第 1 到 170 筆結果,共 170 筆。
公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 | |
---|---|---|---|---|---|---|---|
1 | 2020 | An approach to improve cutting performance in micromilling of titanium alloy | Liao Y.-S; Li T.-H; Liu Y.-C.; YUNN-SHIUAN LIAO | Journal of Micro and Nano-Manufacturing | |||
2 | 2020 | The effects of different slurry concentrations and wire speeds for swinging and non-swinging wire-saw machining | YAO-YANG TSAI ; Chen, Y.-C.; YUNN-SHIUAN LIAO ; Hsieh, C.-C.; Tsao, C.-C.; Hsu, C.-Y. | Processes | |||
3 | 2020 | Slicing ceramics on material removed by a single abrasive particle | Tsai, Y.-Y.; Wu, M.-C.; Liao, Y.-S.; Tsao, C.-C.; Hsu, C.-Y.; YUNN-SHIUAN LIAO ; YAO-YANG TSAI | Materials | 1 | ||
4 | 2019 | Assessment of liver cirrhosis for patients with Child's A classification before hepatectomy using dynamic contrast-enhanced MRI | YUNN-SHIUAN LIAO ; Lee, L. W.; Yang, P. H.; Kuo, L. M.; Kuan, L. Y.; WEN-YIH TSENG ; Hwang, D. W. | Clinical Radiology | 5 | 4 | |
5 | 2019 | LTD PKG. (Liquid Thermal Dissipation Package) Technology | Huang, Y.L.; Chung, C.K.; Lin, C.F.; Xu, B.; Liao, Y.S.; YUNN-SHIUAN LIAO | Proceedings of Technical Papers - International Microsystems, Packaging, Assembly, and Circuits Technology Conference, IMPACT | |||
6 | 2018 | Study of the EDM performance to produce a stable process and surface modification | Liang, J.F.; Liao, Y.S.; Kao, J.Y.; Huang, C.H.; Hsu, C.Y.; YUNN-SHIUAN LIAO | International Journal of Advanced Manufacturing Technology | |||
7 | 2018 | Design of an Experiment to Study the Corner Collapse in Wire EDM | 梁瑞芳(Jui-Fang Liang); 廖運炫(Yunn-Shiuan Liao); 廖運炫 | 中國機械工程學刊 | |||
8 | 2018 | A Study of the Debris Exclusion for Various Cross-section Electrodes in Linear Motor Equipped Deep Cavity EDM Process | Liao, Y.S.; Liang, F.Y.; YAO-YANG TSAI ; YUNN-SHIUAN LIAO | Procedia CIRP | 2 | 0 | |
9 | 2017 | Scratch-induced crack propagation on C-plane sapphire | Wang N; Jiang F; Hu Z; Liao Y.-S.; YUNN-SHIUAN LIAO | ISAAT 2017 - Proceedings of the 20th International Symposium on Advances in Abrasive Technology | |||
10 | 2017 | An improved approach for the lapping of sapphire | Liao Y.S; Chang S.L.; YUNN-SHIUAN LIAO | ISAAT 2017 - Proceedings of the 20th International Symposium on Advances in Abrasive Technology | |||
11 | 2017 | Study of oil-water ratio and flow rate of MQL fluid in high speed milling of Inconel 718 | Liao, Y.-S.; Liao, C.-H.; Lin, H.-M.; YUNN-SHIUAN LIAO | International Journal of Precision Engineering and Manufacturing | |||
12 | 2017 | 單點鑽石超精密車削碳化鎢之研究 | 廖怜怡; 廖運炫 | 機械工業雜誌 | |||
13 | 2016 | Study of Vibration Assisted Inclined feed Micro-EDM Drilling | Liao, Y.S.; Liang, H.W.; YUNN-SHIUAN LIAO | Procedia CIRP | |||
14 | 2015 | 3D Printing Bioceramic Porous Scaffolds with Good Mechanical Property and Cell Affinity | CHIH-HAO CHANG ; Chih-Yang Lin; Fwu-Hsing Liu; Mark Hung-Chih Chen; CHUN-PIN LIN ; HONG-NERNG HO ; Yunn-Shiuan Liao; YUNN-SHIUAN LIAO | PLOS ONE | |||
15 | 2014 | Methods to measure wire deflection in wire EDM machining | Liang, J.-F.; Liao, Y.S.; YUNN-SHIUAN LIAO | International Journal of Automation Technology | |||
16 | 2014 | Study of machining parameters optimization for different materials in WEDM | Liao, Y.-S.; Chuang, T.-J.; Yu, Y.-P.; YUNN-SHIUAN LIAO | International Journal of Advanced Manufacturing Technology | |||
17 | 2014 | Cutting Performance of Diamond-like Carbon Coated Tips in Ultrasonic Osteotomy | Y.S. Liao; T.C Lin; C.Y. Lai; H.H. Chang; C.P. Lin; YUNN-SHIUAN LIAO | Journal of Dental Science | |||
