https://scholars.lib.ntu.edu.tw/handle/123456789/612014
Title: | Study using position silicon detectors for performance testing of computer numerically controlled machine tools | Authors: | Jywe W. Wen-Yuh Jywe |
Keywords: | Computer control systems;Control equipment;Cutting;Error analysis;Machining;Numerical control systems;Semiconductor lasers;Silicon sensors;Computer numerically controlled (CNC) machine tools;Machine tools | Issue Date: | 2002 | Journal Volume: | 216 | Journal Issue: | 5 | Start page/Pages: | 725-733 | Source: | Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture | Abstract: | In this paper, various contouring test systems for computer numerically controlled (CNC) machine tools are reviewed. It is the first time a laser diode and a quadrant sensor have been employed to build a simple contouring measuring system for testing dynamic performance of a CNC machine tool. The experimental work on a CNC machine tool with a Fanuc OM controller for various contouring paths under specified feed rates is carried out. Then, the compensation work is executed with the assistance of this developed contouring system. After the compensation, the contouring error, especially at a high feed rate and small radius, is reduced significantly. |
URI: | https://www.scopus.com/inward/record.uri?eid=2-s2.0-0036267428&doi=10.1243%2f0954405021520418&partnerID=40&md5=e8d869d1b07695b5caaef16ad4866afa https://scholars.lib.ntu.edu.tw/handle/123456789/612014 |
DOI: | 10.1243/0954405021520418 |
Appears in Collections: | 機械工程學系 |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.