film Cu(InxGa1?x)Se(S) solar panels by lamination processLi Xu; LI XU Journal of Applied Physics
9362017Enhancement of Ga-doped zinc oxide film properties and deposition rate by multiple deposition using atmosphere pressure plasma jetYu-Yi Chen; Jia-Yang Juang; JIA-YANG JUANG Journal of Alloys and Compounds
9372017Improvement in the physical and psychological well-being of persons with spinal cord injuries by means of powered wheelchairs driven by dual power wheels and mobile technologiesYEE-PIEN YANG ; LI-JEN WENG ; YEI-YU YEH ; HUI-FEN MAO; RAY-I CHANG 21st World Multi-Conference on Systemics, Cybernetics and Informatics00
9382017Reducing uncertainty accumulation in wind-integrated electrical gridHung T.; Chong J.; Chan K. Energy77
9392017Optical Measurement of Tissue Deformation in Needle InsertionDIAN-RU LI ; Yeh, Jih Kai; Putra, Ketut; Shih, AlbertProcedia CIRP60
9402017An experimental method of needle deflection and prostate movement using the anatomically accurate prostate simulator and the electromagnetic tracking systemDIAN-RU LI ; Yeh, Jih Kai; Lin, Wei Chen; Montgomery, Jeffrey S.; Shih, AlbertASME 2017 12th International Manufacturing Science and Engineering Conference, MSEC 2017 collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing30
9412017Monitoring fatigue damage of an adhesive joint using fiber optics sensorsShin, C.S.; Yang, Y.J.; CHOW-SHING SHIN ; YAO-JOE YANG Journal of Physics: Conference Series30
9422017Application of thermoelectric generators to an exhausted cryogenic nitrogen system with an anti-frozen shielding containerMing-Chyuan Lin; Mei-Jiau Huang ; Chih-Hung Lo36th Annual International Conference on Thermoelectrics
9432017The development and control of a two-wheeled inverted pendulumWang Z.J.; Wang F.C. 2017 56th Annual Conference of the Society of Instrument and Control Engineers of Japan10
9442017Pool-boiling heat-transfer enhancement on cylindrical surfaces with hybrid wettable patternsKumar C. S.; S.; Chang, Y.W.; PING-HEI CHEN ; YAO-WEN CHANG Journal of Visualized Experiments1612
9452017Strong ties and weak ties of the knowledge spillover network in the semiconductor industryCHUN-CHIEH WANG ; Sung, Hui-Yun; DAR-ZEN CHEN ; MU-HSUAN HUANG Technological Forecasting and Social Change5449
9462017Effective-medium-approximation models for the thermal conductivities of nanocomposite materialsMei-Jiau Huang 2nd International Conference on New Energy and Future Energy Systems
9472017A Tool of Microstructure Analysis for Shape Memory AlloysNien-Ti Tsou; Chih-Hsuan Chen International Conference on Martensitic Transformations
9482017Real-time, energy-efficient traction allocation strategy for the compound electric propulsion systemLi K.; Chou F.-C.; JIA-YUSH YEN ; Kang LI IEEE/ASME Transactions on Mechatronics2521
9492017Effect of the temperature dependence of the transmissivity on the thermal boundary conductance between two dissimilar solidsMei-Jiau Huang 36th Annual International Conference on Thermoelectrics( July 30-Aug. 4, 2017, .) 
9502017An Investigation of The Effective Thermal Conductivity of Bismuth Telluride embedded periodically with Twin BoundariesChung-Ying Hwang; Mei-Jiau Huang 中國機械工程學會第三十四屆全國學術研討會
9512017The Development and Control of a Long-Stroke Precision StageKou-An Wang; Yi-Kai Peng; Fu-Cheng Wang* Smart Science30
9522017Single step sequential polydimethylsiloxane wet etching to fabricate a microfluidic channel with various cross-sectional geometriesWang C.-K.; Liao W.-H.; Wu H.-M.; Lo Y.-H.; Lin T.-R.; CHIEN-KAI WANG ; HSIAO-MEI WU Journal of Micromechanics and Microengineering22
9532017應用強健性進給率控制於高效率加工蔡孟勳 ; 黃泓緯; 麥朝創機械工業雜誌
9542017Robust feedrate control for high efficiency milling processHuang H.-W.; Tsai M.-S. ; Lin M.-T.; Hong M.-Q.; Huang T.-Y.; Yang S.-S.IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM10
9552017Position and speed estimation of permanent magnet machine sensorless drive at high speed using an improved phase-locked loopChen G.-R.; Yang S.-C.; Hsu Y.-L.; Kang LI ; SHIH-CHIN YANG Energies1716
9562017Increasing the computational efficient of digital cross correlation by a vectorization methodChang, CY; CHIEN-CHING MA Mechanical Systems and Signal Processing1111
