第 1 到 269 筆結果,共 269 筆。
公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 | |
---|---|---|---|---|---|---|---|
1 | 2023 | Human Posture Transition-Time Detection Based upon Inertial Measurement Unit and Long Short-Term Memory Neural Networks | Kuo, Chun Ting; Lin, Jun Ji; Jen, Kuo Kuang; WEI-LI HSU ; FU-CHENG WANG ; Tsao, Tsu Chin; JIA-YUSH YEN | Biomimetics | 2 | 0 | |
2 | 2023 | Machine Learning for Human Motion Intention Detection | Lin, Jun Ji; Hsu, Che Kang; WEI-LI HSU ; Tsao, Tsu Chin; FU-CHENG WANG ; JIA-YUSH YEN | Sensors | 0 | 0 | |
3 | 2022 | Precision positioning control of a long-stroke stage employing multiple switching control | FU-CHENG WANG ; Lu, J.-F.; WEI-JIUN SU ; JIA-YUSH YEN | Microsystem Technologies | 1 | 3 | |
4 | 2020 | Adaptation-Enhanced Model-Based Control with Charge Feedback for Piezo-Actuated Stage | Yeh, Y.-L.; Yen, J.-Y.; JIA-YUSH YEN | Asian Journal of Control | 2 | 2 | |
5 | 2020 | Featured Surface Matching Method for Liver Image Registration | Su, S.-T.; MING-CHIH HO ; Yen, J.-Y.; JIA-YUSH YEN ; YUNG-YAW CHEN | IEEE ACCESS | 3 | 3 | |
6 | 2020 | Discussion and improvement of a blade-type XBPM with coupling suppression by compensating calibration coefficients | Chuang, J.-Y.; Lin, Y.-Z.; Hsiao, Y.-M.; Liu, Y.-C.; Shu, D.; Kuan, C.-K.; Wu, H.; Sheng, I.-C.; Cheng, Y.-T.; Shueh, C.; Chang, C.-C.; Chan, C.-K.; Yen, J.-Y.; JIA-YUSH YEN | Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment | 2 | ||
7 | 2020 | Study on the transient response to the point-to-point motion controls on a dual-axes air-bearing planar stage | Kuo, F.-C.; Hsu, C.; Hsieh, M.-R.; Yen, J.-Y.; Chen, L.-C.; Chung, T.-T.; JIA-YUSH YEN ; FU-CHENG WANG ; LIANG-CHIA CHEN | International Journal of Advanced Manufacturing Technology | 3 | 2 | |
8 | 2019 | Preface | Yen, J.-Y.; JIA-YUSH YEN | Proceedings - 5th International Conference on Control Science and Systems Engineering, ICCSSE 2019 | |||
9 | 2019 | An eight degree-of-freedom robotic endoscope holder | Chiang S.-C.; Huang Y.-C.; Shen K.; Yen J.-Y.; JIA-YUSH YEN | 2018 International Automatic Control Conference | |||
10 | 2019 | Precise railway alignment measurements of the horizontal circular curves and the vertical parabolic curves using the chord method | Chiou S.-B.; Yen J.-Y.; JIA-YUSH YEN | Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit | 10 | ||
11 | 2019 | A Survey of Suspension Component Specifications and Vehicle Vibration Measurements in an Operational Railway System | Chiou S.-B.; Yen J.-Y.; JIA-YUSH YEN | Journal of Vibrational Engineering and Technologies | 2 | ||
12 | 2019 | Facile fabrication of superporous and biocompatible hydrogel scaffolds for artificial corneal periphery | Lee, Y.-P.; Liu, H.-Y.; Lin, P.-C.; Lee, Y.-H.; Yu, L.-R.; Hsieh, C.-C.; Shih, P.-J.; Shih, W.-P.; I-JONG WANG ; Yen, J.-Y.; JIA-YUSH YEN ; CHI-AN DAI ; CHIH-CHEN HSIEH ; PO-JEN SHIH | Colloids and Surfaces B: Biointerfaces | 23 | 18 | |
13 | 2019 | Micro-lens fabrication by a long-stroke precision stage with switching control based on model response prediction | Wang F.-C. ; Peng Y.-K.; Lu J.-F.; Chung T.-T.; JIA-YUSH YEN | Microsystem Technologies | 1 | 2 | |
14 | 2019 | Dynamic human object recognition by combining color and depth information with a clothing image histogram | Wang Y.-H.; Wang T.-W.; Yen J.-Y.; JIA-YUSH YEN | International Journal of Advanced Robotic Systems | 2 | 2 | |
15 | 2019 | Liver image registration by finite element model for deriving tumour and vessel locations | MING-CHIH HO ; Su, S.-T.; Hsu, W.-J.; Yen, J.-Y.; JIA-YUSH YEN ; YUNG-YAW CHEN | International Journal of Electrical Engineering | 0 | 0 | |
16 | 2018 | Comparison of the Control Designs of an Human Co-Working Endoscope Holder | Liao, You Ting; Chen, Chin Yuan; JIA-YUSH YEN ; MING-CHIH HO ; YUNG-YAW CHEN | 26th Mediterranean Conference on Control and Automation | 0 | 0 | |
17 | 2018 | Long range gaze estimation with multiple near-infrared emitters | Ma, Zheng Hong; Liu, Zhi Xiang; MING-CHIH HO ; JIA-YUSH YEN ; YUNG-YAW CHEN | 2017 International Automatic Control Conference, CACS 2017 | 1 | 0 | |
18 | 2018 | Computation of liver deformations with finite element model | Chien, Chih Chien; Chang, Yi Fan; MING-CHIH HO ; JIA-YUSH YEN ; YUNG-YAW CHEN | 2017 International Automatic Control Conference | 0 | 0 | |
19 | 2018 | Battery cell modeling and online estimation of the state of charge of a lithium-ion battery | Tsai I.-H.; Yu K.-H.; Tseng A.; Yen J.-Y.; Fu T.-T.; Huang E.; JIA-YUSH YEN | Journal of the Chinese Institute of Engineers, Series A/Chung-kuo Kung Ch'eng Hsuch K'an | 4 | ||
20 | 2018 | Modeling of railway turnout geometry in the frog area with the vehicle wheel trajectory | Chiou S.-B.; Yen J.-Y.; JIA-YUSH YEN | Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit | 3 | ||
21 | 2018 | Compensation for the residual error of the voltage drive of the charge control of a piezoelectric actuator | Liu S.-T.; Yen J.-Y.; JIA-YUSH YEN | Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME | 6 | 6 | |
22 | 2017 | Real-time, energy-efficient traction allocation strategy for the compound electric propulsion system | Li K.; Chou F.-C.; JIA-YUSH YEN ; Kang LI | IEEE/ASME Transactions on Mechatronics | 25 | 21 | |
23 | 2017 | Compensation of the residual error from the charge feedback control of a piezoelectric-actuated stage | Wen S.-F.; Yen J.-Y.; Liu S.-T.; Wang F.-C. ; Chen M.-S.; Chen Y.-Y.; Hung C.-W.; JIA-YUSH YEN ; FU-CHENG WANG | Proceedings of the Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering | 2 | 2 | |
24 | 2017 | Fabrication of large-scale micro-structures by two-photon polymerization with a long-stroke precision stage | Wang F.-C. ; Wang K.-A.; Chung T.-T.; JIA-YUSH YEN | Advances in Mechanical Engineering | 5 | 5 | |
25 | 2017 | Integrating wavelet transformation with Markov random field analysis for the depth estimation of light-field images | Lee W.-Y.; Li C.-Y.; Yen J.-Y.; JIA-YUSH YEN | IET Computer Vision | 6 | ||
26 | 2017 | An Adaptive Unknown Periodic Input Observer for Discrete-Time LTI SISO Systems | Lin S.-Y.; Yen J.-Y.; Chen M.-S.; Chang S.-H.; Kao C.-Y.; JIA-YUSH YEN | IEEE Transactions on Automatic Control | 7 | ||
