| 公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 |
1 | 2008 | Infrared brazing of Ti?6Al?4V and 17-4 PH stainless steel with (Ni)/Cr barrier layer(s) | Shiue, R. K.; Wu, S. K.; Shiue, J.Y.; ShiueRK ; WuSK | Materials Science and Engineering: A | | | |
2 | 2008 | Infrared brazing of Ti50Al50 and Ti?6Al?4V using two Ti-based filler metals | Shiue, R. K.; Wu, S. K.; Chen, Y.T.; Shiue, C.Y.; ShiueRK ; WuSK | Intermetallics | | | |
3 | 2008 | Low-frequency damping properties of dual-phase Mg-xLi-0.5Zn alloys | Wu, S.K.; Chang, S.H.; Chou, T.Y.; Tong, S.; WuSK | Journal of Alloys and Compounds | | | |
4 | 2007 | Investigation of the photo-catalytic coating on AZ91 alloy | Wang, Jian-Yih; Tsai, Hao-Jan; Uan, Jun-Yen; Wong, Ming-Show; Wu, Shyi-Kaan | Journal of Alloys and Compounds | | | |
5 | 2007 | The improvement of high-temperature oxidation of α2-Ti3Al by anodic coating in the phosphoric acid with sodium silicate | Wu, S.K.; Yang, Mu-Rong; You, J.R.; WuSK | Intermetallics | | | |
6 | 2006 | Electrical resistivity of Ti–Ni binary and Ti–Ni–X (X = Fe, Cu) ternary shape memory alloys | Wu, S.K.; Lin, H.C.; Lin, T.Y.; WuSK ; LinHC | Materials Science and Engineering A | | | |
7 | 2006 | Electrical resistivity of Ti-Ni binary and Ti-Ni-X (X = Fe, Cu) ternary shape memory alloys | Wu, S.K.; Lin, H.C.; Lin, T.Y.; WuSK | Materials Science and Engineering A | | | |
8 | 2006 | Infrared brazing of Ti-6Al-4V and 17-4 PH stainless steel with a nickel barrier layer | Shiue, R. K.; Wu, S. K.; Chan, C. H.; Huang, C. S.; ShiueRK ; WuSK | Metallurgical and Materials Transactions A | 54 | | |
9 | 2004 | Interfacial reactions of rf-sputtered TiNi thin films on (100) silicon with a SiN diffusion barrier | Wu, S.K.; Su, J.J.; Wang, J.Y.; WuSK | Philosophical Magazine A | | | |
10 | 2004 | 形狀記憶合金性能增進之研究─總計畫(2/3) | 吳錫侃 | | | | |
11 | 2004 | A Study of r.f.-Sputtered Al and Ni Thin Films on AZ91D Magnesium Alloy | Wu, S.K.; Yen, S-C; Chou, T.S.; WuSK | Surface and Coatings Technology | | | |
12 | 2004 | 形狀記憶合金性能增進之研究─子計畫一--增進鈦鎳形狀記憶合金超彈性及制震能之研究(2/3) | 吳錫侃 | | | | |
13 | 2003 | Damping Characteristics of TiNi Binary and Ternary Shape Memory Alloys | Wu, S.K.; Lin, H.C.; WuSK | Journal of Alloys and Compounds | | | |
14 | 2003 | Effect of Composition on Transformation Temperatures of Ni-Mn-Ga Shape Memory Alloys | Wu, S.K.; Yang, S.T.; WuSK | Materials Letters | | | |
15 | 2002 | 鈦鎳形狀記憶合金之工程應用開發研究─子計畫一--鈦鎳形狀記憶合金變態時物理性質變化之探討及其工程應用開發研究 | 吳錫侃 | | | | |
16 | 2002 | 新NI-MN-GA磁彈型形狀記憶合金之研究(3/3) | 吳錫侃 | | | | |
17 | 2002 | 鈦鎳形狀記憶合金之工程應用開發研究─總計畫 | 吳錫侃 | | | | |
18 | 2002 | Crystallization Behavior of R.F.-Sputtered Near Stoichiometric Ni2MnGa Thin Films | Wu, S.K.; Tseng, K.H.; Wang, J.Y.; WuSK | Thin Solid Films | | | |