18 | 2013 | An Improved CVDD bur in Ultrasonic Dental System for Enamel Removal | Y.S. Liao; C.L. Lee; K.T. Liao; YUNN-SHIUAN LIAO | Procedia CIRP 5 | |||
19 | 2013 | A Method for Determining the Nose Radius of Unequal Nose Radius Multi-Point Threading Tool | C.N. Chen; C.H. Liao; Y.S. Liao; YUNN-SHIUAN LIAO | J. of Advanced Mechanical Design, Systems, and Manufacturing | |||
20 | 2013 | A method for determining the nose radius of an unequal nose radius multi-point threading tool | Chen, C.-N.; Liao, C.-H.; Liao, Y.-S.; YUNN-SHIUAN LIAO | Journal of Advanced Mechanical Design, Systems and Manufacturing | |||
21 | 2013 | Study of Debris Exclusion Effect in Linear-Equipped Die-Sinking EDM process | Y.S. Liao; P.S. Wu; F.Y. Liang; YUNN-SHIUAN LIAO | Procedia CIRP 6 | |||
22 | 2013 | An improved CVDD bur used in ultrasonic dental system for enamel removal | Liao, Y.S.; Lee, C.L.; Liao, K.T.; YUNN-SHIUAN LIAO | Procedia CIRP | |||
23 | 2013 | Study of debris exclusion effect in linear motor equipped die-sinking EDM process | Liao, Y.S.; Wu, P.S.; Liang, F.Y.; YUNN-SHIUAN LIAO | Procedia CIRP | |||
24 | 2013 | An approach to improve machined surface finish in micro milling | Liao, Y.S.; Huang, C.L.; YUNN-SHIUAN LIAO | Advanced Materials Research | |||
25 | 2013 | On-line workpiece height estimation and its application in servo feed control of WEDM process | Liao, Y.-S.; Chuang, T.-J.; Yu, Y.-P.; YUNN-SHIUAN LIAO | Procedia CIRP | |||
26 | 2013 | Selective laser sintering of bio-metal scaffold | Liu, F.-H.; Lee, R.-T.; Lin, W.-H.; Liao, Y.-S.; YUNN-SHIUAN LIAO | Procedia CIRP | |||
27 | 2013 | A study of a strategy for threading titanium alloy | Liao, Y.-S.; Chen, C.-N.; YUNN-SHIUAN LIAO | Advanced Materials Research | |||
28 | 2013 | A study to improve drilling quality of electrochemical discharge machining (ECDM) process | Laio, Y.S.; Wu, L.C.; Peng, W.Y.; YUNN-SHIUAN LIAO | Procedia CIRP | |||
29 | 2012 | Ultrasonic vibration assisted mechanical chemical polishing (MCP) of silicon carbide | Liao, Y.S.; Yu, Y.P.; Huang, C.W.; YUNN-SHIUAN LIAO | Advanced Materials Research | |||
30 | 2011 | Selective laser gelation of ceramic-matrix composites | Liu, Fwu-Hsing; Shen, Yung-Kang; Liao, Yunn-Shiuan | Composites Part B: Engineering | 25 | 16 | |
31 | 2011 | A study of the tool change timing in turning micro V-grooves roller | Liao, Y.-S.; Lin, Z.-Z.; YUNN-SHIUAN LIAO | Proceedings of SPIE - The International Society for Optical Engineering | 0 | 0 | |
32 | 2011 | Bioceramic scaffolds fabrication by rapid prototyping technology | F.H. Liu; S.H. Chen; R.T. Lee; W.S. Lin; Y.S. Liao; YUNN-SHIUAN LIAO | World Academy of Science Engineering and Technology | |||
33 | 2010 | Fabrication of inner complex ceramic parts by selective laser gelling | Liu, Fwu-Hsing; Liao, Yunn-Shiuan | Journal of the European Ceramic Society | 38 | 31 | |
34 | 2010 | Effects of cutting fluid with nano particles on the grinding of titanium alloys | Liao, Y.S.; Yu, Y.P.; Chang, C.H.; YUNN-SHIUAN LIAO | Advanced Materials Research | |||
35 | 2010 | Diamond pad conditioners with oriented polycrystalline diamond cubes | Lin, T.-W.; Chen, Y.-T.; Liao, Y.-S.; Chen, J.-S.; Lin, C.-Y.; Sung, J.C.; YUNN-SHIUAN LIAO | Advanced Materials Research | |||
36 | 2010 | Rapid manufacturing of metal-ceramic composites | Liu, F.-H.; Ni, T.-Y.; Liao, Y.-S.; Shen, Y.-K.; Ting, K.; YUNN-SHIUAN LIAO | Key Engineering Materials | |||
37 | 2010 | Advanced Materials Research: Preface | Liao, Y.-S.; Chen, C.-C.A.; YUNN-SHIUAN LIAO | Advanced Materials Research | |||
