第 1 到 126 筆結果,共 126 筆。
公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 | |
---|---|---|---|---|---|---|---|
1 | 1994 | A fuzzy cell mapping method for a sub-optimal control implementation | Yen, J.Y.; Chao, W.C.; Lu, S.S.; JIA-YUSH YEN | Control Engineering Practice | 8 | ||
2 | 1993 | A Fuzzy Scheduling Controller for a ComputerDisk File Track-Following Servo | Chen, Y.-Y.; JIA-YUSH YEN | IEEE Transactions on Industrial Electronics | 7 | ||
3 | 2002 | A genetic algorithm-based parameter-tuning algorithm for multi-dimensional motion control of a computer numerical control machine tool | Kuo, L.-Y.; Yen, J.-Y.; JIA-YUSH YEN | Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture | |||
4 | 1999 | A new compensator for servo systems with position dependent friction | Yen, J.-Y.; Huang, S.-J.; Lu, S.-S.; JIA-YUSH YEN | Journal of Dynamic Systems, Measurement and Control | 3 | ||
5 | 2003 | A Novel Fine Track-Seeking Scheme for Optical Storage Device | Huang, Jao-Ming; Yen, Jia-Yush | IEEE Transactions on Consumer Electronics | 2 | 2 | |
6 | 2015 | A Novel Soundproof Ventilation Plant Design with High Performance and No Energy Consumption | Yu, Y.-L.; Chao, Y.-T.; Lee, L.-C.; Yen, J.-Y.; Fan, Y.-C.; JIA-YUSH YEN | Mathematical Problems in Engineering | 1 | ||
7 | 2013 | A robust variable sampling time BLDC motor control design based upon μ-synthesis | Hung, C.-W.; Yen, J.-Y.; JIA-YUSH YEN | The Scientific World Journal | |||
8 | 2015 | A smart-card E-paper display system based on RF power harvesting | Chang, H.-C.; Yen, J.-Y.; Huang, C.-H.; Chen, G.-L.; Hsu, C.-K.; JIA-YUSH YEN | IETE Journal of Research | 0 | ||
9 | 1997 | A trajectory feedback control for the computer disk file track-accessing/following servo | Yen, J.-Y.; JIA-YUSH YEN | IEEE Transactions on Industrial Electronics | 1 | ||
10 | 2015 | A Turbidity Test Based Centrifugal Microfluidics Diagnostic System for Simultaneous Detection of HBV, HCV, and CMV | Chang, Hung-Cheng; Chao, Yu-Tin; Yen, Jia-Yush ; Yu, Ya-Lin; Lee, Chun-Nan; Ho, Bing-Ching; Liu, Kou-Chen; Fang, Jiunn; Lin, Chii-Wann; Lee, Jiun-Haw; JIUN-HAW LEE ; CHII-WANN LIN | Advances in Materials Science and Engineering | |||
11 | 2007 | A variable-sampling controller for brushless DC motor drives with low-resolution position sensors | Hung, C.-W.; Lin, C.-T.; Liu, C.-W.; Yen, J.-Y.; CHIH-WEN LIU ; JIA-YUSH YEN | IEEE Transactions on Industrial Electronics | 59 | 47 | |
12 | 2004 | Active Vibration Isolation For A Long Range Scanning Tunneling Microscope | Lan, Kuo-Jung; Yen, Jia-Yush ; Kramar, John A. | Asian Journal of Control | 8 | 8 | |
13 | 2005 | Active vibration isolation of a large stroke scanning probe microscope by using discrete sliding mode control | Yen, J.-Y.; Lan, K.-J.; Kramar, J.A.; JIA-YUSH YEN | Sensors and Actuators, A: Physical | |||
14 | 2020 | Adaptation-Enhanced Model-Based Control with Charge Feedback for Piezo-Actuated Stage | Yeh, Y.-L.; Yen, J.-Y.; JIA-YUSH YEN | Asian Journal of Control | 2 | 2 | |
15 | 2017 | An Adaptive Unknown Periodic Input Observer for Discrete-Time LTI SISO Systems | Lin S.-Y.; Yen J.-Y.; Chen M.-S.; Chang S.-H.; Kao C.-Y.; JIA-YUSH YEN | IEEE Transactions on Automatic Control | 7 | ||
16 | 2005 | AFM probe controller design based on μ-synthesis | Lan, K.-J.; Yen, J.-Y.; Lee, C.-K.; Lin, Y.-M.; Chen, C.-H.; JIA-YUSH YEN | Asian Journal of Control | |||
