Results 1-222 of 222 (Search time: 0.013 seconds).

Issue DateTitleAuthor(s)SourcescopusWOSFulltext/Archive link
12024Replication of large-area microstructures by combining movable induction heating and roller hot embossingHung, Wei Cheng; Chiu, Chun Yang; He, Jyun Wei; Ke, Kun Cheng; SEN-YEU YANG Polymer Engineering and Science
22023Fabrication of wafer-level double-sided microlens array using injection compression moldingCheng, Ting Yu; Ke, Kun Cheng; SEN-YEU YANG Polymer Engineering and Science00
32023Induction heating of dual magnetic particles embedded PDMS molds for roller embossing applicationsHsu, Ming Huai; YAO-YANG TSAI ; He, Jyun Wei; SEN-YEU YANG Microsystem Technologies23
42023A double-sided PDMS mold for double-sided embossing by rollersHsu, Ming Huai; YAO-YANG TSAI ; He, Jyun Wei; SEN-YEU YANG Microsystem Technologies0
52023Fabrication of the low-residual-stress optical microstructure by using the simulation and practice strategies, in-mold induction heating system, and injection compression molding technologyHuang, Zhi Yu; Chiu, Chun Yang; Ke, Kun Cheng; SEN-YEU YANG Polymer Engineering and Science00
62022Induction heating ferromagnetic particles embedded PDMS mold for microstructure embossingHsu M.-H; YAO-YANG TSAI ; SEN-YEU YANG Journal of Physics Communications11
72020Hot embossing of microstructure with moving induction heating and gas-assisted pressuringKao, C.-C.; Ke, K.-C.; Hung, W.-C.; SEN-YEU YANG Microsystem Technologies55
82020Solution strengthening the Ti-6Al-4V joints were brazed by Ti-15Cu-15Ni and Ag-26.7Cu-4.5Ti filler foilsLee, K.-H.; Yang, S.-Y.; SEN-YEU YANG Materials Science Forum
92020Development of a novel low-temperature differential hollow roller using an ultra-thin heating element of graphene polymeric composite materialKe, K.-C.; Lin, L.-J.; Yang, S.-Y.; SEN-YEU YANG Microsystem Technologies1
102019Fabrication of a light-intensity-enhancement component by using computer-controlled ultraviolet curing and air-pressing imprintingChang, N.-W.; Ke, K.-C.; Yang, S.-Y.; SEN-YEU YANG Microsystem Technologies
112019Fabrication of large-area V-groove microstructures using gasbag-pressuring edge-irradiating UV imprintingHuang, Y.-Y.; Ke, K.-C.; Yang, S.-Y.; SEN-YEU YANG Microsystem Technologies
122019Fabrication of double-sided micro-lens array using UV injection moldingChen, X.-L.; Ke, K.-C.; Chang, N.-W.; Chen, Y.-H.; Yang, S.-Y.; SEN-YEU YANG International Polymer Processing
132018Fabrication and applications of ultraflexible nanostructures using dielectric heating-assisted nanoimprint on PVC filmsWu, T.-Y.; Tsai, P.-C.; Lo, S.-C.; Li, Y.-R.; Lee, K.-L.; Yang, S.-Y.; Wei, P.-K.; SEN-YEU YANG Current Applied Physics
142018Development of an UV rolling system for fabrication of micro/nano structure on polymeric films using a gas-roller-sustained seamless PDMS moldLee, Y.-H.; Ke, K.-C.; Chang, N.-W.; Yang, S.-Y.; SEN-YEU YANG Microsystem Technologies
152018Dual Sensing Arrays for Surface Plasmon Resonance (SPR) and Surface-Enhanced Raman Scattering (SERS) Based on Nanowire/Nanorod Hybrid NanostructuresLee, K.-L.; Hung, C.-Y.; Pan, M.-Y.; Wu, T.-Y.; Yang, S.-Y.; Wei, P.-K.; SEN-YEU YANG Advanced Materials Interfaces
162018Fabrication of biomimetic dry-adhesion structures through nanosphere lithographyKuo, P. C.; Chang, N. W.; Suen, Y.; Yang, S. Y.; SEN-YEU YANG Applied Physics a-Materials Science & Processing1
172018Wearable sensors developed using a novel plastic metal materialShih, J.-F.; Yang, S.-Y.; Chang, C.-C.; Yang, C.-R.; SEN-YEU YANG Applied Physics A: Materials Science and Processing
182018A novel flexible heating element using graphene polymeric composite ink on polyimide filmKe, K.-C.; Cheng, C.; Lin, L.-J.; Yang, S.-Y.; SEN-YEU YANG Microsystem Technologies
192017Application of graphene–polymer composite heaters in gas-assisted micro hot embossingCih Cheng; Kun-Cheng Ke; Sen-Yeu Yang; SEN-YEU YANG RSC Adv.
