https://scholars.lib.ntu.edu.tw/handle/123456789/577151
標題: | The Biomechanical Response of the Lower Cervical Spine Post Laminectomy: Geometrically-Parametric Patient-Specific Finite Element Analyses | 作者: | Nikkhoo M Cheng C.-H Wang J.-L Niu C.-C Parnianpour M Khalaf K. JAW-LIN WANG |
關鍵字: | Biomechanics; Decision making; Diagnostic products; Motion compensation; Surgery; Biomechanical response; Informed decision; Intradiscal pressures; Lateral bending; Patient specific; Quantitative tool; Subject-specific; Surgical planning; Finite element method; Article; axial rotation; biomechanics; capsular ligament; cervical spine; clinical article; clinical decision making; clinical outcome; data analysis software; finite element analysis; geometry; human; interrater reliability; interspinous ligament; intervertebral disk; intrarater reliability; laminectomy; ligamentum flavum; lower cervical spine post laminectomy; posterior longitudinal ligament; quantitative analysis; range of motion; rotation; supraspinous ligament; X ray analysis | 公開日期: | 2021 | 卷: | 41 | 期: | 1 | 起(迄)頁: | 59-70 | 來源出版物: | Journal of Medical and Biological Engineering | 摘要: | Purpose: This study aimed to investigate the biomechanical impact of laminectomy on cervical intersegmental motion and load sharing using a parametric patient-specific finite element (FE) model towards providing clinicians with a viable quantitative tool for informed decision-making and improved surgical planning. Methods: Ten subject-specific nonlinear osteo-ligamentous cervical spine (C3–C7) FE models were developed using X-ray image-based algorithms. The models were used to evaluate the effect of laminectomy on lower cervical spine biomechanics for two-level (C3–C4) and three-level (C3–C5) laminectomy procedures. Results: The average cervical spine ranges of motion (ROM) for the pre-op models were 24.09 (± 8.65), 18.08 (± 7.48), 27.86 (± 6.82), and 33.18 (± 10.81) degrees, during flexion, extension, lateral bending, and axial rotation, respectively, in alignment with the literature. Post laminectomy increased the intersegmental ROM, disc stress, and intradiscal pressure at the upper cervical levels during sagittal plane motion and axial rotation, while the lower levels experienced the opposite trend, as compared with intact models. No significant changes were observed in facet joint forces after surgery. Conclusions: The current study used a parametric personalized FE modeling technique as a practical, clinically-applicable approach to predict cervical spine biomechanics post-surgical laminectomy. Altered biomechanical responses, both in terms of kinematics and kinetics, were observed, although more pronounced in models with fewer levels of laminectomy. Overall, a higher degree of motion compensation was observed at the higher levels of the cervical spine, regardless of the laminectomy level, which suggests increased spinal instability, potential risk of post-laminectomy kyphosis, and axial neck pain. ? 2020, Taiwanese Society of Biomedical Engineering. |
URI: | https://www.scopus.com/inward/record.uri?eid=2-s2.0-85094203669&doi=10.1007%2fs40846-020-00579-8&partnerID=40&md5=f6fc8e551a06f1dc55da1be47c129f3a https://scholars.lib.ntu.edu.tw/handle/123456789/577151 |
ISSN: | 16090985 | DOI: | 10.1007/s40846-020-00579-8 |
顯示於: | 醫學工程學研究所 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。