17 | 2005 | An AFM Probe Controller Design Based on μ-synthesis | Lan, Kuo-Jung; Yen, Jia-Yush ; Lee, Chih-Kung ; Lin, Yi-Ming; Chen, Cheng-Hung | Asian Journal of Control | 2 | ||
18 | 1995 | An analysis of the Fly-height characteristics in a magnetic tape drive | Yen, Jia-Yush ; Chang, Jeng-Yeh; Wang, Whei-Li; Jeng, Wen-Hong | Bulletin of the College of Engineering | |||
19 | 2008 | Application of the continuous no-reset switching iterative learning control on a novel optical scanning system | Yen, Jia-Yush ; Yeh, Yea-Chin; Peng, Yung-Hao; Lee, Jyh-Fa | Mechatronics | 18 | 15 | |
20 | 1999 | Application of the least squares algorithm to the observer design for linear time-varying systems | Chen, M.-S.; Yen, J.-Y.; JIA-YUSH YEN | IEEE Transactions on Automatic Control | |||
21 | 2006 | Application of the no-rest switching iterative learning control on a novel optical scanning system | Yeh, Y.-C.; Yen, J.-Y.; Lee, J.-F.; JIA-YUSH YEN | Journal of the Chinese Society of Mechanical Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao | |||
22 | 1997 | An Artificial Neural Network for Double Exposure PIV Image Analysis | Chen, P. H.; JIA-YUSH YEN ; Chen J.-L. | Experiments in Fluids | 7 | 7 | |
23 | 1995 | Bang-bang based fuzzy controller for time optimal minimum chattering servo systems | Hwang, Tsong-Yau; Yen, Jia-Yush; Lu, Shui-Shong; JIA-YUSH YEN | Electric Machines and Power Systems | |||
24 | 2018 | Battery cell modeling and online estimation of the state of charge of a lithium-ion battery | Tsai I.-H.; Yu K.-H.; Tseng A.; Yen J.-Y.; Fu T.-T.; Huang E.; JIA-YUSH YEN | Journal of the Chinese Institute of Engineers, Series A/Chung-kuo Kung Ch'eng Hsuch K'an | 4 | ||
25 | 2017 | Biomechanical Simulation of Stress Concentration and Intraocular Pressure in Corneas Subjected to Myopic Refractive Surgical Procedures | Shih, P.-J.; I-JONG WANG ; Cai, W.-F.; JIA-YUSH YEN ; PO-JEN SHIH | Scientific Reports | 24 | 16 | |
26 | 2010 | Comparison of sensor fusion methods for an SMA-based hexapod biomimetic robot | Liu, S.-H.; Huang, T.-S.; Yen, J.-Y.; JIA-YUSH YEN | Robotics and Autonomous Systems | |||
27 | 2018 | Compensation for the residual error of the voltage drive of the charge control of a piezoelectric actuator | Liu S.-T.; Yen J.-Y.; JIA-YUSH YEN | Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME | 6 | 6 | |
28 | 2013 | Construction of a high frequency and high reflectance shutter for a direct write EUV lithography system | Chuang, J.-Y.; Yen, J.-Y.; Juang, B.-Y.; Weng, W.-P.; Lin, M.-H.; JIA-YUSH YEN | International Journal of Automation and Smart Technology | |||
29 | 1997 | Control of intensity field for ultrasound hyperthermia | JIA-YUSH YEN ; MING-JIUM SHIEH ; Jin K.-W.; Chen Y.-Y.; Win-Li Lin | Chinese Journal of Medical and Biological Engineering | 0 | ||
30 | 2015 | A corneal elastic dynamic model derived from Scheimpflug imaging technology. | WEN-PIN SHIH ; JIA-YUSH YEN ; I-JONG WANG ; PO-JEN SHIH | Ophthalmic & Physiological Optics | 17 | 15 | |
31 | 2005 | Design for control of a flexure jointed optical servo scanning platform | Yeh, Yea-Chin; Yen, Jia-Yush ; Peng, Yung-Hao; JIA-YUSH YEN | IEEE International Conference on Mechatronics | 0 | 0 | |
