第 1 到 210 筆結果,共 210 筆。
公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 | |
---|---|---|---|---|---|---|---|
1 | 2024 | Effect of sodium gluconate addition on anomalous codeposition of electroplated nickel-iron alloys | Ma, Ju Lung; Chen, Hou Jen; Chung, Kai Cheng; Wu, Yung Fu; Yen, Chia Ying; Li, Wen Jin; HSIN-CHIH LIN | Thin Solid Films | |||
2 | 2024 | Impact of asymmetric electrodes on ferroelectricity of sub-10 nm HZO thin films | Chen, Hsing Yang; Jiang, Yu Sen; Chuang, Chun Ho; Mo, Chi Lin; Wang, Ting Yun; HSIN-CHIH LIN ; MIIN-JANG CHEN | Nanotechnology | 0 | 0 | |
3 | 2024 | Improving the corrosion and wear resistance of CoCrNiSi0.3 Medium-Entropy Alloy by magnetron sputtered (CrN/Cr)x multilayer films | Lin, Kaifan; Chang, Yi Chun; Chang, Shih Hsien; Ma, Ju Lung; HSIN-CHIH LIN | Surface and Coatings Technology | |||
4 | 2024 | Mechanical performance of a novel low-cost Fe–25Mn–5Co-12.5Cr–5Ni-2.5Si (in at. %) medium-entropy alloy | Lin, Kaifan; Chen, Shih Che; HUNG-WEI YEN ; HSIN-CHIH LIN | Materials Science and Engineering: A | |||
5 | 2023 | Effects of Electrolyte Compositions and Electrical Parameters on Micro-Arc Oxidation Coatings on 7075 Aluminum Alloy | Abbas, Aqeel; Wang, Ting Yi; HSIN-CHIH LIN | Journal of Composites Science | 0 | ||
6 | 2023 | Effects of Electrical Parameters on Micro-Arc Oxidation Coatings on Pure Titanium | Abbas, Aqeel; Kung, Hsuan Ping; HSIN-CHIH LIN | Micromachines | 0 | 0 | |
7 | 2023 | Study of Atomic Layer Deposition Nano-Oxide Films on Corrosion Protection of Al-SiC Composites | Chen, Hou Jen; Chen, Ying Chu; Lin, Pi Chen; Lin, Kaifan; Lin, Jonathan C.; MIIN-JANG CHEN ; HSIN-CHIH LIN | Materials | 1 | 0 | |
8 | 2023 | High-quality AlN epilayers prepared by atomic layer deposition and large-area rapid electron beam annealing | Kao, Wei Chung; Jhong, Fong Jyun; Yin, Yu Tung; HSIN-CHIH LIN ; MIIN-JANG CHEN | Materials Chemistry and Physics | 1 | 1 | |
9 | 2022 | Effects of CNTs, graphene, and organic additives on hydrogen storage performance of severely deformed ZK60 alloy | Abbas, Aqeel; Lin, Zih Bin; Ma, Ru Long; Lin, Kun Ming; HSIN-CHIH LIN | International Journal of Hydrogen Energy | 1 | 0 | |
10 | 2022 | Dielectric Constant Enhancement and Leakage Current Suppression of Metal-Insulator-Metal Capacitors by Atomic Layer Annealing and the Capping Layer Effect Prepared with a Low Thermal Budget | Wang, Chun Yuan; Huang, Hung Chih; Chou, Chun Yi; Chen, Hsing Yang; Ling, Chen Hsiang; HSIN-CHIH LIN ; MIIN-JANG CHEN | ACS Applied Electronic Materials | 0 | 0 | |
11 | 2022 | Enhancement in mechanical properties through an FCC-to-HCP phase transformation in an Fe-17.5Mn-10Co-12.5Cr-5Ni-5Si (in at%) medium-entropy alloy | Lin K; Chen S.-C; Lin H.-C; HSIN-CHIH LIN ; HUNG-WEI YEN | Journal of Alloys and Compounds | 8 | 6 | |
12 | 2022 | Improvement of Corrosion Resistance and Biocompatibility of Biodegradable Mg–Ca Alloy by ALD HfZrO2 Film | Lin P.-C; Lin K; Lin Y.-H; Yang K.-C; Semenov V.I; Lin H.-C; HSIN-CHIH LIN ; MIIN-JANG CHEN | Coatings | 1 | 1 | |
13 | 2021 | Atomic layer deposited TiO<inf>2</inf> films on an equiatomic NiTi shape memory alloy for biomedical applications | Abbas, Aqeel; Hung, Hui Yun; Lin, Pi Chen; Yang, Kai Chang; Chen, Minn Chang; Lin, Hsin-Chih; HSIN-CHIH LIN | Journal of Alloys and Compounds | 22 | 20 | |
14 | 2021 | Enhancement of the anticoagulant capacity of polyvinyl chloride tubing for cardiopulmonary bypass circuit using aluminum oxide nanoscale coating applied through atomic layer deposition | Wang, Chen-Chie; Wang, Li-Chun; Yang, Kai-Chiang; MIIN-JANG CHEN ; HSIN-CHIH LIN ; YIN-YI HAN | Journal of biomedical materials research. Part B, Applied biomaterials | 5 | 5 | |
15 | 2021 | Modulation of zirconia ferroelectricity via crystal orientation of PT electrode | Zhuang Y.-X; Shieh J; Chen M.-J; HSIN-CHIH LIN ; MIIN-JANG CHEN ; TZONG-LIN JAY SHIEH | Proceedings of ASME 2021 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2021 | 0 | 0 | |
16 | 2021 | Atomic layer deposited TiN capping layer for sub-10 nm ferroelectric Hf0.5Zr0.5O2 with large remnant polarization and low thermal budget | Wang C.-I; Wang C.-Y; Chang T.-J; Jiang Y.-S; Shyue J.-J; HSIN-CHIH LIN ; MIIN-JANG CHEN | Applied Surface Science | 5 | 4 | |
17 | 2021 | Effect of atomic layer plasma treatment on TALD-ZrO2 film to improve the corrosion protection of Mg-Ca alloy | Lin P.C; Lin K.F; Chiu C; Semenov V.I; Lin H.C; HSIN-CHIH LIN ; MIIN-JANG CHEN | Surface and Coatings Technology | 5 | 5 | |
18 | 2021 | Ultra-high energy storage density and scale-up of antiferroelectric TiO2/ZrO2/TiO2stacks for supercapacitors | Yi S.-H; HSIN-CHIH LIN ; MIIN-JANG CHEN | Journal of Materials Chemistry A | 18 | 19 | |
19 | 2021 | Impact of a TiN Capping Layer on Phase Transformation and Capacitance Enhancement in ZrO2 | Wang C.-Y; Wang C.-I; Yi S.-H; Chang T.-J; Chou C.-Y; Yin Y.-T; Lin H.-C; HSIN-CHIH LIN ; MIIN-JANG CHEN | ACS Applied Electronic Materials | 4 | 5 | |
20 | 2021 | Role of Vanadium Carbide in Hydrogen Embrittlement of Press-Hardened Steels: Strategy From 1500 to 2000?MPa | Lin Y.-T; Yi H.L; Chang Z.Y; Lin H.-C; HSIN-CHIH LIN ; HUNG-WEI YEN | Frontiers in Materials | 12 | 12 | |
21 | 2021 | Influence of severe plastic deformation and some additives on hydrogenation of ZK60 alloy | Abbas A; Hu K.-C; Lin H.-C; Lin K.-M.; HSIN-CHIH LIN | Journal of Physics and Chemistry of Solids | |||
22 | 2021 | A study on corrosion behavior of micro-arc oxidation coatings doped with 2-aminobenzimidazole loaded halloysite nanotubes on AZ31 magnesium alloys | Wu W.X; Wang W.P; Lin H.C.; HSIN-CHIH LIN | Surface and Coatings Technology | |||