27 | 2017 | High-performance and high-precision servo control of a single-deck dual-axis PMLSM stage | Huang W.-L.; Kuo F.-C.; Chou S.-C.; Yen J.-Y.; Tsai I.-H.; Chung T.-T.; Hung C.-W.; JIA-YUSH YEN | International Journal of Advanced Manufacturing Technology | 3 | ||
28 | 2017 | Biomechanical Simulation of Stress Concentration and Intraocular Pressure in Corneas Subjected to Myopic Refractive Surgical Procedures | Shih, P.-J.; I-JONG WANG ; Cai, W.-F.; JIA-YUSH YEN ; PO-JEN SHIH | Scientific Reports | 24 | 16 | |
29 | 2017 | Estimation of the Corneal Young's Modulus in Vivo Based on a Fluid-Filled Spherical-Shell Model with Scheimpflug Imaging | Shih, P.-J.; Huang, C.-J.; Huang, T.-H.; Lin, H.-C.; Yen, J.-Y.; I-JONG WANG ; Cao, H.-J.; Shih, W.-P.; JIA-YUSH YEN ; CHI-AN DAI ; PO-JEN SHIH | Journal of Ophthalmology | 24 | 18 | |
30 | 2016 | Improvement of harmonic dissector for minimal invasive surgery, modeling and the stiffness identification of the clipped object | Liu, Shih Tabg; Liao, Yo Ting; JIA-YUSH YEN ; YUNG-YAW CHEN ; FENG-LI LIAN | 2015 CACS International Automatic Control Conference | 0 | 0 | |
31 | 2016 | Impacts of sensor layouts on the performance of a long-stroke nano-positioning stage | Wang F.-C. ; Wang K.-A.; Chen Y.-Y.; Chen H.-J.; JIA-YUSH YEN | Advances in Mechanical Engineering | 3 | 4 | |
32 | 2016 | Computation of liver deformations for minimally invasive surgery | Hsu, W.-J.; MING-CHIH HO ; Lian, F.-L.; Yen, J.-Y.; Win-Li Lin ; FENG-LI LIAN ; JIA-YUSH YEN | CACS 2015 - 2015 CACS International Automatic Control Conference | 1 | 0 | |
33 | 2015 | A corneal elastic dynamic model derived from Scheimpflug imaging technology. | WEN-PIN SHIH ; JIA-YUSH YEN ; I-JONG WANG ; PO-JEN SHIH | Ophthalmic & Physiological Optics | 17 | 15 | |
34 | 2015 | Frequency domain effect of a hysteresis suppression system with inverse Preisach model based control | Tsai H.-F.; Yen J.-Y.; Chen L.-S.; Chang H.-C.; Chen J.J.H.; Wang F.-C.; JIA-YUSH YEN ; FU-CHENG WANG | International Journal of Automation and Smart Technology | 2 | 0 | |
35 | 2015 | A method of measuring corneal young’s modulus | Cao, H.-J.; Huang, C.-J.; Shih, P.-J.; I-JONG WANG ; JIA-YUSH YEN ; PO-JEN SHIH | IFMBE Proceedings | 3 | 0 | |
36 | 2015 | Robust State-and-Disturbance Observer Design for Linear Non-minimum-phase Systems | JIA-YUSH YEN | Asian Journal of Control | 7 | 5 | |
37 | 2015 | A smart-card E-paper display system based on RF power harvesting | Chang, H.-C.; Yen, J.-Y.; Huang, C.-H.; Chen, G.-L.; Hsu, C.-K.; JIA-YUSH YEN | IETE Journal of Research | 0 | ||
38 | 2015 | Design of an advanced retractable multi-speaker headphone | Chao Y.T.; Yu Y.L.; Yen J.Y.; Li K.; Lo Y.C.; Liao Y.T.; Lee L.C.; JIA-YUSH YEN | 3rd International Conference on Innovation, Communication and Engineering | |||
39 | 2015 | Multivariable fixed-order robust control for a PEMFC system | Wang, F.-C.; Chen, H.-T.; Chou, M.-C.; Yen, J.-Y.; JIA-YUSH YEN | 2009 European Control Conference | |||
40 | 2015 | Minimally invasive surgery instruments based on a four-bar linkage design | Kam, M.; Yen, J.-Y.; JIA-YUSH YEN | International Journal of Automation and Smart Technology | |||
41 | 2015 | A novel home-ventilation soundproof structure design based on nature-landscape model | Yu Y.L.; Chao Y.T.; Yen J.Y.; JIA-YUSH YEN | Innovation in Design, Communication and Engineering - Proceedings of the 3rd International Conference on Innovation, Communication and Engineering | |||
42 | 2015 | A Turbidity Test Based Centrifugal Microfluidics Diagnostic System for Simultaneous Detection of HBV, HCV, and CMV | Chang, Hung-Cheng; Chao, Yu-Tin; Yen, Jia-Yush ; Yu, Ya-Lin; Lee, Chun-Nan; Ho, Bing-Ching; Liu, Kou-Chen; Fang, Jiunn; Lin, Chii-Wann; Lee, Jiun-Haw; JIUN-HAW LEE ; CHII-WANN LIN | Advances in Materials Science and Engineering | |||
43 | 2015 | A Novel Soundproof Ventilation Plant Design with High Performance and No Energy Consumption | Yu, Y.-L.; Chao, Y.-T.; Lee, L.-C.; Yen, J.-Y.; Fan, Y.-C.; JIA-YUSH YEN | Mathematical Problems in Engineering | 1 | ||
44 | 2015 | IEET引領新世紀的工程及科技教育認證 | 顏家鈺 | 評鑑雙月刊 | |||
45 | 2014 | Temperature effects on the magnetic properties of silicon-steel sheets using standardized toroidal frame | JIA-YUSH YEN | Scientific World Journal | 5 | 0 | |
46 | 2014 | Robust loop-shaping control for a nano-positioning stage | Wang F.-C. ; Chen L.-S.; Tsai Y.-C.; Hsieh C.-H.; JIA-YUSH YEN | Journal of Vibration and Control | 18 | 15 | |
47 | 2014 | Dynamics stress analysis for a high rigidity bendable Minimal Invasive surgical (MIS) instrument design | Chao, Y.T.; Yu, Y.L.; Yen, J.Y.; Kam, M.; Hsu, C.J.; Liu, S.T.; Ho, M.C.; Chen, Y.Y.; Lian, F.L.; JIA-YUSH YEN | 2nd International Conference on Innovation, Communication and Engineering | |||
48 | 2014 | A novel application for enlarge focus area based on High Intensity Focused Ultrasound (HIFU) probe with a high directivity structure design | Yu, Y.L.; Chao, Y.T.; Yen, J.Y.; Hsu, C.J.; Kam, M.; Ho, M.C.; Chen, Y.Y.; Lian, F.L.; JIA-YUSH YEN | 2nd International Conference on Innovation, Communication and Engineering | |||
49 | 2014 | Sensor layouts for a long-stroke nano-positioning stage | Chen Y.Y.; Wu R.C.; Wang F.C. ; JIA-YUSH YEN | SICE Annual Conference | 3 | 0 | |
50 | 2014 | Output Feedback Sliding Mode Control-A Robust Observer Approach for SISO Systems | JIA-YUSH YEN | 中國機械工程學刊 | 0 | ||
51 | 2013 | Image based in situ electron-beam drift detection by silicon photodiodes in scanning-electron microscopy and an electron-beam lithography system | Y. H. Kuo; C. J. Wu; F. T. Kuo; YUNG-YAW CHEN ; JIA-YUSH YEN | Microelectronic Engineering | 2 | 2 | |
52 | 2013 | Robust control for a pneumatic muscle actuator system | JIA-YUSH YEN | Transactions of the Canadian Society for Mechanical Engineering | 9 | 7 | |
53 | 2013 | Solution-refined method for electrostatic potential distribution of large-scale electron optics | Lee, Y.-M.; Li, J.-H.; Sheu, T.-W.-H.; Tsai, K.-Y.; KUEN-YU TSAI ; JIA-YUSH YEN ; JIA-HAN LI ; TONY W. H. SHEU | Japanese Journal of Applied Physics | 0 | 0 | |
