研究成果


第 1 到 163 筆結果，共 163 筆。

公開日期標題作者來源出版物scopusWOS全文
12023An innovative integrated approach to automatic defect detection system of cell phone case manufacturing in an empirical implementationLiao, Chao Chang; Hsu, Chih Ching; HONG-TSU YOUNG ; KUAN-MING LI Journal of Intelligent Manufacturing00
22022Characterization analysis of 532 nm laser drilling of silicon-based glass heterogeneous integration compositesLin, Che Shu; Tai, Chih Ho; Chen, Rou Jhen; KUAN-MING LI ; HONG-TSU YOUNG ; Hsiao, Wen TseInternational Journal of Advanced Manufacturing Technology00
32022Laser surface modification on rGO/ZnO composite materials for NO2 gas sensingLin, Che Shu; Hsieh, Hsin Fang; CHIEN-FANG DING ; KUAN-MING LI ; HONG-TSU YOUNG ; Hsiao, Wen TseMaterials Chemistry and Physics55
42022Applied IrO2 Buffer Layer as a Great Promoter on Ti-Doping V2O5 Electrode to Enhance Electrochromic Device PropertiesKo, Tien Fu; Chen, Po Wen; KUAN-MING LI ; HONG-TSU YOUNG Materials45
52022Ultraviolet Laser Sintering of Printed Nickel Oxide Nanoparticles for Thin-Film Thermistor via Aerosol Jet Printing TechnologyChang, Yi Tse; Hung, Kuan Yi; Chien, Chih Hsuan; HONG-TSU YOUNG ; Hsiao, Wen Tse; KUAN-MING LI Applied Sciences (Switzerland)00
62020Laser-induced backward transfer of conducting aluminum doped zinc oxide to glass for single-step rapid patterningDing, C.-F.; Li, L.; HONG-TSU YOUNG ; CHIEN-FANG DING Journal of Materials Processing Technology44
72019Evaluation of structural properties of AZO conductive films modification using low-temperature ultraviolet laser annealingDing, C.-F. ; Hsiao, W.-T.; HONG-TSU YOUNG Ceramics International1313
82019Factors influencing online group buying in taiwan: an empirical study based on the tpb frameworkHung, C.-C.; Cheng, N.-C.; Yu, S.-E.; Young, H.-T.; HONG-TSU YOUNG Lecture Notes of the Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering
92019An investigation of alliance portfolio diversity impact on firm performanceHung, C.-C.; Yu, S.-E.; Cheng, N.-C.; Wang, C.-H.; Chiang, W.-H.; Young, H.-T.; HONG-TSU YOUNG Lecture Notes of the Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering
102019Real time monitoring of fs laser annealing on indium tin oxideWu, P.-H.; Hu, C.-L.; Feng, S.-W.; Young, H.-T.; Lu, M.-Y.; Wang, H.-C.; HONG-TSU YOUNG Optics and Laser Technology
112019Evaluation of deep learning neural networks for surface roughness prediction using vibration signal analysisLin, W.-J.; Lo, S.-H.; Young, H.-T.; Hung, C.-L.; HONG-TSU YOUNG Applied Sciences (Switzerland)
122018Solution processable mixed-solvent exfoliated MoS <inf>2</inf> nanosheets for efficient and robust organic light-emitting diodesLiu, C.-W.; Wang, C.; Liao, C.-W.; Golder, J.; Tsai, M.-C.; Young, H.-T.; Chen, C.-T.; HONG-TSU YOUNG ; CHIH-I WU AIP Advances1010
132017The study of optimization on process parameters of high-accuracy computerized numerical control polishingHuang, W.-R.; Huang, S.-P.; Tsai, T.-Y.; Lin, Y.-J.; Yu, Z.-R.; Kuo, C.-H.; Hsu, W.-Y.; Young, H.-T.; HONG-TSU YOUNG Proceedings of SPIE - The International Society for Optical Engineering
142017The effect of optical system design for laser micro-hole drilling processDing, C.-F.; Lan, Y.-T.; Chien, Y.-L.; HONG-TSU YOUNG ; CHIEN-FANG DING Proceedings of SPIE - The International Society for Optical Engineering00
152017Effect on the electro-optical properties of transparent conducting aluminum doped zinc oxide thin films using low temperature ultraviolet laser annealingCHIEN-FANG DING ; Hsiao, W.-T.; HONG-TSU YOUNG Journal of Materials Science: Materials in Electronics77
