Floorplan and Power/Ground Network Co-Synthesis
Date Issued
2004
Date
2004
Author(s)
Lin, Jung-Cheng
DOI
en-US
Abstract
In nanometer technology, the metal width is decreasing with the length increasing,
making the resistance along the power line increasing substantially. Thinner
wires with a lower supply voltage increase the possibility of functional failures
due to the excessive voltage (IR) drops. The voltage drop makes the supply voltage
at each gate no longer ideal. This e®ect weakens the driving capability of the gates,
increases the overall delay, and reduces the noise margin. Therefore, power distribution
analysis becomes a necessary step in ensuring the reliable operation of a design
at its intended speed. Further, the circuit sizes for high-end designs are typically
very large. The iteration cost for detecting and fixing such large-scale problems at
the end of the design flow is prohibitively high. Therefore, it is desired to develop an
e®ective methodology for design convergence. In this thesis, we present an e®ective
design methodology to integrate power/ground network analysis and floorplanning.
To make the integration feasible, we apply a very e±cient yet reasonably accurate
shortest-path modeling for power/ground analysis at the floorplanning stage. Experimental
results show that the voltage drop analysis at the floorplanning stage produces
no more than 8% error for real designs, compared to the HSPICE voltage drop
analysis. With the analysis, we can avoid the voltage drop error at the post-layout
verification stage to achieve the single-pass design methodology.
Subjects
平面規劃階段電源網路的同步合成
Floorplan and Power/Ground Network Co-Synthesis
Type
thesis
File(s)![Thumbnail Image]()
Loading...
Name
ntu-93-R91943080-1.pdf
Size
23.31 KB
Format
Adobe PDF
Checksum
(MD5):3d4b65838201a02494eff9781355d107