38 | 2010 | Vibration assisted scribing process on LCD glass substrate | Liao, Y.S.; Yang, G.M.; Hsu, Y.S.; YUNN-SHIUAN LIAO | International Journal of Machine Tools and Manufacture | |||
39 | 2010 | CIMDW - A new technique of corona ignited micro-discharge in microwelding | Liao, Y.S.; Lin, J.Y.; Chung, Y.C.; Yang, T.Y.; YUNN-SHIUAN LIAO | Advanced Materials Research | |||
40 | 2010 | Cutting force prediction in ball-end milling with inclined feed by means of geometrical analysis | Tsai, Chung-Liang; Liao, Yunn-Shiuan | The International Journal of Advanced Manufacturing Technology | 19 | 18 | |
41 | 2010 | Fabrication of micro ball joint by using micro-EDM and electroforming | Lin, Chang-Sheng; Liao, Yunn-Shiuan ; Cheng, Yi-Ting; Lai, Yunn-Cheng | Microelectronic Engineering | 6 | 5 | |
42 | 2009 | A method of etching and powder blasting for microholes on brittle materials | Liao, Y.S.; YUNN-SHIUAN LIAO | Journal of Materials Processing Technology | 8 | 8 | |
43 | 2009 | Investigation of the wear of the pad conditioner in chemical mechanical polishing process | Liao, Y.S.; Yang, C.T.; YUNN-SHIUAN LIAO | Advanced Materials Research | |||
44 | 2009 | Development of a micro hole measuring system based on the capacitance principle | Chang, T.-Y.; Liao, Y.-S.; Liu, W.-C.; YUNN-SHIUAN LIAO | Measurement Science and Technology | |||
45 | 2009 | Novel diamond conditioner dressing characteristics of CMP polishing pad | Tsai, M.-Y.; Chen, S.-T.; Liao, Y.-S.; Sung, J.; YUNN-SHIUAN LIAO | International Journal of Machine Tools and Manufacture | |||
46 | 2009 | Effect of geometrical characteristics of a scribing wheel on the bending strength of LCD glass substrates | Y.S. Liao; G.M. Yang; Y.S. Hsu; YUNN-SHIUAN LIAO | Journal of the SID | |||
47 | 2009 | An on-line pulse trains analysis system of the wire-EDM process | Liao, Y.S.; Cheng, M.P.; YUNN-SHIUAN LIAO | Journal of Materials Processing Technology | 13 | 9 | |
48 | 2009 | Dressing characteristics of oriented single diamond on cmp polyurethane pad | Tsai, M.Y.; YUNN-SHIUAN LIAO | Machining Science and Technology | 29 | 25 | |
49 | 2009 | Effect of geometrical characteristics of a scribing wheel on the bending strength of LCD glass substrates | Liao, Y.S.; Yang, G.M.; YUNN-SHIUAN LIAO | Journal of the Society for Information Display | 6 | 4 | |
50 | 2008 | 線切割放電加工精度 - 鼓形量改善之研究 (新制多年期第1年) | 廖運炫 | ||||
51 | 2008 | 多工型臥式高精密微小4軸CNC加工機之研發及其應用-總計畫:多工型臥式高精密微小4軸CNC加工機之研發及其應用(3/3) | 廖運炫 | ||||
52 | 2008 | 微放電加工機高效能與高精度化技術之研究 (新制多年期第2年) | 廖運炫 | ||||
53 | 2008 | Formability of the Layer Additive Ceramic Part | Liu, Fwu Hsing; Liao, Yunn Shiuan ; Wang, Hsiu Ping | Materials Science Forum | 0 | 0 | |
54 | 2008 | Wear behavior in turning high hardness alloy steel by CBN tool | Lin, H.M.; Liao, Y.S.; YUNN-SHIUAN LIAO | Wear | 94 | 62 | |
55 | 2008 | Prediction of cutting forces in ball-end milling by means of geometric analysis | Tsai, Chung-Liang; Liao, Yunn-Shiuan | Journal of Materials Processing Technology | 40 | ||
56 | 2008 | Formability of the layer additive ceramic part | Liu, F.-H.; Liao, Y.-S.; Wang, H.-P.; YUNN-SHIUAN LIAO | Materials Science Forum | |||
57 | 2008 | An on-line monitoring system for a micro electrical discharge machining (micro-EDM) process | Liao, Y.S.; Chang, T.Y.; Chuang, T.J.; YUNN-SHIUAN LIAO | Journal of Micromechanics and Microengineering | |||
58 | 2008 | Efficient techniques for BEM rank-deficiency electrostatic problems | Chyuan, Shiang-Woei; Liao, Yunn-Shiuan ; Chen, Jeng-Tzong | Journal of Electrostatics | 5 | ||
