第 1 到 96 筆結果,共 96 筆。
公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 | |
---|---|---|---|---|---|---|---|
1 | 2024 | Rolling V-groove microstructures on glass using a modified PDMS mold | Hsu, Ming Huai; YAO-YANG TSAI ; Gao, Jhao Hong; SEN-YEU YANG | Microsystem Technologies | |||
2 | 2023 | Induction heating of dual magnetic particles embedded PDMS molds for roller embossing applications | Hsu, Ming Huai; YAO-YANG TSAI ; He, Jyun Wei; SEN-YEU YANG | Microsystem Technologies | 2 | 3 | |
3 | 2023 | A double-sided PDMS mold for double-sided embossing by rollers | Hsu, Ming Huai; YAO-YANG TSAI ; He, Jyun Wei; SEN-YEU YANG | Microsystem Technologies | 0 | ||
4 | 2023 | Smart Manufacturing Security Challenges and Solutions | Hsu, Yu Shan; Yang, Ming Hour; Lin, I. An; YAO-YANG TSAI | 2023 International Conference on Consumer Electronics - Taiwan, ICCE-Taiwan 2023 - Proceedings | 0 | ||
5 | 2022 | Induction heating ferromagnetic particles embedded PDMS mold for microstructure embossing | Hsu M.-H; YAO-YANG TSAI ; SEN-YEU YANG | Journal of Physics Communications | 1 | 1 | |
6 | 2020 | 車削路徑自動特徵辨識及工序解析對話式CAM系統 | 莊昇祐; 黃炬凱; 鄭志平; 蔡曜陽; 洪秉暉; 蔡曜陽 | 機械工業雜誌 | |||
7 | 2020 | The effects of different slurry concentrations and wire speeds for swinging and non-swinging wire-saw machining | YAO-YANG TSAI ; Chen, Y.-C.; YUNN-SHIUAN LIAO ; Hsieh, C.-C.; Tsao, C.-C.; Hsu, C.-Y. | Processes | |||
8 | 2020 | Grey-taguchi-based optimization of wire-sawing for a slicing ceramic | Tsai Y.-Y; Ho J.-K; Wang W.-H; Hsieh C.-C; Tsao C.-C; Hsu C.-Y.; YAO-YANG TSAI | Processes | |||
9 | 2020 | Slicing ceramics on material removed by a single abrasive particle | Tsai, Y.-Y.; Wu, M.-C.; Liao, Y.-S.; Tsao, C.-C.; Hsu, C.-Y.; YUNN-SHIUAN LIAO ; YAO-YANG TSAI | Materials | 1 | ||
10 | 2019 | 鑽孔特徵辨識與路徑優化整合技術於模具之應用 | 蔡玉麟; 劉楊倫; 蔡曜陽 | 機械工業雜誌 | |||
11 | 2018 | Employing tricyclic fusion method to splice a silicon cored fiber with a single mode fiber | Hsu Y.-L; Nian J.-R; Tsai Y.-Y; YAO-YANG TSAI ; LON A. WANG | Optics InfoBase Conference Papers | 0 | 0 | |
12 | 2018 | Improving Machining Efficiency Methods of Micro EDM in Cold Plasma Jet | Yan, C.; Zou, R.; Yu, Z.; Li, J.; Tsai, Y.; YAO-YANG TSAI | Procedia CIRP | |||
13 | 2018 | 加工特徵辨識技術於鑽孔加工之應用 | 吳正傑; 蔡玉麟; 劉楊倫; 蔡曜陽 | 機械工業雜誌 | |||
14 | 2018 | A Study of the Debris Exclusion for Various Cross-section Electrodes in Linear Motor Equipped Deep Cavity EDM Process | Liao, Y.S.; Liang, F.Y.; YAO-YANG TSAI ; YUNN-SHIUAN LIAO | Procedia CIRP | 2 | 0 | |
15 | 2017 | Position estimation capability on saliency-based sensorless drive of permanent magnet machine using different injection signals | Yang, S.-C.; Yang, S.-M.; You, Z.-C.; Tsai, Y.-Y.; SHIH-CHIN YANG ; YAO-YANG TSAI | 2017 IEEE International Electric Machines and Drives Conference | 1 | 0 | |
16 | 2014 | Effects of on-time on microstructure and corrosion resistance of Pulse-Micro-Arc oxidation coatings formed on titanium alloy | Chen, Y.-S.; YAO-YANG TSAI | Advanced Materials Research | 0 | 0 | |
17 | 2014 | Effects of On-Time on Microstructure and Corrosion Resistance of Pulse-Micro-Arc Oxidation Coatings Formed on Titanium Alloy | Yen Shou Chen; Yao Yang Tsai; YAO-YANG TSAI | Advanced Materials Research | |||
