第 1 到 61 筆結果,共 61 筆。

公開日期標題作者來源出版物scopusWOS全文
12023A Lower Limb Rehabilitation Assistance Training Robot System Driven by an Innovative Pneumatic Artificial Muscle SystemTsai, Tsung Chin; MAO-HSIUNG CHIANG Soft robotics55
22023Dynamic Co-Simulation Analysis and Control of an IEA 15 MW Offshore Floating Semi-Submersible Wind Turbine under Taiwan Offshore-Wind-Farm Conditions of Wind and WaveChueh, Cherng Jer; Chien, Chun Hung; Lin, Ching; Lin, Ting Yan; MAO-HSIUNG CHIANG Journal of Marine Science and Engineering10
32022Development of an Offshore Turbine Access System with Four-Axial Active Motion CompensationHuang, Guan Ying; Lin, Sheng Chia; MAO-HSIUNG CHIANG Proceedings of the 2022 8th International Conference on Applied System Innovation, ICASI 202210
42022Dynamic Simulation and Control of a Semi-submersible Floating Offshore Wind Turbine with a Direct-Driving Permanent Magnetic Synchronized GeneratorMAO-HSIUNG CHIANG ; Lin, Ching; Chien, Chun Hung; Kai-Tung (KT) Ma ; SHUN-HAN YANG ; Chen, Kuan Yu; Chueh, Cherng JerProceedings of the 2022 8th International Conference on Applied System Innovation, ICASI 202200
52021IMPLEMENTATION OF A THREE-AXIAL OFFSHORE TURBINE ACCESS SYSTEM WITH ACTIVE MOTION COMPENSATION USING FEEDBACK LINEARIZATION CONTROLLee, F. C.; Lin, S. C.; MAO-HSIUNG CHIANG Journal of Taiwan Society of Naval Architects and Marine Engineers0
62020Design and control of a 1-DOF robotic lower-limb system driven by novel single pneumatic artificial muscleTsai, T.-C.; Chiang, M.-H.; MAO-HSIUNG CHIANG Applied Sciences (Switzerland)1110
72019Simulation and experiment of a turbine access system with three-axial active motion compensationChen, B.-Y.; Chiang, M.-H.; MAO-HSIUNG CHIANG Ocean Engineering74
82019Development of a neural network model for soh of LiFePO4 batteries under different aging conditionsKuo, T.J.; Lee, K.Y.; Chiang, M.H.; MAO-HSIUNG CHIANG IOP Conference Series: Materials Science and Engineering30
92019Remote Sensing Image Registration Based on Modified SIFT and Feature Slope GroupingChang, Herng-Hua; Wu, Guan-Long; HERNG-HUA CHANG ; MAO-HSIUNG CHIANG Ieee Geoscience and Remote Sensing Letters039
102018Mathematical simulations and analyses of proportional electro-hydraulic brakes and anti-lock braking systems in motorcyclesChen, C.-P.; Chiang, M.-H.; MAO-HSIUNG CHIANG High-Throughput84
112018Development of proportional pressure control valve for hydraulic braking actuator of automobile ABSChen, C.-P.; Chiang, M.-H.; MAO-HSIUNG CHIANG Applied Sciences (Switzerland)146
122017Path Tracking Control for Single-Axial Dual Pneumatic Muscle ActuatorsChiang, M.-H.; Chen, Y.-N.; Chen, C.-P.; Chang, C.-W.; MAO-HSIUNG CHIANG Journal of the Chinese Society of Mechanical Engineers, Transactions of the Chinese Institute of Engineers, Series C0
132017Development of an Active-Controlled Side Stone Dumping System for Taiwan Offshore Wind Farms陳柏延(Bo-Yen Chen); 江茂雄(Mao-Hsiung Chiang); 陳義男(Yih-Nan Chen); 黃俊家(Chun-Chia Huang); MAO-HSIUNG CHIANG 中國機械工程學刊
142016A novel pitch control system of a large wind turbine using two-degree-of-freedom motion control with feedback linearization controlWang, C.-S.; Chiang, M.-H.; MAO-HSIUNG CHIANG Energies2320
152016Development of a PMSG-based Wind Turbine Modeling by ADAMS, FAST and MATLABWu, Y.-K.; Hu, Y.-L.; Chiang, M.-H.; MAO-HSIUNG CHIANG Energy Procedia20
162016The integration of the image sensor with a 3-DOF pneumatic parallel manipulatorLin, H.-T.; Chiang, M.-H.; MAO-HSIUNG CHIANG Sensors (Switzerland)63
172016A novel dynamic co-simulation analysis for overall closed loop operation control of a large wind turbineWang, C.-S.; Chiang, M.-H.; MAO-HSIUNG CHIANG Energies87
182016Tracking control of a magnetic shape memory actuator using an inverse preisach model with modified fuzzy sliding mode controlLin, J.-H.; Chiang, M.-H.; MAO-HSIUNG CHIANG Sensors (Switzerland)1010