202017Development of high-flexible triboelectric generators using plastic metal as electrodesYang, S.-Y.; Shih, J.-F.; Chang, C.-C.; Yang, C.-R.; SEN-YEU YANG Applied Physics A: Materials Science and Processing
212017Development of radio-frequency heating-assisted nanoimprint with PETG solution for nanostructure-based biosensorsWu, T.-Y.; Hsu, H.-Y.; Lee, K.-L.; Yang, S.-Y.; Wei, P.-K.; SEN-YEU YANG AIP Advances
222017Application of graphene-polymer composite heaters in gas-assisted micro hot embossingCheng, C.; Ke, K.-C.; Yang, S.-Y.; SEN-YEU YANG RSC Advances
232017Low-cost and rapid fabrication of metallic nanostructures for sensitive biosensors using hot-embossing and dielectric-heating nanoimprint methodsLee, K.-L.; Wu, T.-Y.; Hsu, H.-Y.; Yang, S.-Y.; Wei, P.-K.; SEN-YEU YANG Sensors (Switzerland)
242017Imprinting of double-sided microstructures with rapid induction heating and gas-assisted pressuringShih, Y.-M.; Kao, C.-C.; Ke, K.-C.; Yang, S.-Y.; SEN-YEU YANG Journal of Micromechanics and Microengineering
252017Optimization of heat-treatment parameters in hardening of titanium alloy Ti-6Al-4V by using the Taguchi methodLee, K.-H.; Yang, S.-Y.; Yang, J.-G.; SEN-YEU YANG International Journal of Advanced Manufacturing Technology
262017Double-sided UV roller imprinting of microstructures on transparent platesChang, N.-W.; Yang, C.-H.; Yang, S.-Y.; SEN-YEU YANG Microsystem Technologies
272016Magnetic fluid microstructure curved surface uniform embossing and photocuring process technologyChen, R.-H.; Weng, Y.-J.; Yang, S.-Y.; SEN-YEU YANG Polymers for Advanced Technologies
282015Fabrication and application of nanostructures using gas-assisted hot embossing and self-assembled nanospheresHong, R.-H.; Cih, C.; Shu, T.-C.; Yang, S.-Y.; SEN-YEU YANG Key Engineering Materials
292015Hot-rolled embossing of microlens arrays with antireflective nanostructures on optical glassChen, P.-L.; Hong, R.-H.; Yang, S.-Y.; SEN-YEU YANG Journal of Micromechanics and Microengineering
302014Substrate effect on characteristics of PbZr<inf>x</inf>Ti <inf>1-x</inf>O<inf>3</inf> (PZT) filmCheng, C.-C.; Young, S.-L.; Chen, H.-Z.; Yang, S.-Y.; SEN-YEU YANG Integrated Ferroelectrics
312014Development of gasbag-assisted ultraviolet-based imprinting process for replication of microstructures onto cylindrical surfaceLin, C.-H.; Hong, R.-H.; Li, T.-H.; Yang, S.-Y.; SEN-YEU YANG Journal of Vacuum Science and Technology B:Nanotechnology and Microelectronics
322014Novel real-time temperature diagnosis of conventional hot-embossing process using an ultrasonic transducerCheng, C.-C.; Yang, S.-Y.; Lee, D.; SEN-YEU YANG Sensors (Switzerland)
332013Novel Real-time diagnosis of gas-assisted hot embossing process by ultrasoundChin-Chi Cheng; Chia-Lin Wu; Kuo-Ting Wu; Sen-Yeu Yang,; SEN-YEU YANG Polymer Engineering and Science
342013Development and discussion of asymmetric magnetic soft mode electromagnetic imprinting process technologyWeng, Y.-C.; Weng, Y.-J.; Yang, S.-Y.; SEN-YEU YANG Microsystem Technologies
352013Bubble-free replication of large area microstructures using gas-assisted UV embossing with modified reversal imprinting and gap-retained vacuumingHuang, Po-Hsun; Chen, Han-Ming; Huang, Tzu-Chien; Yang, Sen-Yeu; HAN-MING CHEN ; SEN-YEU YANG Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena11
362013CO<inf>2</inf>-assisted thermal fusion bonding of heterogeneous materials by use of surface nano-pillarsYao, T.-F.; Yang, S.-Y.; SEN-YEU YANG Microsystem Technologies
372013A high-brightness light guide plate with high precise double-sided microstructures fabricated using the fixed boundary hot embossing techniqueYang, C.-H.; Yang, S.-Y.; SEN-YEU YANG Journal of Micromechanics and Microengineering
382013CO2-assisted thermal fusion bonding of heterogeneous materials by use of surface nano-pillarsTsung-Fu Yao; Sen-Yeu Yang; SEN-YEU YANG Microsystem Technologies
392013Real-time diagnosis of gas-assisted hot embossing process by ultrasoundCheng, C.-C.; Wu, C.-L.; Wu, K.-T.; Yang, S.-Y.; SEN-YEU YANG Polymer Engineering and Science
402013Development of a non-uniform heating system for micro hot embossingYang, C.-H.; Yang, S.-Y.; SEN-YEU YANG International Polymer Processing
412013The application of elastic auxiliary air bag imprinting technology to the development of linear gradient micro-structure replication processesWeng, Y.-C.; Weng, Y.-J.; Yang, S.-Y.; SEN-YEU YANG Polymers for Advanced Technologies
