DC 欄位 | 值 | 語言 |
dc.contributor | 李允中 | en |
dc.contributor | 臺灣大學:生物產業機電工程學研究所 | zh_TW |
dc.contributor.author | 陳栢宏 | zh |
dc.contributor.author | Chen, Bo-Hung | en |
dc.creator | 陳栢宏 | zh |
dc.creator | Chen, Bo-Hung | en |
dc.date | 2007 | en |
dc.date.accessioned | 2007-11-26T05:34:20Z | - |
dc.date.accessioned | 2018-07-10T03:44:46Z | - |
dc.date.available | 2007-11-26T05:34:20Z | - |
dc.date.available | 2018-07-10T03:44:46Z | - |
dc.date.issued | 2007 | - |
dc.identifier | zh-TW | en |
dc.identifier.uri | http://ntur.lib.ntu.edu.tw//handle/246246/52859 | - |
dc.description.abstract | 蒸餾的研究應用廣泛使用於近代的各類形式酒精蒸餾器,但直到現在,應用於烈酒蒸餾的領域中,壺型蒸餾器仍舊是批次蒸餾形式中最佳的機型,在壺形蒸餾器中使用鵝頸來自然冷卻回流製做出優良的烈酒,本實驗中不同於其他蒸餾器將表面設計成絕熱狀態,而是利用一個填充塔蒸餾器的結構來改善壺形蒸餾器,填充塔蒸餾器提供大量的接觸表面作為較好質傳效果,而且設計成可以控制蒸餾器的區段溫度,以達到類似壺形蒸餾器的操作方法,蒸餾器設計成擁有一套溫度控制系統,而蒸餾塔的空間也被分割成四個區塊,每個區塊都有環繞著水套,溫度控制系統利用水套溫度來控制蒸餾器各區塊的溫度值,系統利用溫度感測器(PT100)來量測水溫,並使用圖控制語言LabVIEW來完成溫度控制,系統控制結果可以讓蒸餾器的每個區塊的溫度維持與其設定目標值相差1.5℃,論文中還利用熱傳與質傳來推導蒸餾塔的數學模型,並用Simulink程式來模擬,數值模擬所得到的結果與實驗資料吻合,此初步的數學模型可用來作為設計控制的基礎,以縮小溫度控制系統的控制誤差。 | zh_TW |
dc.description.abstract | Although distillation has been extensively studied and resulted in various types of modern distills. But up to now pot still is still considered as the best type of batch still used in spirits distillation industry. Goose neck (Alembic) on top of the pot is the enrich section in the still, natural cooling privies reflux that is crucial to quality of spirits. It is very different to other industrial distiller that usually with an adiabatic enrich section. In our laboratory a packed bed distiller was design and constructed to be the improvement for pot still. The packed bed distiller provided great amount of contact area for better mass transfer effects, and controllable temperature field to be similar to pot still operating conditions. In this thesis the temperature control system for the distiller was design and studied. The enrich section of the distiller was divided into four stages; each stage was surrounded with water jack to control the operation temperature to the setting values. The operating temperature in each section was measured with a PT100 thermal couple, and the temperature was controlled by a virtual controller programmed with LABView. The control system could maintain the temperature in each section to the set goal within the error of 1.5℃. A mathematical model based on heat and mass transfers in distiller was developed and implemented with Simulink program. The numerical simulations gave consistent results to experiment data. Based on this primary study to use the mathematical model to design a better control schema for the system to minimize the control error was suggested. | en |