23 | 2021 | Microstructure and mechanical properties of the UFG magnesium alloy Mg-1%Ca | Kulyasova O; Islamgaliev R; Lin H.C; Y?lmazer H.; HSIN-CHIH LIN | Materials Science Forum | |||
24 | 2021 | Effects of ball milling and additives (activated carbon and copper) on hydrogen absorption characteristics of ZK60 alloy | Abbas A; Hu K.-C; Lin H.-C; Lin K.-M.; HSIN-CHIH LIN | Materials Chemistry and Physics | |||
25 | 2020 | Enhancement of Dielectric Properties of Nanoscale HfO 2 Thin Films Via Atomic Layer Bombardment | Yin, Y.-T.; Jiang, Y.-S.; Lin, Y.-T.; Chang, T.-J.; Lin, H.-C.; Chen, M.-J.; HSIN-CHIH LIN ; MIIN-JANG CHEN | ACS Applied Electronic Materials | |||
26 | 2020 | Dielectric properties and reliability enhancement of atomic layer deposited thin films by: In situ atomic layer substrate biasing | Chou, C.-Y.; Chang, T.-J.; Wang, C.-I.; Wang, C.-Y.; Yin, Y.-T.; Chung, T.-F.; Yang, J.-R.; Lin, H.-C.; Chen, M.-J.; JER-REN YANG ; HSIN-CHIH LIN ; MIIN-JANG CHEN | Journal of Materials Chemistry C | |||
27 | 2020 | Hydrogen-induced embrittlement of nickel-chromium-molybdenum containing HSLA steels | Hsu, Y.-T.; Jiang, H.-Y.; Yen, H.-W.; Lin, H.-C.; Hong, S.; HUNG-WEI YEN ; HSIN-CHIH LIN | Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A | |||
28 | 2020 | Leakage current lowering and film densification of ZrO 2 high-k gate dielectrics by layer-by-layer, in-situ atomic layer hydrogen bombardment | Huang, K.-W.; Chang, T.-J.; Wang, C.-Y.; Yi, S.-H.; Wang, C.-I.; Jiang, Y.-S.; Yin, Y.-T.; Lin, H.-C.; Chen, M.-J.; HSIN-CHIH LIN ; MIIN-JANG CHEN | Materials Science in Semiconductor Processing | |||
29 | 2020 | Martensitic transformation and mechanical behavior of a medium-entropy alloy | Wang, C.; Lin, K.F.; Zhao, Y.L.; Yang, T.; Zhang, T.L.; Liu, W.H.; Hsueh, C.H.; Lin, H.C.; Kai, J.J.; Liu, C.T.; CHUN-HWAY HSUEH ; HSIN-CHIH LIN | Materials Science and Engineering A | |||
30 | 2020 | Low-temperature crystallization and paraelectric-ferroelectric phase transformation in nanoscale ZrO 2 thin films induced by atomic layer plasma treatment | Yi, S.-H.; Huang, K.-W.; Lin, H.-C.; Chen, M.-J.; HSIN-CHIH LIN ; MIIN-JANG CHEN | Journal of Materials Chemistry C | 10 | ||
31 | 2020 | Sub-nanometer heating depth of atomic layer annealing | Lee, W.-H.; Kao, W.-C.; Yin, Y.-T.; Yi, S.-H.; Huang, K.-W.; Lin, H.-C.; Chen, M.-J.; HSIN-CHIH LIN ; MIIN-JANG CHEN | Applied Surface Science | |||
32 | 2020 | Optoelectronic properties of p-type NiO films deposited by direct current magnetron sputtering versus high power impulse magnetron sputtering | Chen, S.-C.; Kuo, T.-Y.; Lin, H.-C.; Chen, R.-Z.; Sun, H.; HSIN-CHIH LIN | Applied Surface Science | |||
33 | 2019 | Nanoscale GaN Epilayer Grown by Atomic Layer Annealing and Epitaxy at Low Temperature | Lee W.-H.; Yin Y.-T.; Cheng P.-H.; Shyue J.-J.; Shiojiri M.; Lin H.-C.; HSIN-CHIH LIN ; MIIN-JANG CHEN | ACS Sustainable Chemistry and Engineering | 26 | 24 | |
34 | 2019 | Response of Hydrogen Desorption and Hydrogen Embrittlement to Precipitation of Nanometer-Sized Copper in Tempered Martensitic Low-Carbon Steel | Lin Y.-C.; Chen D.; Chiang M.-H.; Cheng G.-J.; HSIN-CHIH LIN ; HUNG-WEI YEN | JOM | 18 | 16 | |
35 | 2019 | AlN epitaxy on SiC by low-temperature atomic layer deposition: Via layer-by-layer, in situ atomic layer annealing | Kao W.-C.; Lee W.-H.; Yi S.-H.; Shen T.-H.; HSIN-CHIH LIN ; MIIN-JANG CHEN | RSC Advances | 12 | 10 | |
36 | 2019 | Suppression of GeO x interfacial layer and enhancement of the electrical performance of the high-K gate stack by the atomic-layer-deposited AlN buffer layer on Ge metal-oxide-semiconductor devices | Wang C.-I.; Chang T.-J.; Wang C.-Y.; Yin Y.-T.; Shyue J.-J.; HSIN-CHIH LIN ; MIIN-JANG CHEN | RSC Advances | 5 | 5 | |
37 | 2019 | Atomic layer deposited Al2O3 films on NiTi shape memory alloys for biomedical applications | Lin, H.-C.; Chang, Y.-L.; YIN-YI HAN ; Yang, K.-C.; HSIN-CHIH LIN | Procedia Manufacturing | 13 | 0 | |
38 | 2019 | High- K Gate Dielectrics Treated with in Situ Atomic Layer Bombardment | Chang T.-J; Lee W.-H; Wang C.-I; Yi S.-H; Yin Y.-T; Lin H.-C; HSIN-CHIH LIN ; MIIN-JANG CHEN | ACS Applied Electronic Materials | 19 | 19 | |
39 | 2019 | Contribution of enhanced ionization to the optoelectronic properties of p-type NiO films deposited by high power impulse magnetron sputtering | Sun H.; Kuo T.-Y.; Chen S.-C.; Chen Y.-H.; Lin H.-C.; Arab Pour Yazdi M.; Billard A.; HSIN-CHIH LIN | Journal of the European Ceramic Society | |||
40 | 2018 | Microstructure and impact toughness of offshore steel | Cheng T.-C.; Yu C.; Yang T.-C.; Huang C.-Y.; Lin H.-C.; HSIN-CHIH LIN ; REN-KAE SHIUE | Archives of Metallurgy and Materials | 10 | 10 | |
41 | 2018 | Atomic layer deposition of sub-10?nm high-K gate dielectrics on top-gated MoS 2 transistors without surface functionalization | Lin Y.-S.; Cheng P.-H.; Huang K.-W.; HSIN-CHIH LIN ; MIIN-JANG CHEN | Applied Surface Science | 17 | 16 | |
42 | 2018 | 中國民國106年台灣?冶工業之進展(中) | 潘立智; 李輝隆; 林秋豐; 彭裕民; 徐國錦; 郭瑞昭; 陳貞光; 張裕煦; 林新智; 黃瑞德; 許正勳; 賴錦文; 林新智 | ?冶:中國?冶工程學會會刊 | |||
43 | 2018 | 中華民國106年台灣?冶工業之進展(下) | 徐國錦; 郭瑞昭; 陳貞光; 張裕煦; 林新智; 黃瑞德; 許正勳; 賴錦文; 林新智 | ?冶:中國?冶工程學會會刊 | |||
44 | 2017 | High-temperature tempered martensite embrittlement in quenched-and-tempered offshore steels | Yen H.-W.; Chiang M.-H.; Lin Y.-C.; Chen D.; Huang C.-Y.; HSIN-CHIH LIN ; HUNG-WEI YEN | Metals | 23 | 20 | |
45 | 2017 | Low-temperature atomic layer epitaxy of AlN ultrathin films by layer-by-layer, in-situ atomic layer annealing | Shih H.-Y.; Lee W.-H.; Kao W.-C.; Chuang Y.-C.; Lin R.-M.; Lin H.-C.; Shiojiri M.; HSIN-CHIH LIN ; MIIN-JANG CHEN | Scientific Reports | 76 | 75 | |