192015Hysteresis analysis and positioning control for a magnetic shape memory actuatorLin, J.-H.; Chiang, M.-H.; MAO-HSIUNG CHIANG Sensors (Switzerland)88
202015Development of a DFIG-based wind turbine modelling by using ADAMS, FAST, and matlabWu, Y.-K.; Hu, Y.-L.; Chiang, M.-H.; MAO-HSIUNG CHIANG IET Seminar Digest0
212015Squat and standing motion of a single robotic leg using pneumatic artificial musclesLee, I.-F.; Lin, C.-I.; Wu, H.-C.; Wu, L.-C.; Lin, P.-C.; Chiang, M.-H.; PEI-CHUN LIN ; MAO-HSIUNG CHIANG ; WEN-PIN SHIH Journal of Applied Science and Engineering50
222014Adaptive fuzzy controller with self-tuning fuzzy sliding-mode compensation for position control of an electro-hydraulic displacement-controlled systemChiang, M.-H.; Lee, L.-W.; Liu, H.-H.; MAO-HSIUNG CHIANG Journal of Intelligent and Fuzzy Systems2118
232014A positioning actuator of magnetic shape memory alloys based on fuzzy sliding mode controlChiang, M.-H.; Lin, J.-H.; MAO-HSIUNG CHIANG IEEE International Conference on Control and Automation60
242014Feedback linearization control for a wind turbine driven by a variable-speed pump-controlled hydraulic servo systemChiang, M.-H.; Wang, C.-S.; Liu, J.; MAO-HSIUNG CHIANG IEEE International Conference on Control and Automation20
252013Simulation and control for load change process on a solid oxide fuel cellYu, D.-D.; Chiang, M.-H.; MAO-HSIUNG CHIANG Applied Mechanics and Materials10
262013Signed-distance fuzzy sliding mode position control for an energy-saving electro-hydraulic control systemChiang, M.-H.; Chen, C.-C.; Lee, L.-W.; Jiang, M.-C.; Lin, J.-H.; MAO-HSIUNG CHIANG Applied Mechanics and Materials10
272012The leveling position control of a four-axial active pneumatic isolation system using PWM-driving parallel dual-on/off valvesChiang, M.-H.; Lin, H.-T.; MAO-HSIUNG CHIANG Applied Mechanics and Materials10
282012Temperature control of solid oxide fuel cell using a reference model during load-tracking processChiang, M.-H.; Yu, D.-D.; MAO-HSIUNG CHIANG Advanced Science Letters00
292012Kinematic modeling of a 3-DOF translational parallel manipulatorChiang, M.-H.; Lin, H.-T.; MAO-HSIUNG CHIANG Advanced Science Letters10
302012Dynamic Simulation and Control Strategy Development for Safe and Fast Start-up on Solid Oxide Fuel CellChiang, Mao-Hsiung ; Yu, Dung-Di; Chen, Yih-NanThe Journal of the Chinese Society of Mechanical Engineers 
312012Intelligent Pitch Control for a 2MW Wind TurbineChiang, Mao-Hsiung ; Wang, Ching-Sung; Chen, Chang-ShengInternational Journal of Fuzzy Systems 
322012Intelligent position control of a variable rotational speed hydraulic pump-controlled systemChiang, M.-H.; Wu, B.-Y.; MAO-HSIUNG CHIANG Advanced Science Letters20
332011Development of a Stereo Vision Measurement System for a 3D Three-Axial Pneumatic Parallel Mechanism Robot ArmChiang, Mao-Hsiung ; Lin, Hao-Ting; MAO-HSIUNG CHIANG Sensors4133
342011A novel pitch control system for a wind turbine driven by a variable-speed pump-controlled hydraulic servo systemMAO-HSIUNG CHIANG Mechatronics10794
352011The velocity control of an electro-hydraulic displacement-controlled system using adaptive fuzzy controller with self-tuning fuzzy sliding mode compensationMAO-HSIUNG CHIANG Asian Journal of Control2016
362011The force control of a novel variable rotational speed hydraulic pump-controlled system using adaptive fuzzy controller with self-tuning fuzzy sliding-mode compensationChiang, M.-H.; Lin, H.-T.; MAO-HSIUNG CHIANG IFAC Proceedings Volumes100
372011Development of a 3D Parallel Mechanism Robot Arm with Three Vertical-Axial Pneumatic Actuators Combined with a Stereo Vision SystemMAO-HSIUNG CHIANG ; Lin, Hao TingSensors1916
382010固態氧化物燃料電池之起機模式模擬分析與控制江茂雄 ; 余冬帝