54 | 2013 | Design and control of a long-stroke nano-positioning stage | Wu, R.C.; Tsai, I.H.; Wang, F.C.; Yen, J.Y.; JIA-YUSH YEN | 2013 IEEE/SICE International Symposium on System Integration | |||
55 | 2013 | A robust variable sampling time BLDC motor control design based upon μ-synthesis | Hung, C.-W.; Yen, J.-Y.; JIA-YUSH YEN | The Scientific World Journal | |||
56 | 2013 | Precision robust control for a three dimensional PZT stage | JIA-YUSH YEN | SICE Annual Conference | 0 | ||
57 | 2013 | Precision tracking of a piezo-driven stage by charge feedback control | Chen, L.-S.; Chen, J.J.H.; Kuo, F.-C.; Chen, M.-S.; Chung, B.-I.; YUNG-YAW CHEN ; JIA-YUSH YEN | Precision Engineering | 23 | 17 | |
58 | 2013 | Construction of a high frequency and high reflectance shutter for a direct write EUV lithography system | Chuang, J.-Y.; Yen, J.-Y.; Juang, B.-Y.; Weng, W.-P.; Lin, M.-H.; JIA-YUSH YEN | International Journal of Automation and Smart Technology | |||
59 | 2013 | A novel design of high intensity focus ultrasound (HIFU) for enlarged focus area application | Chao, Y.-T.; Yu, Y.-L.; Yen, J.-Y.; Hsu, C.-J.; Kam, M.; Liu, S.T.; MING-CHIH HO ; Chen, Y.-Y.; FENG-LI LIAN ; JIA-YUSH YEN ; YUNG-YAW CHEN | Proceedings of the IASTED International Conference on Modelling and Simulation | 0 | 0 | |
60 | 2013 | Preliminary study of intracorporeal localization for endoscopy tracking | Ke, M.-C.; Tseng, Y.-H.; Chen, C.-W. ; MING-CHIH HO ; Lian, F.-L.; Yen, J.-Y.; Win-Li Lin ; Chen, Y.-Y.; FENG-LI LIAN ; YUNG-YAW CHEN ; JIA-YUSH YEN | 2013 CACS International Automatic Control Conference, CACS 2013 | 1 | 0 | |
61 | 2013 | System identification and robust control of a pneumatic muscle actuator system | Lin, L.-H.; Yen, J.-Y.; JIA-YUSH YEN ; Wang F.-C. | Applied Mechanics and Materials | 3 | 0 | |
62 | 2013 | Co-operating to Enhance Engineering Education in Asia | JIA-YUSH YEN ; Mandy Liu | Achieving Curriculum Change in Engineering Education | |||
63 | 2012 | Development of a system for mapping of thrust ripple induced by PMLSM drives in a single-deck, dual-axis precision stage | Kuo, F.-T.; Western, C.; Yen, J.-Y.; JIA-YUSH YEN | International Conference on Optimisation of Electrical and Electronic Equipment | |||
64 | 2012 | Ultrasound image-guided algorithms for tracking liver motion | Lin, C.-K.; Lin, F.-C.; Lian, F.-L.; Chang, K.-H.; MING-CHIH HO ; Yen, J.-Y.; Chen, Y.-Y.; FENG-LI LIAN ; YUNG-YAW CHEN ; JIA-YUSH YEN | IEEE/ASME International Conference on Advanced Intelligent Mechatronics | 3 | 0 | |
65 | 2012 | Effectiveness of external respiratory surrogates for in vivo liver motion estimation | Chang K.-H.; MING-CHIH HO ; CHI-CHUAN YEH ; Chen Y.-C.; Lian F.-L.; Win-Li Lin ; Yen J.-Y.; FENG-LI LIAN ; YUNG-YAW CHEN ; JIA-YUSH YEN | Medical Physics | 7 | 4 | |
66 | 2011 | Prediction of iron losses using the modified Steinmetz equation under the sinusoidal waveform | JIA-YUSH YEN | 8th Asian Control Conference | 24 | ||
67 | 2011 | Structural design and analysis of a nano-positioning planar motion stage | JIA-YUSH YEN | World Congress on Intelligent Control and Automation | 5 | 0 | |
68 | 2011 | MIMO variable structure control of a precision stage using PMLSM drives | Yen, J.-Y.; Kuo, F.-T.; Lee, M.-C.; Chang, M.-H.; JIA-YUSH YEN | IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM | |||
69 | 2011 | Longitudinal stitching of sub-micron periodic fringes on a roller | Chen, L.-S.; Yen, J.-Y.; Chen, Y.-P.; Wang, L.A.; Chung, T.-T.; Lin, H.-I.; Chen, P.-H.; Chang, S.-H.; JIA-YUSH YEN ; LON A. WANG ; TIEN-TUNG CHUNG | Microelectronic Engineering | 2 | ||
70 | 2011 | High performance FOV switching mechanism design for an infrared zoom lens | Huang, C.-J.; Tsai, C.-S.; Chen, B.-R.; Yen, J.-Y.; Lee, J.-F.; Lin, L.-H.; Chen, M.-S.; JIA-YUSH YEN | International Journal of Automation and Smart Technology | |||
71 | 2011 | Line stitching in servo-assisted electron beam lithography system | Yen, J.-Y.; Chen, L.-S.; Chiu, P.; JIA-YUSH YEN | IEEE/ASME International Conference on Advanced Intelligent Mechatronics, AIM | |||
72 | 2011 | Silicon photodiodes for electron beam position and drift detection in scanning electron microscopy and electron beam lithography system | Kuo, Y.-H.; Wu, C.-J.; Yen, J.-Y.; Chen, S.-Y.; Tsai, K.-Y.; KUEN-YU TSAI ; YUNG-YAW CHEN ; JIA-YUSH YEN | Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment | 5 | 4 | |
73 | 2011 | Ultrasound image-guided tracking algorithm for moving-tumor treatment | Chang, K.-H.; MING-CHIH HO ; CHI-CHUAN YEH ; Lian, F.-L.; Yen, J.-Y.; Chen, Y.-Y.; FENG-LI LIAN ; YUNG-YAW CHEN ; CHI-CHUAN YEH; JIA-YUSH YEN | AIP Conferenc | 0 | 0 | |
74 | 2011 | Bionic soft crystalline lens materials for MEMs applications based on self-assembling amphiphilic block copolymer/nanoparticle hybrids | Chang, C.-J.; Yang, Y.-L.; Lee, Y.-P.; Chiang, C.-J.; CHI-AN DAI ; Chen, J.-C.; Cheng, Y.-Y.; Chen, C.-C.; Liu, M.-W.; Shih, Wen-Pin ; JIA-YUSH YEN | Microelectronic Engineering | 3 | 2 | |
75 | 2011 | Planar motion stage control using PDFF controller | JIA-YUSH YEN | World Congress on Intelligent Control and Automation | 2 | 0 | |
76 | 2011 | Amorphization behavior of Ni57Zr20Ti 22Ge1 powders by mechanical alloying | Kuo K.-C.; Lee P.-Y.; JIA-YUSH YEN | Key Engineering Materials | 0 | 0 | |
77 | 2011 | Focal point tracking system for concentration solar power collection | JIA-YUSH YEN ; Yeh, Pei-Ying; Yen, Po-Ching; Yen, Jia-Yush ; Wu, Tsung-Tsong ; Liu, Pei-Ling ; Wu, Chia-Ling ; Peng, Ching-Yu | Renewable and Sustainable Energy Reviews | 10 | 9 | |
78 | 2011 | In situ beam drift detection using a two-dimensional electron-beam position monitoring system for multiple-electron-beam-direct-write lithography | CHIEH-HSIUNG KUAN ; Tsai, Kuen-Yu ; YUNG-YAW CHEN ; JIA-YUSH YEN | Journal of Vacuum Science and Technology B:Nanotechnology and Microelectronics | 4 | ||
79 | 2010 | Tracking control of shape-memory-alloy actuators based on self-sensing feedback and inverse hysteresis compensation | JIA-YUSH YEN ; Liu, Shu-Hung; Huang, Tse-Shih; Yen, Jia-Yush | Sensors | 67 | 60 | |
80 | 2010 | Development of a nano-positioning planar motion stage | Chung, T.-T.; Chu, C.-H.; Fan, K.-C.; Yen, J.-Y.; Szu, K.-I.; JIA-YUSH YEN | 2010 2nd International Conference on Mechanical and Electronics Engineering | |||