32 | 2006 | Design of a novel 6-DOF planar maglev system | Lai, Y.-C.; Yen, J.-Y.; JIA-YUSH YEN | Journal of Magnetism and Magnetic Materials | 2 | ||
33 | 2000 | Design optimization for an LPG automobile engine | Wu, Tzann-Dwo; Chen, Yih-Nan; Yen, Jia-Yush ; Jaw, Shenq-Yuh | International Journal of | |||
34 | 2004 | Development of an Intelligent Energy Management Network for Building Automation | Huang, Hsiao-Yi; JIA-YUSH YEN ; SIH-LI CHEN ; Ou, Feng-Chu | IEEE Transactions on Automation Science and Engineering | 35 | 32 | |
35 | 2020 | Discussion and improvement of a blade-type XBPM with coupling suppression by compensating calibration coefficients | Chuang, J.-Y.; Lin, Y.-Z.; Hsiao, Y.-M.; Liu, Y.-C.; Shu, D.; Kuan, C.-K.; Wu, H.; Sheng, I.-C.; Cheng, Y.-T.; Shueh, C.; Chang, C.-C.; Chan, C.-K.; Yen, J.-Y.; JIA-YUSH YEN | Nuclear Instruments and Methods in Physics Research, Section A: Accelerators, Spectrometers, Detectors and Associated Equipment | 2 | ||
36 | 2008 | Downcoiler surface fault prediction for a hot strip steel mill | Chuang, W.-L.; Chen, C.-H.; Yen, J.-Y.; Hsu, Y.-L.; JIA-YUSH YEN | Institution of Mechanical Engineers. Part I: Journal of Systems and Control Engineering | 1 | ||
37 | 1999 | Dual mode control of a system with friction | Huang, S.-J.; Yen, J.-Y.; Lu, S.-S.; JIA-YUSH YEN | IEEE Transactions on Control Systems Technology | |||
38 | 2019 | Dynamic human object recognition by combining color and depth information with a clothing image histogram | Wang Y.-H.; Wang T.-W.; Yen J.-Y.; JIA-YUSH YEN | International Journal of Advanced Robotic Systems | 2 | 2 | |
39 | 2005 | Effect of force control algorithms on the scanning probe microscope lithography system | Yen, J.-Y.; Lin, I.-M.; Lee, C.-K.; JIA-YUSH YEN ; CHIH-KUNG LEE | Review of Scientific Instruments | |||
40 | 2002 | Effect of mechanical stress on characteristics of silicon thermal oxides | Huang, C. H.; JENN-GWO HWU ; JIA-YUSH YEN | Japanese Journal of Applied Physics | 10 | 10 | |
41 | 2012 | Effectiveness of external respiratory surrogates for in vivo liver motion estimation | Chang K.-H.; MING-CHIH HO ; CHI-CHUAN YEH ; Chen Y.-C.; Lian F.-L.; Win-Li Lin ; Yen J.-Y.; FENG-LI LIAN ; YUNG-YAW CHEN ; JIA-YUSH YEN | Medical Physics | 7 | 4 | |
42 | 1996 | Effects of amplitude on the power intensity distribution of an annular array ultrasound transducer used in intracavitary hyperthermia | Lin, Win-Li ; JIA-YUSH YEN ; Chang C.-J.; Lin S.-Y.; MING-JIUM SHIEH | Biomedical Engineering - Applications, Basis and Communications | 0 | ||
43 | 2000 | Enhancement of silicon oxidation rate due to tensile mechanical stress | JENN-GWO HWU ; JIA-YUSH YEN | Applied Physics Letters | 38 | 35 | |
44 | 2017 | Estimation of the Corneal Young's Modulus in Vivo Based on a Fluid-Filled Spherical-Shell Model with Scheimpflug Imaging | Shih, P.-J.; Huang, C.-J.; Huang, T.-H.; Lin, H.-C.; Yen, J.-Y.; I-JONG WANG ; Cao, H.-J.; Shih, W.-P.; JIA-YUSH YEN ; CHI-AN DAI ; PO-JEN SHIH | Journal of Ophthalmology | 24 | 18 | |
45 | 1998 | Estimation of ultrasound transducer and tissue parameters with artificial neural network | Chen Y.-Y.; MING-JIUM SHIEH ; JIA-YUSH YEN ; Chen C.-H.; Lin, Win-Li | Chinese Journal of Medical and Biological Engineering | 0 | ||
46 | 2017 | Fabrication of large-scale micro-structures by two-photon polymerization with a long-stroke precision stage | Wang F.-C. ; Wang K.-A.; Chung T.-T.; JIA-YUSH YEN | Advances in Mechanical Engineering | 5 | 5 | |