18 | 2014 | Investigation of PZT/Si wafer micro milling using diamond coated tool | YAO-YANG TSAI | ASME 2014 International Manufacturing Science and Engineering Conference, Collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference | 0 | 0 | |
19 | 2014 | A new theory about single-walled carbon nanotubes | Tsai, Y.Y.; Fang, S.C.; YAO-YANG TSAI | International Journal of Modern Physics B | |||
20 | 2014 | Effects of sintered structural parameters on reducing the superheat level in heat pipe evaporators | Tsai, Y.-Y.; Lee, C.-H.; YAO-YANG TSAI | International Journal of Thermal Sciences | |||
21 | 2014 | Experimental study of evaporative heat transfer in sintered powder structures at low superheat levels | Tsai, Y.-Y.; Lee, C.-H.; YAO-YANG TSAI | Experimental Thermal and Fluid Science | |||
22 | 2013 | Effects of sintered powder structural thickness on thin-film evaporation heat transfer at low superheat levels | Lee, C.H.; YAO-YANG TSAI | Journal of Applied Physics | 0 | 0 | |
23 | 2013 | Colorful Oxide Film Formation on Titanium by using EDM Process | Yao-Yang Tsai; Pei-Lun Song; Jeffrey Shih-Chung Fang; YAO-YANG TSAI | INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING | |||
24 | 2013 | An investigation into electrode wear in layer-cut EDM process | Song, P.-L.; Chang, Y.-M.; Tsai, Y.-Y.; YAO-YANG TSAI | Lecture Notes in Electrical Engineering | |||
25 | 2013 | Estimation of occluded lower limb using inverted pendulum model | Tenn, H.-K.; Tsai, Y.-Y.; YAO-YANG TSAI | Applied Mechanics and Materials | |||
26 | 2013 | The influence of thickness, diameter, chiral and bond angle on the value of Young's modulus for chiral single-walled carbon nanotubes | Fang, S.-C.; Tsai, Y.-Y.; Chang, W.-J.; YAO-YANG TSAI | Journal of Nanomaterials and Biostructures | |||
27 | 2012 | Measurement of thin-film evaporation heat transfer for evaporators with sintered powder wick structure | Lee, C.-H.; YAO-YANG TSAI | Advanced Materials Research | 0 | 0 | |
28 | 2012 | Feature extraction from depth camera | Lin, Y.-L.; Wang, M.-J.J.; Tsai, Y.-Y.; Huang, J.; YAO-YANG TSAI | Advanced Science Letters | |||
29 | 2012 | 微模具放電加工與表面拋光複合新製程 | 蔡曜陽; YAO-YANG TSAI | 2012先進成型与材料加工技術國際研討會, | |||
30 | 2012 | COLORFUL OXIDE FILM FORMATION ON TITANIUM BY USING EDM PROCESS | Y. Y. TSAI; S. C. FANG; P. L. SONG; YAO-YANG TSAI | International Conference on Innovative Design and Manufacturing | |||
31 | 2012 | An Investigation Into Electrode Wear In Layer-Cut EDM Process | Yao-Yang Tsai; Pei-Lun Song; Yo-Ming Chang; YAO-YANG TSAI | 1st International Conference on Intelligent Technologies and Engineering Systems (ICITES), | |||
32 | 2012 | Measurement of thin-film evaporation heat transfer for evaporators with sintered powder wick structure | Cho-Han Lee; Yao-Yang Tsai; YAO-YANG TSAI | The 4th International Conference on Advanced Manufacturing (ICAM) | |||
33 | 2012 | A Study of the Condition and Mechanism of Nucleation in Pulse micro-arc oxidation (MAO) | Y.S. Chen; Y.Y. Tsai; YAO-YANG TSAI | International Conference on Innovative Design and Manufacturing | |||
34 | 2011 | 三軸工具機銑削路徑之精加工表面研究 | 邱肇彥; 蔡曜陽; YAO-YANG TSAI | 中國機械工程學會第二十八屆全國學術研討會論文, D01-130, | |||
35 | 2011 | Colorful Oxide Film Formation on Titanium by EDM Process | Y.Y. Tsai; P.L. Song; Y.S. Chen; YAO-YANG TSAI | The 2nd International Symposium on Hybrid Materials and Processing, HyMaP | |||
