dc.relation.reference | [1] G. Gonzalez, Microwave Transistor Ampli ers Analysis and Design, Prentice Hall, 1997.
[2] B. Razavi, RF Microelectronics, Prentice Hall, 1998.
[3] U. L. Rohde and D. P. Newkirk, RF/Microwave Circuit Design for Wireless Applica-
tions, Wiley, 2000.
[4] F. Giannini and G.Leuzzi, Nonlinear Microwave Circuit Design, Wiley, 2004.
[5] B. Razavi, Design of Analog CMOS Integrated Circuits. McGraw-Hill, 2001.
[6] K. L. Fong and R. G. Meyer, Monolithic RF active mixer design," IEEE Trans. Circuit.
Syst., vol. 46, no.3, pp. 231-239, March 1999.
[7] M. L. Her, P. F. Teo, and F. H. Kung, Design and analysis for three applications of
90-degree single balanced mixe," Proc. ICCS, vol. 1, pp. 25-28, Nov. 2002.
[8] M. F. Ain, M. J. Lancaster, and P. Gardner,Design of L-band microwave oscillators,"
IEEE High-Freq, Postgrad. Student Colloq., pp. 19-24, Sept. 2001.
[9] C. C. Huang and T. H. Chu, Analysis of MESFET injection-locked oscillators in funda-
mental mode of operation," IEEE Trans. Microwave Theory Tech., vol.42, pp.1851-1857,
Oct. 1994.
58
BIBLIOGRAPHY 59
[10] Y. T. Lee, J. Lee and S. Nam,A new phase noise reduction method of oscillator by
loaded Q improvement using dual feedback topology," IEEE Microwave Wireless Comp.
Lett., vol.15, pp.39-41, Jan. 2005.
[11] Y. Tajima, GaAs FET applications for injection-locked oscillators and self-oscillating
mixers,"IEEE Trans. Microwave Theory Tech. vol.7, pp.629-632, July 1979.
[12] The Linh Nguyen, Injection-locked oscillator as frequency multiplier for millimeter-
wave applications," GaAs IC Symp., pp.245-248, Oct. 1999.
[13] Y. Jun, M.Q. Lee, Y. Lee, and S. Nam, A New design approach for an injection-
locked oscillator with an enhanced locking range,"Microwave Opt. Technol. Lett., vol.31,
pp.325-327, Dec. 2001.
[14] Y. H. Lin and Y. J. Chan, 2.4 GHz single balanced diode mixer fabricated on Al2O3
substrate,"Asia-Paci c Microwave Conf., vol.2, pp.218-221, Nov. 1999.
[15] K. B. Kim, T. S. Yun, J. C. Lee, A single balanced diode mixer with defected ground
structure lowpass lter" Eur. Microwave Conf., vol. 1, pp.197-200, Oct. 2004.
[16] Chan, Design of a 5-6 GHz single balanced schottky diode mixer," Asia-Paci c Conf.
Appl. Electromag., pp.67-71, Aug. 2003.
[17] K. W. Chang, T. H. Chen, and S. A. Mass, Frequency upconversion behavior of singly
balanced diode mixers," IEEE AP-S Int. Symp., pp. 222-225, June 1991.
BIBLIOGRAPHY 60
[18] R. N. Simons and P. G. Neudeck, Intermodulation-distortion performance of silicon-
carbide schottky-barrier RF mixer diodes," IEEE Trans. Microwave Theory Tech., vol.
51, pp.669-672, Feb. 2003.
[19] J. Eriksson, N. Rorsman, F. Ferdos, and H. Zirath, Design and characterisation of
singly balanced silicon carbide Schottky diode high-level mixer," Electron. Lett., vol.37,
pp. 54-55, Jan. 2001.
[20] Y. T. Lee, J. S. Lim, C. S. kim, D. Ahn, and S. Nam A compact-size microstrip spiral
resonator and its application to microwave oscillator," Microwave Wireless Comp. Lett.,
vol.12, pp. 375-377, Oct. 2002.
[21] Y. T. Lee, J. S. Lim, C. S. kim, D. Ahn, and S. Nam A novel phase noise reduction
technique in oscillators using defected ground structure," Microwave Wireless Comp.
Lett., vol.12, pp.39-41, Feb., 2002.
[22] Y. T. Lee, J. Lee, and S. Nam, High-Q active resonators using ampli ers and their
applications to low phase-noise free-running and voltage-controlled oscillators," IEEE
Trans. Microwave Theory Tech., vol.52, pp.2621-2626, Nov., 2004.
[23] Y. Cheng, K. Czuba, and G. Kompa, K-band phase locked hair-pin oscillator," IEEE
Int. Symp. Circuits Syst. vol.4, pp.381-384, May 2002.
[24] M. Sagawa, K. Takahashi, and M. Makimoto, Miniaturized hairpin resonator lters and
their application to receiver front-end MICs," IEEE Trans. Microwave Theory Tech.,
vol.37, pp. 1991-1997, Dec. 1989.
[25] S. Long, Fundamentals of mixer design," Agilent Design Seminar, Apr. 2001. | en |