162017A miniaturized nickel oxide thermistor via aerosol jet technologyWang C.; Hong G.-Y.; Li K.-M.; KUAN-MING LI ; HONG-TSU YOUNG Sensors (Switzerland)2620
172017Thermal-electrochemical coupled simulations for cell-to-cell imbalances in lithium-iron-phosphate based battery packsHuang, Hsuan-Han; HSUN-YI CHEN ; KUO-CHI LIAO ; HONG-TSU YOUNG ; Lee, Ching-Fei; Tien, Jhen-YangApplied Thermal Engineering2927
182017Tool condition monitoring with current signals for a low-power spindleWang C.; Huang M. ; Chung T.T.; Young H.T.; KUAN-MING LI ; HONG-TSU YOUNG 2017 IEEE International Conference on Applied System Innovation: Applied System Innovation for Modern Technology70
192016Unveiling Technology Development Through a New Patent Mining Classification MethodHuang, C.C; Young, H.T.; Wang, C.H.; Yang, S.C; HONG-TSU YOUNG the International Conference on Systematic Innovation
202016Highly sensitive non-enzymatic electrochemical glucose biosensor using a photolithography fabricated micro/nano hybrid structured electrodeHsu, C.-W.; Su, F.-C.; Peng, P.-Y.; Young, H.-T.; Liao, S.; Wang, G.-J.; HONG-TSU YOUNG Sensors and Actuators, B: Chemical
212016The Study of Optimal Parameters on Metal Surgical Guide Tubes Structure Design for Spinal Fusion SurgeryChang, Y.T; Chang, F.Y; Young, H.T.; Yeh, C.H.; HONG-TSU YOUNG International Conference on Advanced Manufacturing (ICAM2016)
222016The Image Quality Effect of Optical Path in Laser Processing System with Dynamic Focus ModuleDing, C.F.; Young, H.T.; HONG-TSU YOUNG the 5th International Conference on Nanomanufacturing (nanoMan 2016)
232016Study on Brain Phantom in Surgical TrainingLiu, K.T; Xiao, F.R; Young, H.T.; Huang, C.Y.; HONG-TSU YOUNG International Conference on Advanced Manufacturing (ICAM2016)
242016Study on CMP process of glass wafers with SiO2 based slurry for trench-glass-via interposerChen, C.-C.A.; Young, H.-T.; Chiou, C.-H.; Xue, M.-Y.; Pan, C.-L.; HONG-TSU YOUNG China Semiconductor Technology International Conference 2016
252016Robotic Surgical Assistant for Minimally Invasive Cranial SurgeryChen, D.Y; Xiao, F.R; Young, H.T.; Huang, C.Y.; HONG-TSU YOUNG International Conference on Advanced Manufacturing (ICAM2016)
262016The state of charge of electrodes and its effects on lithium-iron-phosphate battery simulationHuang, Hsuanhan; Chung W.L.; KUO-CHI LIAO ; Lee, Chingfei; Tien, Jhen Yang; HONG-TSU YOUNG ; HSUN-YI CHEN ECS Transactions20
272016AOI strategies for defects identification of micro-electro mechanical system elementsYoung, H.T.; Chiou, H.S.; Huang, W.R.; HONG-TSU YOUNG Advances in Materials and Processing Technologies
282016A Study of Alliance Portfolio Diversity Impact on Firm PerformanceHuang, C.C; Young, H.T.; Wang, C.H.; Chiang, W.H.; HONG-TSU YOUNG the International Conference on Applied Social Science and Information Technology (ASSIT 2016)
292015Investigation of silicon-based light emitting diode sub-mounts: Enhanced performance and potential for improved reliabilityHONG-TSU YOUNG ; KUAN-MING LI Materials Science in Semiconductor Processing33
302015Investigation of optimum assembly tolerance for a machine tool spindleHsieh, N.-K.; Young, H.-T.; HONG-TSU YOUNG Key Engineering Materials00
312015Study on CMP Process of Glass Wafers with SiO2 Based SlurryChen, C.C.; Young, H.T.; Chiou, C.H.; Xue, M.Y.; Pan C.L.; HONG-TSU YOUNG ISSAT International Conference Reliability and Quality in Design
322015A Novel Non-Enzymatic Electrochemical Glucose Sensor Based on a Simple Lithographic ProcessHsu, C.W.; Su, F.C.; Peng, P.Y; Young, H.T.; Yang, Mike; Wang, G.J.; HONG-TSU YOUNG ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2015)