9572017An Investigation of the Thermal boundary resistance associated with the Twin Boundary in Bismuth TellurideI-Ta Hsieh; Mei-Jiau Huang 中國機械工程學會第三十四屆全國學術研討會
9582017High-Speed Position-Sensorless Drive of Permanent-Magnet Machine Using Discrete-Time EMF EstimationYang, S.-C.; Chen, G.-R.; SHIH-CHIN YANG IEEE Transactions on Industrial Electronics
9592017Development of the vibration analysis and suppression technology for laser galvanometers based on inertial sensing technologyChen, W.-C.; Hsu, Y.-L.; Chou, P.-H.; Lee, H.-H.; Chang, H.-C.; Yang, S.-C.; Chen, C.-S.; SHIH-CHIN YANG 2017 SICE International Symposium on Control Systems
9602017Design of a High Starting Torque Single-Phase DC-Excited Flux Switching MachineYou, Z.-C.; Yang, S.-M.; Yu, C.-W.; Lee, Y.-H.; Yang, S.-C.; SHIH-CHIN YANG IEEE Transactions on Industrial Electronics
9612017Full Speed Region Sensorless Drive of Permanent-Magnet Machine Combining Saliency-Based and Back-EMF-Based DriveYang, S.-C.; Hsu, Y.-L.; SHIH-CHIN YANG IEEE Transactions on Industrial Electronics
9622017LEGO 設計林沛群; PEI-CHUN LIN 培育未來人才 T型人才工作坊
9632017Control of a 2-D bounding passive quadruped model with Poincar? map approximation and model predictive controlWang, A.S.-P.; Chen, W.W.-L.; Lin, P.-C.; PEI-CHUN LIN 2016 International Conference on Advanced Robotics and Intelligent Systems
9642017Dynamic Gait Generation for a Leg-wheel Transformable Robot Based on Force ControlY. M. Lin; T. H. Wang; P. C. Lin; PEI-CHUN LIN International Automatics Control Conference (CACS)
9652017Wind fields during the evening transition period and their influence on wind turbine loadsLu N.-Y.; Basu S.; Manuel L.; NAN-YOU LU 2017 Americas Conference on Wind Engineering, ACWE 2017
9662017動態足式機器人的運動機制林沛群; PEI-CHUN LIN 
9672017Application of graphene–polymer composite heaters in gas-assisted micro hot embossingCih Cheng; Kun-Cheng Ke; Sen-Yeu Yang; SEN-YEU YANG RSC Adv.
9682017Development of high-flexible triboelectric generators using plastic metal as electrodesYang, S.-Y.; Shih, J.-F.; Chang, C.-C.; Yang, C.-R.; SEN-YEU YANG Applied Physics A: Materials Science and Processing
9692017Special issue on Industry 4.0 FOREWORDYeau-Ren Jeng; Ping-Hei Chen; PING-HEI CHEN Journal of the Chinese Institute of Engineers
9702017Model-based design and evaluation of a brachiating monkey robot with an activewaistLo, A.K.-Y.; Yang, Y.-H.; Lin, T.-C.; Chu, C.-W.; Lin, P.-C.; PEI-CHUN LIN Applied Sciences (Switzerland)
9712017A DFFD simulation method combined with the spectral element method for solid?luid-interaction problemsChen L.-C.; Huang M.-J. Journal of Computational Physics11
9722017Investigations on Pseudo-binary TiZrHfNiCoCu High Entropy Shape Memory AlloysYue-Jin Chen; Chih-Hsuan Chen 
9732017Virtual simulation of five-axis machine tool with consideration of CNC interpolation, servo dynamics, friction, and geometric errorsLin M.-T.; Huang T.-Y.; Tsai M.-S. ; Wu S.-K.Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an31
9742017Integration of input shaping technique with interpolation for vibration suppression of servo-feed drive systemTsai M.-S. ; Huang Y.-C.; Lin M.-T.; Wu S.-K.Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an86
9752017Control of Ice FormationMING-CHANG LU ; Lo C.-W.; Sahoo V.; Lu M.-C.ACS Nano4745
9762017Compact arrangements of cable-pulley type zero-free-length springsOu, Y.-H.; Chen, D.-Z.; DAR-ZEN CHEN Journal of Mechanisms and Robotics54
9772017Optimization of unequal-active-and-passive-area piezoelectric unimorph cantilevers with collisions for ultra-thin keyboard designSmith, S.; Chao, C.-K.; JIA-YANG JUANG ; SHANA SMITH Journal of Vibroengineering00
9782017Low-cost camera based laser power monitoring and stabilizing for micro-hole drillingDing C.-F. ; Lee M.-S.; KUAN-MING LI International Journal of Precision Engineering and Manufacturing77
9792017Iterative optimization for a hybrid PEMFC power systemYang Y.Z.; Chen P.J.; Lin C.S.; Wang F.C. 2017 56th Annual Conference of the Society of Instrument and Control Engineers of Japan30
