https://scholars.lib.ntu.edu.tw/handle/123456789/64105
標題: | Injection Molding of Ribbed Plastic Plates with a Superplastic Zn-22% Al Sheet | 作者: | Yang, S. Y. Parng, S. H. YangSY |
公開日期: | 2001 | 卷: | 20 | 期: | 3 | 起(迄)頁: | 216-225 | 來源出版物: | Advances in Polymer Technology | 摘要: | This article presents the development of a hybrid process combining the forming of a superplastic zinc-aluminum sheet with injection molding. The product is a plastic part covered with a superplastic zinc-aluminum layer used mainly for electromagnetic interference (EMI) shielding. This hybrid process involves not only molding a plastic plate, but also forming a superplastic zinc-aluminum sheet with features such as ribs. This research observes the process of filling the cavity and forming the superplastic sheet with the aid of short-shot experiments. By understanding the molding and forming process, guidelines for process control will be derived. This research further investigates the moldability of SIM systems. To make satisfactory parts, sheet thickness, melt temperature, injection parameters, and other process parameters determine the "moldability" of a specific system. The first part of the moldability study is to identify the relative importance of these process parameters. Results show that melt temperature and injection pressure are the two most critical parameters. The second part of this moldability study is to develop the moldability diagrams based on the molding area on the plane of these two key parameters. Moldability diagrams are employed to evaluate the effects of sheet thicknesses and melt inlets. It is found that a thick sheet, high melt temperature, and an inlet providing short flow length improve moldability. © 2001 John Wiley & Sons, Inc. Adv Polym Techn. |
URI: | http://ntur.lib.ntu.edu.tw//handle/246246/85966 https://www.scopus.com/inward/record.uri?eid=2-s2.0-0035450144&doi=10.1002%2fadv.1017&partnerID=40&md5=377408edc250476d40e43ac21c185f01 |
ISSN: | 07306679 | SDG/關鍵字: | Aluminum sheet; Injection molding; Metal forming; Pressure effects; Process control; Signal interference; Superplasticity; Thermal effects; Electromagnetic intereference (EMI) shielding; Plastic plates; Plastic products |
顯示於: | 機械工程學系 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。