332015Improvement of Silicon Substrate Strength by an Application of Semiconductor Metallization ProcessChen, Y.J.; Tang, C.W; Young, H.T.; Gou M.H.; HONG-TSU YOUNG International Manufacturing Conference in China (IMCC 2015)
342015A novel non-enzymatic electrochemical glucose biosensor based on a simple lithographic processHsu, C.-W.; Su, F.-C.; Peng, P.-Y.; Young, H.-T.; Yang, M.; Wang, G.-J.; HONG-TSU YOUNG ASME Design Engineering Technical Conference
352015High-speed spindle fault diagnosis with the empirical mode decomposition and multiscale entropy methodHsieh, N.-K.; Lin, W.-Y.; Young, H.-T.; HONG-TSU YOUNG Entropy
362015Measurement of the speed of light from extraterrestrial sourcesWu, J.; Huang, Y.-R.; Tsao, H.-W.; Lee, S.-L.; Chang, S.-T.; Tsay, H.-L.; HEN-WAI TSAO ; HONG-TSU YOUNG Proceedings of SPIE - The International Society for Optical Engineering00
372014Path Planning for Synchronization of Laser Galvanometric Scanner and Stage Motion SystemDing, C.F.; Tu, W.C.; Liu, Z.X.; Young, H.T.; HONG-TSU YOUNG he 4th International Conference on Nanomanufacturing (nanoMan 2014)
382014An intelligent fault diagnosis system for machine toolsWang, C.; Lin, W.-Y.; Young, H.-T.; HONG-TSU YOUNG International Journal of Automation and Smart Technology
392014Real-time Lithium-ion Battery Internal Condition Estimation and Fault DetectionLiao, P.H.; Li, K.; Chang C.J.; Yong, H.T.; HONG-TSU YOUNG 2014 IEEE International Conference on Automation Science and Engineering (CASE2014)
402014Design of Medical Robotic Navigation System Interface used in BiopsyChen, C.H.; Xiao, F.R.; Kuo, M.F.; Chiang, P.H.; Young, H.T.; HONG-TSU YOUNG The 13th NTU - Kyoto U - U of Tsukuba Joint Mini-symposium 2014
412014AOI Strategies for Defects Identification of Micro-Electro Mechanical System ElementsYoung, H.T.; Chiou, H.S.; Huang, W.R.; HONG-TSU YOUNG he 17th International Conference on Advances in Materials and Processing Technologies (AMPT 2014)
422014Special Optics Element Design in Enhancing Illumination Effects葉家宏(Chia-Hung Yeh); 曾仕杰(Shih-Chieh Tseng); 施景瑞(Ching-Jui Shih); 張復瑜(Fuh-Yu Chang); 楊宏智(Hong-Tsu Young); HONG-TSU YOUNG 中國機械工程學刊
432013A method of comparing the speed of starlight and the speed of light from a terrestrial sourceWu, J.; Chang, S.-T.; Tsao, H.-W.; Huang, Y.-R.; Lee, S.-L.; Chang, C.-C.; Lin, W.-C.; Tsay, H.-L.; Wang, Y.-L.; Huang, P.-H.; Hsu, M.-Y.; Hsu, C.-W.; Lin, S.-C.; Hung, Y.-J.; Shiu, Y.-L.; Hsiao, Y.-C.; Chang, J.-Y.; Tsai, D.P.; Huang, T.-M.; Young, H.-T.; Liu, Y.-C.; Chang, C.-M.; Chiang, W.-C.; Huang, J.-Y.; HEN-WAI TSAO ; HONG-TSU YOUNG Proceedings of SPIE - The International Society for Optical Engineering10
442013Improving the dielectric breakdown field of silicon light-emitting-diode sub-mount by a hybrid nanosecond laser drilling strategyTang, C.-W.; Li, K.-M.; Yang, M.; Liao, H.-C.; Young, H.-T.; HONG-TSU YOUNG ; KUAN-MING LI Microelectronics Reliability
452013Using Grey relational analysis to determine wet chemical etching parameters in through-silicon-via etching applicationTang, C.-W.; Young, H.-T.; HONG-TSU YOUNG Materials Science in Semiconductor Processing
462012Microlenticular lens replication by the combination of gas-assisted imprint technology and LIGA-like processHONG-TSU YOUNG Journal of Micromechanics and Microengineering55
472012Robust process design towards through-silicon via quality improvement based on Grey-Taguchi methodTang, C.-W.; Chuang, L.-C.; Young, H.-T.; Yang, M.; HONG-TSU YOUNG Applied Mechanics and Materials00
482012Microlenticular lens replication by the combination of gas-assisted imprint technology and LIGA-like processChia-Hung Yeh; Ching-Jui Shih; Hsuan-Cheng Wang; Fuh-Yu Chang; Hong-Tsu Young; Wen-Chuan Chang; HONG-TSU YOUNG J. Micromech. Microeng.