46 | 2017 | Tuning of the work function of bilayer metal gate by in-situ atomic layer lamellar doping of AlN in TiN interlayer | Huang K.-W.; Cheng P.-H.; Lin Y.-S.; Wang C.-I.; Lin H.-C.; HSIN-CHIH LIN ; MIIN-JANG CHEN | Journal of Applied Physics | 5 | 5 | |
47 | 2017 | Effective work function modulation of the bilayer metal gate stacks by the Hf-doped thin TiN interlayer prepared by the in-situ atomic layer doping technique | Lin Y.-S.; Huang K.-W.; Lin H.-C.; HSIN-CHIH LIN ; MIIN-JANG CHEN | Solid State Communications | 6 | 5 | |
48 | 2017 | Hydrogen assisted tempered martensite embrittlement of ultra high strength martensitic steel | Chen T.C.; Chien W.H.; Wang Y.T.; Huang C.Y.; Yen H.W.; HSIN-CHIH LIN ; HUNG-WEI YEN | Materials Science Forum | 1 | 0 | |
49 | 2016 | Divergent dielectric characteristics in cascaded high-K gate stacks with reverse gradient bandgap structures | Tsai M.-C.; Cheng P.-H.; Lee M.-H.; Lin H.-C.; HSIN-CHIH LIN ; MIIN-JANG CHEN | Journal of Physics D: Applied Physics | 3 | 3 | |
50 | 2016 | In situ atomic layer nitridation on the top and down regions of the amorphous and crystalline high-K gate dielectrics | Tsai M.-C.; Lee M.-H.; Kuo C.-L. ; HSIN-CHIH LIN ; MIIN-JANG CHEN | Applied Surface Science | 5 | 5 | |
51 | 2016 | Suppression of interfacial layer in high-K gate stack with crystalline high-K dielectric and AlN buffer layer structure | Wang W.-C.; Tsai M.-C.; Lin Y.-P.; Tsai Y.-J.; Lin H.-C.; HSIN-CHIH LIN ; MIIN-JANG CHEN | Materials Chemistry and Physics | 5 | 5 | |
52 | 2016 | Hydrophilic/hydrophobic surface of Al2O3 thin films grown by thermal and plasma-enhanced atomic layer deposition on plasticized polyvinyl chloride (PVC) | Wang, L.-C.; YIN-YI HAN ; Yang, K.-C.; Chen, M.-J.; Lin, H.-C.; Lin, C.-K.; HSIN-CHIH LIN ; MIIN-JANG CHEN | Surface and Coatings Technology | 35 | 32 | |
53 | 2016 | Microstructure and texture evolution of AA 6063 during an Ex-ECAE process | Liu C.-H.; Lin H.-C.; Hsu Y.-T.; HSIN-CHIH LIN | Metals and Materials International | |||
54 | 2016 | Modifications in structure and properties of p-type nickel oxide films after argon ion beam bombardment | Chen S.C.; Kuo T.Y.; Wen C.K.; Wang C.H.; Hsu S.W.; Lin H.C.; HSIN-CHIH LIN | Science of Advanced Materials | |||
55 | 2016 | Design of a novel dummy block by finite element simulation to eliminate back end defects in direct extrusion | Liu C.-H.; Yang J.-B.; Lin H.-C.; HSIN-CHIH LIN | Transactions of the Indian Institute of Metals | |||
56 | 2015 | Investigation of defects in ultra-thin Al 2 O 3 films deposited on pure copper by the atomic layer deposition technique | Chang M.L.; Wang L.C.; Lin H.C. ; Chen M.J. ; Lin K.M. | Applied Surface Science | 22 | 21 | |
57 | 2015 | Low-temperature toughness of direct quenched offshore steel | Cheng T.C.; Yu C.; Yang T.C.; Huang C.Y.; Lin H.C.; HSIN-CHIH LIN ; REN-KAE SHIUE | Materials Research Innovations | 0 | 0 | |
58 | 2015 | Equal Channel Angular Extrusion of AA 6063 Using Conventional Direct Extrusion Press | Liu C.-H.; Lin H.-C.; HSIN-CHIH LIN | Journal of Materials Engineering and Performance | |||
59 | 2015 | Microalloying effect of Si on mechanical properties of Ti based bulk metallic glass | Tsai P.H.; Hsu K.T.; Ke J.H.; Lin H.C.; Jang J.S.C.; Huang J.C.; HSIN-CHIH LIN | Materials Technology | |||
60 | 2014 | Characterization and properties of NiO films produced by rf magnetron sputtering with oxygen ion source assistance | Chen S.C.; Wen C.K.; Kuo T.Y.; Peng W.C.; HSIN-CHIH LIN | Thin Solid Films | 58 | 59 | |
61 | 2014 | Optimization of shape-memory effect in Fe-Mn-Si-Cr-Re shape-memory alloys | Lin K.-M.; Chen J.-H.; Lin C.-C.; Liu C.-H.; HSIN-CHIH LIN | Journal of Materials Engineering and Performance | 7 | 7 | |
62 | 2014 | Structural, optical, and electrical properties of NiO-In composite films deposited by radio frequency cosputtering | Chen S.-C.; Kuo T.-Y.; Lin H.-C.; Wen C.-K.; Lin Y.-C.; Chen C.-D.; HSIN-CHIH LIN | Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films | |||
63 | 2014 | Electrical and optical properties of p-type conductive NiO-Pt thin films | Chen S.C.; Kuo T.Y.; Lin H.C.; Hsu S.W.; Lin Y.C.; HSIN-CHIH LIN | International Journal of Nanotechnology | |||
64 | 2014 | Effects of cold-spray coatings on the corrosion properties of AZ80 magnesium alloy | Lee Y.J.; Wu S.C.; Chen J.H.; Yeh M.T.; Lin K.M.; Lin H.C.; HSIN-CHIH LIN | Key Engineering Materials | |||
65 | 2014 | Fatigue properties improvement of high-strength aluminum alloy by using a ZrCu-based metallic glass thin film coating | Tsai P.H.; Li J.B.; Chang Y.Z.; Lin H.C.; Jang J.S.C.; Chu J.P.; Lee J.W.; Liaw P.K.; HSIN-CHIH LIN | Thin Solid Films | |||
66 | 2014 | Graphene/activated carbon supercapacitors with sulfonated-polyetheretherketone as solid-state electrolyte and multifunctional binder | Chen Y.-R.; Chiu K.-F.; Lin H.C.; Chen C.-L.; Hsieh C.Y.; Tsai C.B.; Chu B.T.T.; HSIN-CHIH LIN | Solid State Sciences | |||
67 | 2014 | Designing a toxic-element-free Ti-based amorphous alloy with remarkable supercooled liquid region for biomedical application | Lin H.C.; Tsai P.H.; Ke J.H.; Li J.B.; Jang J.S.C.; Huang C.H.; Haung J.C.; HSIN-CHIH LIN | Intermetallics | |||
68 | 2014 | The effect of dispersion status with functionalized graphenes for electric double-layer capacitors | Chen Y.-R.; Chiu K.-F.; Lin H.C.; Hsieh C.-Y.; Tsai C.B.; Chu B.T.T.; HSIN-CHIH LIN | Materials Science and Engineering B: Solid-State Materials for Advanced Technology | |||