47 | 2019 | Facile fabrication of superporous and biocompatible hydrogel scaffolds for artificial corneal periphery | Lee, Y.-P.; Liu, H.-Y.; Lin, P.-C.; Lee, Y.-H.; Yu, L.-R.; Hsieh, C.-C.; Shih, P.-J.; Shih, W.-P.; I-JONG WANG ; Yen, J.-Y.; JIA-YUSH YEN ; CHI-AN DAI ; CHIH-CHEN HSIEH ; PO-JEN SHIH | Colloids and Surfaces B: Biointerfaces | 23 | 18 | |
48 | 2020 | Featured Surface Matching Method for Liver Image Registration | Su, S.-T.; MING-CHIH HO ; Yen, J.-Y.; JIA-YUSH YEN ; YUNG-YAW CHEN | IEEE ACCESS | 3 | 3 | |
49 | 2011 | Focal point tracking system for concentration solar power collection | JIA-YUSH YEN ; Yeh, Pei-Ying; Yen, Po-Ching; Yen, Jia-Yush ; Wu, Tsung-Tsong ; Liu, Pei-Ling ; Wu, Chia-Ling ; Peng, Ching-Yu | Renewable and Sustainable Energy Reviews | 10 | 9 | |
50 | 2015 | Frequency domain effect of a hysteresis suppression system with inverse Preisach model based control | Tsai H.-F.; Yen J.-Y.; Chen L.-S.; Chang H.-C.; Chen J.J.H.; Wang F.-C.; JIA-YUSH YEN ; FU-CHENG WANG | International Journal of Automation and Smart Technology | 2 | 0 | |
51 | 2002 | Frequency-domain identification algorithms for servo systems with friction | Chen, Yung-Yaw ; Huang, Pai-yi; Yen, Jia-Yush | IEEE Transactions on Control Systems Technology | 67 | 41 | |
52 | 1993 | Fuzzy Bang-Bang Controller for Time Optimal and Minimum Chattering Servo Systems | Hwang, T. Y.; JIA-YUSH YEN ; Lu, Shui-Shong | FAC Congress | 0 | 0 | |
53 | 1996 | A fuzzy cell-mapping feedback control algorithm for the satellite attitude manoeuvring control | Yen, Jia-Yush ; Tarng, Shiou-Wen | Fuzzy Systems Symposium | 0 | 0 | |
54 | 1993 | Fuzzy scheduling controller for a computer disk file track-following servo | Yen, Jia-Yush ; Wang, Fu-Jeng; Chen, Yung-Yaw | IEEE Transactions on Industrial Electronics | |||
55 | 1993 | A fuzzy scheduling controller for a computer disk file track-following servo | Yen, J.Y.; Wang, F.J.; Chen, Y.Y.; YenJY | IEEE Transaction on Industrial Electronics | |||
56 | 1999 | Fuzzy sliding mode controlled slider crank mechanism using a PM synchronous servo motor drive | Fung, R. F.; Chen, K. W.; Yen, J. Y.; JIA-YUSH YEN | International Journal of Mechanical Sciences | |||
57 | 1999 | Fuzzy sliding mode controlled slider-crank mechanism using a PM synchronous servo motor drive | Fung, Rong-Fong; Chen, Ken-Wang; Yen, Jia-Yush; Fung, R.-F.; Chen, K.-W.; Yen, J.-Y.; JIA-YUSH YEN | International Journal of Mechanical Sciences | |||
58 | 2011 | High performance FOV switching mechanism design for an infrared zoom lens | Huang, C.-J.; Tsai, C.-S.; Chen, B.-R.; Yen, J.-Y.; Lee, J.-F.; Lin, L.-H.; Chen, M.-S.; JIA-YUSH YEN | International Journal of Automation and Smart Technology | |||
59 | 2017 | High-performance and high-precision servo control of a single-deck dual-axis PMLSM stage | Huang W.-L.; Kuo F.-C.; Chou S.-C.; Yen J.-Y.; Tsai I.-H.; Chung T.-T.; Hung C.-W.; JIA-YUSH YEN | International Journal of Advanced Manufacturing Technology | 3 | ||
60 | 2023 | Human Posture Transition-Time Detection Based upon Inertial Measurement Unit and Long Short-Term Memory Neural Networks | Kuo, Chun Ting; Lin, Jun Ji; Jen, Kuo Kuang; WEI-LI HSU ; FU-CHENG WANG ; Tsao, Tsu Chin; JIA-YUSH YEN | Biomimetics | 2 | 0 | |
