https://scholars.lib.ntu.edu.tw/handle/123456789/611901
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.author | Jywe W.-Y. | en_US |
dc.contributor.author | Hsieh T.-H. | en_US |
dc.contributor.author | Chen P.-Y. | en_US |
dc.contributor.author | Wang M.-S. | en_US |
dc.contributor.author | Wen-Yuh Jywe | en_US |
dc.creator | Jywe W.-Y.;Hsieh T.-H.;Chen P.-Y.;Wang M.-S. | - |
dc.date.accessioned | 2022-05-24T06:26:29Z | - |
dc.date.available | 2022-05-24T06:26:29Z | - |
dc.date.issued | 2018 | - |
dc.identifier.issn | 20763417 | - |
dc.identifier.uri | https://www.scopus.com/inward/record.uri?eid=2-s2.0-85055969338&doi=10.3390%2fapp8112130&partnerID=40&md5=e22a6dc0eaf9ae9be9dcf59a3d5297ec | - |
dc.identifier.uri | https://scholars.lib.ntu.edu.tw/handle/123456789/611901 | - |
dc.description.abstract | Vertical straightness errors are the key factor that affects the flatness of the workpiece during vertical machining. Traditionally, the individually measured and fitted vertical straightness errors of the X and Y axes are used to compensate the Z axis and, thus, obtain the flatness of the working table of the machine tool. However, it is difficult to measure and compensate the vertical straightness error of the desired position on the working table, not to mention the centroid variation effect of the working table on the measured data. In this study, an online dual-axis measurement system with repeatability (3σ) of 2.46 μm is developed to simultaneously measure X-axis and Y-axis straightness errors of the desired position of a working table. Furthermore, the measured data are utilized to establish a flatness error model to reduce the vertical straightness error of the working table such that the repeatability (3σ) of the measured flatness may be kept within a range of 0.65 μm. ? 2018 by the author. | - |
dc.relation.ispartof | Applied Sciences (Switzerland) | - |
dc.subject | Dual-axis; Flatness error model; Machine tools; Vertical straightness | - |
dc.title | An online simultaneous measurement of the dual-axis straightness error for machine tools | en_US |
dc.type | journal article | en |
dc.identifier.doi | 10.3390/app8112130 | - |
dc.identifier.scopus | 2-s2.0-85055969338 | - |
dc.relation.journalvolume | 8 | - |
dc.relation.journalissue | 11 | - |
item.fulltext | no fulltext | - |
item.cerifentitytype | Publications | - |
item.openairecristype | http://purl.org/coar/resource_type/c_6501 | - |
item.grantfulltext | none | - |
item.openairetype | journal article | - |
crisitem.author.dept | Mechanical Engineering | - |
crisitem.author.parentorg | College of Engineering | - |
顯示於: | 機械工程學系 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。