492012Study the keyhole welding performance with enthalpy method in upwind schemeHo, J.-E.; Young, H.T.; HONG-TSU YOUNG Advanced Science Letters
502012Enhancement of through silicon via (TSV) sidewall quality by nanosecond laser pulses with chemical etching processChao-Wei Tang; Hong-Tsu Young; Kuan-Ming Li; Shih-Chieh Tseng; HONG-TSU YOUNG International Conference on Advanced Manufacturing
512012Enhancement of Through Silicon VIA Sidewall Quality by Nanosecond Laser Pulses with Chemical Etching ProcessTang, C.W.; Tseng, S.C.; Young, H.T.; Li, K.M.; Yang, M.; Liao, H.C.; HONG-TSU YOUNG Advanced Materials Research
522012Transparent solar concentrator for flat panel displayYeh, Chia-Hung; Chang, Fuh-Yu; Young, Hong-Tsu; Hsieh, Tsung-Yen; Chang, Chia-Hsiung; HONG-TSU YOUNG Japanese Journal of Applied Physics
532012Innovative through-silicon-via formation approach for wafer-level packaging applicationsTang, C.W.; Young, H.T.; Li, K.M.; Tang, Chao Wei; Young, Hong Tsu; Li, Kuan Ming; HONG-TSU YOUNG ; KUAN-MING LI Journal of Micromechanics and Microengineering
542012Innovative through-silicon-via formation approach for wafer-level packaging applicationsChao-Wei Tang; Hong-Tsu Young; Kuan-Ming Li; HONG-TSU YOUNG J. Micromech. Microeng.
552012Improving the sidewall quality of nanosecond laser-drilled deep through-silicon vias by incorporating a wet chemical etching processChao-Wei Tang; Kuan-Ming Li; Hong-Tsu Young; HONG-TSU YOUNG Micro & Nano Letters
562012Special Optics Element Design in Enhancing Illumination EffectsChia-Hung Yeh; Fuh-Yu Chang; Hong-Tsu Young; HONG-TSU YOUNG International Conference on Advanced Manufacturing
572012Improving the sidewall quality of nanosecond laser-drilled deep through-silicon vias by incorporating a wet chemical etching processTang, C.-W.; Li, K.-M.; Young, H.-T.; HONG-TSU YOUNG ; KUAN-MING LI Micro and Nano Letters
582012Enhancement of through silicon via (TSV) sidewall quality by nanosecond laser pulses with chemical etching processTang, C.-W.; Young, H.-T.; HONG-TSU YOUNG ; KUAN-MING LI Advanced Materials Research10
592012Morphologic Characterization on Ablated PMMA by Femtosecond Laser PulsesFang-Fei Lin; Ting-Yu Yeng; Hong-Tsu Young; HONG-TSU YOUNG ADVANCED SCIENCE LETTERS
602012A Study of Phenomenon on the Surface of Steel Ablated by Femtosecond LaserLin, F. F.; Yeng, T.Y.; Chuang, L.C.; Young, H.T.; HONG-TSU YOUNG Advanced Science Letters
612011Reduction of 2D/3D image cross-talks with micro-optical elements by Nano-imprintYeh, C.-H.; Chang, F.-Y.; Wang, H.-C.; Chung, E.; Young, H.-T.; HONG-TSU YOUNG 11th International Conference of the European Society for Precision Engineering and Nanotechnology
622011Condition-based Shaft Faults Diagnosis with Empirical Mode Decomposition MethodLin, W.Y.; Young, H.T.; HONG-TSU YOUNG Proc. Instn Mech. Engrs., Part B, Journal of Engineering Manufacture, London
632011Online condition-based shaft faults diagnosis with multiscale entropyPan, Y.-H.; Wang, C.; Lin, W.-Y.; Wang, Y.-H.; HONG-TSU YOUNG ; Lee, Kuo TienProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture54
642011Development of diagnosis system for machine tool shaft inspectionHsieh, N.-K.; Lin, W.-Y.; HONG-TSU YOUNG Advanced Materials Research00