36 | 2010 | Using electro-rheological chain structure to improve SKD11 surface | Hung, M.-C.; Tsai, Y.-Y.; YAO-YANG TSAI | Advanced Materials Research | 2 | 0 | |
37 | 2010 | Real time depth sensing with automatic determined depth range for human computer interactive applications | Wang, J.V.; Chen, P.L.; Liao, C.P.; Tsai, Y.Y.; Huang, J.; Wang, K.S.; YAO-YANG TSAI | 2010 International Conference on Image Processing, Computer Vision, and Pattern Recognition | |||
38 | 2010 | Real-time physics-based 3D biped character animation using an inverted pendulum model | Tsai, Y.-Y.; Lin, W.-C.; Cheng, K.B.; Lee, J.; Lee, T.-Y.; YAO-YANG TSAI | IEEE Transactions on Visualization and Computer Graphics | |||
39 | 2010 | An investigation of attachment on electrode surface in Dry EDM | K.Y. Shue; Y.Y. Tsai; Y.M. Chang; YAO-YANG TSAI | The 13th International Symposium on Advances in Abrasive Technology, | |||
40 | 2010 | Using Electro-rheological Chain Structure to Improve SKD11 Surface and Different Sizes of Electro-rheological Effect | M. C. Hung; Y.Y. Tsai; L. Wang; YAO-YANG TSAI | The 13th International Symposium on Advances in Abrasive Technology, | |||
41 | 2010 | A new cutting force model for micro-milling and determination of optimal cutting parameters | Wang, S.-M.; Chiang, Z.-S.; Chen, D.-F.; YAO-YANG TSAI | Advanced Materials Research | 1 | 0 | |
42 | 2010 | An investigation of attachment on electrode surface in Dry EDM | Shue, K.-Y.; Tsai, Y.-Y.; YAO-YANG TSAI | Advanced Materials Research | 7 | 0 | |
43 | 2010 | Effects of polymer particles suspending in dielectric fluid on surface roughness of EDM | Tsai, Y.-Y.; YAO-YANG TSAI | Advanced Materials Research | 7 | 0 | |
44 | 2009 | An investigation into surface roughness of EDM using soft particles suspension in silicone oil | Tsai, Y.Y.; YAO-YANG TSAI | Key Engineering Materials | 4 | 0 | |
45 | 2009 | Surface Polishing and Improvement by Powder Mixed Dielectric Electric Discharge Machining Combined Electrorheological Effect | Ming-Chih Hung; Chih-Kang. Chang; Yao-Yang Tsai; Lin Wang; YAO-YANG TSAI | 2009磨粒加工學會年會暨加工技術研討會, | |||
46 | 2009 | Investigation on Colorful Titanium Oxide Reacted Film Using EDM Process | Yao Yang Tsai; P.L. Song; YAO-YANG TSAI | Advances in Materials and Processing Technologies (AMPT) Conference, | |||
47 | 2009 | SUSPENDING POLYMER POWDERS IN EDM DIELECTRIC FLUID TO DEVELOP EDM-POLISHING COMBINED METHOD | Y.Y .Tsai; C.K. Chang; YAO-YANG TSAI | Asia Pacific Conference on Optics Manufacture(APCOM), | |||
48 | 2009 | 放電加工製作彩色氧化鈦反應層之研究 | 蔡曜陽; 宋沛倫; YAO-YANG TSAI | 中國機械工程學會第二十六屆全國學術研討會論文, | |||
49 | 2009 | Production of carbon nanotubes by single-pulse discharge in air | Tsai, Y.Y.; Su, J.S.; Su, C.Y.; He, W.H.; Tsai, Y.Y.; Su, J.S.; Su, C.Y.; He, W.H.; YAO-YANG TSAI | Journal of Materials Processing Technology | |||
50 | 2009 | AN INVESTIGATION INTO ELECTRODE WEAR IN LAYER-CUT EDM PROCESS, | Y. M. Chang; P. L. Song; Y. Y. Tsai; YAO-YANG TSAI | Asia Pacific Conference on Optics Manufacture (APCOM), | |||
51 | 2009 | A novel method of surface polishing in EDM Process | Y.Y .Tsai; YAO-YANG TSAI | International Conference on Advanced Manufacturing and Automation INCAMA 2009, | |||