422012Development of two step carbon dioxide assisted thermal fusion PMMA bonding processWu, Chia-Lin; Li, Chen-Chung; Lu, Chia-Fong; Yang, Sen-Yeu Microsystem Technologies33
432012A study on the application of electromagnetic-field-assisted magnetic soft mold photocuring imprinting technology in micro-structure gradient replication moldingWeng, Yung-Chun; Weng, Yung-Jin; Yang, Sen-Yeu Microelectronic Engineering43
442012Enhancing Surface Plasmon Detection Using Template-Stripped Gold Nanoslit Arrays on Plastic FilmsLee, Kuang-Li; Chen, Pei-Wen; Wu, Shu-Han; Huang, Jhih-Bin; Yang, Sen-Yeu ; Wei, Pei-KuenACS Nano140136
452012Application of an innovative process technology for phase shift mask in near-field phase shift lithographyHsu, H.-Y.; Weng, Y.-J.; Huang, J.-T.; Yang, S.-Y.; SEN-YEU YANG Advanced Science Letters
462011Electromagnetic Field-Aided Magnetic Soft Mold Reverse Imprinting Technology Applied in Microstructure ReplicationWeng, Yung-Chun; Weng, Yung-Jin; Yang, Sen-Yeu Polymer-Plastics Technology and Engineering77
472011Electromagnetic Imprint Technique Combined with Electrophoretic Deposition Technique in Forming Microelectrode StructuresWeng, Yung Chun; Weng, Yung Jin; Fang, Huang Sheng; Yang, Sen Yeu Japanese Journal of Applied Physics87
482011Novel fabrication of an Au nanocone array on polycarbonate for high performance surface-enhanced Raman scatteringChang, Wei-Yi; Lin, Kai-Heng; Wu, Jing-Tang; Yang, Sen-Yeu ; Lee, Kuang-Li; Wei, Pei-KuenJournal of Micromechanics and Microengineering1414
492011A study on the micro-injection molding of multi-cavity ultra-thin partsYang, S.-Y.; Nian, S.-C.; Huang, S.-T.; Weng, Y.-J.; YangSY Polymers for Advanced Technologies00
502011Fabrication of gold sub-wavelength pore array using gas-assisted hot embossing with anodic aluminum oxide (AAO) templateChang, Wei-Yi; Wu, Jing-Tang; Lin, Kai-Heng; Yang, Sen-Yeu ; Lee, Kuang-Li; Wei, Pei-KuenMicroelectronic Engineering149
512011Direct fabricating patterns using stamping transfer process with PDMS mold of hydrophobic nanostructures on surface of micro-cavityHuang, Yi-Hao; Wu, Jing-Tang; Yang, Sen-Yeu Microelectronic Engineering4843
522011Applying magnetic soft mold imprint technology with ultraviolet light-emitting-diode array on the fabrication of microlens arraysWeng, Y.-J.; Yang, S.-Y.; SEN-YEU YANG Polymers for Advanced Technologies
532011Fabrication of anti-reflective structures using hot embossing with a stainless steel template irradiated by femtosecond laserYao, Tsung-Fu; Wu, Ping-Han; Wu, Tzong-Ming; Cheng, Chung-Wei; Yang, Sen-Yeu Microelectronic Engineering3634
542010Fabrication of a nano/micro hybrid lens using gas-assisted hot embossing with an anodic aluminum oxide (AAO) templateWu, Jing-Tang; Chang, Wei-Yi; Yang, Sen-Yeu Journal of Micromechanics and Microengineering2825
552010A novel fabrication of polymer film with tapered sub-wavelength structures for anti-reflectionWu, Jing-Tang; Yang, Sen-Yeu ; Deng, Wei-Chih; Chang, Wei-YiMicroelectronic Engineering2017
562010Low-temperature embossing technique for fabrication of large-area polymeric microlens array with supercritical carbon dioxideWu, Jing-Tang; Chu, Ying-Ta; Yang, Sen-Yeu ; Li, Chen-ChungMicroelectronic Engineering1312
572010Rapid fabrication of surface-relief plastic diffusers by ultrasonic embossingLiu, Shih-Jung; Huang, Yu-Chin; Yang, Sen-Yeu ; Hsieh, Kuo-Huang Optics & Laser Technology2220
582010A study on application of making porous micro-structural aluminum oxide template by anodic aluminum oxide processing technology in cell reproductionWeng, Y.J.; Huang, J.C.; Weng, Y.C.; Wong, Y.C.; Liu, H.K.; Yang, S.Y.; SEN-YEU YANG Key Engineering Materials
592010Fabrication of gold sub-wavelength pores using gas-assisted hot embossing with anodic aluminum oxide (AAO) templateWei-Yi Chang; Jing-Tang Wu; Sen-Yeu Yang; Kuang-Li Lee; Pei-Kuen Wei; SEN-YEU YANG 2010 International Microprocesses and Nanotechnology Conference
602010Low-temperature embossing technique for fabrication of large-area polymeric microlens array with supercritical carbon dioxideJing-Tang Wu; Ying-Ta Chu; Sen-Yeu Yang; Chen-Chung Li; SEN-YEU YANG Microelectronic Engineering
612010Dip coating cooperated with stepped rotating lithography to fabricate rigid microstructures onto a metal rollerJing-Tang Wu; Hsin-Chun Lai; Sen-Yeu Yang; Tzu-Chien Huang; Sheng-Hsin Wu; SEN-YEU YANG Microelectronic Engineering