652011Enhancing fracture strength of thinned silicon dies by a hybrid micromachining methodLin, C.-C.; Young, H.-T.; Tang, C.-W.; Tsai, M.-Y.; HONG-TSU YOUNG International Journal of Abrasive Technology
662010Evaluating the micromachining rate of nanosecond laser with thermal analysisHo, J.-E.; HONG-TSU YOUNG Advanced Materials Research00
672010Modelling on dressing effects in chemical mechanical polishing with diamond dressersChen, K.-R.; Young, H.-T.; HONG-TSU YOUNG International Journal of Abrasive Technology
682010Does the Residual Stress of Backend Grinding Dominate the Warping Problems in Wafer Thinning ProcessChen, K.R.; Young, H.T.; HONG-TSU YOUNG 
692010Modeling on Dressing Effects in Chemical Mechanical Polishing with Diamond DressersChen, K.R.; Young, H.T.; HONG-TSU YOUNG Int. J. of Abrasive Technology
702010產學合作成果說明(昇陽_恩德)Hong-Tsu Young; HONG-TSU YOUNG 
712009Application of co-sputtered Cu-Ni micro metallic strain gage for structure response monitoringJenq, S.-T.; Wang, Y.-S.; Ting, J.-M.; Lo, H.-S.; Young, H.-T.; Chuang, L.-C.; Lin, H.-B.; HONG-TSU YOUNG Journal of Aeronautics, Astronautics and Aviation, Series A
722009Characterization of dressing behaviors and optimization technique in chemical mechanical polishingChen, K.R.; Young, H.T.; Chen, K.R.; Young, H.T.; HONG-TSU YOUNG ECS Transactions
732009Oxidation of Stainless Steel Induced by Femtosecond and Nanosecond Laser Ablation: A Comparative Raman StudyLin, F.F.; Young, H.T.; Wang, J.K.; HONG-TSU YOUNG COLA 2009 Proceedings
742009Approaches of aviation accident investigation in different cultural contexts from human factors perspectivesLi, W.-C.; Young, H.-T.; Wang, T.; Harris, D.; Li, L.-W.; HONG-TSU YOUNG Journal of Aeronautics, Astronautics and Aviation, Series A
752009Estimation of dressing effects in chemical mechanical polishing with sorts of diamond dressersChen, K.-R.; Young, H.-T.; Chen, K.R.; HONG-TSU YOUNG Advanced Materials Research30
762009Measuring the magnetization of nano ferro-fluid with D.C electromagnetic applicationHo, J.-E.; Young, H.T.; Young, H.T.; HONG-TSU YOUNG Journal of Nanoscience and Nanotechnology00
772008雷射加工關鍵技術在微奈米元件之開發研究　（新制多年期第1年）楊宏智 
782008矽晶圓加工之前瞻技術開發(2/2)楊宏智 
792008化學機械拋光鑽石修整器修整率模式與工業上的應用楊宏智; 鄭偉祥; 陳鯤仁; 蕭啟明; HONG-TSU YOUNG 第25屆全國機械工程研討會
802008超快雷射加工之研究與展望楊宏智(Hong-Tsu Young); 林芳妃(Fang-Fei Lin); 黃欣怡(Shin-Yi Huang); 楊宏智 科儀新知 
812008An Experimental Investigation on Silicon Wafer Thinning ProcessChuan-Chieh Lin; Hong-Tsu Young ; Jing-Pou Zhan中國機械工程學刊
822008Novel approach to fabrication of 3D micro-structures by laser machiningYoung, H.-T.; Lin, F.-F.; Hong, S.-B.; HONG-TSU YOUNG Key Engineering Materials
8320083D micro-scale profile measuring systemYoung, H.-T.; Lin, W.Y.; HONG-TSU YOUNG Key Engineering Materials
842008Precision wafer thinning and its surface conditioning techniqueYoung, H.-T.; Lin, C.-C.; Liao, H.-T.; Yang, M.; Young, H T.; Lin, C C.; Liao, H T.; Yang, M.; HONG-TSU YOUNG International Journal of Materials and Product Technology
852008The analysis on penetrating efficiency in high-energy beam drillingHo, J.-E.; Young, H.T.; HONG-TSU YOUNG Key Engineering Materials
862007太陽能燃料電池混合動力直接驅動車之研發與展示－子計畫四：太陽能燃料電池混合動力車車體結構設計及能量管理系統研發(3/3)楊宏智 
872007模組化腳踏車架組楊宏智 