61 | 2015 | IEET引領新世紀的工程及科技教育認證 | 顏家鈺 | 評鑑雙月刊 | |||
62 | 2013 | Image based in situ electron-beam drift detection by silicon photodiodes in scanning-electron microscopy and an electron-beam lithography system | Y. H. Kuo; C. J. Wu; F. T. Kuo; YUNG-YAW CHEN ; JIA-YUSH YEN | Microelectronic Engineering | 2 | 2 | |
63 | 2016 | Impacts of sensor layouts on the performance of a long-stroke nano-positioning stage | Wang F.-C. ; Wang K.-A.; Chen Y.-Y.; Chen H.-J.; JIA-YUSH YEN | Advances in Mechanical Engineering | 3 | 4 | |
64 | 2011 | In situ beam drift detection using a two-dimensional electron-beam position monitoring system for multiple-electron-beam-direct-write lithography | CHIEH-HSIUNG KUAN ; Tsai, Kuen-Yu ; YUNG-YAW CHEN ; JIA-YUSH YEN | Journal of Vacuum Science and Technology B:Nanotechnology and Microelectronics | 4 | ||
65 | 2017 | Integrating wavelet transformation with Markov random field analysis for the depth estimation of light-field images | Lee W.-Y.; Li C.-Y.; Yen J.-Y.; JIA-YUSH YEN | IET Computer Vision | 6 | ||
66 | 1997 | Inverse estimation of transducer parameters with artificial neural network for ultrasound hyperthermia | Chen, Y.-Y.; Lin, W.-L.; Lu, D.-C.; Yen, J.-Y.; JIA-YUSH YEN | Biomedical Engineering - Applications, Basis and Communications | |||
67 | 2000 | An investigation of power deposition patterns for scanned ultrasound arrays | Win-Li Lin ; Chen Y.-Y.; Ju K.-C.; JIA-YUSH YEN ; MING-JIUM SHIEH | Biomedical Engineering - Applications, Basis and Communications | 0 | ||
68 | 2019 | Liver image registration by finite element model for deriving tumour and vessel locations | MING-CHIH HO ; Su, S.-T.; Hsu, W.-J.; Yen, J.-Y.; JIA-YUSH YEN ; YUNG-YAW CHEN | International Journal of Electrical Engineering | 0 | 0 | |
69 | 1995 | Local stabilization of a single machine system using the direct nyquist array method | Hwang T.-Y.; Yen J.-Y.; Lu S.-S.; JIA-YUSH YEN | Electric Machines and Power Systems | |||
70 | 2011 | Longitudinal stitching of sub-micron periodic fringes on a roller | Chen, L.-S.; Yen, J.-Y.; Chen, Y.-P.; Wang, L.A.; Chung, T.-T.; Lin, H.-I.; Chen, P.-H.; Chang, S.-H.; JIA-YUSH YEN ; LON A. WANG ; TIEN-TUNG CHUNG | Microelectronic Engineering | 2 | ||
71 | 2023 | Machine Learning for Human Motion Intention Detection | Lin, Jun Ji; Hsu, Che Kang; WEI-LI HSU ; Tsao, Tsu Chin; FU-CHENG WANG ; JIA-YUSH YEN | Sensors | 0 | 0 | |
72 | 2001 | A mechatronics approach to the servo design for a maglev system | Yen, Jia-Yush ; Lin, Jia-Hua | American Control Conference | 0 | 0 | |
73 | 2004 | A Mechatronics Approach to the Servo Design for A Meglev System | Yen, Jia-Yush ; Lin, Jia-Hua | Bulletin of the College of Engineering | 1 | ||
74 | 2019 | Micro-lens fabrication by a long-stroke precision stage with switching control based on model response prediction | Wang F.-C. ; Peng Y.-K.; Lu J.-F.; Chung T.-T.; JIA-YUSH YEN | Microsystem Technologies | 1 | 2 | |
75 | 2015 | Minimally invasive surgery instruments based on a four-bar linkage design | Kam, M.; Yen, J.-Y.; JIA-YUSH YEN | International Journal of Automation and Smart Technology | |||
76 | 2018 | Modeling of railway turnout geometry in the frog area with the vehicle wheel trajectory | Chiou S.-B.; Yen J.-Y.; JIA-YUSH YEN | Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit | 3 | ||
