Theoretical simulation and experimental confirmation of duty cycle effect on stroboscopic white light interferometry for M(O)EMS dynamic characterization
Journal
Journal of Micromechanics and Microengineering
Journal Volume
23
Journal Issue
11
Date Issued
2013
Author(s)
Abstract
Stroboscopic white light interferometry (SWLI) has been known as a useful measurement technique for vibrating samples such as micro-electro-mechanical systems (MEMS) or micro-opto-electro-mechanical systems (M(O)EMS) because it enables dynamic mode reconstruction and characterization of the tested system. An approximate model simulation without any experimental confirmation previously indicated that the duty cycle of the light could reduce the accuracy of the measurement. To provide a comprehensive insight into this important phenomenon, the study investigated theoretically and experimentally the effect of duty cycle of the light. An atomic force microscopy cantilever beam vibrating at its second resonant frequency was measured and the experimental measurements were analyzed and compared with the simulated results. In general, a reasonable correspondence between the mathematical model and the experimental measurements has been observed when the duty cycle is less than 15% and the average deviation is kept within 15.4% of the vibration amplitude. However, it is verified that the SWLI using white light LED has its physical detection limits when the cycle time of the strobed light or the light exposure time of the imaging device is more than 20%, in which the maximum measured error can significantly exceed 38.4% of the vibration amplitude.
SDGs
Type
journal article