882007The relationship between the location of obstacle and indoor particle depositionHo, J.-E.; Young, H.T.; HONG-TSU YOUNG Journal of Marine Science and Technology
892007Novel Method to Investigate the Critical Depth of Cut of Ground Si WaferYoung, H.T.; Liao, H.T.; HONG-TSU YOUNG Journal of Material Processing Technology
902007Integrated rough machining methodology for centrifugal impeller manufacturingChuang, L.-C.; Young, H.-T.; Chung, E.; HONG-TSU YOUNG International Journal of Advanced Manufacturing Technology
912007物質-場分析中各種場的心智圖建立林傳傑; 楊宏智; HONG-TSU YOUNG 中華萃思學會第二屆學術暨實務研討會
922007Study of the flow field and scalar transport of indoor ventilating space under the impact of coanda vortexHo, J.-E.; Young, H.-T.; HONG-TSU YOUNG Journal of Marine Science and Technology
932007Novel method to investigate the critical depth of cut of ground silicon waferYoung, H.T.; Liao, H.-T.; Huang, H.-Y.; HONG-TSU YOUNG Journal of Materials Processing Technology
942007Nonlinear penetrating behavior in high energy beam drillingHo, J.E.; Young, H.T.; HONG-TSU YOUNG 35th International MATADOR 2007 Conference
952006Surface integrity of silicon wafers in ultra precision machiningYoung, H.T.; Liao, H.-T.; Huang, H.-Y.; HONG-TSU YOUNG International Journal of Advanced Manufacturing Technology
962006多組矛盾對狀況下TRIZ創新法則之優先選用法林傳傑; 楊宏智; 康銘元; HONG-TSU YOUNG 中華萃思學會第一屆學術暨實務研討會
972006A fundamental modeling approach for nano-grinding of silicon wafersYoung, H. T.; Huang, H. Y.; Yang, Y. J.; HONG-TSU YOUNG Progress on Advanced Manufacture for Micro/Nano Technology 2005, Pt 1 and 2
982006A fundamental modeling approach for nano-grinding of silicon wafersYoung, H.T.; Huang, H.-Y.; Yang, Y.-J.; HONG-TSU YOUNG Materials Science Forum
992006Online dressing of profile grinding wheelsYoung, H.-T.; Chen, D.-J.; Young, H.T.; Chen, D.J.; HONG-TSU YOUNG International Journal of Advanced Manufacturing Technology
1002006Development of automatic 3D profile measuring systemYoung, H.-T.; Lin, W.; HONG-TSU YOUNG Proceedings of SPIE - The International Society for Optical Engineering
1012006A study on wafer thinning techniques with residual stress estimationYoung, H.-T.; Lin, C.-C.; Chang, M.-T.; Liao, H.-T.; HONG-TSU YOUNG 6th International Conference European Society for Precision Engineering and Nanotechnology, 2006
1022006Surface Integrity of Si Wafer in Ultra Precision Machining楊宏智; 廖錫田; 黃弘毅; HONG-TSU YOUNG Int. J. of Adv. Manuf. Technology
1032006運用TRIZ之迴避設計研究及其工程應用高彬淙; 楊宏智; HONG-TSU YOUNG 中華萃思學會第一屆學術暨實務研討會
1042005Quantitative reliability analysis of electronic packages in consideration of variability of model parametersWu, W.-F.; Lin, Y.-Y.; Young, H.-T.; HONG-TSU YOUNG 7th Electronics Packaging Technology Conference
1052004洗手台(臉盆)之高度調整裝置楊宏智 
1062004A five-axis rough machining approach for a centrifugal impellerYoung, H.-T.; Chuang, L.-C.; Gerschwiler, K.; Kamps, S.; HONG-TSU YOUNG International Journal of Advanced Manufacturing Technology
1072004供工具機使用之安全裝置及方法楊宏智 
1082004微鑽頭之精密加工研究(2/2)楊宏智 
1092004鑽石磨輪對成形砂輪之修整研究陳德楨; 楊宏智 台大工程學刊 
1102004Online Dressing of Profile Grinding WheelsYoung, H.T.; Chen, D.J.; YoungHT International Journal of Advanced Manufacturing Technology 