dc.description.tableofcontents | 目錄
誌謝 i
摘要 ii
ABSTRACT iii
目錄 iv
圖目錄 vi
表目錄 viii
符號說明 ix
第ㄧ章 前言 1
第二章 研究目的 2
第三章 文獻探討 3
3.1 蒸餾酒 3
3.2板層塔蒸餾 4
3.2.1 板層塔蒸餾器數學模型 5
3.2.2 板層塔模擬分析 6
3.3 填充塔蒸餾 7
3.3.1 填充塔模擬分析 9
第四章 實驗設備 12
4.1 蒸餾器 12
4.2 循環水供應系統 13
第五章 蒸餾器的儀器與控制 16
5.1 溫度感測器 16
5.2 蒸餾器的控制 17
5.2.1 控制邏輯設計 17
5.2.2 控制驅動介面 19
5.3 控制器程式設計 19
5.3.1 溫度量測程式設計 19
5.3.2 循環水溫度控制 20
5.3.3 程式中斷輸出保護程式 23
5.3.4 蒸餾實驗記錄儲存 24
5.4蒸餾測試 25
第六章 蒸餾系統模擬 26
6.1 蒸餾器數學建模 26
6.2 蒸餾模型簡化 32
6.3 蒸餾系統模擬 34
第七章 結果與討論 39
7.1循環水效能結果與討論 39
7.2蒸餾模擬結果與討論 47
第八章 結論 52
參考文獻 53 | zh_TW |
dc.format.extent | 1404980 bytes | - |
dc.format.mimetype | application/pdf | - |
dc.language | zh-TW | en |
dc.language.iso | en_US | - |
dc.subject | 填充塔蒸餾器 | en |
dc.subject | 批次蒸餾器 | en |
dc.subject | 蒸餾酒 | en |
dc.subject | 蒸餾模擬 | en |
dc.subject | packed bed distiller | en |
dc.subject | batch still | en |
dc.subject | fruit brandy | en |
dc.subject | distillation simulation | en |
dc.title | 批次酒精蒸餾器的溫度控制 | zh |
dc.title | Temperature Control of a Batch Alcohol Distiller | en |
dc.type | thesis | en |
dc.identifier.uri.fulltext | http://ntur.lib.ntu.edu.tw/bitstream/246246/52859/1/ntu-96-R94631018-1.pdf | - |
dc.relation.reference | 參考文獻
1.王立中。1994。填充式蒸餾塔非線性模式預測控制。碩士論文。新竹:國立清華大學化學工程研究所。
2.河東準、岡田功。1991。最新蒸餾理論計算。二版,479-508。台南:復漢出板社。
3.邱立中。2004。製酒用小型填充塔蒸餾器研究。碩士論文。台北:國立台灣大學生物產業機電工程學研究所。
4.林志銘。1999。非線性PI控制在高純度蒸餾塔之應用。碩士論文。台北:國立台灣大學化學工程學研究所。
5.胡鳳綬。1987。蒸餾酒中香味成份子由來及共組織。製酒科技專論彙編9:320-327
6.陳秋風。1979。填充式蒸餾塔之動態與DUC-II微處理機控制。碩士論文。台北:國立臺灣大學化學工程學硏究所。
7.張明哲。1993。批次蒸餾程序之塊集區域模式。碩士論文。台北:國立臺灣大學化學工程學硏究所。
8.黃正雄。1997。蒸餾塔內件的發展。化工技術 5(4):138-141。
9.黃湘霖。2005。蒸餾塔即時動態模擬視窗程式設計。碩士論文。台北:國立台北科技大學化學工程研究所。
10.蔡坤榮、谷家嵩、林龍雄、蕭秀雄。1996。蒸餾複合塔內件之研發。化工技術 4(10):140-147。
11.鄭西顯、紀順利。1995。填充式蒸餾塔之模式預測模擬及實驗。化工技術 3(1):125-135。
12.羅豐治。1987。網狀填充物蒸餾塔動態模擬。碩士論文。桃園:國立中央大學化學工程研究所。
13.Bozic, S. M. 1979. Digital and Kalman Filtering.2nd ed.,193-235. London:E. Amold.
14.Skogestad, S. and T. Mejedll. 1991. Composition Estimator in a Pilot-Plant Distillation Column Using Multiple Temperatures. Ind. Eng. Chem. Res. 30 (12) .2555-2564
15.Treybal, R.E. 1968. Mass-transfer operations. New York. McGraw-Hill.
16.Venkateswarlu, C. and S. Avantika. 2001. Optimal State Estimation of Multicomponent Batch Distillation. Chemical Engineering science. 56 (3): 5771 - 5786.
17.Yu, C.C. and W.L.Luyben. 1984. Use of Multiple Temperatures for the Control of Multicomponent Distillation Columns. Ind. Eng. Chem. Process Des. Dev. 23 (3), 590-597 | zh_TW |
item.cerifentitytype | Publications | - |
item.languageiso639-1 | en_US | - |
item.openairetype | thesis | - |
item.fulltext | with fulltext | - |
item.grantfulltext | open | - |
item.openairecristype | http://purl.org/coar/resource_type/c_46ec | - |
顯示於: | 生物機電工程學系
|