| 公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 |
1 | 2023 | A Lower Limb Rehabilitation Assistance Training Robot System Driven by an Innovative Pneumatic Artificial Muscle System | Tsai, Tsung Chin; MAO-HSIUNG CHIANG | Soft robotics | 5 | 5 | |
2 | 2023 | Dynamic Co-Simulation Analysis and Control of an IEA 15 MW Offshore Floating Semi-Submersible Wind Turbine under Taiwan Offshore-Wind-Farm Conditions of Wind and Wave | Chueh, Cherng Jer; Chien, Chun Hung; Lin, Ching; Lin, Ting Yan; MAO-HSIUNG CHIANG | Journal of Marine Science and Engineering | 1 | 0 | |
3 | 2022 | Dynamic Simulation and Control of a Semi-submersible Floating Offshore Wind Turbine with a Direct-Driving Permanent Magnetic Synchronized Generator | MAO-HSIUNG CHIANG ; Lin, Ching; Chien, Chun Hung; Kai-Tung (KT) Ma ; SHUN-HAN YANG ; Chen, Kuan Yu; Chueh, Cherng Jer | Proceedings of the 2022 8th International Conference on Applied System Innovation, ICASI 2022 | 0 | 0 | |
4 | 2022 | Development of an Offshore Turbine Access System with Four-Axial Active Motion Compensation | Huang, Guan Ying; Lin, Sheng Chia; MAO-HSIUNG CHIANG | Proceedings of the 2022 8th International Conference on Applied System Innovation, ICASI 2022 | 1 | 0 | |
5 | 2021 | IMPLEMENTATION OF A THREE-AXIAL OFFSHORE TURBINE ACCESS SYSTEM WITH ACTIVE MOTION COMPENSATION USING FEEDBACK LINEARIZATION CONTROL | Lee, F. C.; Lin, S. C.; MAO-HSIUNG CHIANG | Journal of Taiwan Society of Naval Architects and Marine Engineers | 0 | | |
6 | 2020 | Design and control of a 1-DOF robotic lower-limb system driven by novel single pneumatic artificial muscle | Tsai, T.-C.; Chiang, M.-H.; MAO-HSIUNG CHIANG | Applied Sciences (Switzerland) | | | |
7 | 2019 | Development of a neural network model for soh of LiFePO4 batteries under different aging conditions | Kuo, T.J.; Lee, K.Y.; Chiang, M.H.; MAO-HSIUNG CHIANG | IOP Conference Series: Materials Science and Engineering | | | |
8 | 2019 | Simulation and experiment of a turbine access system with three-axial active motion compensation | Chen, B.-Y.; Chiang, M.-H.; MAO-HSIUNG CHIANG | Ocean Engineering | | | |
9 | 2019 | Remote Sensing Image Registration Based on Modified SIFT and Feature Slope Grouping | Chang, Herng-Hua; Wu, Guan-Long; HERNG-HUA CHANG ; MAO-HSIUNG CHIANG | Ieee Geoscience and Remote Sensing Letters | 0 | 39 | |
10 | 2018 | Development of proportional pressure control valve for hydraulic braking actuator of automobile ABS | Chen, C.-P.; Chiang, M.-H.; MAO-HSIUNG CHIANG | Applied Sciences (Switzerland) | | | |
11 | 2018 | Mathematical simulations and analyses of proportional electro-hydraulic brakes and anti-lock braking systems in motorcycles | Chen, C.-P.; Chiang, M.-H.; MAO-HSIUNG CHIANG | High-Throughput | | | |
12 | 2017 | Path Tracking Control for Single-Axial Dual Pneumatic Muscle Actuators | Chiang, M.-H.; Chen, Y.-N.; Chen, C.-P.; Chang, C.-W.; MAO-HSIUNG CHIANG | Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C | | | |
13 | 2017 | Development of an Active-Controlled Side Stone Dumping System for Taiwan Offshore Wind Farms | 陳柏延(Bo-Yen Chen); 江茂雄(Mao-Hsiung Chiang); 陳義男(Yih-Nan Chen); 黃俊家(Chun-Chia Huang); 江茂雄 | 中國機械工程學刊 | | | |
