Cyanophenol and benzyl phosphonic acid grafted electrodes for poly(butyl viologen) thin film-based electrochromic device
Journal
Solar Energy Materials and Solar Cells
Journal Volume
274
Start Page
112990
ISSN
0927-0248
Date Issued
2024-08-15
Author(s)
DOI
10.1016/j.solmat.2024.112990
Abstract
Viologens are considered among the most promising electrochromic materials for utilization in electrochromic devices (ECDs). In this regard, poly(butyl viologen) (PBV) has gained interest due to its stability, conductivity, and ease of synthesis, thus making it suitable for electrochromic applications. Regrettably, the poor adhesion of PBV thin film with substrates/electrodes deters the redox properties and long-term stability of PBV-based ECDs. To address this issue, herein, two types of surface-modified indium tin oxide (ITO) electrodes, grafted with 4-cyanophenol (P–CN-ITO) and benzyl phosphonic acid (BPO3-ITO), are introduced for the deployment in PBV-based ECDs. The optical contrast (ΔT, %) for substrate-modified P–CN and BPO3-based ECD was measured to be ∼57.0 and ∼59.5, respectively, which was remarkably higher (an improvement of ∼66 %) than that of ECD with bare ITO (∼34.3). Meanwhile, the coloration times (τc) of the P–CN, BPO3, and bare ITO-based ECD were registered to be ∼1.7, ∼2.0, and ∼4.1 s, respectively, thus revealing the superiority of utilized functional groups over the unmodified substrate. The P–CN and BPO3-based ECD retained ∼70.2 % and ∼55.5 % of initial ΔT, respectively, after continuous switching of 10,000 cycles, thus showing high endurance and reversibility. The XPS results indicated the strong covalent bond formation between the utilized functional groups (P–CN and BPO3) and ITO, which delivered improved electrochemical, optical, and stability behavior when deployed in ECDs. Our study suggests that P–CN and BPO3-based substrates can be promising for deployment as terminal electrodes in viologen-based ECDs for improved overall performance.
Subjects
4-Cyanophenol
Benzyl phosphonic acid
Electrochromic devices
Indium tin oxide (ITO)
Poly(butyl viologen)
Surface modification
SDGs
Publisher
Elsevier BV
Type
journal article