研究成果


第 1 到 60 筆結果，共 60 筆。

公開日期標題作者來源出版物scopusWOS全文
12015On the use of energy method with element splitting to determine the stability of a constrained elasticaLee, C.-Y.; CHUNG-JEN LU ; JEN-SAN CHEN International Journal of Non-Linear Mechanics
22015Application of automatic balancers on a flexible-shaft rotor systemHsieh, H.-Y.; Lu, C.-J.; CHUNG-JEN LU 22nd International Congress on Sound and Vibration
32014Deformation and stability of a pinned shallow arch constrained by a rigid plate and loaded by a concentrated momentNAN-YOU LU ; CHUNG-JEN LU International Journal of Non-Linear Mechanics55
42014Equilibrium configurations of long rigid rotor and auto-balancer systemYu-Cheng Chang; Chung-Jen Lu; CHUNG-JEN LU The 21st International Congress on Sound and Vibration
52013Pure-Rotary Periodic Motions of Planar Auto-Balancer Systems by Harmonic Balance MethodHao-Wei Chen; Chung-Jen Lu; CHUNG-JEN LU 15th Asia Pacific Vibration Conference
62013長轉子自動平衡機構系統平衡解的解析解王明正; 張育誠; 盧中仁 中國機械工程學會第三十屆全國學術研討會
72012Pure-rotary periodic motions of a planar auto-balancer systemChung-Jen Lu; Y.-M. Tien; CHUNG-JEN LU Mechanical Systems and Signal Processing
82012平面滾珠平衡系統的旋轉期運動陳浩瑋; 盧中仁 中國機械工程學會第二十九屆全國學術研討會
92012長轉子雙滾珠自動平衡裝置週期解的參數分析徐穎; 盧中仁 第二十屆中華民國振動與噪音工程學術研討會
102012長轉子雙滾珠自動平衡裝置週期解的參數分析徐穎; 盧中仁 
112012離散Aldo模型在Barber條件下的熱彈分析黃致豪; 盧中仁 中國機械工程學會第二十九屆全國學術研討會
122012Comparison of One-Unit Ball-Rod-Spring Balancer with Traditional Ball-Type Automatic BalancerMing-Cheng Wang; Chung-Jen Lu; CHUNG-JEN LU The 4th International Conference on Mechanical and Electronics Engineering
132012Comparison of one-unit ball-rod-spring balancer with traditional ball-type automatic balancerWang, M.; Lu, C.; CHUNG-JEN LU Applied Mechanics and Materials
142012Pure-rotary periodic motions of a planar two-ball auto-balancer systemLu, C.-J.; Tien, M.-H.; CHUNG-JEN LU Mechanical Systems and Signal Processing
152011Stability analysis of a ball-rod-spring automatic balancerLu, Chung-Jen ; Wang, Ming-ChengInternational Journal of Mechanical Sciences96
162011滾珠平衡系統週期解的參數分析田孟軒; 盧中仁 第十九屆中華民國振動與噪音工程學術研討會
172011A modified incremental harmonic balance method for rotary periodic motionsLu, Chung-Jen ; Lin, Yu-MinNonlinear Dynamics1210
182010Periodic Solutions of a Rotor Equipped with a Ball-type Automatic BalancerLu, Chung-Jen; Lin, Yu-Min; CHUNG-JEN LU The joint 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics, Sydney, Aust
192009Analytical study of the stability of a two-ball automatic balancerLu, C.-J.; Wang, M.-C.; Huang, S.-H.; CHUNG-JEN LU Mechanical Systems and Signal Processing
202009滾珠自動平衡機構對剛性長轉子制振的理論與實驗分析王明正; 盧中仁 第十七屆中華民國振動與噪音工程學術研討會
212009Theoretical and Experimental Study of Ball-Type Automatic Balancer for Eccentric Rigid RotorsLu, Chung-Jen; Wang, Ming-Cheng; CHUNG-JEN LU The 16th International Congress on Sound and Vibration
222008基於隨機Cantor集表面模型的接觸熱阻分析盧中仁 
232008Stability Analysis of a Three-Ball Automatic BalancerLu, Chung-Jen ; Hung, Chia-HsingASME Journal of Vibration and Acoustics24
242008Stability Analysis of Ball-Type Automatic Balancer for Long Rigid RotorsMing-Cheng Wang; Chung-Jen Lu; CHUNG-JEN LU The 15th International Congress on Sound and Vibration
252008自動平衡機構應用於剛性長轉子之理論與實驗王明正; 盧中仁 第二十五屆中國機械工程全國學術研討會
262008Analytical study of the stability of a two-ball automatic balancerLu, Chung-Jen ; Wang, Ming-Cheng; Huang, Shih-HsuanMechanical Systems and Signal Processing, In Press 
272007配備滾珠型自動平衡裝置光碟機的全域動態分析盧中仁 
282007Dynamic Characteristics of a One-Unit Ball-Rod-Spring BalancerWang, Ming-Cheng; Lu, Chung-Jen ASME Journal of 
292007剛性長轉子兩端配置滾珠自動平衡機構之穩定性分析王明正; 盧中仁 第二十四屆中國機械工程全國學術研討會
302007Stability Analysis of a New Design of Ball-Type Automatic BalancerMing-Cheng Wang; Chung-Jen Lu; CHUNG-JEN LU The 12th Asia Pacific Vibration Conference
