公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 |
2017 | Optimization of heat-treatment parameters in hardening of titanium alloy Ti-6Al-4V by using the Taguchi method | Lee, K.-H.; Yang, S.-Y.; Yang, J.-G.; SEN-YEU YANG | International Journal of Advanced Manufacturing Technology | | | |
2008 | Polymer-ridge waveguide fabrication by gas-assisted UV embossing with a soft mold | Cheng, F.-S.; Huang, P.-Y.; Yang, S.-Y.; SEN-YEU YANG | International Polymer Processing | | | |
2010 | Production of bioenergy via the combined processes using radio-frequency plasma and catalysts | Tu, W.-K.; Chang, C.-Y.; Lin, C.-F.; Shie, J.-L.; Chang, C.-F.; Kuo, J.T.; Yang, S.-Y.; Hsi, C.-L.; Shaw, D.-G.; Lee, D.-J.; SEN-YEU YANG | Air and Waste Management Association's Annual Conference and Exhibition | | | |
2018 | Pulse-Width and Temperature Effect on the Switching Behavior of an Etch-Stop-on-MgO-Barrier Spin-Orbit Torque MRAM Cell | Rahaman, S.Z.; Wang, I.-J.; Chen, T.-Y.; CHI-FENG PAI ; Wang, D.-Y.; Wei, J.-H.; Lee, H.-H.; Hsin, Y.-C.; Chang, Y.-J.; Yang, S.-Y.; Kuo, Y.-C.; Su, Y.-H.; Chen, Y.-S.; Huang, K.-C.; CHIH-I WU | IEEE Electron Device Letters | 29 | 23 | |
2007 | Rapid fabrication of ultraviolet-cured polymer microlens arrays by soft roller stamping process | Chang, C.-Y.; Yang, S.-Y.; Chu, M.-H.; SEN-YEU YANG | Microelectronic Engineering | | | |
2013 | Real-time diagnosis of gas-assisted hot embossing process by ultrasound | Cheng, C.-C.; Wu, C.-L.; Wu, K.-T.; Yang, S.-Y.; SEN-YEU YANG | Polymer Engineering and Science | | | |
2008 | Replication of microlens arrays by gas-assisted hot embossing | Hocheng, H.; Wen, T.-T.; Yang, S.-Y.; SEN-YEU YANG | Materials and Manufacturing Processes | | | |
2006 | Singular uniformity after reflow of varied-shaped flip chip solder bump on single substrate | Hsu, H.-J.; Huang, J.-T.; Chao, P.-S.; Wu, C.-S.; Shih, S.-H.; Yang, S.-Y.; SEN-YEU YANG | 2006 International Conference on Electronic Materials and Packaging | | | |
2020 | Size-Dependent Switching Properties of Spin-Orbit Torque MRAM with Manufacturing-Friendly 8-Inch Wafer-Level Uniformity | Rahaman, S.Z.; Su, Y.-H.; Chen, G.-L.; Chen, F.-M.; Wei, J.-H.; Hou, T.-H.; Sheu, S.-S.; CHIH-I WU ; Deng, D.-L.; Wang, I.-J.; Wang, D.-Y.; CHI-FENG PAI ; Hsin, Y.-C.; Yang, S.-Y.; Lee, H.-H.; Chang, Y.-J. | IEEE Journal of the Electron Devices Society | 11 | 13 | |
2020 | Solution strengthening the Ti-6Al-4V joints were brazed by Ti-15Cu-15Ni and Ag-26.7Cu-4.5Ti filler foils | Lee, K.-H.; Yang, S.-Y.; SEN-YEU YANG | Materials Science Forum | | | |
2012 | Spin-spin relaxation of protons in ferrofluids characterized with a high-T c superconducting quantum interference device-detected magnetometer in microtesla fields | Liao, S.-H.; Liu, C.-W.; Yang, H.-C.; Chen, H.-H.; Chen, M.-J.; Chen, K.-L.; Horng, H.-E.; Wang, L.-M.; Yang, S.-Y.; LI-MIN WANG | Applied Physics Letters | 6 | 5 | |
2008 | A Study of an innovative technology for manufacturing optical waveguides based on vacuum-assisted micromolding | Weng, Y.-J.; Weng, Y.-C.; Yang, S.-Y.; Huang, J.-C.; Fang, H.-S.; Wong, Y.-C.; SEN-YEU YANG | Polymer - Plastics Technology and Engineering | | | |
2016 | Study of binding interaction between Pif80 protein fragment and aragonite | Du, Y.-P.; Chang, H.-H.; Yang, S.-Y.; Huang, S.-J.; Tsai, Y.-J.; Huang, J.J.-T.; Chan, J.C.C. | Scientific Reports | 22 | 20 | |
2008 | Study on the formation defect of nano imprinted optical waveguide devices and nano-indentation detection | Weng, Y.-J.; Weng, Y.-C.; Yang, S.-Y.; Wong, J.-L | Polymers for Advanced Technologies | 9 | 7 | |
2007 | A study on the innovative microlens projection lithography applied to the production of microstructures | Weng, Y.-J.; Yang, S.-Y.; MING-SHIANG WU ; Weng, Y.-C.; SEN-YEU YANG ; LON A. WANG | Polymers for Advanced Technologies | 10 | 9 | |
2014 | Substrate effect on characteristics of PbZr<inf>x</inf>Ti <inf>1-x</inf>O<inf>3</inf> (PZT) film | Cheng, C.-C.; Young, S.-L.; Chen, H.-Z.; Yang, S.-Y.; SEN-YEU YANG | Integrated Ferroelectrics | | | |
2009 | Thin-film patterns directly fabricated using a transfer stamping technique | Chan, B.-D.; Hsieh, K.-H.; Yang, S.-Y.; SEN-YEU YANG | Journal of Micromechanics and Microengineering | | | |
2004 | Tunable diffraction of magnetic fluid films and its potential application in coarse wavelength-division multiplexing | Huang, Y.-W.; Hu, S.-T.; Yang, S.-Y.; Horng, H.-E.; Hung, J.-C.; Hong, C.-Y.; Yang, H.-C.; Chao, C.-H.; CHING-FUH LIN | Optics Letters | | | |
2018 | Wearable sensors developed using a novel plastic metal material | Shih, J.-F.; Yang, S.-Y.; Chang, C.-C.; Yang, C.-R.; SEN-YEU YANG | Applied Physics A: Materials Science and Processing | | | |