59 | 2008 | Robust optimum designs of fibre-reinforced composites with design-variable and non-design-variable uncertainties | Liao, Y.-S.; Chiou, C.-Y.; YUNN-SHIUAN LIAO | Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications | |||
60 | 2008 | Diffractive beam splitting microlens for fiber coupling fabricated by UV imprinting process | Yang, Jauh Jung; Chen, Chi-Feng; Liao, Yunn-Shiuan | Optics Communications | |||
61 | 2008 | Behaviors of end milling Inconel 718 superalloy by cemented carbide tools | Liao, Y.S.; Lin, H.M.; Wang, J.H.; LiaoYS | Journal of Materials Processing Technology | 143 | ||
62 | 2008 | A dual-directional light-control film with a high-sag and high-asymmetrical-shape microlens array fabricated by a UV imprinting process | Lin, T.-W.; Chen, C.-F.; Yang, J.-J.; YUNN-SHIUAN LIAO | Journal of Micromechanics and Microengineering | 16 | 14 | |
63 | 2008 | Wear Behaviors in Turning High Hardness Alloy Steel by CBN Tool | Liao, Y.S.; Wei, C.C.; LiaoYS | Wear | |||
64 | 2007 | 微放電加工機高效能與高精度化技術之研究 (新制多年期第1年) | 廖運炫 | ||||
65 | 2007 | 多工型臥式高精密微小4軸CNC加工機之研發及其應用-子計畫一:微奈米加工技術研發(3/3) | 廖運炫 | ||||
66 | 2007 | Fabrication of long hexagonal micro-lens array by applying gray-scale lithography in micro-replication process | Yang, Jauh-Jung; Liao, Yunn-Shiuan ; Chen, Chi-Feng | Optics Communications | 45 | ||
67 | 2007 | 非接觸式清潔系統及其清潔方法 | 廖運炫 | ||||
68 | 2007 | 微陣列探針的製作方法 | 廖運炫 | ||||
69 | 2007 | Feasibility study of the minimum quantity lubrication in high-speed end milling of NAK80 hardened steel by coated carbide tool | Liao, Y.S.; Lin, H.M.; Chen, Y.C.; LiaoYS | International Journal of Machine Tools and Manufacture | 111 | ||
70 | 2007 | Adaptive control of the WEDM process using a self-tuning fuzzy logic algorithm with grey prediction | Liao, Y.S.; Chen, Y.M.; LiaoYS | The International Journal of Advanced Manufacturing Technology | |||
71 | 2007 | Feasibility Study of the Ultrasonic Vibration Assisted Drilling of Inconel 718 Superalloy | Y.S. Liao; Y.C. Chen; H.M. Lin; YUNN-SHIUAN LIAO | International Journal of Machine Tools and Manufacture | |||
72 | 2007 | Mechanism of minimum quantity lubrication in high-speed milling of hardened steel | Liao, Y.S.; Lin, H.M.; LiaoYS | International Journal of Machine Tools and Manufacture | 139 | ||
73 | 2007 | Servo design of a vertical axis drive using dual linear motors for high speed electric discharge machining | Hsieh, Min-Fu; Tung, Chin-Juei; Yao, Wu-Sung; Wu, Meng-Chieh; Liao, Yunn-Shiuan | International Journal of Machine Tools and Manufacture | 55 | ||
74 | 2007 | Single diamond dressing characteristics of CMP polyurethane pad | Liao, Y.S.; Tsai, M.Y.; Sung, J.C.; Pai, Y.L.; YUNN-SHIUAN LIAO | Key Engineering Materials | |||
75 | 2007 | The study of rapid prototyping process with embedded functional inserts | Liao, Y.S.; Li, H.C.; Chen, M.T.; LiaoYS | Journal of Materials | 9 | ||
76 | 2007 | Feasibility study of the ultrasonic vibration assisted drilling of Inconel superalloy | Liao, Y.S.; Chen, Y.C.; Lin, H.M.; LiaoYS | International Journal of Machine Tools and Manufacture | 119 | ||
77 | 2007 | Study of machining characteristics of small and deep hole in EDM drilling | Huang J.T; YUNN-SHIUAN LIAO ; Su C.C. | Proceedings of the 15th International Symposium on Electromachining, ISEM 2007 | 2 | ||
78 | 2006 | Robust optimum designs of fiber-reinforced composites using constraints with sensitivity | Liao, Yunn Shiuan ; Chiou, Chwei Yuh | Journal of Composite Materials | |||