14 | 2016 | The integration of the image sensor with a 3-DOF pneumatic parallel manipulator | Lin, H.-T.; Chiang, M.-H.; MAO-HSIUNG CHIANG | Sensors (Switzerland) | | | |
15 | 2016 | A novel dynamic co-simulation analysis for overall closed loop operation control of a large wind turbine | Wang, C.-S.; Chiang, M.-H.; MAO-HSIUNG CHIANG | Energies | | | |
16 | 2016 | Tracking control of a magnetic shape memory actuator using an inverse preisach model with modified fuzzy sliding mode control | Lin, J.-H.; Chiang, M.-H.; MAO-HSIUNG CHIANG | Sensors (Switzerland) | | | |
17 | 2016 | Development of a PMSG-based Wind Turbine Modeling by ADAMS, FAST and MATLAB | Wu, Y.-K.; Hu, Y.-L.; Chiang, M.-H.; MAO-HSIUNG CHIANG | Energy Procedia | | | |
18 | 2016 | A novel pitch control system of a large wind turbine using two-degree-of-freedom motion control with feedback linearization control | Wang, C.-S.; Chiang, M.-H.; MAO-HSIUNG CHIANG | Energies | | | |
19 | 2015 | Squat and standing motion of a single robotic leg using pneumatic artificial muscles | Lee, I.-F.; Lin, C.-I.; Wu, H.-C.; Wu, L.-C.; Lin, P.-C.; Chiang, M.-H.; PEI-CHUN LIN ; MAO-HSIUNG CHIANG ; WEN-PIN SHIH | Journal of Applied Science and Engineering | 5 | 0 | |
20 | 2015 | Development of a DFIG-based wind turbine modelling by using ADAMS, FAST, and matlab | Wu, Y.-K.; Hu, Y.-L.; Chiang, M.-H.; MAO-HSIUNG CHIANG | IET Seminar Digest | | | |
21 | 2015 | Hysteresis analysis and positioning control for a magnetic shape memory actuator | Lin, J.-H.; Chiang, M.-H.; MAO-HSIUNG CHIANG | Sensors (Switzerland) | | | |
22 | 2014 | Feedback linearization control for a wind turbine driven by a variable-speed pump-controlled hydraulic servo system | Chiang, M.-H.; Wang, C.-S.; Liu, J.; MAO-HSIUNG CHIANG | IEEE International Conference on Control and Automation | | | |
23 | 2014 | A positioning actuator of magnetic shape memory alloys based on fuzzy sliding mode control | Chiang, M.-H.; Lin, J.-H.; MAO-HSIUNG CHIANG | IEEE International Conference on Control and Automation | | | |
24 | 2014 | Adaptive fuzzy controller with self-tuning fuzzy sliding-mode compensation for position control of an electro-hydraulic displacement-controlled system | Chiang, M.-H.; Lee, L.-W.; Liu, H.-H.; MAO-HSIUNG CHIANG | Journal of Intelligent and Fuzzy Systems | | | |
25 | 2013 | Signed-distance fuzzy sliding mode position control for an energy-saving electro-hydraulic control system | Chiang, M.-H.; Chen, C.-C.; Lee, L.-W.; Jiang, M.-C.; Lin, J.-H.; MAO-HSIUNG CHIANG | Applied Mechanics and Materials | | | |
26 | 2013 | Simulation and control for load change process on a solid oxide fuel cell | Yu, D.-D.; Chiang, M.-H.; MAO-HSIUNG CHIANG | Applied Mechanics and Materials | | | |
27 | 2012 | Temperature control of solid oxide fuel cell using a reference model during load-tracking process | Chiang, M.-H.; Yu, D.-D.; MAO-HSIUNG CHIANG | Advanced Science Letters | | | |
28 | 2012 | Kinematic modeling of a 3-DOF translational parallel manipulator | Chiang, M.-H.; Lin, H.-T.; MAO-HSIUNG CHIANG | Advanced Science Letters | | | |
