https://scholars.lib.ntu.edu.tw/handle/123456789/408284
標題: | Thermal stabilization of iron-rich sludge for high strength aggregates | 作者: | Tay J.-H. Show K.-Y. Hong S.-Y. Chien C.-Y. Lee D.-J. |
關鍵字: | Aggregates; Leaching; Marine clays; Sludge disposal; Thermal factors; Waste management | 公開日期: | 2003 | 卷: | 15 | 期: | 6 | 起(迄)頁: | 577-585 | 來源出版物: | Journal of Materials in Civil Engineering | 摘要: | A key task in wastewater sludge management is preventing sludge from polluting the environment. Sludge invariably poses risks to both public health and the environment whether incinerated or landfilled. Alternative reuses need to be explored in order to solve the disposal problems of sludge in an environmentally sound manner. This investigation examines the potential of using an industrial sludge and marine clay to produce aggregates for replacement of regular coarse aggregate in concrete. The waste mixes were pressed into layers and sintered at elevated temperatures resulting in a fused hard solid mass. During the sintering process, the peak rates of weight loss occurred at temperatures of 80-90, 280-520, and 900°C, indicating mass loss through evaporation and volatilization of organic and metallic substances, respectively. The sintered materials were crushed into required sizes for a range of construction aggregates exhibiting varying characteristics. Laboratory test results indicated that sludge-clay aggregates of up to 20% clay content displayed better aggregate impact resistance of 23.1-28.8% Aggregate impact value (AIV) compared with 28.3-38.9% AIV for the control granite aggregate. Sodium salt and sintering temperature have significant influence on the product density. Concrete cast with the sludge-clay aggregates yielded compressive strengths ranging from 34.0 to 39.0 N/mm2, while the sludge aggregates of 0 and 20% clay content produced concrete stronger than those cast with conventional granite aggregate. Leaching test results showed that the concentrations of the toxic elements leached from the aggregates were within acceptable levels, suggesting that the sludge-clay materials could possibly be used as concrete aggregates without detrimental effects to the environment. The experimental study indicated that conversion of the sludge and clay into construction aggregates could offer a feasible technical solution for waste management. |
URI: | https://scholars.lib.ntu.edu.tw/handle/123456789/408284 | ISSN: | 08991561 | DOI: | 10.1061/(ASCE)0899-1561(2003)15:6(577) | SDG/關鍵字: | Clay; Compressive strength; Concrete aggregates; Density (specific gravity); Environmental protection; Evaporation; Health hazards; Impact resistance; Land fill; Sintering; Thermodynamic stability; Wastewater treatment; Water pollution; Aggregate impact value (AIV); High strength aggregates; Sewage sludge; aggregate; industrial application; pollution control; sludge; waste disposal; waste management; wastewater treatment; clay; compressive strength; environmental health; high temperature; industrial sludge; soil aggregation; waste water; waste water management; water pollution |
顯示於: | 化學工程學系 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。