79 | 2006 | 線切割放電加工機構 | 廖運炫 | ||||
80 | 2006 | A novel technique for the fabrication of herringbone grooves in a dynamic thrust bearing combining UV-LIGA with electro-discharge machining | Kuo, J.S.; Chiu, K.T.; Hsu, S.W.; PING-HEI CHEN ; YUNN-SHIUAN LIAO | Microsystem Technologies | 5 | 5 | |
81 | 2006 | 微細線張力控制機構 | 廖運炫 | ||||
82 | 2006 | Erratum: A novel technique for the fabrication of herringbone grooves in a dynamic thrust bearing combining UV-LIGA with electro-discharge machining (Microsyst Technol (2006) 12 (529-536)DOI: 10.1007/s00542-005-0053-3) | Kuo, J.S.; Chiu, K.T.; Hsu, S.W.; PING-HEI CHEN ; YUNN-SHIUAN LIAO | Microsystem Technologies | 0 | 0 | |
83 | 2006 | Fabrication of diffractive optical lens for beam splitting using LIGA process | Yang, J.J.; Liao, Y.S.; Chen, C.F.; YUNN-SHIUAN LIAO | 2006 IEEE International Conference on Mechatronics and Automation | |||
84 | 2006 | Eight-phase-level diffractive microlens for beam splitting using LIGA-lIke Process | Yang, J.-J.; Liao, Y.-S.; Chen, C.-F.; YUNN-SHIUAN LIAO | Japanese Journal of Applied Physics | |||
85 | 2006 | Development of a Novel Micro Wire-EDM Mechanism for the Fabricating of Micro Parts | Lin, Chang Sheng; Liao, Yunn Shiuan; Chen, Shun Tong; YUNN-SHIUAN LIAO | Materials Science Forum | |||
86 | 2006 | Determination of Mask Opening Size in Creating Fluid Hole on Brittle Material by Double-Side Sand Blasting | Liao, Y.S.; Chen, L.C.; LiaoYS ; ChenLC | The International Journal of Advanced Manufacturing Technology | |||
87 | 2006 | Autoresonant Tuning and Control in Ultrasonic Vibration Assisted Drilling Process | Chen, Yu Chieh; Liao, Yunn Shiuan; Fan, J.D.; YUNN-SHIUAN LIAO | Materials Science Forum | |||
88 | 2006 | Study of Hole-Machining on Pyrex Wafer by Electrochemical Discharge Machining (ECDM) | Liao, Yunn Shiuan; Peng, Wen Yang; YUNN-SHIUAN LIAO | Materials Science Forum | |||
89 | 2006 | 線切割放電加工機構 | 廖運炫 ; 陳順同; 林常盛 | ||||
90 | 2006 | 複合式模具製作方法 | 廖運炫 | ||||
91 | 2006 | Study of laminated object manufacturing with separately applied heating and pressing | Liao, Y.S.; Li, H.C.; Chiu, Y.Y.; LiaoYS | The International Journal of Advanced Manufacturing Technology | |||
92 | 2006 | Determination of mask opening size in creating a fluid hole on brittle material by double-side sand blasting | Liao, Y.S.; YUNN-SHIUAN LIAO ; Chen, L.C. | International Journal of Advanced Manufacturing Technology | 2 | 4 | |
93 | 2006 | 微細線張力控制機構 | 廖運炫 ; 陳順同; 林常盛 | ||||
94 | 2005 | 複合式加工機構 | 廖運炫 ; 林清章; 陳順同; 林常盛 | ||||
95 | 2005 | Surface morphology and sub-surface damaged layer of various glasses machined by 193 nm ArF excimer laser | Liao, Y.-S.; Chen, Y.-T.; Chao, C.-L.; Liu, Y.-M.; Chao, Choung-Lii; YUNN-SHIUAN LIAO ; Liao, Yunn-shiuan | Progress in Biomedical Optics and Imaging - Proceedings of SPIE | 12 | 0 | |
96 | 2005 | Precision fabrication of an arrayed micro metal probe by the laser-LIGA process | Liao, Y.-S.; YUNN-SHIUAN LIAO | Journal of Micromechanics and Microengineering | 17 | 15 | |
97 | 2005 | Study of the Heating-And-Pressing Separation Process of Laminated Object Manufacturing (LOM) | Y.S. Liao; H.C. Li; Y.Y. Chiu; YUNN-SHIUAN LIAO | International Journal of Advanced Manufacturing Technology | |||
98 | 2005 | Fabrication of high aspect ratio microstructure arrays by micro reverse wire-EDM | Liao, Y.-S.; Chen, S.-T.; Lin, C.-S.; Chuang, T.-J.; YUNN-SHIUAN LIAO | Journal of Micromechanics and Microengineering | |||
