https://scholars.lib.ntu.edu.tw/handle/123456789/370811
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.author | Smith, S. | en_US |
dc.contributor.author | Smith, G. | en_US |
dc.contributor.author | Chen, W.-H. | en_US |
dc.contributor.author | SHANA SMITH | en_US |
dc.creator | SHANA SMITH;Chen, W.-H.;Smith, G.;Smith, S. | - |
dc.date.accessioned | 2018-09-10T09:18:54Z | - |
dc.date.available | 2018-09-10T09:18:54Z | - |
dc.date.issued | 2012 | - |
dc.identifier.uri | http://www.scopus.com/inward/record.url?eid=2-s2.0-84859626393&partnerID=MN8TOARS | - |
dc.identifier.uri | http://scholars.lib.ntu.edu.tw/handle/123456789/370811 | - |
dc.description.abstract | Modern green products must be easy to disassemble. Specific target components must be accessed and removed for repair, reuse, recycling, or remanufacturing. Prior studies describe various methods for removing selective targets from a product. However, solution quality, model complexity, and searching time have not been considered thoroughly. The goal of this study is to improve solution quality, minimize model complexity, and reduce searching time. To achieve the goal, this study introduces a new 'disassembly sequence structure graph' (DSSG) model for multiple-target selective disassembly sequence planning, an approach for creating DSSGs, and methods for searching DSSGs. The DSSG model contains a minimum set of parts that must be removed to remove selected targets, with an order and direction for removing each part. The approach uses expert rules to choose parts, part order, and part disassembly directions, based upon physical constraints. The searching methods use rules to remove all parts, in order, from the DSSG. The DSSG approach is an optimal approach. The approach creates a high quality minimum-size model, in minimum time. The approach finds high quality, practical, realistic, physically feasible solutions, in minimum time. The solutions are optimized for number of removed parts, part order, part disassembly directions, and reorientations. The solutions remove parts in practical order. The solutions remove parts in realistic directions. The solutions consider contact, motion, and fastener constraints. The study also presents eight new design rules. The study results can be used to improve the product design process, increase product life-cycle quality, and reduce product environmental impact. © 2012 Elsevier Ltd. All rights reserved. | - |
dc.language | en | en |
dc.relation.ispartof | Advanced Engineering Informatics | en_US |
dc.source | AH | - |
dc.subject | Disassembly sequence structure graph; DSSG; Multiple target; Optimal; Selective disassembly sequence planning | - |
dc.subject.classification | [SDGs]SDG9 | - |
dc.subject.other | Disassembly sequence; DSSG; Multiple targets; Optimal; Selective-disassembly; Artificial intelligence; Information systems; Optimization | - |
dc.title | Disassembly sequence structure graphs: An optimal approach for multiple-target selective disassembly sequence planning | - |
dc.type | journal article | en |
dc.identifier.doi | 10.1016/j.aei.2011.11.003 | - |
dc.relation.pages | 306-316 | - |
dc.relation.journalvolume | 26 | - |
dc.relation.journalissue | 2 | - |
item.fulltext | no fulltext | - |
item.openairetype | journal article | - |
item.openairecristype | http://purl.org/coar/resource_type/c_6501 | - |
item.grantfulltext | none | - |
item.cerifentitytype | Publications | - |
crisitem.author.dept | Mechanical Engineering | - |
crisitem.author.orcid | 0000-0002-9999-488X | - |
crisitem.author.parentorg | College of Engineering | - |
顯示於: | 機械工程學系 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。