52 | 2009 | Effects of Polymer Particles Suspending in Dielectric Fluid on Surface Roughness of EDM | Y.Y. Tsai; C.K. Chang; YAO-YANG TSAI | The International Conference on Manufacturing Science and Engineering (ICMSE 2009), | |||
53 | 2008 | 3D創成微放電銑削製程之電極消耗與即時補償技術 (新制多年期第1年) | 蔡曜陽 | ||||
54 | 2008 | 微放電加工狀態之線上偵測系統之開發 | 蔡曜陽 | ||||
55 | 2008 | Development of a combined machining method using electrorheological fluids for EDM | Tsai, Y.Y.; Tseng, C.H.; Chang, C.K.; TsaiYY | Journal of Materials Processing Technology | |||
56 | 2008 | Development of a combined machining method using electrorheological fluids for EDM | Tsai, Y.Y.; Tseng, C.H.; Chang, C.K.; Tsai, Y. Y.; Tzeng, C.H.; Chang, C. K.; YAO-YANG TSAI | Journal of Materials Processing Technology | |||
57 | 2008 | A novel method to produce carbon nanotubes using EDM process | Tsai, Y.Y.; Su, J.S.; Su, C.Y.; YAO-YANG TSAI | International Journal of Machine Tools and Manufacture | |||
58 | 2008 | SURFACING FINISHING USING CARBON NANOTUBE FOREST | T.C. Wu; N.K. Chang; P.K. Huang; Y.Y. Tsai; S.H. Chang; YAO-YANG TSAI | Proceedings of the ASME 2008 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2008), | |||
59 | 2008 | 利用高分子電流變液於放電拋光複合製程之開發與研究 | 蔡曜陽; 張志綱; YAO-YANG TSAI | 中國機械工程學會第二十五屆全國學術研討會論文, | |||
60 | 2008 | The Effect of Processing Parameters on the Synthesis of CNTs by a Micro Electro-Discharge Technique under the atmosphere | Yao-Yang Tsai; Jia-Shiang Su; Cherng-Yuh Su; Chung-Kwei Lin; YAO-YANG TSAI | International Conference on New Diamond and Nano Carbons NDNC, | |||
61 | 2008 | Polishing Effects of polymer particles in PMD - EDM process | Y.Y. Tsai; C.K. Chang; YAO-YANG TSAI | 8 th Asia-Pacific Conference on Materials Processing (2008), | |||
62 | 2008 | A novel method to produce carbon nanotubes using EDM process | Tsai, Y.Y.; Su, J.S.; Su, C.Y.; TsaiYY | International Journal of Machine Tools and Manufacture | |||
63 | 2008 | Development of EDM-Polishing by Electrorheological Fluid | Y.Y. Tsai; C.H. Tzeng; YAO-YANG TSAI | Proceeding of SME on Precision Manufacturing, | |||
64 | 2008 | Surface finishing using carbon nanotube forest | Wu, T.-C.; Chang, N.-K.; Su, C.-C.; Huang, P.-K.; Tsai, Y.-Y.; Lin, H.-Y.; Chang, S.-H.; YAO-YANG TSAI | ASME Design Engineering Technical Conference | |||
65 | 2008 | An investigation into surface roughness of EDM using soft particles suspension in silicone oil | Y.Y .Tsai; C.K. Chang; YAO-YANG TSAI | International Symposium on Advances in Abrasive Technology (ISAAT), | |||
66 | 2007 | 3D創成微放電銑削製程之電極消耗與即時補償技術 (新制多年期第2年) | 蔡曜陽 | ||||
67 | 2007 | 多工型臥式高精密微小4軸CNC加工機之研發及其應用-子計畫二:微加工製程的整合化技術研發(3/3) | 蔡曜陽 | ||||
68 | 2007 | 利用電流變液發展微放電拋光複合加工技術之研發 (新制多年期第1年) | 蔡曜陽 | ||||
69 | 2007 | 微球狀元件組裝之模擬設計 | 蔡曜陽; 邱季霖; YAO-YANG TSAI | 2007模具技術與論文發表會論文集, | |||
70 | 2007 | Animation generation and retargeting based on physics characteristics | Tsai, Y.-Y.; Chu, H.-K.; Cheng, K.B.; Lee, T.-Y.; Yen, C.-L.; YAO-YANG TSAI | 3rd International Conference on Intelligent Information Hiding and Multimedia Signal Processing, 2007. | |||
71 | 2007 | Influence of current impulse on machining characteristics in EDM | Tsai, Y.Y.; YAO-YANG TSAI | Journal of Mechanical Science and Technology | 25 | 20 | |