99 | 2005 | Development of a high precision tabletop versatile CNC wire-EDM for making micro intricate parts | Y.S. Liao; S.T. Chen; C.S. Lin; YUNN-SHIUAN LIAO | Journal of Micromechanics and Microengineering | |||
100 | 2005 | Fabrication of High Aspect Ratio Microstructure Array by Micro Reverse Wire-EDM | Y.S. Liao; S.T. Chen; C.S. Lin; YUNN-SHIUAN LIAO | Journal of Micromechanics and Microengineering | |||
101 | 2005 | 複合式加工機構 | 廖運炫 | ||||
102 | 2005 | Computational Study of the Effect of Finger Width and Aspect Ratios for the Electrostatic Levitating Force of MEMS Combdrive | Liao, Y.S.; Chyuan, S,W.; Chen, J.T.; LiaoYS | Journal of Microelectromechanical Systems | |||
103 | 2005 | Development of a High Precision Tabletop Versatile CNC Wire-EDM for Making Intricate Micro Parts | Liao, Y.S.; Chen, S.T.; Lin, C.S.; LiaoYS | Journal of Micromechanics and Microengineering | |||
104 | 2004 | An efficient technique for solving the arbitrarily multilayered electrostatic problems with singularity arising from a degenerate boundary | Chyuan, Shiang-Woei; Liao, Yunn-Shiuan ; Chen, Jeng-Tzong | Semiconductor Science and Technology | |||
105 | 2004 | 快速原型之架橋式層狀成形方法 | 廖運炫 ; 邱雲堯; 侯健材 | ||||
106 | 2004 | 快速原型之架橋式層狀成形方法 | 廖運炫 | ||||
107 | 2004 | Efficaciously Modeling Exterior Electrostatic Problems with Singularity for Electron Devices | Liao, Y.S.; Chyuan, S,W.; Chen, J.T.; LiaoYS | Circuits and Devices Magazine | |||
108 | 2004 | An efficient technique for th arbitrarily multilayered electrostatic problems with singularity arising from degenerate boundary | Y.S. Liao; S.W. Chyuan; J.T. Chen; YUNN-SHIUAN LIAO | Semiconductor science and technology | |||
109 | 2004 | The energy aspect of maerial property in Wire-EDM and its application | Y.S. Liao; Y.P. Yu; YUNN-SHIUAN LIAO | Journal of materials processing technology | |||
110 | 2004 | FEM versus BEM | Liao, Y.-S.; Chyuan, S.-W.; Chen, J.-T.; YUNN-SHIUAN LIAO | IEEE Circuits and Devices Magazine | |||
111 | 2004 | Slicing strategies to obtain accuracy of feature relation in rapidly prototyped parts | Chiu, Y.Y.; Liao, Y.S.; Lee, S.C.; YUNN-SHIUAN LIAO | International Journal of Machine Tools and Manufacture | |||
112 | 2004 | An alternative efficient method (DBEM) for simulating the electrostatic field and levitating force of a MEM combdrive | Y.S. Liao; S.W. Chyuan; J.T. Chen; YUNN-SHIUAN LIAO | Journal of micromechanics and microengineering | |||
113 | 2004 | An efficient technique for solving the arbitrarily multilayered electrostatic problems with singularity arising from a degenerate boundary | Chyuan, S.-W.; Liao, Y.-S.; Chen, J.-T.; YUNN-SHIUAN LIAO | Semiconductor Science and Technology | |||
114 | 2004 | Computational study of variations in gap size for the electrostatic levitating force of MEMS device using dual BEM | Chyuan, S.-W.; Liao, Y.-S.; Chen, J.-T.; YUNN-SHIUAN LIAO | Microelectronics Journal | |||
115 | 2004 | The energy aspect of material property in WEDM and its application | Liao, Y.S.; Yu, Y.P.; YUNN-SHIUAN LIAO | Journal of Materials Processing Technology | |||
116 | 2004 | Numerical studies of variations in gap бо finger width ratio and traveled distance for the driving force of RF MEMS device using Dual BEM | Y.S. Liao; S.W. Chyuan; J.T. Chen; YUNN-SHIUAN LIAO | Proceedings of the institution of mechanical engineers, Part C: Journal of mechanical science | |||
117 | 2004 | Efficaciously modeling the exterior electrostatic problems with singularity for electron devices | Y.S. Liao; S.W. Chyuan; J.T. Chen; YUNN-SHIUAN LIAO | IEEE, Circuits and devices magazine | |||