622010Novel fabrication of Surface Enhanced Raman Scattering(SERS) Sensor on Polycarbonate by Gas-assisted Hot Embossing Process and Anodic Aluminum Oxide (AAO) TemplateWEI-YI CHANG; JING-TANG WU; SEN-YEU YANG; PEI-KUEN WEI; SEN-YEU YANG The 9th Asian Workshop on Polymer Processing (AWPP2010)
632010超音波輔助射出成型製程探討枋定緯; 楊申語; 吳景棠; 梁佑豪; SEN-YEU YANG 中國機械工程學會第二十七屆全國學術研討會
642010Dip coating cooperated with stepped rotating lithography to fabricate rigid microstructures onto a metal rollerWu, Jing-Tang; Lai, Hsin-Chun; Yang, Sen-Yeu ; Huang, Tzu-Chien; Wu, Sheng-HsinMicroelectronic Engineering2018
652010Production of bioenergy via the combined processes using radio-frequency plasma and catalystsTu, W.-K.; Chang, C.-Y.; Lin, C.-F.; Shie, J.-L.; Chang, C.-F.; Kuo, J.T.; Yang, S.-Y.; Hsi, C.-L.; Shaw, D.-G.; Lee, D.-J.; SEN-YEU YANG Air and Waste Management Association's Annual Conference and Exhibition
662010A gasbag-roller-assisted UV imprinting technique for fabrication of a microlens array on a PMMA substrateWu, Jing-Tang; Yang, Sen-Yeu Journal of Micromechanics and Microengineering2220
672009Fabrication of organic flexible electrodes using transfer stamping processChan, Bin-Da; Hsieh, Kuo-Huang ; Yang, Sen-Yeu Microelectronic Engineering1716
682009Direct fabrication of microstructures on metal roller using stepped rotating lithography and electroless nickel platingHuang, Tzu-Chien; Wu, Jing-Tang; Yang, Sen-Yeu ; Huang, Po-Hsun; Chang, Shuo-HungMicroelectronic Engineering3732
692009Thin film patterns directly fabricated using transfer stamping techniqueChan, Bin-Da; Hsieh, Kuo-Huang ; Yang, Sen-Yeu Journal of Micromechanics and Microengineering 
702009Complete reversal imprinting for fabricating microlens arrays with faithful shape replicationHuang, P.-H.; SEN-YEU YANG Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures96
712009Thin-film patterns directly fabricated using a transfer stamping techniqueChan, B.-D.; Hsieh, K.-H.; Yang, S.-Y.; SEN-YEU YANG Journal of Micromechanics and Microengineering
722009Fabrication of rigid microstructures on a metal roller using stepped rotating lithographyHsin-Chun Lai; Jing-Tang Wu; Tzu-Chien Huang; Sen-Yeu Yang; SEN-YEU YANG The 35th International Conference on Macro and Nano Engineering(MNE)
732009A novel electromagnetism-assisted imprinting technology to replicate microstructures onto a large-area curved surface using a flexible magnetic moldWeng, Y.-J.; Weng, Y.-C.; Yang, S.-Y.; Wong, J.-L.; SEN-YEU YANG Polymers for Advanced Technologies
742009Products and bioenergy from the pyrolysis of rice straw via radio frequency plasma and its kineticsTu, Wen-Kai; Shie, Je-Lung; Chang, Ching-Yuan; Chang, Chiung-Fen; Lin, Cheng-Fang ; Yang, Sen-Yeu ; Kuo, Jing T.; Shaw, Dai-Gee; You, Yii-Der; Lee, Duu-Jong Bioresource Technology4833
752009A novel fabrication of polymer film with tapered sub-wavelength structures for anti-reflectionJing-Tang Wu; Sen-Yeu Yang; Wei-Chih Deng; Wei-Yi Chang; SEN-YEU YANG Microelectronic Engineering
762009Gas-assisted nanoparticle fluid magnetic imprinting technology in micro-lens manufacture and the application of projection lithographyWeng, Y.-J.; Weng, Y.-C.; Fang, H.-S.; Ke, C.-Y.; Yang, S.-Y.; SEN-YEU YANG Polymer - Plastics Technology and Engineering
772009Development of nanoparticle fluid imprinting technology in microstructure manufactureWeng, Y.-J.; Yang, S.-Y.; SEN-YEU YANG Polymer - Plastics Technology and Engineering
782009A novel magnetic nickel mold combined nano-particle fluid electromagnetism imprinting on replicating microstructuresWeng, Y.-J.; Weng, Y.-C.; Wong, Y.-C.; Yang, S.-Y.; SEN-YEU YANG 2009 International Conference on Signal Processing Systems
792009Fabrication of microlens arrays by using nano-particle fluid imprinting technologyWeng, Y.-J.; Weng, Y.-C.; Huang, J.-C.; Wong, Y.-C.; Yang, S.-Y.; Liu, H.-K.; SEN-YEU YANG 2009 International Conference on Signal Processing Systems
802009Study of transfer stamping technique for fabricating microstructureJian-Wei Chen; Jing-Tang Wu; Sen-Seu Yang; SEN-YEU YANG The 35th International Conference on Macro and Nano Engineering(MNE)
812009Fabrication of optical waveguide devices using electromagnetic assisted nanoimprintingWeng, Y.-J.; Weng, Y.-C.; Wong, Y.-C.; Yang, S.-Y.; Liu, H.-K.; SEN-YEU YANG 2009 International Conference on Signal Processing Systems
822009Fabrication of microlens arrays using a CO2-assisted embossing techniqueTzu-Chien Huang; Bin-Da Chan; Jyun-Kai Ciou; Sen-Yeu Yang; SEN-YEU YANG J. Micromech. Microeng.