312006Stability Analysis of a Single-Ball Automatic BalancerLu, Chung-Jen ASME Journal of Vibration and Acoustics13
322006Stability Analysis of a Three-ball Automatic BalancerChung-Jen Lu; Chia-Hsing Hung; CHUNG-JEN LU The 13th International Congress on Sound and Vibration
332004Adaptive multilevel method for the air bearing problem in hard disk drivesLu, Chung-Jen ; Chiou, Shean-Son; Chiou, S.-S.; Wang, Tai-KuoTribology International10
342004New Designs of HDD Air-Lubricated Sliders via Topology OptimizationLu, Chung-Jen ; Wang, Tai-KuoASME Journal of Tribology
352004集中力矩作用下拱樑的動態行為–新型雙態微致動器的分析盧中仁 
362003基於隨機Cantor集表面模型的粗糙面彈塑性接觸分析盧中仁 
372003Coefficients of restitution based on a fractal surface modelLu, Chung-Jen ; Kuo, Ming-ChangASME Journal of Applied Mechanics16
382003On the Interface Diffusion Coefficient for Solving Reynolds Equation by Control Volume MethodLu, Chung-Jen ; Chiou, Shean-SonTribology International
392002基於碎形表面模型的接觸熱阻分析盧中仁 
402002Vibration analysis of an inhomogeneous string for damage detection by wavelet transformLu, Chung-Jen ; Hsu, Y.-T.International Journal of Mechanical Sciences47
412002Vibration analysis of an inhomogeneous string for damage detection by wavelets transformLu, Chung-Jen; Hsu, Y.-T.; CHUNG-JEN LU International Journal of Mechanical Sciences
422001表面加粗對磁碟機滑橇飛行特性的影響盧中仁 
432000基於碎形表面模型和熱彈性分析的接觸溫度研究盧中仁 
441999小波分析在非均質弦的破壞診斷上的應用盧中仁 
451999Simulations of flood and inundation affected by pumping-station and flood-gate operationsTeng, W.-H.; Hsu, M.-H.; CHUNG-JEN LU ; TSANG-JUNG CHANG WRPMD 1999: Preparing for the 21st Century00
461999輕量慣性量測系統之研發盧中仁 
471998基於碎形表面模型的恢復係數盧中仁 
481996新型直線式超音波馬達之研製盧中仁 
491995The effect of tip radius on nano-indentation hardness testsLu, Chung-Jen ; D. B. BogyInternational Journal of Solids and Structures
501995Nano-tribological investigations of carbon overcoats: Correlation with Raman spectraLu, Chung-Jen ; D. B. Bogy; Stephen S. Rosenblum; Glenn J. TessmerThin Solid Films26
511995Simultaneous measurement of surface topography and friction force by a single-head lateral force microscopeLu, C.-J.; Jiang, Z.; Bogy, D.B.; Miyamoto, T.; CHUNG-JEN LU Journal of Tribology
521995An investigation of the experimental conditions and characteristics of a nano-wear testJiang, Z.; Lu, C.-J.; Bogy, D.B.; Miyamoto, T.; CHUNG-JEN LU Wear
531995Dependence of nano-friction and nano-wear on loading force for sharp diamond tips sliding on Si, Mn-Zn ferrite, and AuJiang, Z.; Lu, C.-J.; Bogy, D.B.; Miyamoto, T.; CHUNG-JEN LU Journal of Tribology
541995Nanotribological Evaluations of Hydrogenated Carbon Films as Thin as 5 nm on Magnetic Rigid DisksJiang, Z.; Bogy, D.B.; Bhatia, C.S.; Miyamoto, T.; Lu, C.-J.; Bhatia, C.S.; CHUNG-JEN LU IEEE Transactions on Magnetics
551995Development of a new tip assembly for lateral force microscopy and its application to thin film magnetic mediaLu, C.-J.; Jiang, Z.; Bogy, D.B.; Miyamoto, T.; CHUNG-JEN LU Journal of Tribology
561995Nanotribological characterization of hydrogenated carbon films by scanning probe microscopyJiang, Z.; Lu, C.-J.; Bogy, D.B.; Bhatia, C.S.; Miyamoto, T.; CHUNG-JEN LU Thin Solid Films
571994The Influence of Thermal Defomation on the Contact Temperature of Seiding盧中仁 ; Bogy, D.; Lu, Chung-Jen ASME Journal of Applied Mechanics 
581994Nanoindentation hardness tests using a point contact microscopeLu, C.J.; Bogy, D.; Kaneko, R.; CHUNG-JEN LU Journal of Tribology
591992The influence of thermal deformation on the contact temperature of sliding asperitiesLu, C.-J.; Bogy, D.B.; CHUNG-JEN LU Journal of Applied Mechanics
601987Nano-Indentation Hardness Tests Using a Point Contact Microscope盧中仁 ; Bogy, D.; Lu, Chung-Jen ASME Journal of Tribology