1112004Surface integrity of silicon wafers in ultra precision machiningYoung, H.T.; Liao, H.T.; Huang, H.Y.; YoungHT International Journal of Advanced Manufacturing Technology 
1122004矽晶圓輪磨技術效能提昇之應用分析楊宏智; 涂岐旭; HONG-TSU YOUNG 第21屆全國機械工程研討會
1132003微鑽頭之精密加工研究(1/2)楊宏智 
1142003The 5-axis Rough Machining Approach for Centrifugal Impeller楊宏智; 莊禮彰; HONG-TSU YOUNG Int. J. of Adv. Manuf. Technology
1152003An integrated machining approach for a centrifugal impellerYoung, H.-T.; Chuang, L.-C.; HONG-TSU YOUNG International Journal of Advanced Manufacturing Technology
1162003Integrated machining of a centrifugal impellerYoung, H.-T.; Chuang, L.-C.; HONG-TSU YOUNG Transactions of the North American Manufacturing Research Institution of SME
1172003An Integrated Machining Approach for a Centrifugal ImpellerYoung, H.-T.; Young, H.T.; Chuang, L.-C.; Chung, E.; YoungHT International Journal of Advanced Manufacturing Technology 
1182002五軸加工刀具路徑規劃(2/2)楊宏智 
1192002CNC五軸加工性能提昇研究楊宏智 
1202001五軸加工刀具路徑規劃(1/2)楊宏智 
1212001高速切削加工結構與伺服系統整合研究楊宏智 
1222000精密磨床熱誤差分析與補償楊宏智 ; 范光照第一屆海峽兩岸製造技術研討會論文集
1232000Application of Project Management to Materials Selection for Diversified Product Design ParametersYoung, H.T.; Kang, M.Y.; YoungHT The International Journal of Advanced Manufacturing Technology
1242000Application of project management to materials selection for diversified product design parametersKang, M.-Y.; Young, H.-T.; HONG-TSU YOUNG International Journal of Advanced Manufacturing Technology
1251999Project-management of diversified product design parameters for concurrent engineeringKang, M.-Y.; Young, H.-T.; HONG-TSU YOUNG Journal of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an
1261999CAM 五軸加工研究楊宏智 
1271998電腦整合製造規劃與導入研究-共通物料清單之建構楊宏智 
1281997模具設計與製造整合性研究(III)─子計畫三:模具機製參數之最佳化系統楊宏智 
1291997NC工具機加工精度與熱誤差之研究楊宏智 
1301996模具設計與製作整合性研究─模具設計與製造整合性研究(II)--子計畫四：模具機製參數之最佳化系統楊宏智 
1311995模具設計與製造性研究─模具設計與製造研究:子計畫(五)-機製參數之最佳化系統楊宏智 
1321995Investigation of edge effect from the chip-back temperature using IR thermographic techniquesHONG-TSU YOUNG Journal of Materials Processing Tech.97
1331995應用切削溫度訊號於刀具磨耗偵測楊宏智 
1341994Modelling of tool/chip interface temperature distribution in metal cuttingYoung, H.T.; Chou, T.L.; HONG-TSU YOUNG International Journal of Mechanical Sciences
1351994An integrated expert operation planning system with a feature-based design modelYoung, H.T.; Tsai, D.H.; HONG-TSU YOUNG The International Journal of Advanced Manufacturing Technology
1361994An analytical model of chatter vibration in metal cuttingTarng, Y.S.; Young, H.T.; Lee, B.Y.; HONG-TSU YOUNG International Journal of Machine Tools and Manufacture
1371994On the analysis of chip temperature distribution in orthogonal machiningYoung, H.T.; Liou, H.Y.; HONG-TSU YOUNG International Journal of Machine Tools and Manufacture
1381994Predicting cutting forces in face millingYoung, H.-T.; Mathew, P.; Oxley, P.L.B.; HONG-TSU YOUNG International Journal of Machine Tools and Manufacture
1391994Analysis of Plate Clamping Deformation with Magnetic ViseHuang, H. C.; Young, Hong-Tsu ; Lu, Shui-Shong; 楊宏智 ; 呂秀雄10th National Conference on Mechanical Engineering, the Chinese Society of Mechanical Engineers 
1401994切屑負載伺服補償之無偏擺化多刃精密切削研究(I)楊宏智 
1411993磁性夾具夾持下之工件變形分析黃鴻傑; Young, Hong-Tsu ; 呂秀雄; 楊宏智 中國機械工程學會第八屆學術研討會