832009Fabrication of microlens arrays using a CO<inf>2</inf>-assisted embossing techniqueHuang, T.-C.; Chan, B.-D.; Ciou, J.-K.; Yang, S.-Y.; SEN-YEU YANG Journal of Micromechanics and Microengineering
842009CO2 Gas-Assisted Micro Hot Embossing Process for Large-Area Replication of MicrostructuresSen-Yeu Yang; Jing-Tang Wu; Ying-Ta Chu; Yi-Hao Huang; SEN-YEU YANG The 2nd Asian Symposium on Nano Imprint Lithography(ASNIL)
852009Application of vacuum-assisted filling system with ultraviolet-light- emitting diode array to fabrication of waveguide microstructuresWeng, Y.J.; Weng, Y.C.; Fang, H.S.; Yang, S.Y.; SEN-YEU YANG Japanese Journal of Applied Physics
862009Fabricating nanostructures by atomic force microscopyHuang, J.-C.; Weng, Y.-J.; Yang, S.-Y.; Weng, Y.-C.; Wang, J.-Y.; SEN-YEU YANG Japanese Journal of Applied Physics
872008Fast fabrication of integrated surface-relief and particle-diffusing plastic diffuser by use of a hybrid extrusion roller embossing processHuang, Tzu-Chien; Ciou, Jian-Ren; Huang, Po-Hsun; Hsieh, Kuo-Huang ; Yang, Sen-Yeu Optics Express4745
882008Direct fabrication of rigid microstructures on a metallic roller using a dry film resistJiang, Liang-Ting; Huang, Tzu-Chien; Ciou, Chien-Ren; Chang, Chih-Yuan; Yang, Sen-Yeu ; Huang, Po-HsunJournal of Micromechanics and Microengineering3127
892008Polymer-ridge waveguide fabrication by gas-assisted UV embossing with soft moldCheng, Fang-Sung; Huang, Pei-Ying; Yang, Sen-Yeu International Polymer Processing 
902008Study on flow imbalance during filling a multi-cavity mold using a H-type runnersYang, Sen-Yeu ; Huang, Tzu-Chien; Huang, Po-Hsun; Ko, Tai-YuKey Engineering Materials 00
912008Bubble-free large-area replication of microstructures using gas-assisted UV embossing with modified reversal imprinting and gap-retained vacuumingHuang, Po-Hsun; Huang, Tzu-Chien; Yang, Sen-Yeu Journal of 
922008CO2-Assisted Embossing for fabrication of PMMA component under low temperature and with low pressureYang, Sen-Yeu ; Huang, Tzu-Chien; Ciou, Jyun-Kai; Chan, Bin-Da; Chang, Chih-Yuan; Loeser, John G.Journal of Micromechanics and Microengineering 
932008Novel hydrostatic pressuring mechanism for soft UV-inprinting processesCheng, Fang-Sung; Yang, Sen-Yeu ; Chen, Chien-ChangJournal of Vacuum Science and Technology B 
942008Fabrication of Microlens Arrays Using CO2-Assisted Embossing TechniqueHuang, Tzu-Chien; Chan, Bin-Da; Ciou, Jyun-Kai; Yang, Sen-Yeu Journal of Micromechanics and Microengineering 
952008Fabrication of large area resin microlens arrays using gas-assisted ultraviolet embossingHuang, Po-Hsun; Huang, Tzu-Chien; Sun, Yi-Ting; Yang, Sen-Yeu Optics Express5044
962008精密塑膠光學元件模具與複製成型技術整合研究-總計畫楊申語 
972008精密塑膠光學元件複製成型技術與設備之開發研究(II)楊申語 
982008微透鏡陣列滾輪式轉印製程之開發 (新制多年期第2年)楊申語 
992008Fabrication of microlens arrays using UV micro-stamping with soft roller and gas-pressurized platformYang, Sen-Yeu ; Cheng, Fang-Sung; Xu, Shu-Wen; Huang, Po-Hsun; Huang, Tzu-ChienMicroelectronic Engineering 
1002008彩色濾光片之生產裝置楊申語 
1012008改良式滾輪壓印裝置楊申語 
1022008滾印式彩色濾光片生產裝置楊申語 ; 謝國煌; 邱建仁; 江亮霆; 黃柏勳|
1032008具微結構之滾輪構造、模具及其製造方法楊申語 
1042008Novel hydrostatic pressuring mechanism for soft UV-imprinting processesCheng, F.-S.; Yang, S.-Y.; Chen, C.-C.; SEN-YEU YANG Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures
1052008Improving flow balance during filling a multi-cavity mold with modified runner systemsHuang, T.-C.; Huang, P.-H.; Yang, S.-Y.; SEN-YEU YANG International Polymer Processing66
1062008滾輪式微結構壓印器楊申語 ; 許淑雯; 吳景棠; 詹秉達; 黃子健|
1072008製作微光學結構之滾輪及其成形模具楊申語 ; 張致遠; 朱明輝
1082008A Study of an innovative technology for manufacturing optical waveguides based on vacuum-assisted micromoldingWeng, Y.-J.; Weng, Y.-C.; Yang, S.-Y.; Huang, J.-C.; Fang, H.-S.; Wong, Y.-C.; SEN-YEU YANG Polymer - Plastics Technology and Engineering
1092008Fabrication of microlens arrays using UV micro-stamping with soft roller and gas-pressurized platformYang, S.-Y.; Cheng, F.-S.; Xu, S.-W.; Huang, P.-H.; Huang, T.-C.; SEN-YEU YANG Microelectronic Engineering
1102008Pyrolysis of Rice Straw Using Radio-Frequency PlasmaTu, Wen-Kai; Shie, Je-Lung; Chang, Ching-Yuan; Chang, Chiung-Fen; Lin, Cheng-Fang ; Yang, Sen-Yeu ; Kuo, Jing-Tsung; Shaw, Dai-Gee; Lee, Duu-Jong Energy & Fuels 222923
