Removal of model organic precursors by coagulation
Journal
Practice Periodical of Hazardous, Toxic, and Radioactive Waste Management
Journal Volume
11
Journal Issue
1
Pages
69-76
Date Issued
2007
Author(s)
Abstract
Low-molecular-weight organics, i.e., phloroglucinol (P), resorcinol (R), and p-hydroxybenzoic acid (PHBA), were selected as the target compounds to evaluate their removal and precursor reduction efficiency by coagulation under the presence of high-molecular-weight compounds. The results of this investigation reveal that turbidity removal efficiencies can achieve 95% and above, but the total organic carbon removal for P, R, and PHBA are not remarkable, which are less than 20%. The chlorine demand after 168hour is: P≅PHBA>R>humic acids (HA)>tannic acid (TA); while the order of trihalomethanes (THM) formation is R>P>PHBA>HA>TA, which is strictly dependent upon the nature of the model compounds. By applying the developed dissolved organic carbon (DOC) removal model, both the maximum adsorption capacity and the residual DOC can be well predicted after coagulation. In this developed model, the adsorption capacity (a) is a function of the sorbable part of organic compounds (fsorbable), which can be expressed as: a=e2.67fsorbable, both shown in nature and synthetic water samples. The fnonsorb increased as the molecular weight (MW) of the target compounds decreased, suggesting that low-MW target compounds could not be easily adsorbed on the flocs.
SDGs
Type
journal article