81 | 2010 | Comparison of sensor fusion methods for an SMA-based hexapod biomimetic robot | Liu, S.-H.; Huang, T.-S.; Yen, J.-Y.; JIA-YUSH YEN | Robotics and Autonomous Systems | |||
82 | 2010 | Architecture for next generation massively parallel maskless lithography system (MPML2) | Su, M.-S.; Tsai, K.-Y.; Lu, Y.-C.; Kuo, Y.-H.; Pei, T.-H.; Yen, J.-Y.; YI-CHANG LU ; KUEN-YU TSAI ; JIA-YUSH YEN | Proceedings of SPIE - The International Society for Optical Engineering | |||
83 | 2010 | Novel approach to fuzzy-wavelet ECG signal analysis for a mobile device | Tseng, C.-E.; Peng, C.-Y.; Chang, M.-W.; Yen, J.-Y.; Lee, C.-K.; Huang, T.-S.; JIA-YUSH YEN ; CHIH-KUNG LEE | Journal of Medical Systems | 6 | ||
84 | 2010 | Robust control design for vibration isolation of an electron beam projection lithography system | Wang, F.-C.; Hong, M.-F.; Yen, J.-Y.; Wang, Fu-Cheng; Hong, Min-Feng; Yen, Jia-Yush; FU-CHENG WANG ; JIA-YUSH YEN | Japanese Journal of Applied Physics | 6 | ||
85 | 2010 | Modified frequency-partitioned spectrum estimation for a wireless health advanced monitoring bio-diagnosis system | Tseng, C.-E.; Yen, J.-Y.; Chang, M.-W.; Chang, W.-C.; JIA-YUSH YEN ; Yen, Jia-Yush ; Lee, Chih-Kung ; CHIH-KUNG LEE | IEEE Transactions on Systems, Man, and Cybernetics Part A:Systems and Humans | 3 | 3 | |
86 | 2010 | 東南亞工程教育認證 | 顏家鈺 ; 劉曼君 | 評鑑雙月刊 | |||
87 | 2009 | Stitching periodic submicron fringes by utilizing step-and-align interference lithography | Chen, Y.-P.; Chen, C.-H.; Chang, J.-H.; Chiu, H.-C.; Chen, G.-Y.; Chiang, C.-H.; Chen, L.-S.; Tseng, C.-T.; Lee, C.-H.; Yen, J.-Y.; LON A. WANG ; JIA-YUSH YEN | Journal of Vacuum Science and Technology B: Microelectronics and Nanometer Structures | 8 | 8 | |
88 | 2009 | Using MPCA of spectra model for fault detection in a hot strip mill | JIA-YUSH YEN | Journal of Materials Processing Technology | 10 | 9 | |
89 | 2009 | Research on three dimensional machining effects using atomic force microscope | Mao, Y.-T.; Kuo, K.-C.; Tseng, C.-E.; Huang, J.-Y.; Lai, Y.-C.; Yen, J.-Y.; Lee, C.-K.; Chuang, W.-L.; JIA-YUSH YEN ; CHIH-KUNG LEE | Review of Scientific Instruments | |||
90 | 2009 | The application of disturbance response decoupling to the vibration control of an electron beam lithography system | Wang, Fu-Cheng; Tsao, Yu-Chia; Yen, Jia-Yush; FU-CHENG WANG ; JIA-YUSH YEN | Japanese Journal of Applied Physics | |||
91 | 2009 | Vibration isolation of a full electron beam projection lithography system | Wang, Fu-Cheng ; Hong, Min-Feng; Yen, Jia-Yush | 22nd International Microprocesses and Nanotechnology Conference | |||
92 | 2009 | Robust PID Controller Design Using Particle Swarm Optimization | Lin, Liu-Hsu; Wang, Fu-Cheng ; Yen, Jia-Yush | 7th Asian Control Conference | 14 | ||
93 | 2009 | Multivariable Fixed-Order Robust Control for a PEMFC System | Wang, Fu-Cheng ; Chen, Hsuan-Tsung; Chou, Ming-Cheng; Yen, Jia-Yush | European Control Conference | 0 | ||
94 | 2009 | Preliminary design of a two-dimensional electron beam position monitor system for multiple-electron-beam-direct-write lithography | CHIEH-HSIUNG KUAN ; YUNG-YAW CHEN ; KUEN-YU TSAI ; JIA-YUSH YEN ; Chen, S.-Y.; Tsai, K.-Y.; Ng, H.-T.; Fan, C.-H.; Pei, T.-H.; Kuan, C.-H.; Chen, Y.-Y.; Yen, J.-Y.; CHIEH-HSIUNG KUAN ; YUNG-YAW CHEN | Proceedings of SPIE - The International Society for Optical Engineering | |||
95 | 2009 | Hybrid servo design for large area nano pattern stitching | Yen, J.-Y.; Chen, C.-H.; Chen, L.-S.; Tsai, K.-Y.; Chang, S.-H.; KUEN-YU TSAI ; JIA-YUSH YEN | IEEE/ASME International Conference on Advanced Intelligent Mechatronics | |||
96 | 2008 | Application of the continuous no-reset switching iterative learning control on a novel optical scanning system | Yen, Jia-Yush ; Yeh, Yea-Chin; Peng, Yung-Hao; Lee, Jyh-Fa | Mechatronics | 18 | 15 | |
97 | 2008 | 多電子束平行掃瞄微影系統設計-子計畫四:電子束微影多自由度托架設計 (新制多年期第2年) | 顏家鈺 | ||||
98 | 2008 | 機電能源領域2006日、韓先進機器人技術參訪計畫 | 顏家鈺 | ||||
99 | 2008 | 蛇形仿生運動機制於前瞻載具驅動系統之研究-子計畫一:蛇行運動體之動態分析與人工肌肉致動器研發 (新制多年期第2年) | 顏家鈺 | ||||
100 | 2008 | 蛇形仿生運動機制於前瞻載具驅動系統之研究-子計畫一:蛇行運動體之動態分析與人工肌肉致動器研發 (新制多年期第1年) | 顏家鈺 | ||||
101 | 2008 | 多電子束平行掃瞄微影系統設計-總計畫:多電子束平行掃瞄微影系統設計 (新制多年期第2年) | 顏家鈺 | ||||
102 | 2008 | Multivariable Robust Control of a Proton Exchange Membrane Fuel Cell System | Fu-Cheng Wang ; Hsuan-Tsung Chen; Yee-Pien Yang ; Jia-Yush Yen | Journal of Power Sources | 68 | 56 | |
103 | 2008 | Parameter identification when designing a solid-modeling-based grinding-machine controller | JIA-YUSH YEN ; Liu, Shu-Hung; Lai, Yi-Chih; Yen, Jia-Yush | International Journal of Machine Tools and Manufacture | 1 | 1 | |
104 | 2008 | Sensor fusion in a six-legged bio-mimicking robot | JIA-YUSH YEN | IFAC Proceedings Volumes (IFAC-PapersOnline) | 0 | 0 | |
105 | 2008 | Quality assurance of engineering education through accreditation of programs in Taiwan | Liu M.; Chang P.-F.; Wo A.M.; Yen J.-Y.; Yang Y.-B.; Wei C.-H.; JIA-YUSH YEN | International Journal of Engineering Education | |||
106 | 2008 | Dynamic modeling and robust controller design for air motor | Lin, L.H.; Yen, J.Y.; JIA-YUSH YEN | 27th Chinese Control Conference | |||
107 | 2008 | Parameter identification for a solid modeling based grinding machine controller design | Liu, Shu-Hung; Lai, Yi-Chih; Yen, Jia-Yush | International Journal of Machine Tools and Manufacture | |||
108 | 2008 | Vibration control of an electron beam projection lithography system employing disturbance response decoupling techniques | Wang, Fu-Cheng ; Tsao, Yo-Chia; Yen, Jia-Yush | 21st International Microprocesses and Nanotechnology Conference | |||
109 | 2008 | A bio-mimetic snake-like robot: Sensor based gait control | Chen, T.L.T.; Liu, S.-H.; Yen, J.-Y.; JIA-YUSH YEN | IEEE Workshop on Advanced Robotics and its Social Impacts | |||
110 | 2008 | Sensor fusion in a SMA-based hgxapod bio-mimetic robot | JIA-YUSH YEN | IEEE Workshop on Advanced Robotics and its Social Impacts | 7 | 0 | |
111 | 2008 | Downcoiler surface fault prediction for a hot strip steel mill | Chuang, W.-L.; Chen, C.-H.; Yen, J.-Y.; Hsu, Y.-L.; JIA-YUSH YEN | Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering | 1 | ||