1112008CO<inf>2</inf>-assisted embossing for the fabrication of PMMA components under low temperature and with low pressureYang, S.-Y.; Huang, T.-C.; Ciou, J.-K.; Chan, B.-D.; Loeser, J.G.; SEN-YEU YANG Journal of Micromechanics and Microengineering
1122008Replication of microlens arrays by gas-assisted hot embossingHocheng, H.; Wen, T.-T.; Yang, S.-Y.; SEN-YEU YANG Materials and Manufacturing Processes
1132008Large-area and thin light guide plates fabricated using UV-based imprintingHuang, P.-H.; Huang, T.-C.; Sun, Y.-T.; Yang, S.-Y.; SEN-YEU YANG Optics Express
1142008Development and research for applying innovative magnetic soft mold imprinting techniques in microstructure component manufacturingWeng, Y.-J.; Weng, Y.-C.; Yang, S.-Y.; SEN-YEU YANG Polymers for Advanced Technologies
1152008Polymer-ridge waveguide fabrication by gas-assisted UV embossing with a soft moldCheng, F.-S.; Huang, P.-Y.; Yang, S.-Y.; SEN-YEU YANG International Polymer Processing
1162007精密塑膠光學元件模具與複製成型技術整合研究-子計畫一:精密塑膠光學元件複製成型技術與設備之開發研究楊申語 
1172007微透鏡陣列滾輪式轉印製程之開發 (新制多年期第1年)楊申語 
1182007Rapid fabrication of ultraviolet-cured polymer microlens arrays by soft roller stamping processChang, Chih-Yuan; Yang, Sen-Yeu ; Chu, Ming-HuiMicroelectronic Engineering 
1192007用於光電製程之微轉印印章的製造方法楊申語 
1202007A novel method for fabrication of plastic microlens array with aperture stops for projection photolithographyChang, C.-Y.; SEN-YEU YANG ; Wu, M.-S.; Jiang, L.-T.; LON A. WANG Japanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers99
1212007微透鏡陣列之製造方法楊申語 
1222007A study on the innovative microlens projection lithography applied to the production of microstructuresWeng, Y.-J.; Yang, S.-Y.; MING-SHIANG WU ; Weng, Y.-C.; SEN-YEU YANG ; LON A. WANG Polymers for Advanced Technologies109
1232007Rapid fabrication of ultraviolet-cured polymer microlens arrays by soft roller stamping processChang, C.-Y.; Yang, S.-Y.; Chu, M.-H.; SEN-YEU YANG Microelectronic Engineering
1242007Fabrication of plastic microlens arrays using hybrid extrusion rolling embossing with a metallic cylinder mold fabricated using dry film resistJiang, L.-T.; Huang, T.-C.; Chiu, C.-R.; Chang, C.-Y.; Yang, S.-Y.; SEN-YEU YANG Optics Express
1252006Soft mold and gasbag pressure mechanism for patterning submicron patterns onto a large concave substrateCheng, Fang-Sung; SEN-YEU YANG ; Nian, Shih-Chih; LON A. WANG Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures1921
1262006Fabrication of polymer microlens arrays using capillary forming with a soft mold of micro-holes array and UV-curable polymerChang C.-Y; SEN-YEU YANG ; Huang L.-S; Hsieh K.-H.Optics Express15
1272006Singular uniformity after reflow of varied-shaped flip chip solder bump on single substrateHsu, H.-J.; Huang, J.-T.; Chao, P.-S.; Wu, C.-S.; Shih, S.-H.; Yang, S.-Y.; SEN-YEU YANG 2006 International Conference on Electronic Materials and Packaging
1282006A novel fabrication method and optimum tooling design for microlens arraysShen Y.-K; Chang C.-Y; Shen Y.-S; SEN-YEU YANG Annual Technical Conference - ANTEC, Conference Proceedings1
1292006用於光電製程之微轉印方法楊申語 
1302006A roller embossing process for rapid fabrication of microlens arrays on glass substratesWeng, Yung Chun; Yang, Sen Yeu Microsystem Technologies - Micro- and Nanosystems. Information Storage and Processing Systems105
1312006Fabrication of polymer microlens arrays using capillary forming with a soft mold of micro-holes array and UV-curable polymerChang, C.-Y.; Yang, S.-Y.; Huang, L.-S.; SEN-YEU YANG Optics Express2531
1322006Kneading and molding of ceramic microparts by precision powder injection molding (PIM)Yang, S.Y.; Huang, C.K.; Lin, B.C.; SEN-YEU YANG ; WEN-CHENG J. WEI Journal of Applied Polymer Science33
1332006Fabrication of plastic microlens array using gas-assisted micro-hot-embossing with a silicon moldChang, C.-Y.; Yang, S.-Y.; Huang, L.-S.; Chang, J.-H.; SEN-YEU YANG Infrared Physics and Technology
1342006A novel method for rapid fabrication of microlens arrays using micro-transfer molding with soft moldChang, C.-Y.; Yang, S.-Y.; Huang, L.-S.; Jeng, T.-M.; SEN-YEU YANG Journal of Micromechanics and Microengineering
1352005Molding of thin sheets using impact micro-injection moldingNian, S.C.; SEN-YEU YANG International Polymer Processing118
1362005Development of fluid-based heating and pressing systems for micro hot embossingChang, J.-H.; Yang, S.-Y.; SEN-YEU YANG Microsystem Technologies