69 | 2013 | High rate performance of LiMn2O4 cathodes for lithium ion batteries synthesized by low temperature oxygen plasma assisted sol-gel process | Chen C.-L.; Chiu K.-F.; Chen Y.-R.; Chen C.C.; Lin H.C.; HSIN-CHIH LIN | Thin Solid Films | 16 | 15 | |
70 | 2013 | Pseudoelasticity of thermo-mechanically treated Fe-Mn-Si-Cr-Ta alloys | Lin H.-C.; Wu S.-K.; Peng Y.-T.; Cheng T.-C.; SHYI-KAAN WU ; HSIN-CHIH LIN | Journal of Alloys and Compounds | 10 | 10 | |
71 | 2013 | Improvement in electrical characteristics of HfO <inf>2</inf> gate dielectrics treated by remote NH <inf>3</inf> plasma | Huang, L.-T.; Chang, M.-L.; Huang, J.-J.; Lin, H.-C. ; Kuo, C.-L. ; Lee, M.-H.; CHEE-WEE LIU ; MIIN-JANG CHEN | Applied Surface Science | 11 | 11 | |
72 | 2013 | Effect of hydrogen participation on the improvement in electrical characteristics of HfO2 gate dielectrics by post-deposition remote N2, N2/H2, and NH3 plasma treatments | Huang L.-T.; Chang M.-L.; Huang J.-J.; Kuo C.-L.; Lin H.-C.; Liao M.-H.; Lee M.-H.; HSIN-CHIH LIN ; MING-HAN LIAO ; CHIN-LUNG KUO ; MIIN-JANG CHEN | Journal of Physics D: Applied Physics | 10 | 7 | |
73 | 2013 | Effects of pre-sputtered Al interlayer on the atomic layer deposition of Al 2 O 3 films on Mg-10Li-0.5Zn alloy | Wang P.C.; Cheng T.C.; Lin H.C.; Chen M.J. ; HSIN-CHIH LIN ; Yeh M.T. | Applied Surface Science | 20 | 17 | |
74 | 2013 | Effect of palladium content on microstructures, electrical and optical properties of NiO films by rf sputtering | Chen S.C.; Kuo T.Y.; Lin Y.C.; Hsu S.W.; HSIN-CHIH LIN | Thin Solid Films | 7 | 7 | |
75 | 2013 | Novel open-cell bulk metallic glass foams with promising characteristics | Li J.B.; Lin H.C.; Jang J.S.C.; Kuo C.N.; Huang J.C.; HSIN-CHIH LIN | Materials Letters | |||
76 | 2013 | Thin catalyst layer deposited on proton-exchange membrane by self-breathing method | Chen Y.-R.; Chiu K.-F.; Chen C.-L.; Lin H.C.; Chang W.Y.; Tsai C.B.; Ho W.H.; HSIN-CHIH LIN | Surface and Coatings Technology | |||
77 | 2013 | Effect of indium content on optical and electrical properties of in-doped ZnO films by RF co-sputtering | Chen S.C.; Kuo T.Y.; Peng W.C.; Ou S.L.; Lin H.C.; HSIN-CHIH LIN | Nanoscience and Nanotechnology Letters | |||
78 | 2013 | Zr-based metallic glass thin film coating for fatigue-properties improvement of 7075-T6 aluminum alloy | Chang Y.Z.; Tsai P.H.; Li J.B.; Lin H.C.; Jang J.S.C.; Li C.; Chen G.J.; Chen Y.C.; Chu J.P.; Liaw P.K.; HSIN-CHIH LIN | Thin Solid Films | |||
79 | 2012 | Surface coatings of super light magnesium�Vlithium alloys | Lin, H C; Wang, P C; Wu, T F; Lin, M C; Yeh, M T; HSIN-CHIH LIN | Materials Science and Technology | 3 | 2 | |
80 | 2012 | Electrical and optical properties of nio composite films by radio frequency magnetron sputtering | Chen S.C.; Kuo T.Y.; Lin Y.C.; HSIN-CHIH LIN | Journal of Nanoscience and Nanotechnology | 5 | 4 | |
81 | 2012 | Improvement of oxidation resistance of copper by atomic layer deposition | Chang M.L.; Cheng T.C.; Lin M.C.; HSIN-CHIH LIN ; MIIN-JANG CHEN | Applied Surface Science | 30 | 29 | |
82 | 2012 | Preparation and characterization of LiMn 2O 4 cathodes surface-modified by DC pulsed plasma treatment | Chen C.-L.; Chiu K.-F.; Chen Y.-R.; Lin H.-C.; Chen C.C.; HSIN-CHIH LIN | Journal of the Chinese Chemical Society | |||
83 | 2011 | Influences of process parameters on texture and microstructure of NiO films | Kuo, T.Y.; Chen, S.C.; Peng, W.C.; Lin, Y.C.; HSIN-CHIH LIN | Thin Solid Films | 21 | 21 | |
84 | 2011 | Dye-sensitized Solar Cells Using ZnO-nanorod Electrodes | Huang, L.T.; Huang, S.R.; Chang, M.L.; Wang, R.R.; Lin, H.C.; HSIN-CHIH LIN ; MIIN-JANG CHEN | Journal of the Chinese Chemical Society | 3 | 0 | |
85 | 2011 | The stamping behavior of an early-aged 6061 aluminum alloy | Lung, Y.F.; Lin, M.C.; Lin, H.C.; HSIN-CHIH LIN | Materials & Design (1980-2015) | 5 | 3 | |
86 | 2011 | Effects of T5 treatment on the microstructure and mechanical properties of Mg-8Al-2Li alloy | Wang P.C.; Lin H.C.; Lin K.M.; Lin M.C.; Yeh M.T.; HSIN-CHIH LIN | Materials Transactions | 4 | 4 | |
87 | 2011 | Combinational effects of oxygen plasma irradiation and annealing on Li Mn2 O4 thin film cathodes | Chen C.C.; Chiu K.-F.; Lin K.M.; Lin H.C.; Yang C.-R.; HSIN-CHIH LIN ; Lin, Hsin Chih | Journal of the Electrochemical Society | 3 | 3 | |
88 | 2011 | Preparation and properties of p-type transparent conductive Cu-doped NiO films | Chen, S.C.; Kuo, T.Y.; Lin, Y.C.; HSIN-CHIH LIN | Thin Solid Films | 112 | 110 | |
89 | 2010 | Lithium phosphorus oxynitride solid-state thin-film electrolyte deposited and modified by bias sputtering and low temperature annealing | Chiu, K.-F.; Chen, C.C.; Lin, K.M.; Lo, C.C.; Lin, H.C.; Ho, W.-H.; HSIN-CHIH LIN | Journal of Vacuum Science & Technology A Vacuum Surfaces and Films | 12 | 10 | |
90 | 2010 | Improvement of wear and cavitation-erosion by ALD-deposited LiAlxOy films on an Mg-10Li-0.5Zn alloy | Wang, P.C.; Shih, Y.T.; Lin, M.C.; Lin, H.C.; Chen, M.J.; Lin, K.M.; HSIN-CHIH LIN ; MIIN-JANG CHEN | Surface and Coatings Technology | 10 | 8 | |
91 | 2010 | Effects of aging treatment on microstructure and mechanical property of an AZ80N magnesium alloy | Wang, P.C.; Lin, M.C.; Lin, H.C.; Lin, K.M.; Yeh, M.T.; HSIN-CHIH LIN | Materials Science and Engineering A | 15 | 13 | |
92 | 2010 | Improving the hydrogen absorption properties of commercial Mg-Zn-Zr alloy | Wang, Jian-Yih; Wu, Chen-Yang; Nieh, Jo-Kuang; Lin, Hsin-Chih ; Lin, K.M.; Bor, Hui-Yun | International Journal of Hydrogen Energy | 16 | 14 | |
93 | 2010 | Structural Evolution and Electrochemical Performances of Oxygen Plasma-Treated LiMn2O4 Thin-Film Cathodes | Chen, Chen Chung; Chiu, Kuo-Feng; Lin, Kun Ming; Lin, Hsin Chih ; Yang, Chang-Rung; Wang, Fu Ming; HSIN-CHIH LIN | Journal of The Electrochemical Society | 13 | 14 | |