77 | 1997 | Modeling of ultrasound temperature distribution with artificial neural network | Chen Y.-Y.; MING-JIUM SHIEH ; JIA-YUSH YEN ; Chen C.-H.; Win-Li Lin | Chinese Journal of Medical and Biological Engineering | 0 | ||
78 | 2008 | Multivariable Robust Control of a Proton Exchange Membrane Fuel Cell System | Fu-Cheng Wang ; Hsuan-Tsung Chen; Yee-Pien Yang ; Jia-Yush Yen | Journal of Power Sources | 68 | 56 | |
79 | 2010 | Novel approach to fuzzy-wavelet ECG signal analysis for a mobile device | Tseng, C.-E.; Peng, C.-Y.; Chang, M.-W.; Yen, J.-Y.; Lee, C.-K.; Huang, T.-S.; JIA-YUSH YEN ; CHIH-KUNG LEE | Journal of Medical Systems | 6 | ||
80 | 1998 | A novel track accessing servo design for a dual actuator system | Wu, Gwo-Huei; Yen, Jia-Yush | Bulletin of the College of Engineering | |||
81 | 1999 | Optimal configuration of multiple-focused ultrasound transducers for external hyperthermia | WIN-LI LIN ; YUNG-YAW CHEN ; Lin, Shu-Yuh; JIA-YUSH YEN ; MING-JIUM SHIEH ; Kuo, Te-Son | Medical Physics | 9 | 7 | |
82 | 2014 | Output Feedback Sliding Mode Control-A Robust Observer Approach for SISO Systems | JIA-YUSH YEN | 中國機械工程學刊 | 0 | ||
83 | 2008 | Parameter identification for a solid modeling based grinding machine controller design | Liu, Shu-Hung; Lai, Yi-Chih; Yen, Jia-Yush | International Journal of Machine Tools and Manufacture | |||
84 | 2008 | Parameter identification when designing a solid-modeling-based grinding-machine controller | JIA-YUSH YEN ; Liu, Shu-Hung; Lai, Yi-Chih; Yen, Jia-Yush | International Journal of Machine Tools and Manufacture | 1 | 1 | |
85 | 1998 | A Path-Following Control Algorithm for Manufacturing Systems Based Upon the Decomposed Contour Error | ho H.-C.; Yen J.-Y.; JIA-YUSH YEN | Journal of Mechanics | |||
86 | 1998 | Path-following control algorithm for manufacturing systems based upon the decomposed contour error | JIA-YUSH YEN | Chinese Journal of Mechanics Series A | 0 | ||
87 | 2004 | Performance robustness and stiffness analysis on a machine tool servo design | Yen, Jia-Yush ; JIA-YUSH YEN ; Chang, Hui-Man | International Journal of Machine Tools and Manufacture | 15 | 14 | |
88 | 1997 | Power intensity patterns of an annular array ultrasound transducer used in intracavitary hyperthermia | Win-Li Lin ; Cehn Y.-Y.; JIA-YUSH YEN ; MING-JIUM SHIEH ; Chang C.-J. | Biomedical Engineering - Applications, Basis and Communications | 0 | ||
89 | 1997 | Practical implementation of a trajectory feedback control algorithm for a low cost computer disk drive servo | JIA-YUSH YEN | Journal of Control Systems and Technology | 0 | ||
90 | 2019 | Precise railway alignment measurements of the horizontal circular curves and the vertical parabolic curves using the chord method | Chiou S.-B.; Yen J.-Y.; JIA-YUSH YEN | Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit | 10 | ||
91 | 2022 | Precision positioning control of a long-stroke stage employing multiple switching control | FU-CHENG WANG ; Lu, J.-F.; WEI-JIUN SU ; JIA-YUSH YEN | Microsystem Technologies | 1 | 3 | |
92 | 2013 | Precision tracking of a piezo-driven stage by charge feedback control | Chen, L.-S.; Chen, J.J.H.; Kuo, F.-C.; Chen, M.-S.; Chung, B.-I.; YUNG-YAW CHEN ; JIA-YUSH YEN | Precision Engineering | 23 | 17 | |