112 | 2008 | Multivariable LQG Control of a Proton Exchange Membrane Fuel Cell System | Wang, Fu-Cheng ; Chen, Hsuan-Tsung; Yen, Jia-Yush | IFAC Proceedings Volumes | 0 | 0 | |
113 | 2008 | Quality Assurance of Engineering Education through Accreditation of Programs in Taiwan | Liu, Mandy; Chang, Pei-Fen; Wo, Andrew M.; Yen, Jia-Yush ; Yang, Yeong-Bin; Wei, Che-Ho | International Journal of Engineering Education | |||
114 | 2008 | Stitching technology using hybrid actuators in nano imprint | JIA-YUSH YEN | ASME Design Engineering Technical Conference | 2 | 0 | |
115 | 2008 | Welcome message | JIA-YUSH YEN | IEEE Workshop on Advanced Robotics and its Social Impacts | 0 | 0 | |
116 | 2008 | Quality Assurance for Engineering Education in a Flat World: Emerging Educational Quality Assurance Approaches in Taiwan | Liu, Mandy; Chang, Pei-Fen; Wo, Andrew M.; Yang, Yeong-Bin; Yen, Jia-Yush ; Wei, Che-Ho | International Journal of Engineering Education | |||
117 | 2008 | 工程設計教育與認證 | 顏家鈺 ; 劉曼君 | 評鑑雙月刊 | |||
118 | 2007 | Multivariable System Identification and Robust Control of a Proton Exchange Membrane Fuel Cell System | Fu-Cheng Wang ; Hsuan-Tsung Chen; Yee-Pien Yang ; Hsin-Ping Chang; Jia-Yush Yen | 46th IEEE Conference on Decision and Control | 8 | 0 | |
119 | 2007 | 多電子束平行掃瞄微影系統設計-總計畫:多電子束平行掃瞄微影系統設計 (新制多年期第1年) | 顏家鈺 | ||||
120 | 2007 | 多電子束平行掃瞄微影系統設計-子計畫四:電子束微影多自由度托架設計 (新制多年期第1年) | 顏家鈺 | ||||
121 | 2007 | Design and servo control of a single-deck planar maglev stage | Lai, Y.-C.; Lee, Y.-L.; Yen, J.-Y.; Y.-L.; Yen; JIA-YUSH YEN | IEEE Transactions on Magnetics | 25 | 27 | |
122 | 2007 | A sub-band spectral analysis for electrocardiography | Tseng, C.-E.; Yen Jr.; J.-Y.; Chang, W.-C.; JIA-YUSH YEN | IEEE International Conference on Systems, Man and Cybernetics | |||
123 | 2007 | Fault detection in hot strip mill using multi-way principal component analysis and autoregressive model spectrum estimation | Chuang, W.-L.; Hsu, Y.-L.; Yen, J.-Y.; Chen, C.-H.; JIA-YUSH YEN | 3rd Indian International Conference on Artificial Intelligence | |||
124 | 2007 | A single deck 2D magnet levitation platform | Yen, J.-Y.; Lee, Y.-L.; Lai, Y.-C.; JIA-YUSH YEN | IEEE/ASME International Conference on Advanced Intelligent Mechatronics | |||
125 | 2007 | Vibration Control of EPL System byDisturbance Response Decoupling | Wang, Fu-Cheng ; Tsao, Yu-Chia; Yen, Jia-Yush | 2007 CACS International Automatic Control Conference | |||
126 | 2007 | A variable-sampling controller for brushless DC motor drives with low-resolution position sensors | CHIH-WEN LIU ; JIA-YUSH YEN ; Hung, C.-W.; Lin, C.-T.; Liu, C.-W.; Yen, J.-Y.; CHIH-WEN LIU ; JIA-YUSH YEN | IEEE Transactions on Industrial Electronics | |||
127 | 2006 | Solid modeling based servo system design for a high speed micro grinding machine | Lee, Ruey-Jeng; JIA-YUSH YEN ; Chou, Kuan-Chien; Liu, Shu-Hung; Yen, Jia-Yush | International Journal of Machine Tools and Manufacture | 3 | 3 | |
128 | 2006 | Design of a novel 6-DOF planar maglev system | Lai, Y.-C.; Yen, J.-Y.; JIA-YUSH YEN | Journal of Magnetism and Magnetic Materials | 2 | ||
129 | 2006 | Application of the no-rest switching iterative learning control on a novel optical scanning system | Yeh, Y.-C.; Yen, J.-Y.; Lee, J.-F.; JIA-YUSH YEN | Journal of the Chinese Society of Mechanical Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao | |||
130 | 2006 | Design and implementation of a novel triangular planar Maglev system | Lai, Y.; Lee, Y.; Yen, J.; JIA-YUSH YEN | IEEE International Magnetics Conference | |||
131 | 2006 | A hexapod robot based on shape memory alloy actuators | Liu, S.-H.; Yen, J.-Y.; JIA-YUSH YEN | IFAC Proceedings Volumes | |||
132 | 2006 | 高速大角度光學掃描機構 | 顏家鈺 ; 葉雅琴; 郭志暐; 李志法 | ||||
133 | 2005 | Design for control of a flexure jointed optical servo scanning platform | Yeh, Yea-Chin; Yen, Jia-Yush ; Peng, Yung-Hao; JIA-YUSH YEN | IEEE International Conference on Mechatronics | 0 | 0 | |
134 | 2005 | 光機電系統整合概論 | 顏家鈺 | ||||
135 | 2005 | Servo synthesis for an optical pick-up head with tilt compensation | JIA-YUSH YEN | IFAC Proceedings Volumes (IFAC-PapersOnline) | 0 | ||
136 | 2005 | AFM probe controller design based on μ-synthesis | Lan, K.-J.; Yen, J.-Y.; Lee, C.-K.; Lin, Y.-M.; Chen, C.-H.; JIA-YUSH YEN | Asian Journal of Control | |||
137 | 2005 | A novel high speed optical scanning platform | Yeh, Y.-C.; Yen, J.-Y.; Lee, J.-F.; Peng, Y.-H.; JIA-YUSH YEN | Proceedings of SPIE - The International Society for Optical Engineering | |||
138 | 2005 | Active vibration isolation of a large stroke scanning probe microscope by using discrete sliding mode control | Yen, J.-Y.; Lan, K.-J.; Kramar, J.A.; JIA-YUSH YEN | Sensors and Actuators, A: Physical | |||
139 | 2005 | A general purpose development kit for optical storage system design | Chen, C.-H.; Yen, J.-Y.; Huang, C.-Y.; Lo, F.-H.; JIA-YUSH YEN | Proceedings of SPIE - The International Society for Optical Engineering | |||
140 | 2005 | A new optical disk driver fine seek algorithm based on runout learning | Chen, C.-H.; Yen, J.-Y.; JIA-YUSH YEN | Proceedings of SPIE - The International Society for Optical Engineering | |||
141 | 2005 | Effect of force control algorithms on the scanning probe microscope lithography system | Yen, J.-Y.; Lin, I.-M.; Lee, C.-K.; JIA-YUSH YEN ; CHIH-KUNG LEE | Review of Scientific Instruments | |||
142 | 2005 | Design and implementation of a novel 6-DOF planar maglev positioning system | Lai, Y.C.; Yen, J.Y.; JIA-YUSH YEN | INTERMAG ASIA 2005 IEEE International Magnetics Conference | |||
143 | 2005 | High performance motion control of the novel optical servo scanning platform | Yeh, Y.-C.; Yen, J.-Y.; Peng, Y.-H.; Lee, J.-F.; JIA-YUSH YEN | Proceedings of SPIE - The International Society for Optical Engineering | |||
144 | 2005 | Radial fine seek control with fault protection in a digital versatile disc player | JIA-YUSH YEN ; Huang, Jao-Ming; Yen, Jia-Yush | Mechatronics | 3 | 2 | |
145 | 2005 | An AFM Probe Controller Design Based on μ-synthesis | Lan, Kuo-Jung; Yen, Jia-Yush ; Lee, Chih-Kung ; Lin, Yi-Ming; Chen, Cheng-Hung | Asian Journal of Control | 2 | ||