72 | 2007 | Development of A Combined Machining Method Using Electrorheological Fluids For EDM | Y. Y. Tsai; C.H. Tzeng,; C. K. Chang; YAO-YANG TSAI | Advances in Materials and Processing Technologies (AMPT) Conference, | |||
73 | 2007 | Polishing effect of polymer particles mixed in EDM process, | Yao-Yang Tsai; Chih-Kang Chang; Chien-Hao Tseng; YAO-YANG TSAI | Proceeding of Taiwan-Tohoku Joint International Symposium for Mechanical Science based on Nanotechnology, | |||
74 | 2007 | Influence of Non-metal Particles Mixed in Dielectric Fluid Electric Discharge Machining | Yao-Yang Tsai; Chih-Kang Chang; YAO-YANG TSAI | Proceeding of Asia Electric Machining Symposium, 2007. | |||
75 | 2007 | Influence of Current Impulses on Machining Characteristics in EDM | Y. Y. Tsai; C.T. Lu; YAO-YANG TSAI | Advances in Materials and Processing Technologies (AMPT) Conference, | |||
76 | 2007 | 於大氣下應用單發放電製造奈米碳管 | 蘇嘉祥; 蔡曜陽; YAO-YANG TSAI | 第五屆精密機械與製造技術研討會, | |||
77 | 2007 | 微細球狀元件組裝之模擬與設計 | 蔡曜陽; 邱季霖; YAO-YANG TSAI | 第五屆精密機械與製造技術研討會, | |||
78 | 2007 | Influence of current impulse on machining characteristics in EDM | Tsai, Y.Y.; Lu, C.T.; YAO-YANG TSAI | Journal of Mechanical Science and Technology | |||
79 | 2007 | 微球接頭組裝配合間隙之分析 | 蔡曜陽; 邱季霖; YAO-YANG TSAI | 中國機械工程學會第二十四屆全國學術研討會論文, | |||
80 | 2007 | 電流波形對於放電加工特性之影響 | 蔡曜陽; 呂政達; YAO-YANG TSAI | 2007模具技術與論文發表會論文集, | |||
81 | 2007 | 放電脈衝電流上升與下降對於加工特性之探討 | 蔡曜陽; 呂政達; YAO-YANG TSAI | 中國機械工程學會第二十四屆全國學術研討會論文集, | |||
82 | 2006 | THE EFFECTS OF POWDER BEHAVIOR IN POWDER-MIXED DIELECTRIC EDM | 蔡曜陽; YAO-YANG TSAI | Proceedings of Advance of Material Process Technologies | |||
83 | 2006 | 電流變液中之放電拋光技術開發 | 蔡曜陽; YAO-YANG TSAI | 第五屆精密製造學術研討會 | |||
84 | 2006 | 放電加工液中添加粉末對放電波形的探討及其加工影響 | 蔡曜陽; YAO-YANG TSAI | 中國機械工程學會第二十三屆全國學術研討會論文集 | |||
85 | 2006 | Studies on cut-off grinding of BK7 optical glass using thin diamond wheels | Luo, S.Y.; Tsai, Y.Y.; Chen, C.H.; YAO-YANG TSAI | Journal of Materials Processing Technology | |||
86 | 2005 | The Influence of Discharge Pulse on the Electrode Wear in micro-EDM | 蔡曜陽; YAO-YANG TSAI | Proceedings of The International Conference on Manufacturing, Machine Design and Tribology | |||
87 | 2004 | An index to evaluate the wear resistance of the electrode in micro-EDM | Tsai, Y.Y.; Masuzawa, T.; TsaiYY | Journal of Materials Processing Technology | |||
88 | 2004 | An index to evaluate the wear resistance of the electrode in micro-EDM | Tsai, Y.-Y.; YAO-YANG TSAI | Journal of Materials Processing Technology | 132 | 113 | |
89 | 2003 | The effects of various ceramic-metal on wear performance of clad layer | Wang, S.W.; Lin, Y.C.; YAO-YANG TSAI | Journal of Materials Processing Technology | 38 | 36 | |
90 | 2002 | マイクロ放電加工における電極消耗の特徵 | 蔡 曜陽; ??隆久; 藤野正俊; YAO-YANG TSAI | 生產研究 | |||
91 | 2002 | The Electrode Wear in Micro EDM | Y. Y. Tsai; YAO-YANG TSAI | ||||
92 | 2001 | Investigations on Electrode Wear in Micro-EDM | 蔡曜陽; YAO-YANG TSAI | Proceedings of the International Symposium for Electromachining | |||
93 | 1999 | Wear characteristics in turning high hardness alloy steel by ceramic and CBN tools | Luo, S.Y.; Liao, Y.S.; YAO-YANG TSAI ; YUNN-SHIUAN LIAO | Journal of Materials Processing Technology | 151 | 120 | |
94 | - | 奈米碳管之製作設備及其製作方法 | 蔡曜陽 | ||||
95 | - | 表面處方理方法及其裝置 | 蔡曜陽 | ||||
96 | - | 表面拋光效果之方法及其裝置 | 蔡曜陽 |