93 | 2008 | Quality assurance of engineering education through accreditation of programs in Taiwan | Liu M.; Chang P.-F.; Wo A.M.; Yen J.-Y.; Yang Y.-B.; Wei C.-H.; JIA-YUSH YEN | International Journal of Engineering Education | |||
94 | 2005 | Radial fine seek control with fault protection in a digital versatile disc player | JIA-YUSH YEN ; Huang, Jao-Ming; Yen, Jia-Yush | Mechatronics | 3 | 2 | |
95 | 2017 | Real-time, energy-efficient traction allocation strategy for the compound electric propulsion system | Li K.; Chou F.-C.; JIA-YUSH YEN ; Kang LI | IEEE/ASME Transactions on Mechatronics | 25 | 21 | |
96 | 2009 | Research on three dimensional machining effects using atomic force microscope | Mao, Y.-T.; Kuo, K.-C.; Tseng, C.-E.; Huang, J.-Y.; Lai, Y.-C.; Yen, J.-Y.; Lee, C.-K.; Chuang, W.-L.; JIA-YUSH YEN ; CHIH-KUNG LEE | Review of Scientific Instruments | |||
97 | 2010 | Robust control design for vibration isolation of an electron beam projection lithography system | Wang, F.-C.; Hong, M.-F.; Yen, J.-Y.; Wang, Fu-Cheng; Hong, Min-Feng; Yen, Jia-Yush; FU-CHENG WANG ; JIA-YUSH YEN | Japanese Journal of Applied Physics | 6 | ||
98 | 2013 | Robust control for a pneumatic muscle actuator system | JIA-YUSH YEN | Transactions of the Canadian Society for Mechanical Engineering | 9 | 7 | |
99 | 2014 | Robust loop-shaping control for a nano-positioning stage | Wang F.-C. ; Chen L.-S.; Tsai Y.-C.; Hsieh C.-H.; JIA-YUSH YEN | Journal of Vibration and Control | 18 | 15 | |
100 | 2015 | Robust State-and-Disturbance Observer Design for Linear Non-minimum-phase Systems | JIA-YUSH YEN | Asian Journal of Control | 7 | 5 | |
101 | 1999 | Self-tuning fuzzy logic control for ultrasound hyperthermia with reference temperature based on objective functions | Chen Y.-Y.; Lin, Win-Li ; Liou H.-L.; Yen J.-Y.; JIA-YUSH YEN ; YUNG-YAW CHEN ; Win-Li Lin ; MING-JIUM SHIEH | Medical Physics | 9 | 8 | |
102 | 1996 | Servo design for a 3-d laser-tracking ivieasurement system | Yen J.-Y.; Jeng C.-S.; JIA-YUSH YEN | Journal of Dynamic Systems, Measurement and Control | 5 | 4 | |
103 | 1999 | Servo design for a high precision magnetic levitation linear bearing based on approximate input-output feedback linearization | Huang, Chao-Ming; Yen, Jia-Yush | Journal of Control System and Technology | |||
104 | 1999 | Servo design for a high stiffness linear repulsive magnetic-levitation bearing | Huang, Chao-Ming; Yen, Jia-Yush | American Control Conference | 2 | 0 | |
105 | 2001 | Servo parameter tuning for a 5-axis machine center based upon GA rules | JIA-YUSH YEN ; Kuo, Lun-Yu; Yen, Jia-Yush | International Journal of Machine Tools and Manufacture | 22 | 17 | |
106 | 1993 | A skeleton-retrieving technique for aiding modular-fixtures design | Wu, M.-C.; Yen, J.-Y.; JIA-YUSH YEN | International Journal of Advanced Manufacturing Technology | |||
107 | 2004 | Sliding mode control for active vibration isolation of a long range scanning tunneling microscope | JIA-YUSH YEN ; Lan, Kuo-Jung; Yen, Jia-Yush ; Kramar, John A. | Review of Scientific Instruments | 19 | 14 | |
108 | 2006 | Solid modeling based servo system design for a high speed micro grinding machine | Lee, Ruey-Jeng; JIA-YUSH YEN ; Chou, Kuan-Chien; Liu, Shu-Hung; Yen, Jia-Yush | International Journal of Machine Tools and Manufacture | 3 | 3 | |