29 | 2012 | The leveling position control of a four-axial active pneumatic isolation system using PWM-driving parallel dual-on/off valves | Chiang, M.-H.; Lin, H.-T.; MAO-HSIUNG CHIANG | Applied Mechanics and Materials | | | |
30 | 2012 | Intelligent position control of a variable rotational speed hydraulic pump-controlled system | Chiang, M.-H.; Wu, B.-Y.; MAO-HSIUNG CHIANG | Advanced Science Letters | | | |
31 | 2012 | Intelligent Pitch Control for a 2MW Wind Turbine | Chiang, Mao-Hsiung ; Wang, Ching-Sung; Chen, Chang-Sheng | International Journal of Fuzzy Systems | | | |
32 | 2012 | Dynamic Simulation and Control Strategy Development for Safe and Fast Start-up on Solid Oxide Fuel Cell | Chiang, Mao-Hsiung ; Yu, Dung-Di; Chen, Yih-Nan | The Journal of the Chinese Society of Mechanical Engineers | | | |
33 | 2011 | Development of a Stereo Vision Measurement System for a 3D Three-Axial Pneumatic Parallel Mechanism Robot Arm | Chiang, Mao-Hsiung ; Lin, Hao-Ting; MAO-HSIUNG CHIANG | Sensors | 41 | 33 | |
34 | 2011 | Development of a 3D Parallel Mechanism Robot Arm with Three Vertical-Axial Pneumatic Actuators Combined with a Stereo Vision System | MAO-HSIUNG CHIANG ; Lin, Hao Ting | Sensors | 19 | 16 | |
35 | 2011 | The velocity control of an electro-hydraulic displacement-controlled system using adaptive fuzzy controller with self-tuning fuzzy sliding mode compensation | MAO-HSIUNG CHIANG | Asian Journal of Control | 20 | 16 | |
36 | 2011 | The force control of a novel variable rotational speed hydraulic pump-controlled system using adaptive fuzzy controller with self-tuning fuzzy sliding-mode compensation | Chiang, M.-H.; Lin, H.-T.; MAO-HSIUNG CHIANG | IFAC Proceedings Volumes | | | |
37 | 2011 | A novel pitch control system for a wind turbine driven by a variable-speed pump-controlled hydraulic servo system | MAO-HSIUNG CHIANG | Mechatronics | 107 | 94 | |
38 | 2010 | 固態氧化物燃料電池之起機模式模擬分析與控制 | 江茂雄 ; 余冬帝 | | | | |
39 | 2010 | Development of X-Y Servo Pneumatic-Piezoelectric Hybrid Actuators for Position Control with High Response, Large Stroke and Nanometer Accuracy | MAO-HSIUNG CHIANG | Sensors | 21 | 17 | |
40 | 2010 | Development of three dimensional parallel mechanism robot with pneumatic system | Chiang, M.-H.; Lin, H.-T.; MAO-HSIUNG CHIANG | IFAC Proceedings Volumes | | | |
41 | 2009 | Uninterrupted production of metal coils by making successive joints with roll bonding technique | Huang, C.-C.; Chiang, M.-H.; Jeffrey Kuo, C.-F.; Chen, Y.-N.; Yeh, A.-C.; MAO-HSIUNG CHIANG | Materials Transactions | | | |
42 | 2009 | The high response and high efficiency velocity control of a hydraulic injection molding machine using a variable rotational speed electro-hydraulic pump-controlled system | Chiang, M.-H.; Chen, C.-C.; Kuo, C.-F.J.; MAO-HSIUNG CHIANG | International Journal of Advanced Manufacturing Technology | | | |
43 | 2009 | Protections against surface discoloration of nickel silver plates | Huang, C.-C.; Jeffrey Kuo, C.-F.; Chiang, M.-H.; Yeh, A.-C.; MAO-HSIUNG CHIANG | Materials Transactions | 1 | 1 | |
44 | 2008 | 氣壓平衡式7.5代平面顯示器玻璃基板升降系統設計分析及伺服定位控制之研究 | 江茂雄 ; 陳偉杰; 謝宏村; 江友良 | | | | |
