Model tests for studying the failure mechanism of dry granular soil slopes
Resource
Engineering Geology, 119(1-2), 51-63
Journal
Engineering Geology
Pages
51-63
Date Issued
2011
Date
2011
Author(s)
Abstract
The aim of this study is to investigate the behavior of sandy soil that has collapsed due to slope failures as well as to examine the influence area resulting from the failure. A model slope composed of three sections was employed to perform tests. The tests were conducted on various combinations of slope angle, slope height, slope surface condition, and the relative density of soil. Slope failure was induced by lifting up a retaining plate to cause the soil to collapse. Images of the sliding mass were taken by three cameras from different positions. The series of images clearly displayed the movement and development of granular flows. We then observed and measured the final profile of the soil and the shape of deposition area. The displacement of soil was measured by particle image velocimetry (PIV). Based on the measured displacement of flow, the front velocity of the flow was obtained. The slope angle and the internal friction angle of soil were found to be the most significant factors influencing the front velocity. Furthermore, a simplified equation based on Newton's law of motion is developed to predict the run-out of the flow. Comparison is then made between the measured and predicted run-out distances, and they are generally in good agreement. © 2011 Elsevier B.V.
SDGs
Type
journal article
File(s)![Thumbnail Image]()
Loading...
Name
140.pdf
Size
23.23 KB
Format
Adobe PDF
Checksum
(MD5):ca9060bffeb201b61e3756bf6300527a