9802017Transformation Behaviors and Shape Memory Properties of Ti-rich TiNi Shape Memory RibbonsChih-Hsuan Chen ; Yen-Cheng Wang; Shyi-Kaan Wu; Yue-Jin ChenInternational Union of Material Research Society - International Conference in Asia
9812017A miniaturized nickel oxide thermistor via aerosol jet technologyWang C.; Hong G.-Y.; Li K.-M.; KUAN-MING LI ; HONG-TSU YOUNG Sensors (Switzerland)2620
9822017Relaxation-type nonlocal inertial-number rheology for dry granular flowsLee, K.-L.; Yang, F.-L.; FU-LING YANG Physical Review E1416
9832017Cyclic fatigue behavior of nickel–titanium dental rotary files in clinical simulated root canalsChi, C.-W.; Li, C.-C.; CHUN-PIN LIN ; CHOW-SHING SHIN Journal of the Formosan Medical Association106
9842017Reliability Analysis Based on Nonhomogeneous Continuous-Time Markov Modeling with Application to Repairable Pumps of a Power PlantHsu Y.; Wu W.F ; Huang T.W.International Journal of Reliability, Quality and Safety Engineering30
9852017How can academic innovation performance in university–industry collaboration be improved?Huang, M.-H. ; Chen, D.-Z. Technological Forecasting and Social Change8873
9862017Effect of heterogeneous wettable structures on pool boiling performance of cylindrical copper surfacesSujith Kumar, C.S.; Chang, Y.W. ; PING-HEI CHEN Applied Thermal Engineering6056
9872017Coupled Parametric Effects on Magnetic Fields of Eddy-Current Induced in Non-Ferrous Metal Plate for Simultaneous Estimation of Geometrical Parameters and Electrical ConductivityLee, K.-M.; Lin, C.-Y.; Hao, B.; Li, M.; CHUN-YEON LIN IEEE Transactions on Magnetics85
9882017Long-term Energy Generation Efficiency of Solar PV System for Self-consumptionHsu, P.-C.; Huang, B.-J. ; Wu, P.-H.; Wu, W.-H.; Lee, M.-J.; Yeh, J.-F.; Wang, Y.-H.; Tsai, J.-H.; Kang LI ; KUNG-YEN LEE Energy Procedia130
9892017Position sensing of permanent magnet machine position sensorless drive at high speed with low sample over rotor operating frequency ratioChen G.-R.; Yang S.-C.; Kang LI ; SHIH-CHIN YANG 2017 IEEE 3rd International Future Energy Electronics Conference and ECCE Asia10
9902017Fault detection and tolerant capability of parallel connected permanent magnet machines under stator turn faultYang S.-C.; Hsu Y.-L.; Chou P.-H.; Liu C.-X.; Chen G.-R.; Kang LI ; SHIH-CHIN YANG 2017 IEEE Energy Conversion Congress and Exposition10
9912017Solar power sharing between two PV systems in a solar pyramid micro-gridHsu, P.-C.; Huang, B.-J.; Wang, Y.-H.; Tang, T.-C.; Wang, J.-W.; Dong, X.-H.; Li, K.; Kang LI ; KUNG-YEN LEE ; Huang B.-J. International Journal of Smart Grid and Clean Energy60
9922017Design and Modeling of a Vertical Hopping RobotK. Y. Tseng; C. K. Lin; C. Y. Tsai; P. C. Lin; PEI-CHUN LIN International Automatics Control Conference (CACS)
9932017Development of radio-frequency heating-assisted nanoimprint with PETG solution for nanostructure-based biosensorsWu, T.-Y.; Hsu, H.-Y.; Lee, K.-L.; Yang, S.-Y.; Wei, P.-K.; SEN-YEU YANG AIP Advances
9942017Application of graphene-polymer composite heaters in gas-assisted micro hot embossingCheng, C.; Ke, K.-C.; Yang, S.-Y.; SEN-YEU YANG RSC Advances
9952017TurboQuad: A Novel Leg-Wheel Transformable Robot with Smooth and Fast Behavioral TransitionsChen, W.-H.; Lin, H.-S.; Lin, Y.-M.; Lin, P.-C.; PEI-CHUN LIN IEEE Transactions on Robotics
9962017Sensor data fusion for body-pitch estimation in a quadruped robotChen, W.W.-L.; Wang, S.-P.; Chen, Y.-H.; Tsai, C.-E.; Lin, P.-C.; PEI-CHUN LIN 2016 International Conference on Advanced Robotics and Intelligent Systems
9972017A switchable clutched parallel elasticity actuatorWu, W.-J.; Lin, P.-C.; PEI-CHUN LIN IEEE/ASME International Conference on Advanced Intelligent Mechatronics
9982017Boiling Heat Transfer Enhancement by Impurities Deposition in Tap WaterChin-Chi Hsu; Meng-Ru Lee; Chun-Hui Wu; Ping-Hei Chen; PING-HEI CHEN Experimental Thermal and Fluid Science
9992017SLIP-Model-Based Dynamic Gait Generation in a Leg-Wheel Transformable Robot with Force ControlLin, Y.-M.; Lin, H.-S.; Lin, P.-C.; PEI-CHUN LIN IEEE Robotics and Automation Letters
10002017A novel decision making technique at the intersection based on perception navigationWu M.-X.; Li K.; Chen P.-Y.; KANG LI 30th International Electric Vehicle Symposium and Exhibition