https://scholars.lib.ntu.edu.tw/handle/123456789/68281
標題: | Study of wire breaking process and monitoring of WEDM | 作者: | Liao, Y. S. Chu, Y. Y. Yan, M. T. LiaoYS |
公開日期: | 1997 | 卷: | 37 | 期: | 4 | 起(迄)頁: | 555-567 | 來源出版物: | International Journal of Machine Tools and Manufacture | 摘要: | Wire rupture in the Wire Electrical Discharge Machining (WEDM) process is a serious problem to manufacturers. A new computer-aided pulse discrimination system based on the characteristics of voltage waveform during machining was developed in this paper. With the use of this system, a large amount of sparking frequency data during wire rupture process and under normal working conditions were collected and analyzed. Two symptoms of wire rupture were identified: the excess of arc sparks, and a sudden rise of the total sparking frequency. The governing mechanisms of these two types of wire rupture were found from the SEM and EDAX analyses of the ruptured wire electrode. Furthermore, an index to monitor wire breaking was identified, and its relationships with the metal removal rate and machining parameters were found. Based on the results obtained in the paper, a control strategy to prevent wire from rupturing while at the same time improving the machining speed is proposed. © 1997 Published by Elsevier Science Ltd. All rights reserved. |
URI: | http://ntur.lib.ntu.edu.tw//handle/246246/86995 https://www.scopus.com/inward/record.uri?eid=2-s2.0-0031117828&doi=10.1016%2fS0890-6955%2895%2900049-6&partnerID=40&md5=422b9e5fb7ebd896843f98973d35f03f |
ISSN: | 08906955 | SDG/關鍵字: | Adaptive control systems; Computer aided analysis; Electric sparks; Frequencies; Speed; Temperature; Thermal effects; Wire; Breaking; Wire electrical discharge machining; Wire rupture; Machining |
顯示於: | 機械工程學系 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。