公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 |
2010 | Research and design of an intelligent personal lightweight electric vehicle | Hsu, T.-T.; Lo, S.-Y.; Cheng, J.-H.; JUNG-HO CHENG | Sustainable Mobility Revolution: 25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium and Exhibition | | | |
2002 | Research and Reduction on Vibrational Noise of Gear Pump | Yu, S.Y.; Cheng, J.H.; JUNG-HO CHENG | Mechanics, Series B | | | |
2002 | The Research of the Process of Manufacturing Tires | Yang, H.Y.; Cheng, J.H.; JUNG-HO CHENG | Mechanics, Series B | | | |
1998 | Research on the Superplastic Forming (SPF) and Diffusion Bonding (DB) of aerospace materials | Chuang, Tung-Han; Cheng, Jung-Ho; Wang, Wen-Hsiung; Yang, Chih-Fu; Koo, Chun-Hao; JUNG-HO CHENG | Proceedings of the National Science Council, Republic of China, Part A: Physical Science and Engineering | | | |
2005 | Silicon-based high-frequency multiple-fourier horn ultrasonic nozzles for atomization and pumping | Tsai, C.S.; Song, Y.L.; Tsai, S.C.; Chou, Y.F.; Cheng, J.H.; JUNG-HO CHENG | IEEE Sensors | | | |
2013 | Study of different arrangement of magnets for the purpose of reducing magnet usage in designing an integrated starter/generator for hybrid vehicles | Hsueh, K.-F.; Cheng, J.-H.; Chen, Y.-S.; JUNG-HO CHENG | SAE Technical Papers | 0 | 0 | |
2020 | Study of the Influence of Carcass Temperature on Rolling Resistance | 郭庭瑋(Ting-Wei Guo); 鄭榮和(Jung-Ho Cheng); 鄭榮和 | 中國機械工程學刊 | | | |
2003 | Study on welding residual distortions of parts in gas turbines | Hu, S.-Y.; Cheng, J.-H.; JUNG-HO CHENG | Zhongguo Hangkong Taikong Xuehui Huikan/Transactions of the Aeronautical and Astronautical Society of the Republic of China | | | |
1993 | Superplastic forming model applications for al-li 8090 | Lee, S.; Cheng, J.-H.; Lee, J.; JUNG-HO CHENG | Journal of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an | | | |
2001 | The analysis of instability and strain concentration during superplastic deformation | Chung, L.C.; Cheng, J.-H.; JUNG-HO CHENG | Materials Science and Engineering A | | | |
1996 | The determination of material parameters from superplastic inflation tests | Cheng, Jung-Ho; JUNG-HO CHENG | Journal of Materials Processing Technology | | | |
1994 | Ti-6Al-4V 超塑性行為模式的參數之測定程序 | 鄭榮和 ; 陳文杰; Cheng, Jung-Ho | 超塑性成形與擴散接合學術研討會論文集 | | | |
2010 | Traction control for an All-Wheel-Drive electric vehicle with estimation of speed and friction force | Hsu, Y.-W.; Cheng, J.-H.; JUNG-HO CHENG | Sustainable Mobility Revolution: 25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium and Exhibition | | | |
2005 | Ultrasonic atomiation using silicon-based high-frequency multiple-fourier horn nozzles | Tsai, S.C.; Song, Y.L.; Wang, N.; Tsai, C.S.; Chou, Y.F.; Cheng, J.H.; Song, Y.L.; Tsai, C.S.; JUNG-HO CHENG | IEEE Ultrasonics Symposium | | | |
1997 | 三維金屬成形有限元素模擬網格自動重建軟體開發 | 鄭榮和 | | | | |
2006 | 再生能源系統結合氫能源之基礎公共建設研究及應用 | 鄭榮和 ; 胡斯遠; 李盈昌 | | | | |
2007 | 國科會專題研究計劃成果報告 | 鄭榮和 ; 陳丁銓; 林逸祥 | | | | |
2004 | 壓水式反應器組件裂縫成長後之安全評估 | 鄭榮和 ; 胡斯遠; 包漢聰 | | | | |
1993 | 密閉模具中熱鍛造的有限元素分析 | 鄭榮和 | | | | |
1994 | 尾翼穩定拋物體之應力分析與設計(II) | 鄭榮和 | | | | |