392010Development of X-Y Servo Pneumatic-Piezoelectric Hybrid Actuators for Position Control with High Response, Large Stroke and Nanometer AccuracyMAO-HSIUNG CHIANG Sensors2117
402010Development of three dimensional parallel mechanism robot with pneumatic systemChiang, M.-H.; Lin, H.-T.; MAO-HSIUNG CHIANG IFAC Proceedings Volumes00
412009Uninterrupted production of metal coils by making successive joints with roll bonding techniqueHuang, C.-C.; Chiang, M.-H.; Jeffrey Kuo, C.-F.; Chen, Y.-N.; Yeh, A.-C.; MAO-HSIUNG CHIANG Materials Transactions00
422009The high response and high efficiency velocity control of a hydraulic injection molding machine using a variable rotational speed electro-hydraulic pump-controlled systemChiang, M.-H.; Chen, C.-C.; Kuo, C.-F.J.; MAO-HSIUNG CHIANG International Journal of Advanced Manufacturing Technology5944
432009Protections against surface discoloration of nickel silver platesHuang, C.-C.; Jeffrey Kuo, C.-F.; Chiang, M.-H.; Yeh, A.-C.; MAO-HSIUNG CHIANG Materials Transactions11
442008氣壓平衡式7.5代平面顯示器玻璃基板升降系統設計分析及伺服定位控制之研究江茂雄 ; 陳偉杰; 謝宏村; 江友良
452008The High Response and High Efficiency Velocity Control of a Hydraulic Injection Moulding Machine Using a Variable Rotational Speed Electro-Hydraulic Pump-Controlled SystemChiang, Mao-Hsiung ; CHEN, Chung-Chieh; Kuo, Chung-Feng JeffreyInternational Journal of Advanced Manufacturing Technology 
462008現代光機電技術於先進汽車之應用江茂雄 
472008Velocity control for a variable displacement hydraulic servo system using adaptive fuzzy sliding-modChiang, M.-H.; Lee, L.-W.; Chen, C.-C.; Liu, H.-H.; MAO-HSIUNG CHIANG IFAC Proceedings Volumes (IFAC-PapersOnline)00
482007離岸型風力發電機葉片設計之研究-離岸型風力發電機葉片機電控制系統之研究 (新制多年期第1年)江茂雄 
492007高性能液壓伺服控制系統設計及CAE工程分析江茂雄 
502007固態氧化物燃料電池起機模式策略制定江茂雄 
512007以壓電致動器提昇傳統液壓伺服系統性能之研究江茂雄 
522007Adaptive fuzzy sliding-mode control for variable displacement hydraulic servo systemChiang, M.-H.; Lee, L.-W.; Liu, H.-H.; MAO-HSIUNG CHIANG IEEE International Conference on Fuzzy Systems50
532006Design and testing of a multi- electrode electro-rheological damperKuo, W.H.; Wu, T.N.; Guo, J.; 江茂雄 ; Chen, Y.N.Journal of Sound and Vibration 
542006Design and performance evaluation of a serial multi-electrode electrorheological damperKuo, W.-H.; Wu, T.-N.; Guo, J.; Chiang, M.-H.; JEN-HWA GUO ; MAO-HSIUNG CHIANG Journal of Sound and Vibration129
552005Large stroke and high precision pneumatic-piezoelectric hybrid positioning control using adaptive discrete variable structure controlChiang, M.-H.; Chen, C.-C.; Tsou, T.-N.; MAO-HSIUNG CHIANG Mechatronics5537
562005Integrated control of clamping force and energy-saving in hydraulic injection moulding machines using decoupling fuzzy sliding-mode controlChiang, M.H.; Yeh, Y.P.; Yang, F.L.; Chen, Y.N.; MAO-HSIUNG CHIANG International Journal of Advanced Manufacturing Technology4839
572005Development of a hydraulic-piezoelectric-actuator for hybrid positioning control with large stroke, high loading and sub-micrometer accuracyChiang, M.-H.; Lee, L.-W.; Huang, K.-S.; MAO-HSIUNG CHIANG 2005 IEEE International Conference on Mechatronics80
582004The concurrent implementation of high velocity control performance and high energy efficiency for hydraulic injection moulding machinesChiang, M.H.; Lee, L.W.; Tsai, J.J.; MAO-HSIUNG CHIANG International Journal of Advanced Manufacturing Technology1612
592004Experimental implementation of complex path tracking control for large robotic hydraulic excavatorsChiang, M.-H.; Huang, C.-C.; MAO-HSIUNG CHIANG International Journal of Advanced Manufacturing Technology3420
602003Parallel control velocity control and energy-saving control for a hydraulic valve-controlled cylinder system using self-organizing fuzzy sliding model controlChiang, M.-H.; Chien, Y.-W.; MAO-HSIUNG CHIANG JSME International Journal, Series C: Mechanical Systems, Machine Elements and Manufacturing2318
611993垂直負載電液伺服系統之加速度可變結構適應性模式追蹤控制陳義男; 李春伯; 江茂雄 國立臺灣大學工程學刊