118 | 2004 | A study of the characteristics of the diamond dresser in the CMP process | Y.S. Liao; P.W. Hong; C.T. Yang; YUNN-SHIUAN LIAO | Key engineering materials | |||
119 | 2004 | A study to achieve a fine surface finish in Wire-EDM | Liao, Y.S.; Huang, J.T.; Chen, Y.H.; YUNN-SHIUAN LIAO | Journal of Materials Processing Technology | |||
120 | 2004 | Computational study of variations in gap size for the electrostatic levitating force of MEM device using Dual BEM | S.W. Chyuan; Y.S. Liao; J.T Chen; YUNN-SHIUAN LIAO | Microelectronics journal | |||
121 | 2004 | The Energy Aspect of Material Property in WEDM and its Application | Liao, Y.S.; Yu, Y.P.; LiaoYS | Journal of Material Processing Technology | |||
122 | 2004 | Study of electrochemical discharge machining technology for slicing non-conductive brittle materials | Peng, W.Y.; Liao, Y.S.; YUNN-SHIUAN LIAO | Journal of Materials Processing Technology | |||
123 | 2004 | Waste Removal Laminate Layering Rapid Prototyping Machine | 廖運炫 | ||||
124 | 2004 | Numerical studies of variations in the gap and finger width ratio and travelled distance for the driving force of a radio-frequency microelectromechanical system device using the dual boundary element method | Liao, Y.S.; Chyuan, S,W.; Chen, J.T.; LiaoYS | Proceedings of the Institution of Mechanical Engineers | 1 | ||
125 | 2004 | 多工型精密微放電創成加工機之研發與相關製程技術之研究(1/3) | 廖運炫 | ||||
126 | 2004 | A Study to Achieve a Fine Surface Finish in Wire-EDM | Liao, Y.S.; Huang, J.T.; Chen, Y.H.; LiaoYS | Journal of Material Processing Technology | |||
127 | 2004 | 金屬薄殼快速模具技術之研究 | 廖運炫 | ||||
128 | 2004 | An alternatively efficient method (DBEM) for simulating the electrostatic field and levitating force of a MEMS combdrive | Liao, Y.S.; Chyuan, S.W.; Chen, J.T.; LiaoYS | Journal of Micromechanics and Microengineering | |||
129 | 2004 | 精密線切割放電加工之研究(1/3) | 廖運炫 | ||||
130 | 2004 | Study of Specific Discharge Energy in WEDM and its Application | Liao, Y.S.; Yu, Y.P.; LiaoYS | International Journal of Machine Tools and Manufacture | 76 | ||
131 | 2003 | 高速銑削模具鋼之研究(3/3) | 廖運炫 | ||||
132 | 2003 | 放電銑削製程之研究(3/3) | 廖運炫 | ||||
133 | 2003 | Automatic fabrication for bridged laminated object manufacturing (LOM) process | Chiu, Y.Y.; Liao, Y.S.; YUNN-SHIUAN LIAO | Journal of Materials Processing Technology | 18 | 15 | |
134 | 2003 | Self-tuning fuzzy control with a grey prediction for wire rupture prevention in WEDM | Lee, W.M.; Liao, Y.S.; YUNN-SHIUAN LIAO | International Journal of Advanced Manufacturing Technology | |||
135 | 2003 | An efficient method for solving electrostatic problems | Chyuan, S.-W.; Liao, Y.-S.; Chen, J.-T.; YUNN-SHIUAN LIAO | Computing in Science and Engineering | |||
136 | 2003 | Laser path planning of burn-out zone for LOM process | Y.Y. Chiu; Y.S. Liao; YUNN-SHIUAN LIAO | Rapid prototyping journal | |||
137 | 2003 | Laser path planning of burn-out rule for LOM process | Chiu, Y.Y.; Liao, Y.S.; YUNN-SHIUAN LIAO | Rapid Prototyping Journal | |||
138 | 2003 | An efficient mehtod for solving electrostatic problems | S.W. Chyuan; Y.S. Liao; J.T. Chen; YUNN-SHIUAN LIAO | ||||
139 | 2003 | A new approach of online waste removal process for laminated object manufacturing (LOM) | Liao, Y.S.; Chiu, L.C.; Chiu, Y.Y.; YUNN-SHIUAN LIAO | Journal of Materials Processing Technology | |||
140 | 2003 | A new approach of waste removal process for laminated object manufacturing (LOM) | Y.S. Liao; L.C. Chiu; Y.Y. Chiu; YUNN-SHIUAN LIAO | Journal of materials processing technology | |||