1421993汽車鈑金沖壓模具之CAD/CAM楊宏智 
1431993Predicting the chip flow for nose radius tools under oblique machining conditionsYoung, H.-T.; Liao, Y.-S.; Yang, Y.-C.; Mathew, P.; HONG-TSU YOUNG Journal of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an
1441993Cutting Forces Prediction with Runout Effects in Face Milling OperationsYoung, Hong-Tsu ; Chang, Y. S.; 楊宏智 1993 Sino-German Joint Symposium on Precision and High Speed Manufacturing Technology 
1451993IR Thermographic Techniques Applied to Tool/Chip Interface Temperature Distribution in Metal CuttingYoung, Hong-Tsu ; Chang, W.; 楊宏智 US/Taiwan Symposium on Advanced Manufacturing Processes 
1461993加工製程單元之CAD/CAM 系統評估與選擇呂秀雄; 范光照; 楊宏智 ; Young, Hong-Tsu 
1471992摩擦壓接之熱塑性變形分析周祖亮; 楊宏智 ; Young, Hong-Tsu 第十六屆力學會議學術研討會 
1481991刀具幾何形狀改變對車削顫振之影響黃泰山; 唐永新; 楊宏智 ; Young, Hong-Tsu 第八屆全國機械工程學術研討會論文集 
1491991摩擦壓接之塑性變形分析楊宏智 
1501991Use of Knowledge-Based Operation Planning System in Integration CAD/CAMYoung, Hong-Tsu International Manufacturing Technology Conference 
1511990建立PROLOG 知識庫專家系統整合CAD/CAMYoung, Hong-Tsu ; 蔡東宏; 楊宏智 第七屆全國機械工程研討會 
1521990Experimental analysis of milling force pulsationYoung, Hong-Tsu; HONG-TSU YOUNG Journal of the Chinese Society of Mechanical Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao
1531990Cutting Temperature Responses to Flank WearYoung, Hong-Tsu Asia Pacific and Japan-China International Conference on Progress of Cutting and Grinding 
1541990Use of Knowledge-Based Operation Planning System in Integration CAD/CAMYoung, Hong-Tsu 
1551990The Mechanics of Machining:An Analytical Approach to Assessing MachinabilityOxley, P. L. B.; Young, Hong-Tsu ; 楊宏智 
1561990A strain-hardening slipline field analysis of the plastic deformation observed in a model asperity interaction experimentKopalinsky, E.M.; Oxley, P.L.B.; Young, H.T.; HONG-TSU YOUNG Journal of the Mechanics and Physics of Solids
1571990Modelling of Force Pulsations:A Fundamental Move to Precision Inprovement in MillingYoung, Hong-Tsu NSC-DFG Joint Symposium on Precision and High Speed Manufacturing Technology
1581989Analysis of Cutting Forces Pulsation in Intermittent Cut OperationsYoung, Hong-Tsu The 5th National Conference on Mechanical Engineering
1591987ALLOWING FOR NOSE RADIUS EFFECTS IN PREDICTING THE CHIP FLOW DIRECTION AND CUTTING FORCES IN BAR TURNING.Young, H.T.; Mathew, P.; Oxley, P.L.B.; HONG-TSU YOUNG Proceedings of the Institution of Mechanical Engineers. Part C. Mechanical engineering science
1601987Allowing for nose radius effects in predicting the chip flow direction and cutting forces in bar turningYoung, H.T.; Mathew, P.; Oxley, P.L.B.; HONG-TSU YOUNG Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
1611987切削負載伺服補償之無偏擺化多刃精密切削研究楊宏智 
1621986Allowing for end cutting edge effects in predicting forces in bar turning with oblique machining conditionsHu, R.S.; Mathew, P.; Oxley, P.L.B.; Young, H.T.; HONG-TSU YOUNG Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
1631986ALLOWING FOR END CUTTING EDGE EFFECTS IN PREDICTING FORCES IN BAR TURNING WITH OBLIQUE MACHINING CONDITIONS.Hu, R.S.; Mathew, P.; Oxley, P.L.B.; Young, H.T.; HONG-TSU YOUNG Proceedings of the Institution of Mechanical Engineers. Part C. Mechanical engineering science