45 | 2008 | The High Response and High Efficiency Velocity Control of a Hydraulic Injection Moulding Machine Using a Variable Rotational Speed Electro-Hydraulic Pump-Controlled System | Chiang, Mao-Hsiung ; CHEN, Chung-Chieh; Kuo, Chung-Feng Jeffrey | International Journal of Advanced Manufacturing Technology | | | |
46 | 2008 | 現代光機電技術於先進汽車之應用 | 江茂雄 | | | | |
47 | 2008 | Velocity control for a variable displacement hydraulic servo system using adaptive fuzzy sliding-mod | Chiang, M.-H.; Lee, L.-W.; Chen, C.-C.; Liu, H.-H.; MAO-HSIUNG CHIANG | IFAC Proceedings Volumes (IFAC-PapersOnline) | | | |
48 | 2007 | 固態氧化物燃料電池起機模式策略制定 | 江茂雄 | | | | |
49 | 2007 | 離岸型風力發電機葉片設計之研究-離岸型風力發電機葉片機電控制系統之研究 (新制多年期第1年) | 江茂雄 | | | | |
50 | 2007 | 高性能液壓伺服控制系統設計及CAE工程分析 | 江茂雄 | | | | |
51 | 2007 | 以壓電致動器提昇傳統液壓伺服系統性能之研究 | 江茂雄 | | | | |
52 | 2007 | Adaptive fuzzy sliding-mode control for variable displacement hydraulic servo system | Chiang, M.-H.; Lee, L.-W.; Liu, H.-H.; MAO-HSIUNG CHIANG | IEEE International Conference on Fuzzy Systems | | | |
53 | 2006 | Design and testing of a multi- electrode electro-rheological damper | Kuo, W.H.; Wu, T.N.; Guo, J.; 江茂雄 ; Chen, Y.N. | Journal of Sound and Vibration | | | |
54 | 2006 | Design and performance evaluation of a serial multi-electrode electrorheological damper | Kuo, W.-H.; Wu, T.-N.; Guo, J.; Chiang, M.-H.; JEN-HWA GUO ; MAO-HSIUNG CHIANG | Journal of Sound and Vibration | 12 | 9 | |
55 | 2005 | Development of a hydraulic-piezoelectric-actuator for hybrid positioning control with large stroke, high loading and sub-micrometer accuracy | Chiang, M.-H.; Lee, L.-W.; Huang, K.-S.; MAO-HSIUNG CHIANG | 2005 IEEE International Conference on Mechatronics | | | |
56 | 2005 | Integrated control of clamping force and energy-saving in hydraulic injection moulding machines using decoupling fuzzy sliding-mode control | Chiang, M.H.; Yeh, Y.P.; Yang, F.L.; Chen, Y.N.; MAO-HSIUNG CHIANG | International Journal of Advanced Manufacturing Technology | | | |
57 | 2005 | Large stroke and high precision pneumatic-piezoelectric hybrid positioning control using adaptive discrete variable structure control | Chiang, M.-H.; Chen, C.-C.; Tsou, T.-N.; MAO-HSIUNG CHIANG | Mechatronics | | | |
58 | 2004 | Experimental implementation of complex path tracking control for large robotic hydraulic excavators | Chiang, M.-H.; Huang, C.-C.; MAO-HSIUNG CHIANG | International Journal of Advanced Manufacturing Technology | | | |
59 | 2004 | The concurrent implementation of high velocity control performance and high energy efficiency for hydraulic injection moulding machines | Chiang, M.H.; Lee, L.W.; Tsai, J.J.; MAO-HSIUNG CHIANG | International Journal of Advanced Manufacturing Technology | | | |
60 | 2003 | Parallel control velocity control and energy-saving control for a hydraulic valve-controlled cylinder system using self-organizing fuzzy sliding model control | Chiang, M.-H.; Chien, Y.-W.; MAO-HSIUNG CHIANG | JSME International Journal, Series C: Mechanical Systems, Machine Elements and Manufacturing | | | |
61 | 1993 | 垂直負載電液伺服系統之加速度可變結構適應性模式追蹤控制 | 陳義男; 李春伯; 江茂雄 | 國立臺灣大學工程學刊 | | | |