141 | 2003 | Study on wear mechanisms in drilling of Inconel 718 superalloy | Chen, Y.C.; Liao, Y.S.; YUNN-SHIUAN LIAO | Journal of Materials Processing Technology | |||
142 | 2003 | Optimization of machining parameters of Wire-EDM based on Grey relational and statistical analyses | Huang, J.T.; Liao, Y.S.; YUNN-SHIUAN LIAO | International Journal of Production Research | |||
143 | 2003 | Self-tuning fuzzy control with grey prediction for wire rupture prevention in WEDM | W.M. Lee; Y.S. Liao; YUNN-SHIUAN LIAO | International journal of advanced manufacturing technology | |||
144 | 2003 | Study ofwear mechanisms in drilling of Inconel 718 superalloys | Y.S. Liao; Y.C. Chen; YUNN-SHIUAN LIAO | Journal of materials processing technology | |||
145 | 2003 | A New Approach of Online Waste Removal Process for Laminated Object Manufacturing (LOM) | Liao, Y.S.; Chiu, L.C.; Chiu, Y.Y.; LiaoYS | Journal of Materials Processing Technology | |||
146 | 2003 | Study on wear mechanisms in drilling of Inconel 718 superalloy | Liao, Y.S.; Chen, Y.C.; LiaoYS | Journal of Materials Processing Technology | |||
147 | 2003 | Study of electrical discharge machining technology for slicing silicon ingots | Peng, W.Y.; YUNN-SHIUAN LIAO | Journal of Materials Processing Technology | 72 | 48 | |
148 | 2003 | 金屬薄殼與樹脂填充內襯之快速模具製程研究 | 廖運炫 | ||||
149 | 2002 | 放電銑削製程之研究(2/3) | 廖運炫 | ||||
150 | 2002 | A Neural Network Approach for the On-line Estimation of Workpiece Height in WEDM | Liao, Y.S.; Yan, M.T.; Chang, C.C.; LiaoYS | Journal of Materials Processing Technology | 33 | ||
151 | 2002 | 高速銑削模具鋼之研究(2/3) | 廖運炫 | ||||
152 | 2001 | 高速銑削模具鋼之研究(1/3) | 廖運炫 | ||||
153 | 2001 | 放電銑削製程之研究(1/3) | 廖運炫 | ||||
154 | 2001 | 頂面具有黏膠之薄片基層快速原型方法及其裝置 | 廖運炫 | ||||
155 | 2001 | On-line estimation of workpiece height by using neural networks and hierarchical adaptive control of WEDM | Yan, M.T.; Liao, Y.S.; Chang, C.C.; YUNN-SHIUAN LIAO | International Journal of Advanced Manufacturing Technology | |||
156 | 2001 | 選擇性撥除廢料之薄片積層快速原型製造方法及裝置 | 廖運炫 | ||||
157 | 2001 | 線切割放電加工工件厚度之線上估測 | 廖運炫 ; 余永平 | 台大工程學刊 | |||
158 | 2001 | A New Slicing Procedure for Rapid Prototyping Systems | Liao, Y.S.; Chiu, Y.Y.; LiaoYS | The International Journal of Advanced Manufacturing Technology | |||
159 | 2001 | 可調法布里- 珀羅截光器之可行性研究 | 顏國安; 周正三; 廖運炫 | 台大工程學刊 | |||
160 | 2001 | Adaptive crosshatch approach for the laminated object manufacturing (LOM) process | Liao, Y.S.; Chiu, Y.Y.; LiaoYS | International Journal of Production Research | 9 | ||
161 | 2001 | 薄片基層快速原型方法及其裝置 | 廖運炫 | ||||
162 | 2000 | Design of a Fuzzy Controller for the Adaptive control of WEDM Process | Liao, Y.S.; Woo, J.C.; LiaoYS | International Journal of Machine Tools and Manufacture | 38 | ||
163 | 2000 | Thermal model of the wet grinding process | Liao, Y.S.; Luo, S.Y.; Yang, T.H.; YUNN-SHIUAN LIAO | Journal of Materials Processing Technology | |||
164 | 2000 | A wire-EDM maintenance and fault-diagnosis expert system integrated with an artificial neural network | Huang, J.T.; Liao, Y.S.; YUNN-SHIUAN LIAO | International Journal of Production Research | |||
165 | 2000 | 人工智能化的形雕放電加工 | 廖運炫 | ||||
166 | 2000 | 快速原型加工之新的切層策略研究 | 廖運炫 ; 邱雲堯 | 台大工程學刊 | |||
167 | 2000 | 球型銑刀之三維立體銑削分析 | 廖運炫 ; 蔡忠良 | 台大工程學刊 | |||
168 | 2000 | 產學合作計畫:智慧型線切割式放電加工機之研發(3/3) | 廖運炫 | ||||
169 | 2000 | 搖動式放電加工參數自動設定系統 | 廖運炫 ; 陳益原 | 台大工程學刊 | |||
170 | 2000 | A thermal model of the wet grinding process | Liao, Y.S.; Luo, S.Y.; Yang, T.H.; LiaoYS | Journal of Materials Processing Technology |