1372005Direct imprinting using soft mold and gas pressure for large area and curved surfacesChang, Jer-Haur; Cheng, Fang-Sung; Chao, Chi-Chung; Weng, Yung-Chun; Yang, Sen-Yeu ; Wang, Lon A. Journal of Vacuum Science & Technology
1382005滾輪微壓印製程開發與微光學元件之製作楊申語; SEN-YEU YANG 中國機械工程學會第二十二屆全國學術研討會
1392004Study on numerical simulation and experiment of lightguide plate in injection moldingShen, Y.K.; Wu, W.Y.; Yang, S.Y.; Jian, H.M.; SEN-YEU YANG Journal of Reinforced Plastics and Composites1613
1402004快速加熱冷卻暨均勻施壓的微熱壓印成型方法楊申語 
1412004Flow visualization of filling with aid of colored billets during impact micro-injection moldingNian, S.C.; Yang, S.Y.; SEN-YEU YANG International Polymer Processing
1422004產學合作計畫:創新型微光學增光分色片應用於CMOS影像感測器之研究(2/2)楊申語 
1432004微型射出成型機之融膠射出機構楊申語 
1442004總計畫─光學精密元件射出成形之整合研究(Ⅱ)楊申語 
145200412-in. wafer imprinting using soft mold and gas pressure mechanismCheng F.S; Weng Y.C; SEN-YEU YANG ; LON A. WANG Digest of Papers - Microprocesses and Nanotechnology 200400
1462004光學精密元件射出成形之整合研究(II)─子計畫一:楔型板件精密射出與射出壓縮成形研究(II)楊申語 
1472004Flow Visualization of filling with Aid of Colored Billets During Imact Micro-Injection Molding楊申語; SEN-YEU YANG International Polymer Processing
1482003A novel micro-scale recombining technique using lateral joining for a large-area molding with small featuresWu, Chih-Wei; Huang, Long-Sun; Chang, Jer-Haur; Yang, Sen-Yeu ; Lee, Chih-Kung IEEE The Sixteenth Annual International Conference on Micro Electro Mechanical Systems10
1492003光學精密元件射出成形之整合研究─總計畫楊申語 
1502003產學合作計畫:創新型微光學增光分色片應用於CMOS影像感測器之研究(1/2)楊申語 
1512003氣體微熱壓成型方法楊申語 
1522003光學精密元件射出成形之整合研究─子計畫一:楔形板件精密射出與射出壓縮成型研究楊申語 
1532003Effect of Processing on Precision of Composite PanelsYang, S.Y.; Huang, C.K.; Chen, C.C.; SEN-YEU YANG Materials and Manufacturing Processes
1542003Study on the Performance of Rapid Mold Heating/Cooling System for Micro Injection Molding楊申語; SEN-YEU YANG Proceeding of 19th Annual Meeting of Polymer Processing Society
1552003Experimental Study on the Hot Embossing of Large Thin Thermoplastic Films With Micro-Features楊申語; SEN-YEU YANG Proceeding of 19th Annual Meeting of Polymer Processing Society
1562003創新型微光學增光分色片之設計與製造楊申語; SEN-YEU YANG 中國機械工程學會第二十屆全國學術研討會
1572003Gas pressurized hot embossing for transcription of micro-featuresChang, J.-H.; Yang, S.-Y.; SEN-YEU YANG Microsystem Technologies
1582003Secondary Gas Penetrations in Ribs During Full-Shot Gas-Assisted Injection MoldingYang, S. Y.; Lin, C. T.; Chang, J. H.; YangSY Advances in Polymer Technology26
1592002先進及革新性射出成型技術之研究(3/3)─子計畫五:陶瓷粉末射出壓縮成型之研究楊申語 
1602002Flow visualization of filling process during micro-injection moldingYang, S.Y.; Nian, S.C.; Sun, I.C.; SEN-YEU YANG International Polymer Processing
1612002Fracture types and thickness distribution in superplastic sheets formed with plastic injection moldingParng, S.H.; Yang, S.Y.; SEN-YEU YANG Journal of Materials Processing Technology
1622002Effects of conductive fibers and processing conditions on the electromagnetic shielding effectiveness of injection molded compositesYang, S. Y.; Parng, S. H.; Chen, C. Y.; YangSY Polymer Composites21
1632002Study on the residual wall thickness at dimensional transitions and curved sections in gas-assisted molded circular tubesYang, S.Y.; Chou, H.L.; SEN-YEU YANG Polymer Engineering and Science
1642002Ultrasonic Vibration Heated Hot Embossing of Plastic Plates with Micro-features楊申語; SEN-YEU YANG Proceeding of 18th Annual Meeting of Polymer Processing Society
1652002Study on the Residual Wall Thickness at Dimensional Transitions and Curved Sections in Gas-Assisted Injection Molded Circular TubesYang, S. Y.; Chou, H. L.; YangSY Polymer Engineering and Science
1662002氣輔射出圓管件尺寸脹縮及彎弧區殘留壁厚的探討楊申語 
1672002微感測器共通型封裝的方法楊申語 
1682001先進及革新性射出成型技術之研究(2/3)─子計畫五:陶瓷粉末射出壓縮成型之研究楊申語 
1692001Injection Molding of Ribbed Plastic Plates with a Superplastic Zn-22% Al SheetYang, S. Y.; Parng, S. H.; YangSY Advances in Polymer Technology5
1702001Injection molding of plastic plates combined with boss features on superplastic Zn-22Al sheetYang, S.Y.; Parng, S.H.; SEN-YEU YANG International Polymer Processing
1712001Fracture types and thickness distribution in superplastic sheets formed with plastic injection moldingParng, S.H.; Yang, S.Y.; SEN-YEU YANG Materials and Manufacturing Processes