94 | 2010 | Modification of sputter deposited solid-state electrolyte thin films | Chiu, K.-F.; Chen, C.C.; Lin, K.M.; Lin, H.C.; Lo, C.C.; Ho, W.H.; HSIN-CHIH LIN | Vacuum | 21 | 18 | |
95 | 2010 | A study of atomic layer deposited LiAlxOy films on Mg-Li alloys | Wang, P.C.; Shih, Y.T.; Lin, M.C.; Lin, H.C.; Chen, M.J.; HSIN-CHIH LIN ; MIIN-JANG CHEN | Thin Solid Films | 23 | 20 | |
96 | 2010 | PTFE coated Nafion proton conducting membranes for direct methanol fuel cells | Chiu, K.-F.; Chen, Y.-R.; Lin, H.C.; HSIN-CHIH LIN | Surface and Coatings Technology | 7 | 5 | |
97 | 2010 | A study of TiNiCr ternary shape memory alloys | Hsieh, S.F.; Chen, S.L.; Lin, H.C.; Lin, M.H.; Huang, J.H.; HSIN-CHIH LIN | Journal of Alloys and Compounds | |||
98 | 2009 | Thin film encapsulation of DSSCs on plastic substrate | Huang L.-T.; Lin M.-C.; Chang M.-L.; Wang R.-R.; Lin H.-C.; HSIN-CHIH LIN | Thin Solid Films | |||
99 | 2009 | Effects of thermo-mechanical treatment on a Fe-13Mn-5Si-12Cr-5Ni shape memory alloy | Wu W.J.; Lin H.C.; Lin K.N.; Wu S.K.; Lin K.M.; HSIN-CHIH LIN | International Conference on Martensitic Transformations, ICOMAT-08 | |||
100 | 2009 | Modification of low temperature deposited LiMn2O4 thin film cathodes by oxygen plasma irradiation | Chen C.C.; Chiu K.-F.; Lin K.M.; Lin H.C.; HSIN-CHIH LIN | Thin Solid Films | |||
101 | 2009 | The machining characteristics and shape recovery ability of Ti-Ni-X (X=Zr, Cr) ternary shape memory alloys using the wire electro-discharge machining | Hsieh S.F.; Chen S.L.; Lin H.C.; Lin M.H.; Chiou S.Y.; HSIN-CHIH LIN | International Journal of Machine Tools and Manufacture | |||
102 | 2009 | Improvement of shape memory effect in Fe-Mn-Si alloy by slight tantalum addition | Yang C.-H.; Lin H.-C.; Lin K.-M.; HSIN-CHIH LIN | Materials Science and Engineering A | |||
103 | 2009 | A study of aging treatment on the Mg-10Li-0.5Zn alloy | Wang P.C.; Lin H.C.; Lin K.M.; Yeh M.T.; Lin C.Y.; HSIN-CHIH LIN | Materials Transactions | |||
104 | 2008 | 新的形狀記憶合金之研究-新的鐵基形狀記憶合金之研究(2/3) | 林新智 | ||||
105 | 2008 | Aging effect on a Ti<inf>47.25</inf>Ni<inf>48.75</inf>V<inf>4</inf> shape memory alloy | Lin, H.C. ; Yang, C.H.; Lin, M.C.; Lin, C.S. ; Lin, K.M.; L.S. Chang | Journal of Alloys and Compounds | |||
106 | 2008 | The Stress Relaxation of a Fe59Mn30Si6Cr5 Shape Memory Alloy | Lin, H.C.; Wang, T.P.; Lin, K.M.; Chung, C.Y.; Wang, P.C.; Ho, W.H.; LinHC | Journal of Alloys and Compounds | |||
107 | 2008 | Aging effect on a Ti47.25Ni48.75V4 shape memory alloy | Lin, H.C.; Yang, C.H.; Lin, M.C.; Lin, C.S.; Lin, K.M.; Chang, L.S.; LinHC ; LinCS | Journal of Alloys and Compounds | |||
108 | 2008 | Effects of slight Re addition on a Fe-25Mn-6Si-5Cr shape memory alloy | Wang T.P.; Lin K.M.; Lin H.C.; Wu W.J.; HSIN-CHIH LIN | Journal of Computational and Theoretical Nanoscience | 1 | 1 | |
109 | 2008 | Effects of 2 mass % Li addition on the AZ80 Mg alloy | Wang P.C.; Lin C.C.; Huang T.Y.; Lin H.C.; Lee Y.H.; Yeh M.T.; Wang J.Y.; HSIN-CHIH LIN | Materials Transactions | |||
110 | 2008 | The precipitation hardening of LZ101 magnesium-lithium alloy | Wang P.C.; Lin H.C.; Lin K.M.; Yeh M.T.; HSIN-CHIH LIN | 17th IFHTSE Congress | |||
111 | 2008 | Electrochemical performances of Cu nanodots modified amorphous Si thin films for lithium-ion batteries | Chiu K.-F.; Lin K.M.; Lin H.C.; Hsu C.H.; Chen C.C.; Shieh D.T.; HSIN-CHIH LIN | Journal of the Electrochemical Society | |||
112 | 2008 | Effects of thermo-mechanical treatment on a Fe-30Mn-6Si shape memory alloy | Yang C.H.; Lin H.C.; Lin K.M.; Tsai H.K.; HSIN-CHIH LIN | Materials Science and Engineering A | |||
113 | 2008 | Gas barrier properties of titanium oxynitride films deposited on polyethylene terephthalate substrates by reactive magnetron sputtering | Lin M.-C.; Chang L.-S.; Lin H.C.; HSIN-CHIH LIN | Applied Surface Science | |||
114 | 2008 | The stress relaxation of a Fe<inf>59</inf>Mn<inf>30</inf>Si<inf>6</inf>Cr<inf>5</inf> shape memory alloy | Lin, H.C.; Wang, T.P.; Lin, K.M.; Chung, C.Y.; Wang, P.C.; Ho, W.H.; HSIN-CHIH LIN | Journal of Alloys and Compounds | |||
115 | 2008 | Effects of nitrogen partial pressure on titanium oxynitride films deposited by reactive RF magnetron sputtering onto PET substrates | Lin M.C.; Chang L.-S.; Lin H.C.; HSIN-CHIH LIN | Surface and Coatings Technology | |||
116 | 2008 | Effects of carbon content and thermo-mechanical treatment on Fe 59Mn30Si6Cr5Cx (X = 0.015-0.1 mass%) shape memory alloys | Yang C.H.; Lin H.C.; Lin K.M.; Ho W.H.; HSIN-CHIH LIN | Materials Transactions | |||
117 | 2008 | Electrical discharge machining of a NiAlFe ternary shape memory alloy | Chen S.L.; Hsieh S.F.; Lin H.C.; Lin M.H.; Huang J.S.; HSIN-CHIH LIN | Journal of Alloys and Compounds | |||
118 | 2008 | The corrosion behaviors of heat-treated SAE 8620 steels | Hong S.; Lin H.C.; Lee Y.; Lian T.S.; Tseng L.Y.; Lin K.M.; HSIN-CHIH LIN | Materials Science Forum | |||
119 | 2008 | The crystal structure and mechanical property of AZ80-2%Li Mg alloy | Wang P.C.; Lin C.C.; Huang T.Y.; Lin H.C.; Yeh M.T.; Lin K.M.; HSIN-CHIH LIN | Advanced Materials Research | |||
120 | 2007 | Characteristics of Activation and Anti-poisoning in an LmNi4.8Al0.2 Hydrogen Storage Alloy | Lin, H.C.; Lin, K.M.; Sung, C.W.; Wu, K.C.; LinHC | International Journal of Hydrogen Energy | |||
121 | 2007 | Cyclic Hydrogen Absorption-Desorption Characteristics of TiCrV and Ti0.8Cr1.2V Alloys | Lin, H.C.; Lin, K.M.; Wu, K.C.; Hsiung, H.H.; Tsai, H.K.; LinHC | International Journal of Hydrogen Energy | |||
