https://scholars.lib.ntu.edu.tw/handle/123456789/598921
標題: | A two-dimensional piezoelectric traveling wave generator using a multi-integer frequency, two-mode method (MIF-TM) | 作者: | Hsu Y.-H Lin Y.-M YU-HSIANG HSU CHIH-KUNG LEE |
關鍵字: | gated two-frequency-two-mode method;linear motor;multi-integer frequency two-mode method;piezoelectric actuator;piezoelectric motor;traveling wave;two-frequency-two-mode;Analytical models;Linear motors;Natural frequencies;Piezoelectric motors;Piezoelectricity;Driving frequencies;Gated two-frequency-two-mode method;Multi-integer frequency two-mode method;Phase difference;Piezoelectric;Travelling waves;Two-frequency-two-mode;Two-mode methods;Wave generators;Piezoelectric actuators | 公開日期: | 2021 | 卷: | 30 | 期: | 12 | 來源出版物: | Smart Materials and Structures | 摘要: | In this paper, we report a new method called a multi-integer frequency, two-mode (MIF-TM) to generate multi-directional traveling waves on a square plate. The uniqueness of this driving method is threefold. Firstly, as the two driving frequencies are at or near resonant frequencies of the two bending modes, the driving efficiency can be largely enhanced by using structural resonance. Secondly, as the two actuating areas can sufficiently induce traveling waves, each of them is driven by one of the two driving frequencies. It is possible to generate steady traveling waves by making the two driving frequencies possess a multi-integer relationship and with a phase difference. Thirdly, the direction of the traveling wave can be controlled to propagate toward either the x- or y-direction by designing the location and size of the actuating area. To assist in the design of the MIF-TM traveling wave generator, an analytical model was derived to depict the induction of the traveling waves. Using this analytical model, we designed a piezoelectric traveling wave generator with weight of 2.35 g, dimension of 45 45 0.4 mm piezoelectric bimorph with four designated electrode pairs. It was verified to be either in the positive or negative direction traveling wave as it was controlled by adjusting the phase difference between the two driving frequencies. Our experimental results demonstrated that the generated x-direction traveling wave can move a 0.3 g object at a speed of 1.48 mm s-1, and the generated y-direction travel wave can move this same object at a speed of 1.36 mm s-1. The design, numerical analysis, finite element analysis, and experimental studies are detailed in this paper. ? 2021 IOP Publishing Ltd. |
URI: | https://www.scopus.com/inward/record.uri?eid=2-s2.0-85122486601&doi=10.1088%2f1361-665X%2fac3432&partnerID=40&md5=c96a7126fbdd4ba95dcc7626fe9caf28 https://scholars.lib.ntu.edu.tw/handle/123456789/598921 |
ISSN: | 09641726 | DOI: | 10.1088/1361-665X/ac3432 |
顯示於: | 應用力學研究所 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。