1722001覆晶凸塊形狀及排列的設計方法楊申語 
1732000先進及革新性射出成型技術之研究(1/3)─子計畫五:陶瓷粉末射出壓縮成型之研究楊申語 
1742000半導體金線偏移觀察及轉注壓縮成型應用探討楊申語 
1752000Ribbed Package Geometry for Reducing Thermal Warpage and Wire Sweep during PBGA EncapsulationYang, S. Y.; Jiang, S. C.; Lu, W. S.; YangSY IEEE Transactions on Components and Packaging Technologies 
1761999短射壓縮成型之基本探討及應用楊申語 
1771999氣體輔助射出成型製程特性與模擬、設計/成形法則和成品結構性、結晶型態與品質之整合研究─子計畫五:氣體輔助射出成型氣道設計及成型性探討(Ⅲ)楊申語 
1781999減翹半導體封膠外型及其製造裝置楊申語 
1791999Void shape in Gas-channel Ribs in Gas-Assisted Injection Molded PlatesYang, S. Y.; Chu, P. T.; YangSY Advances in Polymer Technology 
1801999Void shape in gas-channel ribs in gas-assisted injection-molded platesYang, S.Y.; Chu, P.T.; SEN-YEU YANG Advances in Polymer Technology
1811998Gas penetrations in symmetrical tapping ribs during gas-assisted injection moldingParng, S.H.; Yang, S.Y.; SEN-YEU YANG International Polymer Processing
1821998高分子複材與聚摻合物之參數分析及其應用(3/3)─子計畫(二):高分子聚摻合物加工方式及參數對成品組織與性質之探討楊申語 
1831998氣體輔助射出成型製程特性與模擬,設計/成型法則和成品結構性、結晶型態與品質之整合研究(2/3)─子計畫(五):氣體輔助射出成型氣道設計及成型性探討楊申語 
1841998Experimental study of injection-charged compression molding of thermoplasticsYang, S.Y.; Chen, Y.C.; SEN-YEU YANG Advances in Polymer Technology
1851997Experimental study on the accuracy of advanced composite tools for slanted shapesHuang, C.K.; Yang, S.Y.; SEN-YEU YANG Polymer Composites
1861997Warping in advanced composite tools with varying angles and radiiHuang, C.K.; Yang, S.Y.; SEN-YEU YANG Composites Part A: Applied Science and Manufacturing
1871997Flow visualization of the gas-assisted injection molding processYang, S.Y.; Liou, S.J.; Liou, W.N.; SEN-YEU YANG Advances in Polymer Technology
1881997高分子複材與聚摻合物之參數分析及其應用─子計畫(二):高分子聚摻合物加工方式及參數對成品組統與性質之探討(2/3)楊申語 
1891997Study on accuracy of angled advanced composite toolsHuang, C.K.; Yang, S.Y.; SEN-YEU YANG Materials and Manufacturing Processes
1901997氣體輔扐射出成型製程特性與模擬、設/ 成型法則和成品結構性、結晶型態與品質之整合研究─子計畫(五):氣體輔助射出成型氣道設計及成型性探討(1/3)楊申語 
1911996精密射出模之融膠傳輸,模溫及收縮量控制探討(II)楊申語 
1921996複材模具最佳化成型條件探討(Ⅱ)楊申語 
1931996模具設計製造─模具設計與製造整合研究(II)--子計畫一:精密射出模之融膠傳輸、模溫及收縮量控制探討楊申語 
1941996高分子複材與聚摻合物之參數分析及其應用─高分子複合材料及聚滲合物之參數分析及其應用:子計畫(三) 高分子聚摻合物加工方式及參數對成品組楊申語 
1951996Effects of cooling time and mold temperature on quality of moldings with precision contourYang, S.Y.; Lien, L.; SEN-YEU YANG Advances in Polymer Technology
1961996Experimental study on injection compression molding of cylindrical partsYang, S.Y.; Nien, L.; SEN-YEU YANG Advances in Polymer Technology
1971996Experimental study on the injection compression molding of parts with precision contoursYang, S.Y.; Lien, L.; SEN-YEU YANG International Polymer Processing
1981996A study of rib geometry for gas-assisted injection moldingYang, S.Y.; Huang, F.Z.; Liau, W.N.; SEN-YEU YANG Polymer Engineering and Science
1991995射出壓縮成型後充填分析楊申語 
2001995精密塑膠模具融膠傳輸模溫控制及收縮控制探討楊申語 
2011995精密射出成型模具溫度與成品品質探討楊申語 
2021995Development of moldability diagrams for gas?assisted injection moldingYang, S.Y.; Liou, S.J.; SEN-YEU YANG Advances in Polymer Technology
2031995Study on the Performance of Cooling Systems in Precision Injection MoldsYang, Sy; Chang, Hc; SEN-YEU YANG International Polymer Processing1
2041995Influence of processing on quality of injection?compression?molded disksYang, S.Y.; Ke, M.Z.; SEN-YEU YANG Polymer Engineering &amp; Science
2051995射出壓縮成型後充填分析(II)楊申語 
2061995Unstable Gas Penetrations in Symmetrical Rib Channels During Gas-Assisted Injection-MoldingYang, Sy; Huang, Fz; SEN-YEU YANG International Polymer Processing11
2071995Experimental study on the effects of adding compression to injection molding processYang, S.Y.; Ke, M.Z.; SEN-YEU YANG Advances in Polymer Technology
2081995模具設計與製造整合性研究─模具設計與製造研究:子計畫(三)-精密塑膠模具融膠傳輸、模溫控制及收縮控制探討楊申語 
2091994閉模熱鍛的實驗探討楊申語 
2101994氣體輔助射出成型的基本研究楊申語 
2111993射出壓縮成型過程的基本探討楊申語 
2121992碳鋼閉模熱鍛技術之探討與電腦模擬蘇侃; 楊宏智; 楊申語 ; 鄭榮和 ; Cheng, Jung-Ho 
2131988CAD/CAM 系統的選擇與評估楊宏智; 陳復國 ; 楊申語 ; Yang, Sen-Yen機械工程會刊 
214-特定光固化型壓差式壓印成型設備楊申語 
215-Specific-light-cured and pressure-differential embossing apparatus 特定光固化型壓差式壓印成型設備楊申語 
216-用於光電製程之微轉印印章與沾色裝置楊申語 
217-微結構壓印器楊申語 
218-靜電塗佈設備楊申語 
219-靜電塗佈設備楊申語 
220-Adhesives With Mechanical Tunable AdhesionS. Yang ; P. C. Lin 
221-IMPRINTING SYSTEM AND METHOD WITH NANOFLUIDS ?米粉?體壓印系統及其方法YUNG-JIN WENG; SEN-YEU YANG ; YUNG-CHUN WENG; JIN-LUNG WENG
222-改良式壓印裝置楊申語