第 1 到 50 筆結果,共 50 筆。
公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 | |
---|---|---|---|---|---|---|---|
1 | 2011 | Selective laser gelation of ceramic-matrix composites | Liu, Fwu-Hsing; Shen, Yung-Kang; Liao, Yunn-Shiuan | Composites Part B: Engineering | 25 | 16 | |
2 | 2010 | Fabrication of inner complex ceramic parts by selective laser gelling | Liu, Fwu-Hsing; Liao, Yunn-Shiuan | Journal of the European Ceramic Society | 38 | 31 | |
3 | 2010 | Cutting force prediction in ball-end milling with inclined feed by means of geometrical analysis | Tsai, Chung-Liang; Liao, Yunn-Shiuan | The International Journal of Advanced Manufacturing Technology | 19 | 18 | |
4 | 2010 | Fabrication of micro ball joint by using micro-EDM and electroforming | Lin, Chang-Sheng; Liao, Yunn-Shiuan ; Cheng, Yi-Ting; Lai, Yunn-Cheng | Microelectronic Engineering | 6 | 5 | |
5 | 2008 | 多工型臥式高精密微小4軸CNC加工機之研發及其應用-總計畫:多工型臥式高精密微小4軸CNC加工機之研發及其應用(3/3) | 廖運炫 | ||||
6 | 2008 | Prediction of cutting forces in ball-end milling by means of geometric analysis | Tsai, Chung-Liang; Liao, Yunn-Shiuan | Journal of Materials Processing Technology | 40 | ||
7 | 2008 | Wear Behaviors in Turning High Hardness Alloy Steel by CBN Tool | Liao, Y.S.; Wei, C.C.; LiaoYS | Wear | |||
8 | 2008 | Diffractive beam splitting microlens for fiber coupling fabricated by UV imprinting process | Yang, Jauh Jung; Chen, Chi-Feng; Liao, Yunn-Shiuan | Optics Communications | |||
9 | 2008 | Behaviors of end milling Inconel 718 superalloy by cemented carbide tools | Liao, Y.S.; Lin, H.M.; Wang, J.H.; LiaoYS | Journal of Materials Processing Technology | 143 | ||
10 | 2008 | Efficient techniques for BEM rank-deficiency electrostatic problems | Chyuan, Shiang-Woei; Liao, Yunn-Shiuan ; Chen, Jeng-Tzong | Journal of Electrostatics | 5 | ||
11 | 2007 | 多工型臥式高精密微小4軸CNC加工機之研發及其應用-子計畫一:微奈米加工技術研發(3/3) | 廖運炫 | ||||
12 | 2007 | The study of rapid prototyping process with embedded functional inserts | Liao, Y.S.; Li, H.C.; Chen, M.T.; LiaoYS | Journal of Materials | 9 | ||
13 | 2007 | Adaptive control of the WEDM process using a self-tuning fuzzy logic algorithm with grey prediction | Liao, Y.S.; Chen, Y.M.; LiaoYS | The International Journal of Advanced Manufacturing Technology | |||
14 | 2007 | Fabrication of long hexagonal micro-lens array by applying gray-scale lithography in micro-replication process | Yang, Jauh-Jung; Liao, Yunn-Shiuan ; Chen, Chi-Feng | Optics Communications | 45 | ||
15 | 2007 | Servo design of a vertical axis drive using dual linear motors for high speed electric discharge machining | Hsieh, Min-Fu; Tung, Chin-Juei; Yao, Wu-Sung; Wu, Meng-Chieh; Liao, Yunn-Shiuan | International Journal of Machine Tools and Manufacture | 55 | ||
16 | 2007 | Mechanism of minimum quantity lubrication in high-speed milling of hardened steel | Liao, Y.S.; Lin, H.M.; LiaoYS | International Journal of Machine Tools and Manufacture | 139 | ||
17 | 2007 | Feasibility study of the ultrasonic vibration assisted drilling of Inconel superalloy | Liao, Y.S.; Chen, Y.C.; Lin, H.M.; LiaoYS | International Journal of Machine Tools and Manufacture | 119 | ||
18 | 2007 | Feasibility study of the minimum quantity lubrication in high-speed end milling of NAK80 hardened steel by coated carbide tool | Liao, Y.S.; Lin, H.M.; Chen, Y.C.; LiaoYS | International Journal of Machine Tools and Manufacture | 111 | ||
19 | 2006 | Study of laminated object manufacturing with separately applied heating and pressing | Liao, Y.S.; Li, H.C.; Chiu, Y.Y.; LiaoYS | The International Journal of Advanced Manufacturing Technology | |||
20 | 2006 | Determination of Mask Opening Size in Creating Fluid Hole on Brittle Material by Double-Side Sand Blasting | Liao, Y.S.; Chen, L.C.; LiaoYS ; ChenLC | The International Journal of Advanced Manufacturing Technology | |||
21 | 2005 | Computational Study of the Effect of Finger Width and Aspect Ratios for the Electrostatic Levitating Force of MEMS Combdrive | Liao, Y.S.; Chyuan, S,W.; Chen, J.T.; LiaoYS | Journal of Microelectromechanical Systems | |||
22 | 2005 | Development of a High Precision Tabletop Versatile CNC Wire-EDM for Making Intricate Micro Parts | Liao, Y.S.; Chen, S.T.; Lin, C.S.; LiaoYS | Journal of Micromechanics and Microengineering | |||