146 | 2005 | Robust control in the three-dimensional optical pickup head for optical disk drive | JIA-YUSH YEN | Proceedings of SPIE - The International Society for Optical Engineering | 0 | 0 | |
147 | 2004 | Development of an Intelligent Energy Management Network for Building Automation | Huang, Hsiao-Yi; JIA-YUSH YEN ; SIH-LI CHEN ; Ou, Feng-Chu | IEEE Transactions on Automation Science and Engineering | 35 | 32 | |
148 | 2004 | A Mechatronics Approach to the Servo Design for A Meglev System | Yen, Jia-Yush ; Lin, Jia-Hua | Bulletin of the College of Engineering | 1 | ||
149 | 2004 | 奈米工程概論 | 范光照; 黃漢邦 ; 陳炳煇 ; 張所鋐; 顏家鈺 | ||||
150 | 2004 | Active Vibration Isolation For A Long Range Scanning Tunneling Microscope | Lan, Kuo-Jung; Yen, Jia-Yush ; Kramar, John A. | Asian Journal of Control | 8 | 8 | |
151 | 2004 | Sliding mode control for active vibration isolation of a long range scanning tunneling microscope | JIA-YUSH YEN ; Lan, Kuo-Jung; Yen, Jia-Yush ; Kramar, John A. | Review of Scientific Instruments | 19 | 14 | |
152 | 2004 | In-vivo wireless bio-diagnosis system for long-term bioactivity monitoring network | Chen, C.-K.; Wu, W.-J.; Yu, S.-A.; Huang, J.-G.; Lin, Y.-H.; Chen, Y.-F.; Jin, M.-H.; Wen, C.-M.; Kao, C.-Y.; SHI-MING LIN ; Lu, S.-S.; Lin C.-W. ; Yen, J.-Y.; Jaw, F.-S.; Chen, C.-A.; Liao, F.-J.; Chiu, N.-F.; Chien, C.-N.; SHEY-SHI LU ; CHII-WANN LIN ; JIA-YUSH YENet al. ; WEN-JONG WU ; FU-SHAN JAW ; CHIH-KUNG LEE | Proceedings of SPIE - The International Society for Optical Engineering | 0 | 0 | |
153 | 2004 | Erratum: Development of an intelligent energy management network for building automation (IEEE Transactions on Automation Science and Engineering (2004)) | Huang H.-Y.; Yen J.-Y.; Chen S.-L.; JIA-YUSH YEN | IEEE Transactions on Automation Science and Engineering | 0 | 0 | |
154 | 2004 | A solid modeling based mechatronics approach to machine tool servo design | Yen, J.-Y.; Lee, R.-J.; JIA-YUSH YEN | IEEE International Conference on Control Applications | |||
155 | 2004 | 探針掃描式顯微鏡中探針控制法則之探討(1/3) | 顏家鈺 | ||||
156 | 2004 | Performance robustness and stiffness analysis on a machine tool servo design | Yen, Jia-Yush ; JIA-YUSH YEN ; Chang, Hui-Man | International Journal of Machine Tools and Manufacture | 15 | 14 | |
157 | 2004 | 即時定量複式PCR系統開發(先期研究)─子計畫四:即時定量複式PCR系統控制介面暨使用者介面嵌入式系統開發 | 顏家鈺 | ||||
158 | 2004 | 微型彷生生物體之研發─子計劃一:微型彷生機器之動態分析、伺服設計與製作(1/3) | 顏家鈺 | ||||
159 | 2004 | 空域掃描器之系統分析與伺服器設計及製作 | 顏家鈺 | ||||
160 | 2003 | 奈米工程概論 | 范光照; 黃漢邦 ; 張所鋐; 陳炳煇 ; 顏家鈺 | ||||
161 | 2003 | A Novel Fine Track-Seeking Scheme for Optical Storage Device | Huang, Jao-Ming; Yen, Jia-Yush | IEEE Transactions on Consumer Electronics | 2 | 2 | |
162 | 2003 | 智慧型高速真圓度測定儀之設計與發展─總計畫:智慧型高速真圓度測定儀之設計與發展(3/3) | 顏家鈺 | ||||
163 | 2003 | A research in the application of permanent magnets and solenoids to the planar maglev system design | Lai, Y.C.; Yen, J.Y.; JIA-YUSH YEN | Digests of the Intermag Conference | |||
164 | 2003 | A novel track jump controller with hybrid track position detector for the optical disk drives | Huang, J.-M.; Yen, J.-Y.; JIA-YUSH YEN | IEEE International Symposium on Consumer Electronics | |||
165 | 2003 | 建築物智慧型空調能源管理網路 | 顏家鈺 | ||||
166 | 2003 | 以機電整合為出發點之智慧型嵌入式複合系統控制-新型平面磁浮系統設計控制應用─子計畫一:智慧型嵌入式複合系統控制架構之研發(3/3) | 顏家鈺 | ||||
167 | 2003 | 智慧型高速真圓度測定儀之設計與發展─子計畫三:智慧型探頭設計(3/3) | 顏家鈺 | ||||
168 | 2002 | 控制學門英國參訪及參加IEEE 2002 CCA國際會議 | 顏家鈺 | ||||
169 | 2002 | 以機電整合為出發點之智慧型嵌入式複合系統控制-新型平面磁浮系統設計控制應用(2/3)─計畫一:智慧型嵌入複 | 顏家鈺 | ||||
170 | 2002 | 智慧型高速真圓度測定儀之設計與發展(2/3)─總計畫 | 顏家鈺 | ||||
171 | 2002 | Variable sampling rate controller design for brushless DC motor | Yen, Jia-Yush ; Chen, Yang-Lin; Tomizuka, Masayoshi | IEEE Conference on Decision and Control | 21 | 0 | |
172 | 2002 | A genetic algorithm-based parameter-tuning algorithm for multi-dimensional motion control of a computer numerical control machine tool | Kuo, L.-Y.; Yen, J.-Y.; JIA-YUSH YEN | Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture | |||
173 | 2002 | An observer for runout observation during track seeking for the two-actuator optical disk drive | Yen, J.-Y.; Wu, G.-H.; JIA-YUSH YEN | IFAC Proceedings Volumes | |||
174 | 2002 | Effect of mechanical stress on characteristics of silicon thermal oxides | Huang, C. H.; JENN-GWO HWU ; JIA-YUSH YEN | Japanese Journal of Applied Physics | 10 | 10 | |
175 | 2002 | Frequency-domain identification algorithms for servo systems with friction | Chen, Yung-Yaw ; Huang, Pai-yi; Yen, Jia-Yush | IEEE Transactions on Control Systems Technology | 67 | 41 | |
176 | 2002 | 智慧型高速真圓度測定儀之設計與發展(2/3)─子計畫三:智慧型探頭設計 | 顏家鈺 | ||||
177 | 2001 | 99 期中報告投影片 高速工具機驅動系統與機械結構剛性整合設計 | 顏家鈺 ; 張伯維; 李瑞政 | ||||
178 | 2001 | A mechatronics approach to the servo design for a maglev system | Yen, Jia-Yush ; Lin, Jia-Hua | American Control Conference | 0 | 0 | |
179 | 2001 | Servo parameter tuning for a 5-axis machine center based upon GA rules | JIA-YUSH YEN ; Kuo, Lun-Yu; Yen, Jia-Yush | International Journal of Machine Tools and Manufacture | 22 | 17 | |
180 | 2001 | Stress effect on the kinetics of silicon thermal oxidation | Yen, J. Y.; JENN-GWO HWU ; JIA-YUSH YEN | Journal of Applied Physics | 35 | 32 | |
181 | 2001 | 以機電整合為出發點之智慧型嵌入式複合系統控制-新型平面磁浮系統設計控制應用(1/3)─計畫一:智慧型嵌入複 | 顏家鈺 | ||||
182 | 2001 | A mechatronics approach to the servo design for a meglev system | Yen, J.-Y.; Lin, J.-H.; JIA-YUSH YEN | American Control Conference | |||
183 | 2001 | 智慧型高速真圓度測定儀之設計與發展(1/3)─子計畫三:智慧型探頭設計 | 顏家鈺 | ||||
184 | 2001 | 智慧型高速真圓度測定儀之設計與發展(1/3)─總計畫 | 顏家鈺 | ||||
185 | 2000 | 高精密機械定位平台之研製 | 范光照; 張所鈜; 顏家鈺 ; 鍾添東 | 第一屆海峽兩岸製造技術研討會論文集 | |||
186 | 2000 | Design optimization for an LPG automobile engine | Wu, Tzann-Dwo; Chen, Yih-Nan; Yen, Jia-Yush ; Jaw, Shenq-Yuh | International Journal of | |||
187 | 2000 | An investigation of power deposition patterns for scanned ultrasound arrays | Win-Li Lin ; Chen Y.-Y.; Ju K.-C.; JIA-YUSH YEN ; MING-JIUM SHIEH | Biomedical Engineering - Applications, Basis and Communications | 0 | ||
188 | 2000 | 智慧型家庭用電管理與節能網路系統─子計畫三: 智慧型家庭用電管理網路原型之整合與安裝 | 顏家鈺 | ||||
189 | 2000 | Enhancement of silicon oxidation rate due to tensile mechanical stress | JENN-GWO HWU ; JIA-YUSH YEN | Applied Physics Letters | 38 | 35 | |