19 | 2001 | Interfacial microstructures of rf-sputtered TiNi shape memory alloy thin films on (100) silicon | Wu, S. K.; Chen, J. Z.; Wu, Y. J.; Wang, J. Y.; Yu, M. N.; Chen, F. R.; Kai, J. J.; WuSK | Philosophical Magazine A | | | |
20 | 2001 | 介金屬紅外線快速加熱接合及其界面之研究(3/3) | 吳錫侃 | | | | |
21 | 2001 | Phenomenological Analysis of Martensitic Transformation in Cold-Rolled TiNi-base Shape Memory Alloys | Wu, S. K.; Lin, H. C.; Chen, S. H.; WuSK | Materials Chemistry and Physics | | | |
22 | 2000 | The Wire Drawing Conducted in The R-phase of TiNi Shape Memory Alloys | Wu, S. K.; Lin, H. C.; Yen, Y. C.; Chen, J. C.; WuSK | Materials Letters | | | |
23 | 2000 | An Investigation of Unbalanced-Magnetron Sputtered TiAlN Films on SKH51 High-Speed Steel | Wu, S.K.; Lin, H.C.; Liu, P.L.; WuSK | Surface and Coatings Technology | | | |
24 | 2000 | Composition Control of r.f.-Sputtered Ti50Ni40Cu10 Thin Films Using Optical Emission Spectroscopy | Wu, S.K.; Chen, Y.S.; Chen, J.Z.; WuSK | Thin Solid Films | | | |
25 | 2000 | Martensitic Transformation of A Ti-rich Ti40.5Ni49.5Zr10 Shape Memory Alloys | Wu, S.K.; Hsieh, S.F.; WuSK | Journal of Alloys and Compounds | | | |
26 | 2000 | Recent Development of TiNi-based Shape Memory Alloys in Taiwan | Wu, S.K.; Lin, H.C.; WuSK | Materials Chemistry and Physics | | | |
27 | 1999 | Gas Nitriding of An Equatomic TiNi Shape Memory Alloy, I: Nitriding Parameters and Microstructure Characterization | Wu, S.K.; Lin, H.C.; Lee, C.Y.; WuSK | Surface and Coatings Technology | | | |
28 | 1999 | Multi-Strengthening Effects on The Martensitic Transformation Temperatures of TiNi Shape Memory Alloys | Wu, S.K.; Lin, H.C.; Cheng, P.C.; WuSK | Journal of Materials Science | | | |
29 | 1999 | Gas nitriding of an equiatomic TiNi shape memory alloy II. Hardness, wear and shape memory ability | Wu, S.K.; Lin, H.C.; Lee, C.Y.; WuSK | Surface and Coatings Technology | | | |
30 | 1999 | A study on the machinability of a Ti49.6Ni50.4 shape memory alloy | Wu, S.K.; Lin, H.C.; Chen, C.C.; WuSK | Materials Letter | | | |
31 | 1997 | Ion nitriding of equiatomic TiNi shape memory alloys II. Corrosion properties and wear characteristics | Wu, S.K.; Lin, H.C.; Chu, C.L.; WuSK | Surface and Coatings Technology | | | |
32 | 1997 | Ion nitriding of TiNi shape memory alloys I. Nitriding parameters and microstructure characterization | Wu, S.K.; Lin, H.C.; Chu, C.L.; WuSK | Surface and Coatings Technology | | | |
33 | 1996 | A Study on the Wire Drawing of TiNi Shape Memory Alloys | Wu, S.K.; Lin, H.C.; Yen, Y.C.; WuSK | Materials Science and Engineering A | | | |
34 | 1995 | Shape Memory Intermetallics Development in Taiwan | Wu, S. K.; Lin, H. C.; WuSK | Acta Metallurgica Sinica (English Letters) | | | |
35 | 1993 | Determination of Heat of Transformation in a Cold-Rolled Martensitic TiNi Alloy | 林新智 ; 吳錫侃 | Metallurgical Transactions A | 85 | | |