https://scholars.lib.ntu.edu.tw/handle/123456789/638858
標題: | Mechanical performance of a novel low-cost Fe–25Mn–5Co-12.5Cr–5Ni-2.5Si (in at. %) medium-entropy alloy | 作者: | Lin, Kaifan Chen, Shih Che HUNG-WEI YEN HSIN-CHIH LIN |
關鍵字: | Cryogenic deformation | High-entropy alloy | Silicon addition | Solid solution strengthening | 公開日期: | 1-二月-2024 | 卷: | 892 | 來源出版物: | Materials Science and Engineering: A | 摘要: | This study presents a FCC crystal structure medium entropy alloy (MEA) with a nominal composition of Fe–25Mn–5Co-12.5Cr–5Ni-2.5Si (in at. %). The MEA deformed at room temperature exhibits superior mechanical performance compared to benchmark CoCrFeMnNi high entropy alloys (HEA). The empirical Hall-Petch equation was calculated with a high intrinsic strengthening coefficient of 335 MPa and a grain boundary strengthening coefficient of 634 MPa ∙μm−1/2. The deformed microstructure is comprised of planar and wavy dislocations and deformation twins. Cryogenic deformation results in an increase in mechanical strength, brought about by the complex deformed microstructure involving deformation twins and ε martensite laths. Addition of silicon to the alloy system increases the atomic misfit of the MEA and decreases the alloy's stacking fault energy (SFE) value, thereby activating the deformation mechanism of FCC-to-HCP martensitic phase transformation. Overall, the study concludes that MEA has the potential to be a more cost-effective alternative to expensive high entropy alloys. |
URI: | https://scholars.lib.ntu.edu.tw/handle/123456789/638858 | ISSN: | 09215093 | DOI: | 10.1016/j.msea.2023.146032 |
顯示於: | 材料科學與工程學系 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。