109 | 2013 | Solution-refined method for electrostatic potential distribution of large-scale electron optics | Lee, Y.-M.; Li, J.-H.; Sheu, T.-W.-H.; Tsai, K.-Y.; KUEN-YU TSAI ; JIA-YUSH YEN ; JIA-HAN LI ; TONY W. H. SHEU | Japanese Journal of Applied Physics | 0 | 0 | |
110 | 1998 | Specific absorption rate ratio patterns of cylindrical ultrasound transducers for breast tumors | WIN-LI LIN ; JIA-YUSH YEN ; YUNG-YAW CHEN ; Cheng K.-S.; MING-JIUM SHIEH | Medical Physics | 4 | 4 | |
111 | 1997 | Stability of PDF Controller with a Stick-Slip Friction Drive Device | Yen, J.Y.; Huang, C.J.; Lu, S.S.; YenJY | ASMS Transactions on Dynamic Systems | |||
112 | 1995 | Stability of PDF controller with stick-slip friction device | Huang, Chih-Jung; Yen, Jia-Yush ; JIA-YUSH YEN | American Control Conference | 6 | 2 | |
113 | 2001 | Stress effect on the kinetics of silicon thermal oxidation | Yen, J. Y.; JENN-GWO HWU ; JIA-YUSH YEN | Journal of Applied Physics | 35 | 32 | |
114 | 2020 | Study on the transient response to the point-to-point motion controls on a dual-axes air-bearing planar stage | Kuo, F.-C.; Hsu, C.; Hsieh, M.-R.; Yen, J.-Y.; Chen, L.-C.; Chung, T.-T.; JIA-YUSH YEN ; FU-CHENG WANG ; LIANG-CHIA CHEN | International Journal of Advanced Manufacturing Technology | 3 | 2 | |
115 | 2019 | A Survey of Suspension Component Specifications and Vehicle Vibration Measurements in an Operational Railway System | Chiou S.-B.; Yen J.-Y.; JIA-YUSH YEN | Journal of Vibrational Engineering and Technologies | 2 | ||
116 | 1999 | System modeling and feedback linearization control of a precision repulsive maglev stage | JIA-YUSH YEN | Journal of the Chinese Society of Mechanical Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao | 0 | ||
117 | 2014 | Temperature effects on the magnetic properties of silicon-steel sheets using standardized toroidal frame | JIA-YUSH YEN | Scientific World Journal | 5 | 0 | |
118 | 2009 | The application of disturbance response decoupling to the vibration control of an electron beam lithography system | Wang, Fu-Cheng; Tsao, Yu-Chia; Yen, Jia-Yush; FU-CHENG WANG ; JIA-YUSH YEN | Japanese Journal of Applied Physics | |||
119 | 1996 | The Design of a Low Cost Motion Chair for Video Games and MPEG Video Playback | Huang, Chung-Hsi; Yen, Jia-Yush ; Ouhyoung, Ming ; MING OUHYOUNG ; JIA-YUSH YEN | IEEE Transactions on Consumer Electronics | 8 | 5 | |
120 | 1997 | Theoretical and experimental investigations of a packaged ice-storage air-conditioning system | JIA-YUSH YEN | Journal of the Chinese Society of Mechanical Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao | 5 | ||
121 | 1990 | Track-following controller design for a compound disk drive actuator | JIA-YUSH YEN | Journal of Dynamic Systems, Measurement and Control, Transactions of the ASME | 27 | 15 | |
122 | 2010 | Tracking control of shape-memory-alloy actuators based on self-sensing feedback and inverse hysteresis compensation | JIA-YUSH YEN ; Liu, Shu-Hung; Huang, Tse-Shih; Yen, Jia-Yush | Sensors | 67 | 60 | |
123 | 1997 | A trajectory feedback control for the computer disk filetrack-accessing/following servo | Yen, J.Y.; Tsai, S.Z.; YenJY | IEEE Transactions on Industrial Electronics | |||
124 | 2009 | Using MPCA of spectra model for fault detection in a hot strip mill | JIA-YUSH YEN | Journal of Materials Processing Technology | 10 | 9 | |
125 | 2008 | 工程設計教育與認證 | 顏家鈺 ; 劉曼君 | 評鑑雙月刊 | |||
126 | 2010 | 東南亞工程教育認證 | 顏家鈺 ; 劉曼君 | 評鑑雙月刊 |