https://scholars.lib.ntu.edu.tw/handle/123456789/598931
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.author | Chang Y.-T | en_US |
dc.contributor.author | Hung K.-Y | en_US |
dc.contributor.author | Young H.-T | en_US |
dc.contributor.author | Li K.-M | en_US |
dc.contributor.author | Chen R.K. | en_US |
dc.contributor.author | KUAN-MING LI | en_US |
dc.creator | Chang Y.-T;Hung K.-Y;Young H.-T;Li K.-M;Chen R.K. | - |
dc.date.accessioned | 2022-03-22T08:28:43Z | - |
dc.date.available | 2022-03-22T08:28:43Z | - |
dc.date.issued | 2022 | - |
dc.identifier.issn | 02683768 | - |
dc.identifier.uri | https://www.scopus.com/inward/record.uri?eid=2-s2.0-85115604694&doi=10.1007%2fs00170-021-08046-7&partnerID=40&md5=18f68967ad5d7924dd87f5ac27c6e0d8 | - |
dc.identifier.uri | https://scholars.lib.ntu.edu.tw/handle/123456789/598931 | - |
dc.description.abstract | In this study, the ultraviolet (UV) radiation curing process and furnace curing process for curing aerosol jet printed nickel oxide (NiO) nanoparticle thin films were investigated. NiO has a negative temperature coefficient and can be used to fabricate temperature sensors. Four UV power settings (for 10?min) and four furnace temperatures (for 1?h) were used to cure the aerosol jet printed sensors. The resultant sensor resistance at 100?°C and 180?°C was measured, and the sensor’s sensitivity was characterized by a B value. Confocal microscopy was performed to characterize the sensor surface. The 60% UV power setting yields the lowest resistance and the highest B value among all sensors. The analysis of variations shows that the UV power setting is not a significant factor in the resistance and B value, while the furnace temperature is a significant factor. This indicates that UV curing is a more robust method and does not need to be optimized to achieve good results. The UV curing process not only reduces the required curing time but also improves the performance of the temperature sensor. ? 2021, The Author(s), under exclusive licence to Springer-Verlag London Ltd., part of Springer Nature. | - |
dc.relation.ispartof | International Journal of Advanced Manufacturing Technology | - |
dc.subject | 3D printing | - |
dc.subject | Aerosol jet printing | - |
dc.subject | Curing | - |
dc.subject | Thermistor | - |
dc.subject | 3D printers | - |
dc.subject | Aerosols | - |
dc.subject | Deposition | - |
dc.subject | Heat treating furnaces | - |
dc.subject | Nanoparticles | - |
dc.subject | Nickel oxide | - |
dc.subject | Oxide films | - |
dc.subject | Temperature | - |
dc.subject | Temperature sensors | - |
dc.subject | Thermistors | - |
dc.subject | Thin films | - |
dc.subject | 3-D printing | - |
dc.subject | 3D-printing | - |
dc.subject | Aerosol jet printings | - |
dc.subject | B value | - |
dc.subject | Curing process | - |
dc.subject | Furnace temperatures | - |
dc.subject | Nanoparticle inks | - |
dc.subject | Nickel oxide nanoparticle | - |
dc.subject | Power settings | - |
dc.subject | Ultraviolet radiation curing | - |
dc.title | Aerosol jet printing of nickel oxide nanoparticle ink with ultraviolet radiation curing for thin-film temperature sensors | en_US |
dc.type | journal article | en |
dc.identifier.doi | 10.1007/s00170-021-08046-7 | - |
dc.identifier.scopus | 2-s2.0-85115604694 | - |
dc.relation.pages | 1957-1965 | - |
dc.relation.journalvolume | 118 | - |
dc.relation.journalissue | 5-6 | - |
item.cerifentitytype | Publications | - |
item.fulltext | no fulltext | - |
item.openairecristype | http://purl.org/coar/resource_type/c_6501 | - |
item.openairetype | journal article | - |
item.grantfulltext | none | - |
crisitem.author.dept | Mechanical Engineering | - |
crisitem.author.dept | Center for Artificial Intelligence and Advanced Robotics | - |
crisitem.author.orcid | 0000-0002-2042-1692 | - |
crisitem.author.parentorg | College of Engineering | - |
crisitem.author.parentorg | Others: University-Level Research Centers | - |
顯示於: | 機械工程學系 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。