190 | 1999 | Adaptive nonlinear control of repulsive Maglev suspension systems | Huang, Chao-Ming; Chen, Min-Shin; Yen, Jia-Yush | 1999 IEEE International Conference on Control Applications | 48 | 39 | |
191 | 1999 | Servo design for a high stiffness linear repulsive magnetic-levitation bearing | Huang, Chao-Ming; Yen, Jia-Yush | American Control Conference | 2 | 0 | |
192 | 1999 | Optimal configuration of multiple-focused ultrasound transducers for external hyperthermia | WIN-LI LIN ; YUNG-YAW CHEN ; Lin, Shu-Yuh; JIA-YUSH YEN ; MING-JIUM SHIEH ; Kuo, Te-Son | Medical Physics | 9 | 7 | |
193 | 1999 | Application of the least squares algorithm to the observer design for linear time-varying systems | Chen, M.-S.; Yen, J.-Y.; JIA-YUSH YEN | IEEE Transactions on Automatic Control | |||
194 | 1999 | A new compensator for servo systems with position dependent friction | Yen, J.-Y.; Huang, S.-J.; Lu, S.-S.; JIA-YUSH YEN | Journal of Dynamic Systems, Measurement and Control | 3 | ||
195 | 1999 | Fuzzy sliding mode controlled slider-crank mechanism using a PM synchronous servo motor drive | Fung, Rong-Fong; Chen, Ken-Wang; Yen, Jia-Yush; Fung, R.-F.; Chen, K.-W.; Yen, J.-Y.; JIA-YUSH YEN | International Journal of Mechanical Sciences | |||
196 | 1999 | Dual mode control of a system with friction | Huang, S.-J.; Yen, J.-Y.; Lu, S.-S.; JIA-YUSH YEN | IEEE Transactions on Control Systems Technology | |||
197 | 1999 | Servo design for a high precision magnetic levitation linear bearing based on approximate input-output feedback linearization | Huang, Chao-Ming; Yen, Jia-Yush | Journal of Control System and Technology | |||
198 | 1999 | Self-tuning fuzzy logic control for ultrasound hyperthermia with reference temperature based on objective functions | Chen Y.-Y.; Lin, Win-Li ; Liou H.-L.; Yen J.-Y.; JIA-YUSH YEN ; YUNG-YAW CHEN ; Win-Li Lin ; MING-JIUM SHIEH | Medical Physics | 9 | 8 | |
199 | 1999 | Servo system design of a high-resolution piezo-driven fine stage for step-and-repeat microlithography systems | Tsai Kuen-Yu; Yen Jia-Yush; JIA-YUSH YEN | IECON (Industrial Electronics Conference) | |||
200 | 1999 | Fuzzy sliding mode controlled slider crank mechanism using a PM synchronous servo motor drive | Fung, R. F.; Chen, K. W.; Yen, J. Y.; JIA-YUSH YEN | International Journal of Mechanical Sciences | |||
201 | 1999 | System modeling and feedback linearization control of a precision repulsive maglev stage | JIA-YUSH YEN | Journal of the Chinese Society of Mechanical Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao | 0 | ||
202 | 1999 | 雙軸超高精度磁浮定位機構之驅動, 量測與設計─子計劃一:磁浮平台本體及驅動機構設計(III) | 顏家鈺 | ||||
203 | 1998 | A decoupled path-following control algorithm based upon the decomposed trajectory error | Ho, Hsin-Chiang; JIA-YUSH YEN ; Lu, Shui-Shong | 37th IEEE Conference on Decision and Control | 39 | 34 | |
204 | 1998 | Estimation of ultrasound transducer and tissue parameters with artificial neural network | Chen Y.-Y.; MING-JIUM SHIEH ; JIA-YUSH YEN ; Chen C.-H.; Lin, Win-Li | Chinese Journal of Medical and Biological Engineering | 0 | ||
205 | 1998 | A Path-Following Control Algorithm for Manufacturing Systems Based Upon the Decomposed Contour Error | ho H.-C.; Yen J.-Y.; JIA-YUSH YEN | Journal of Mechanics | |||
206 | 1998 | Experimental investigation of ejector performance based upon different refrigerants | Chen, S.-L.; Yen, J.-Y.; Huang, M.-Ch.; JIA-YUSH YEN | ASHRAE Transactions | |||
207 | 1998 | Path-following control algorithm for manufacturing systems based upon the decomposed contour error | JIA-YUSH YEN | Chinese Journal of Mechanics Series A | 0 | ||
208 | 1998 | 雙軸超高精度磁浮定位機構之驅動量測與設計─子計劃一:驅動及機構設計與製作(III) | 顏家鈺 | ||||
209 | 1998 | 輕量模組化CNC工具機研發─子計劃二:CNC伺服系統設計 | 顏家鈺 | ||||
210 | 1998 | A novel track accessing servo design for a dual actuator system | Wu, Gwo-Huei; Yen, Jia-Yush | Bulletin of the College of Engineering | |||
211 | 1998 | Specific absorption rate ratio patterns of cylindrical ultrasound transducers for breast tumors | WIN-LI LIN ; JIA-YUSH YEN ; YUNG-YAW CHEN ; Cheng K.-S.; MING-JIUM SHIEH | Medical Physics | 4 | 4 | |
212 | 1997 | Stability of PDF Controller with a Stick-Slip Friction Drive Device | Yen, J.Y.; Huang, C.J.; Lu, S.S.; YenJY | ASMS Transactions on Dynamic Systems | |||
213 | 1997 | A trajectory feedback control for the computer disk filetrack-accessing/following servo | Yen, J.Y.; Tsai, S.Z.; YenJY | IEEE Transactions on Industrial Electronics | |||
214 | 1997 | 機砲模擬器硬體設計與製作(III)-子計畫一 | 顏家鈺 | ||||
215 | 1997 | An Artificial Neural Network for Double Exposure PIV Image Analysis | Chen, P. H.; JIA-YUSH YEN ; Chen J.-L. | Experiments in Fluids | 7 | 7 | |
216 | 1997 | 雙軸超高精度磁浮定位機構之驅動、量測與設計─子計劃一:驅動及機構設計與製作(Ⅰ) | 顏家鈺 | ||||
217 | 1997 | Inverse estimation of transducer parameters with artificial neural network for ultrasound hyperthermia | Chen, Y.-Y.; Lin, W.-L.; Lu, D.-C.; Yen, J.-Y.; JIA-YUSH YEN | Biomedical Engineering - Applications, Basis and Communications | |||
218 | 1997 | Practical implementation of a trajectory feedback control algorithm for a low cost computer disk drive servo | JIA-YUSH YEN | Journal of Control Systems and Technology | 0 | ||
219 | 1997 | A trajectory feedback control for the computer disk file track-accessing/following servo | Yen, J.-Y.; JIA-YUSH YEN | IEEE Transactions on Industrial Electronics | 1 | ||
220 | 1997 | Power intensity patterns of an annular array ultrasound transducer used in intracavitary hyperthermia | Win-Li Lin ; Cehn Y.-Y.; JIA-YUSH YEN ; MING-JIUM SHIEH ; Chang C.-J. | Biomedical Engineering - Applications, Basis and Communications | 0 | ||
221 | 1997 | 半導體關鍵設備研發─子計畫五:半導體製程設備步進器定位機構研發(I) | 顏家鈺 | ||||
222 | 1997 | Modeling of ultrasound temperature distribution with artificial neural network | Chen Y.-Y.; MING-JIUM SHIEH ; JIA-YUSH YEN ; Chen C.-H.; Win-Li Lin | Chinese Journal of Medical and Biological Engineering | 0 | ||
223 | 1997 | Theoretical and experimental investigations of a packaged ice-storage air-conditioning system | JIA-YUSH YEN | Journal of the Chinese Society of Mechanical Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao | 5 | ||