23 | 2004 | An efficient technique for solving the arbitrarily multilayered electrostatic problems with singularity arising from a degenerate boundary | Chyuan, Shiang-Woei; Liao, Yunn-Shiuan ; Chen, Jeng-Tzong | Semiconductor Science and Technology | |||
24 | 2004 | The Energy Aspect of Material Property in WEDM and its Application | Liao, Y.S.; Yu, Y.P.; LiaoYS | Journal of Material Processing Technology | |||
25 | 2004 | A Study to Achieve a Fine Surface Finish in Wire-EDM | Liao, Y.S.; Huang, J.T.; Chen, Y.H.; LiaoYS | Journal of Material Processing Technology | |||
26 | 2004 | Numerical studies of variations in the gap and finger width ratio and travelled distance for the driving force of a radio-frequency microelectromechanical system device using the dual boundary element method | Liao, Y.S.; Chyuan, S,W.; Chen, J.T.; LiaoYS | Proceedings of the Institution of Mechanical Engineers | 1 | ||
27 | 2004 | 金屬薄殼快速模具技術之研究 | 廖運炫 | ||||
28 | 2004 | An alternatively efficient method (DBEM) for simulating the electrostatic field and levitating force of a MEMS combdrive | Liao, Y.S.; Chyuan, S.W.; Chen, J.T.; LiaoYS | Journal of Micromechanics and Microengineering | |||
29 | 2004 | 精密線切割放電加工之研究(1/3) | 廖運炫 | ||||
30 | 2004 | Study of Specific Discharge Energy in WEDM and its Application | Liao, Y.S.; Yu, Y.P.; LiaoYS | International Journal of Machine Tools and Manufacture | 76 | ||
31 | 2004 | Efficaciously Modeling Exterior Electrostatic Problems with Singularity for Electron Devices | Liao, Y.S.; Chyuan, S,W.; Chen, J.T.; LiaoYS | Circuits and Devices Magazine | |||
32 | 2003 | A New Approach of Online Waste Removal Process for Laminated Object Manufacturing (LOM) | Liao, Y.S.; Chiu, L.C.; Chiu, Y.Y.; LiaoYS | Journal of Materials Processing Technology | |||
33 | 2003 | 高速銑削模具鋼之研究(3/3) | 廖運炫 | ||||
34 | 2003 | 放電銑削製程之研究(3/3) | 廖運炫 | ||||
35 | 2003 | Study on wear mechanisms in drilling of Inconel 718 superalloy | Liao, Y.S.; Chen, Y.C.; LiaoYS | Journal of Materials Processing Technology | |||
36 | 2003 | 金屬薄殼與樹脂填充內襯之快速模具製程研究 | 廖運炫 | ||||
37 | 2002 | A Neural Network Approach for the On-line Estimation of Workpiece Height in WEDM | Liao, Y.S.; Yan, M.T.; Chang, C.C.; LiaoYS | Journal of Materials Processing Technology | 33 | ||
38 | 2001 | 線切割放電加工工件厚度之線上估測 | 廖運炫 ; 余永平 | 台大工程學刊 | |||
39 | 2001 | 可調法布里- 珀羅截光器之可行性研究 | 顏國安; 周正三; 廖運炫 | 台大工程學刊 | |||
40 | 2001 | A New Slicing Procedure for Rapid Prototyping Systems | Liao, Y.S.; Chiu, Y.Y.; LiaoYS | The International Journal of Advanced Manufacturing Technology | |||
41 | 2001 | Adaptive crosshatch approach for the laminated object manufacturing (LOM) process | Liao, Y.S.; Chiu, Y.Y.; LiaoYS | International Journal of Production Research | 9 | ||
42 | 2000 | Design of a Fuzzy Controller for the Adaptive control of WEDM Process | Liao, Y.S.; Woo, J.C.; LiaoYS | International Journal of Machine Tools and Manufacture | 38 | ||
43 | 2000 | 人工智能化的形雕放電加工 | 廖運炫 | ||||
44 | 2000 | A thermal model of the wet grinding process | Liao, Y.S.; Luo, S.Y.; Yang, T.H.; LiaoYS | Journal of Materials Processing Technology | |||
45 | 1997 | The effects of machining settings on the behavior of pulse trains in the WEDM process | Liao, Y. S.; Woo, J. C.; LiaoYS | Journal of Materials Processing Technology | 57 | ||
46 | 1997 | A study on the machining-parameters optimization of wire electrical discharge machining | Liao, Y. S.; Huang, J. T.; Su, H. C.; LiaoYS | Journal of Materials Processing Technology | 169 | ||
47 | 1997 | Study of wire breaking process and monitoring of WEDM | Liao, Y. S.; Chu, Y. Y.; Yan, M. T.; LiaoYS | International Journal of Machine Tools and Manufacture | 71 | ||
48 | 1996 | A new on-line spindle speed regulation strategy for chatter control | Liao, Y. S.; Young, Y. C.; LiaoYS | International Journal of Machine Tools and Manufacture | 91 | ||
49 | 1996 | Carbide tool wear mechanism in turning of Inconel 718 superalloy | Liao, Y. S.; Shiue, R. H.; LiaoYS | Wear | |||
50 | 1993 | A Generalized Method For The Optimal Design Of Beams Under Flexural Vibration | Liao, Y. S.; LiaoYS | Journal of Sound and | 14 |