122 | 2007 | Improved electrochemical performances of oxygen plasma treated LiMn 2O4 thin films | Chen C.C.; Chiu K.-F.; Lin K.M.; Lin H.C.; Yang C.-R.; HSIN-CHIH LIN | Physica Scripta T | 14 | 13 | |
123 | 2007 | Structural evolution and electrochemical performance of sputter-deposited Cu6 Sn5 thin-film anodes | Chiu K.-F.; Lin K.M.; Lin H.C.; Chen W.Y.; Shieh D.T.; HSIN-CHIH LIN | Journal of the Electrochemical Society | |||
124 | 2007 | Effects of heat treatment and composition modification on SAE 8620 steels | Hong S.; Lin H.C.; Yang C.H.; Tseng L.Y.; Lin K.M.; HSIN-CHIH LIN | Materials Science Forum | |||
125 | 2007 | Cyclic hydrogen absorption-desorption characteristics of TiCrV and Ti0.8 Cr1.2 V alloys | Lin H.C.; Lin K.M.; Wu K.C.; Hsiung H.H.; Tsai H.K.; HSIN-CHIH LIN | International Journal of Hydrogen Energy | |||
126 | 2007 | Electrical discharge machining of TiNiCr and TiNiZr ternary shape memory alloys | Chen S.L.; Hsieh S.F.; Lin H.C.; Lin M.H.; Huang J.S.; HSIN-CHIH LIN | Materials Science and Engineering A | |||
127 | 2007 | Characteristics of activation and anti-poisoning in an LmNi4.8 Al0.2 hydrogen storage alloy | Lin H.C.; Lin K.M.; Sung C.W.; Wu K.C.; HSIN-CHIH LIN | International Journal of Hydrogen Energy | |||
128 | 2007 | The effect of Ti additions on the hydrogen absorption properties of mechanically alloyed Mg2Ni powders | Lin C.K.; Wang C.K.; Lee P.Y.; Lin H.C.; Lin K.M.; HSIN-CHIH LIN | Materials Science and Engineering A | |||
129 | 2006 | Effect of temperature on the sliding wear behavior of laser surface alloyed Ni-base on Al–Mg–Si alloy | Chuang, Yao-Chih; Lee, Shih-Chin; Lin, Hsin-Chih | Applied Surface Science | |||
130 | 2006 | Microstructure and Characteristic of Laser Surface Alloyed Ni and Ni--Cr--B--Si on Al--Mg--Si Alloy | Chuang, Yao-Chih; Lee, Shih-Chin; Lin, Hsin-Chih | Materials Transactions | |||
131 | 2006 | Effects of thermo-mechanical training on a Fe59Mn30Si6Cr5 shape memory alloy | Lin H.C.; Lin K.M.; Wu S.K.; Wang T.P.; SHYI-KAAN WU ; HSIN-CHIH LIN | Materials Science and Engineering A | 27 | 23 | |
132 | 2006 | Formation and properties of stannate conversion coatings on AZ61 magnesium alloys | Lin, C.S.; Lin, H.C.; Lin, K.M.; Lai, W.C.; LinCS ; LinHC | Corrosion Science | 127 | ||
133 | 2006 | Electrical resistivity of Ti-Ni binary and Ti-Ni-X (X = Fe, Cu) ternary shape memory alloys | Wu S.K.; Lin H.C.; SHYI-KAAN WU ; HSIN-CHIH LIN | Materials Science and Engineering A | 27 | 24 | |
134 | 2006 | A study on the low temperature internal friction relaxation peak in a Ti49.8Ni50.2 alloy | Wu S.-K. ; Lin H.-C.; HSIN-CHIH LIN | Materials Transactions | 8 | 7 | |
135 | 2006 | Wear Characteristics of a Laser Surface Alloyed Al-Mg-Si with Co Alloy Powder | Chuang, Yao-Chih; Lee, Shih-Chin; Lin, Hsin-Chih | Materials Transactions | |||
136 | 2006 | Electrical resistivity of Ti–Ni binary and Ti–Ni–X (X = Fe, Cu) ternary shape memory alloys | Wu, S.K.; Lin, H.C.; Lin, T.Y.; WuSK ; LinHC | Materials Science and Engineering A | |||
137 | 2006 | A study of high-speed slurry erosion of NiCrBSi thermal-sprayed coating | Lin M.C.; Chang L.S.; Lin H.C.; Yang C.H.; Lin K.M.; HSIN-CHIH LIN | Surface and Coatings Technology | |||
138 | 2006 | Effect of temperature on the sliding wear behavior of laser surface alloyed Ni-base on Al-Mg-Si alloy | Chuang Y.-C.; Lee S.-C.; Lin H.-C.; HSIN-CHIH LIN | Applied Surface Science | |||
139 | 2006 | Anode-shielded, sputter-deposited nanocrystalline Sn thin-film anodes for lithium-ion batteries | Chiu K.-F.; Lin H.C.; Lin K.M.; Lin T.Y.; Shieh D.T.; HSIN-CHIH LIN | Journal of the Electrochemical Society | |||
140 | 2006 | The significant role of solid oxide interphase in enhancement of cycling performance of sn thin-film anodes | Chiu K.-F.; Lin H.C.; Lin K.M.; Lin T.Y.; Shieh D.T.; HSIN-CHIH LIN | Journal of the Electrochemical Society | |||
141 | 2006 | Microstructure and characteristic of laser surface alloyed Ni and Ni-Cr-B-Si on Al-Mg-Si alloy | Chuang Y.-C.; Lee S.-C.; Lin H.-C.; HSIN-CHIH LIN | Materials Transactions | |||
142 | 2006 | Stability improvement of LiMn 2O 4 thin-film cathodes under high rate and over-discharge cycling | Chiu K.-F.; Lin H.C.; Lin K.M.; Chen C.C.; HSIN-CHIH LIN | Journal of the Electrochemical Society | |||
143 | 2005 | Transformation sequence and second phases in ternary Ti-Ni-W shape memory alloys with less than 2 at.% W | Hsieh S.F.; Wu S.K. ; Lin H.C. ; C.H. Yang | Journal of Alloys and Compounds | |||
144 | 2005 | 形狀記憶合金性能增進之研究─子計畫三--增進鐵基形狀記憶合金記憶性能之研究(3/3) | 林新智 | ||||
145 | 2005 | Structure and hydrogen absorption property of Mg2Ni-Ti alloy powders prepared by mechanical alloying | Lin C.K.; Wang C.K.; Lin H.C.; Lee P.Y.; HSIN-CHIH LIN | Journal of Metastable and Nanocrystalline Materials | |||
146 | 2005 | The wire electro-discharge machining characteristics of Fe-30Mn-6Si and Fe-30Mn-6Si-5Cr shape memory alloys | Lin H.C.; Lin K.M.; Chen Y.S.; Chu C.L.; HSIN-CHIH LIN | Journal of Materials Processing Technology | |||
147 | 2005 | Effects of Aluminum addition on magnesium-lithium-zinc alloy | Lin H.C.; Lin K.M.; Lin H.M.; Yang C.H.; Yeh M.T.; HSIN-CHIH LIN | Magnesium Technology | |||
148 | 2005 | Ion nitriding of Fe-30Mn-6Si-5Cr shape memory alloy I. Nitriding parameters and microstructure characterization | Lin H.C.; Lin K.M.; Chen Y.S.; HSIN-CHIH LIN | Surface and Coatings Technology | |||
149 | 2005 | A study of Ti50-x/2Ni40-x/2Cu10Cr x (x = 0 ? 1 at.%) shape memory alloys | Lin H.C.; Yang C.H.; Lin K.M.; Hsu G.K.; HSIN-CHIH LIN | Journal of Alloys and Compounds | |||