224 | 1997 | Control of intensity field for ultrasound hyperthermia | JIA-YUSH YEN ; MING-JIUM SHIEH ; Jin K.-W.; Chen Y.-Y.; Win-Li Lin | Chinese Journal of Medical and Biological Engineering | 0 | ||
225 | 1996 | A fuzzy cell-mapping feedback control algorithm for the satellite attitude manoeuvring control | Yen, Jia-Yush ; Tarng, Shiou-Wen | Fuzzy Systems Symposium | 0 | 0 | |
226 | 1996 | Servo design for a 3-d laser-tracking ivieasurement system | Yen J.-Y.; Jeng C.-S.; JIA-YUSH YEN | Journal of Dynamic Systems, Measurement and Control | 5 | 4 | |
227 | 1996 | 半導體製程設備步進器定位機構研發-子計劃一:步進器定位機構設計與製作(1/3) | 顏家鈺 | ||||
228 | 1996 | Effects of amplitude on the power intensity distribution of an annular array ultrasound transducer used in intracavitary hyperthermia | Lin, Win-Li ; JIA-YUSH YEN ; Chang C.-J.; Lin S.-Y.; MING-JIUM SHIEH | Biomedical Engineering - Applications, Basis and Communications | 0 | ||
229 | 1996 | Fuzzy cell-mapping feedback control algorithm for the satellite attitude maneuvering control | Yen, J.-Y.; Tarng, S.-W.; JIA-YUSH YEN | Asian Fuzzy Systems Symposium | |||
230 | 1996 | 半導體製程設備步進器定位機構研究計畫─半導體製程設備步進器定位機構研發─子計畫一:步進器定位機構設計與製作(1/3) | 顏家鈺 | ||||
231 | 1996 | The Design of a Low Cost Motion Chair for Video Games and MPEG Video Playback | Huang, Chung-Hsi; Yen, Jia-Yush ; Ouhyoung, Ming ; MING OUHYOUNG ; JIA-YUSH YEN | IEEE Transactions on Consumer Electronics | 8 | 5 | |
232 | 1996 | 輕模組化CNC工具機研發─輕量模組化CNC工具機研發--子計畫二:伺服系統設計 | 顏家鈺 | ||||
233 | 1996 | 機砲模擬器硬體設計與製作(Ⅱ) | 顏家鈺 | ||||
234 | 1995 | An analysis of the Fly-height characteristics in a magnetic tape drive | Yen, Jia-Yush ; Chang, Jeng-Yeh; Wang, Whei-Li; Jeng, Wen-Hong | Bulletin of the College of Engineering | |||
235 | 1995 | Stability of PDF controller with stick-slip friction device | Huang, Chih-Jung; Yen, Jia-Yush ; JIA-YUSH YEN | American Control Conference | 6 | 2 | |
236 | 1995 | 曲面加工機之刀具回饋控制器設計 | 顏家鈺 | ||||
237 | 1995 | Local stabilization of a single machine system using the direct nyquist array method | Hwang T.-Y.; Yen J.-Y.; Lu S.-S.; JIA-YUSH YEN | Electric Machines and Power Systems | |||
238 | 1995 | Fuzzy tracking control for disk file servo | Chen, Yung-Yaw; Chen, Hon-E.; Yen, Jia-Yush; JIA-YUSH YEN | IEEE International Conference on Fuzzy Systems | |||
239 | 1995 | 雙軸馬達驅動穩定式機砲之模擬系統硬體製作 | 顏家鈺 | ||||
240 | 1995 | Bang-bang based fuzzy controller for time optimal minimum chattering servo systems | Hwang, Tsong-Yau; Yen, Jia-Yush; Lu, Shui-Shong; JIA-YUSH YEN | Electric Machines and Power Systems | |||
241 | 1995 | 曲面加工機之刀具回饋控制器設計(II) | 顏家鈺 | ||||
242 | 1994 | A Preliminary Study for Ultrasound Hyperthermia System and Intracavitary Heating Transducers | Lu, Bing-Yuh; Lin, Win-Li; Chen, Yung-Yaw ; Yen, Jia-Yush ; and Kuo, Te-Son; 陳永耀 ; 顏家鈺 ; 郭德盛 | Biomedical Engineering Society Symposium | |||
243 | 1994 | A fuzzy cell mapping method for a sub-optimal control implementation | Yen, J.Y.; Chao, W.C.; Lu, S.S.; JIA-YUSH YEN | Control Engineering Practice | 8 | ||
244 | 1994 | 高精度磁碟機讀寫頭伺服機構研究- 子計畫(二): 磁碟機滑塊減振控制 | 顏家鈺 | ||||
245 | 1993 | Fuzzy Bang-Bang Controller for Time Optimal and Minimum Chattering Servo Systems | Hwang, T. Y.; JIA-YUSH YEN ; Lu, Shui-Shong | FAC Congress | 0 | 0 | |
246 | 1993 | Fuzzy scheduling controller for a computer disk file track-following servo | Yen, Jia-Yush ; Wang, Fu-Jeng; Chen, Yung-Yaw | IEEE Transactions on Industrial Electronics | |||
247 | 1993 | A fuzzy scheduling controller for the computer disk file track-following servo | Yen, Jia-Yush ; Wang, fi-Jeng; Chen, Yung-Yaw | Second IEEE International Conference on Fuzzy Systems, 1993 | 0 | 0 | |
248 | 1993 | Fuzzy Decoupling Controller:An Application to Optical Disk Head Actuator | 呂秀雄; Hwang, T. Y.; 顏家鈺 ; Lu, Shui-Shong; Yen, Jia-Yush | Chinese Automatic Control Conference | |||
249 | 1993 | 電腦磁碟機驅動器之鑑別與控制(II) | 顏家鈺 ; 陳希立 | ||||
250 | 1993 | A skeleton-retrieving technique for aiding modular-fixtures design | Wu, M.-C.; Yen, J.-Y.; JIA-YUSH YEN | International Journal of Advanced Manufacturing Technology | |||
251 | 1993 | A Fuzzy Scheduling Controller for a ComputerDisk File Track-Following Servo | Chen, Y.-Y.; JIA-YUSH YEN | IEEE Transactions on Industrial Electronics | 7 | ||
252 | 1993 | Fuzzy scheduling controller for the computer disk file track-following servo | Yen, Jia-Yush; Wang, Fu-Jeng; Chen, Yung-Yaw; JIA-YUSH YEN | 1993 IEEE International Conference on Fuzzy Systems | |||
253 | 1993 | Servo design for a laser 3D measurement system | JIA-YUSH YEN | American Control Conference | 0 | ||
254 | 1993 | 人造衛星姿態控制 | 顏家鈺 ; 陳永耀 | ||||
255 | 1993 | 無人飛行器之智慧型導航系統 | 顏家鈺 ; 陳永耀 | ||||
256 | 1993 | A fuzzy scheduling controller for a computer disk file track-following servo | Yen, J.Y.; Wang, F.J.; Chen, Y.Y.; YenJY | IEEE Transaction on Industrial Electronics | |||
257 | 1993 | 微感應器與模糊控制(I):磁碟機飛行高度伺服之應用 | 顏家鈺 ; 陳永耀 | ||||
258 | 1993 | 磁帶機之運轉速度與磁帶振動分析 | 顏家鈺 ; 鄭文弘 | ||||
259 | 1992 | Computer Disk File Track Accessing Controller Design Based upon Cell-to-Cell Mapping | Lu, Shui-Shong; Yen, Jia-Yush ; Chao, W. C.; 呂秀雄; 顏家鈺 | 1992 American Control Conference, Chicago, IL(1992.06) | 12 | ||
260 | 1992 | On the Application of Cell-to-Cell Mapping to Optimal Control | 呂秀雄; Chao, W. C.; 顏家鈺 ; Lu, Shui-Shong; Yen, Jia-Yush | 1992 Japan-USA Symposium on Flex Automation | |||
261 | 1992 | Servo controller design for an optical disk drive using fuzzy control algorithm | JIA-YUSH YEN | 6 | |||
262 | 1992 | Servo controller design for an optical disk drive using fuzzy control algorithm | Yen Jia-Yush; Lin Chuan-Shan; Li Chung-Han; Chen Yung-Yaw; JIA-YUSH YEN | ||||
263 | 1992 | On the application of cell-to-cell mapping for optimal control | Chao Wei-Chia; Yen Jia-Yush; Lu Shui-Shong; JIA-YUSH YEN | ||||
264 | 1992 | 撓性系統之智慧型控制-光碟機驅動器之應用 | 陳永耀 ; 顏家鈺 | ||||
265 | 1991 | 電腦磁碟驅動器之鑑別與控制 | 顏家鈺 | ||||
266 | 1991 | 電腦磁碟機驅動器之鑑別與控制(I) | 顏家鈺 ; 陳希立 | ||||
267 | 1990 | Track-following controller design for a compound disk drive actuator | JIA-YUSH YEN | Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME | 27 | 15 | |
268 | - | 具備聚焦功能的軌道型太陽能追蹤系統 | 顏家鈺 | ||||
269 | - | 高速大角度光學掃描機構 | 顏家鈺 |