150 | 2005 | Ion nitriding of Fe-30Mn-6Si-5Cr shape memory alloyII. Erosion characteristics | Lin H.C.; Lin K.M.; Chen Y.S.; Yang C.H.; HSIN-CHIH LIN | Surface and Coatings Technology | |||
151 | 2005 | Modification of sputter-deposited nanocrystalline Li xMn 2-yO 4 thin-film cathodes by in situ substrate bias and postanneal | Chiu K.-F.; Lin H.C.; Lin K.M.; Tsai C.H.; HSIN-CHIH LIN | Journal of the Electrochemical Society | |||
152 | 2004 | Structural Evolution and Stability of RF Sputter Deposited Li xMn2-yO4 Thin Film Cathodes | Chiu K.-F.; Hsiao H.H.; Chen G.S.; Liu H.L.; Her J.L.; Lin H.C.; HSIN-CHIH LIN | Journal of the Electrochemical Society | |||
153 | 2003 | Aging effect on the low temperature internal friction relaxation peak in a Ti49Ni51 alloy | Lin, H. C.; Wu, S. K.; SHYI-KAAN WU ; HSIN-CHIH LIN | Journal of Alloys and Compounds | 30 | 30 | |
154 | 2003 | Damping characteristics of TiNi binary and ternary shape memory alloys | Wu, S. K.; SHYI-KAAN WU ; HSIN-CHIH LIN | Journal of Alloys and Compounds | 85 | 74 | |
155 | 2003 | Effects of annealing and NaOH pretreatment on an LmNi3.65Al 0.34Mn0.27Co0.74 hydrogen storage alloy | Lin H.C.; Lin K.M.; Chou H.T.; Yeh M.T.; HSIN-CHIH LIN | Journal of Alloys and Compounds | |||
156 | 2002 | The corrosion behavior of Fe-based shape memory alloys | Lin H.C.; Lin K.M.; Lin C.S.; HSIN-CHIH LIN ; CHAO-SUNG LIN | Corrosion Science | 56 | 50 | |
157 | 2002 | Martensitic transformation of a Ti-rich Ti51Ni47Si2 shape memory alloy | Hsieh S.F.; SHYI-KAAN WU ; HSIN-CHIH LIN | Journal of Alloys and Compounds | 7 | 7 | |
158 | 2002 | Transformation temperatures and second phases in Ti-Ni-Si ternary shape memory alloys with Si?2 at.% | Hsieh S.F.; Wu S.K.; SHYI-KAAN WU ; HSIN-CHIH LIN | Journal of Alloys and Compounds | 8 | 9 | |
159 | 2002 | The slurry erosion characteristics of precipitation-hardened Ti49Ni51 shape-memory alloy | Wu S.K.; Lin H.C.; Yang C.H.; HSIN-CHIH LIN | Materials Science Forum | |||
160 | 2002 | Corrosion behaviors of Fe-based shape-memory alloys | Lin H.C.; Lin K.M.; Lin C.S.; Chen F.H.; HSIN-CHIH LIN | Materials Science Forum | |||
161 | 2001 | A comparison of slurry erosion characteristics of TiNi shape memory alloys and SUS304 stainless steel | Lin H.C.; Wu S.K.; SHYI-KAAN WU ; HSIN-CHIH LIN | Wear | 54 | 51 | |
162 | 2001 | Phenomenological analysis of martensitic transformation in cold-rolled TiNi-base shape memory alloys | Wu S.K.; Lin H.C.; SHYI-KAAN WU ; HSIN-CHIH LIN | Materials Chemistry and Physics | 9 | 9 | |
163 | 2001 | An investigation of grain-boundary phase in Fe-30Mn-6Si-5Cr shape memory alloy | Lin H.C.; Lin C.S.; Lin K.M.; HSIN-CHIH LIN ; CHAO-SUNG LIN | Journal of Alloys and Compounds | 14 | 14 | |
164 | 2001 | The slurry erosion characteristics of precipitation-hardened Ti49Ni51 shape-memory alloy | Wu, S. K.; Lin, H. C.; Yang, C. H.; HSIN-CHIH LIN | Shape Memory Materials and Its Applications | |||
165 | 2001 | Electro-discharge machining characteristics of TiNi shape memory alloys | Lin H.C.; Lin K.M.; Cheng I.S.; HSIN-CHIH LIN | Journal of Materials Science | |||
166 | 2000 | Recent development of TiNi-based shape memory alloys in Taiwan | Wu S.K.; SHYI-KAAN WU ; HSIN-CHIH LIN | Materials Chemistry and Physics | 82 | 66 | |
167 | 2000 | A comparison of the cavitation erosion resistance of TiNi alloys, SUS304 stainless steel and Ni-based self-fluxing alloy | Wu S.K.; Lin H.C.; SHYI-KAAN WU ; HSIN-CHIH LIN | Wear | 99 | 83 | |
168 | 2000 | An investigation of unbalanced-magnetron sputtered TiAlN films on SKH51 high-speed steel | Wu S.K.; Lin H.C.; HSIN-CHIH LIN ; PEI-LING LIU | Surface and Coatings Technology | 56 | 52 | |
169 | 2000 | Characterization of internal friction of Fe-30Mn-6Si-5Cr | Chou T.S.; Lin H.C.; Lin K.M.; SHYI-KAAN WU ; HSIN-CHIH LIN | Scripta Materialia | 9 | 7 | |
170 | 2000 | Wire drawing conducted in the R-phase of TiNi shape memory alloys | Wu S.K.; Lin H.C.; Yen Y.C.; SHYI-KAAN WU ; HSIN-CHIH LIN | Materials Letters | 21 | 20 | |
171 | 2000 | Study on the machining characteristics of TiNi shape memory alloys | Lin H.C.; Lin K.M.; Chen Y.C.; HSIN-CHIH LIN | Journal of Materials Processing Technology | |||
172 | 2000 | The wire electro-discharge machining characteristics of TiNi shape memory alloys | Lin H.C.; Lin K.M.; Cheng I.S.; HSIN-CHIH LIN | High Temperature Material Processes | |||
173 | 2000 | Interface of sputter-deposited TiNi thin film on (100) Si wafer | Wu S.K.; Wang J.Y.; Wu I.J.; Lin H.C.; HSIN-CHIH LIN | Materials Science Forum | |||
174 | 2000 | Welding characteristics of Fe-based shape memory alloys | Lin H.C.; Lin K.M.; Chuang Y.C.; Chou T.S.; Chen F.H.; HSIN-CHIH LIN | Materials Science Forum | |||
175 | 2000 | Welding characteristics of Fe-30Mn-6Si and Fe-30Mn-6Si-5Cr shape memory alloys | Lin H.C.; Lin K.M.; Chuang Y.C.; Chou T.S.; HSIN-CHIH LIN | Journal of Alloys and Compounds | |||
176 | 1999 | Multi-strengthening effects on the martensitic transformation temperatures of TiNi shape memory alloys | Wu S.K.; Lin H.C.; SHYI-KAAN WU ; HSIN-CHIH LIN | Journal of Materials Science | 10 | 11 | |
177 | 1999 | Study on the machinability of a Ti49.6Ni50.4 shape memory alloy | Wu S.K.; Lin H.C.; SHYI-KAAN WU ; HSIN-CHIH LIN | Materials Letters | 94 | 87 | |
178 | 1999 | A study of TiNiV ternary shape memory alloys | Lin H.C.; Lin K.M.; Chang S.K.; HSIN-CHIH LIN ; CHAO-SUNG LIN | Journal of Alloys and Compounds | 35 | 31 | |
179 | 1999 | The laser machining characteristics of TiNi shape memory alloys | Lin H.C.; Lin K.M.; Chen Y.C.; HSIN-CHIH LIN | High Temperature Material Processes | |||
180 | 1999 | Gas nitriding of an equiatomic TiNi shape-memory alloy: Part I: Nitriding parameters and microstructure characterization | Wu S.K.; Lin H.C.; Lee C.Y.; HSIN-CHIH LIN | Surface and Coatings Technology | |||
181 | 1999 | Cavitation-resistant TiNi films deposited by using cathodic arc plasma ion plating | He J.L.; Won K.W.; Chang C.T.; Chen K.C.; Lin H.C.; HSIN-CHIH LIN | Wear | |||
182 | 1999 | Gas nitriding of an equiatomic TiNi shape memory alloy: II. Hardness, wear and shape memory ability | Wu S.K.; Lin H.C.; Lee C.Y.; HSIN-CHIH LIN | Surface and Coatings Technology | |||
183 | 1998 | The deformation texture in a Ti 49 Ni 51 alloy | Chou T.S.; Wu S.K. ; HSIN-CHIH LIN | Scripta Materialia | 2 | 2 | |
184 | 1998 | TiNi-based high temperature shape memory alloys | Wu S.K.; Lin H.C.; HSIN-CHIH LIN | 1996 International Conference on Displacive Phase Transformations and their Applications in Materials Engineering | |||
185 | 1998 | Dry sliding wear of TiNi shape memory alloys | Liao H.M.; Lin H.C.; He J.L.; Chen K.C.; Lin K.M.; HSIN-CHIH LIN | 1996 International Conference on Displacive Phase Transformations and their Applications in Materials Engineering | |||
186 | 1997 | Ion nitriding of TiNi shape memory alloys I. Nitriding parameters and microstructure characterization | Wu S.K.; Chu C.L.; Lin H.C.; HSIN-CHIH LIN | Surface and Coatings Technology | |||
187 | 1997 | A study of vacuum carburization of an equiatomic TiNi shape memory alloy | Wu S.K.; Lee C.Y.; Lin H.C.; HSIN-CHIH LIN | Scripta Materialia | |||
188 | 1997 | Wear-resistance of TiNi intermetallics with TiN coating | Lin H.C.; Liao H.M.; He J.L.; Lin K.M.; Chen K.C.; HSIN-CHIH LIN | TMS Annual Meeting | |||
189 | 1997 | Wear characteristics of ion-nitrided Ti50Ni50 shape memory alloys | Lin H.C.; Liao H.M.; He J.L.; Lin K.M.; Chen K.C.; HSIN-CHIH LIN | Surface and Coatings Technology | |||
190 | 1997 | Elastic interaction between screw dislocations and a circular surface crack | Lin K.M.; Lin H.C.; Chen K.C.; Chang H.L.; HSIN-CHIH LIN | Materials Science and Engineering A | |||
191 | 1997 | Wear characteristics of TiNi shape memory alloys | Lin, H. C.; Liao, H. M.; He, J. L.; Chen, K. C.; Lin, K. M.; HSIN-CHIH LIN | Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science | 75 | ||
192 | 1997 | Ion nitriding of equiatomic TiNi shape memory alloys II. Corrosion properties and wear characteristics | Wu S.K.; Chu C.L.; Lin H.C.; HSIN-CHIH LIN | Surface and Coatings Technology | |||
193 | 1996 | A study on the wire drawing of TiNi shape memory alloys | Wu S.K. ; Lin H.C. ; Y.C. Yen | Materials Science and Engineering A | 48 | 47 | |
194 | 1996 | Elastic interaction between a coherent interface and a finite crack | Lin K.M.; Lin H.C.; Wang S.D.; HSIN-CHIH LIN | Physica Status Solidi (A) Applied Research | |||
195 | 1996 | A study of Fe-30Mn-6Si shape memory alloys prepared from different melting techniques | Lin H.C.; Lin K.M.; Chou T.S.; HSIN-CHIH LIN | Scripta Materialia | |||
196 | 1996 | An investigation of martensitic transformation in an Fe-30Mn-6Si shape memory alloy | Lin H.C.; Lin K.M.; HSIN-CHIH LIN | Scripta Materialia | |||
197 | 1996 | Extended dislocations around a semi-infinite crack | Lin K.M.; Lin H.C.; Chen K.C.; HSIN-CHIH LIN | Engineering Fracture Mechanics | |||
198 | 1995 | Shape-memory intermetallics development in Taiwan | Wu S.K.; Lin H.C.; HSIN-CHIH LIN | Acta Metallurgica Sinica Series A, Physical Metallurgy & Materials Science | |||
199 | 1994 | The tensile behavior of a cold-rolled and reverse-transformed equiatomic TiNi alloy | Lin H.C. ; SHYI-KAAN WU | Acta Metallurgica Et Materialia | 110 | 106 | |
200 | 1994 | The martensitic transformation in Ti-rich TiNi shape memory alloys | Lin H.C. ; SHYI-KAAN WU ; Lin J.C. | Materials Chemistry and Physics | 69 | 62 | |
201 | 1993 | Damping Characteristics of TiNi Shape Memory Alloys | 林新智 ; Lin, H. C.; Wu, Shyi-Kaan ; Chang, Y. C.; Yeh, M. T. | 1993 Annual Conference of the Chinese Society for Materials Science, 1993 | |||
202 | 1993 | Determination of Heat of Transformation in a Cold-Rolled Martensitic TiNi Alloy | 林新智 ; 吳錫侃 | Metallurgical Transactions A | 85 | ||
203 | 1993 | Damping characteristics of TiNi shape memory alloys | Lin, H.C.; Wu, S.K.; SHYI-KAAN WU ; HSIN-CHIH LIN | Metallurgical Transactions A | 115 | 101 | |
204 | 1992 | Effects of hot rolling on the martensitic transformation of an equiatomic TiNi alloy | Lin H.C. ; SHYI-KAAN WU | Materials Science and Engineering A | 26 | 25 | |
205 | 1992 | Strengthening effect on shape recovery characteristic of the equiatomic TiNi alloy | Lin H.C. ; SHYI-KAAN WU | Scripta Metallurgica et Materiala | 75 | 74 | |
206 | 1991 | The effects of cold rolling on the martensitic transformation of an equiatomic TiNi alloy | HSIN-CHIH LIN ; SHYI-KAAN WU ; Chou T.S.; Kao H.P. | Acta Metallurgica Et Materialia | 243 | 235 | |
207 | 1991 | Heat of premartensitic transformation in an aged Ti49Ni51 alloy | HSIN-CHIH LIN ; SHYI-KAAN WU | Scripta Metallurgica et Materiala | 27 | 23 | |
208 | 1991 | The effect of precipitation hardening on the Ms temperature in a Ti49.2Ni50.8 alloy | Wu S.K.; SHYI-KAAN WU ; HSIN-CHIH LIN | Scripta Metallurgica et Materiala | 15 | 18 | |
209 | 1990 | A study of electrical resistivity, internal friction and shear modulus on an aged Ti 49 Ni 51 alloy | SHYI-KAAN WU ; HSIN-CHIH LIN ; Chou T.S. | Acta Metallurgica Et Materialia | 127 | 124 | |
210 | 1989 | Transformation temperatures of martensite and premartensite in an aged Ti 49 Ni 51 alloy | SHYI-KAAN WU ; HSIN-CHIH LIN ; Chou T.S. | Scripta Metallurgica | 14 | 12 |