Influence of Coloring Voltage on the Optical Performance and Cycling Stability of a Polyaniline-Indium Hexacyanoferrate Electrochromic System
Resource
Solar Energy Materials and Solar Cells 92 (2): 112-119
Journal
Solar Energy Materials and Solar Cells
Journal Volume
92
Journal Issue
2
Pages
112-119
Date Issued
2008
Date
2008
Author(s)
Abstract
An electrochromic system based on the multielectrochromic polyaniline (PANI) and pseudo-transparent indium hexacyanoferrate (InHCF) thin-film electrodes was studied in this work. In combination with a hybrid H+/K+-conducting solid polymer electrolyte-KCl-doped poly(2-acrylamido-2-methylpropanesulfonic acid) (K-PAMPS), a precoloring-free PANI-InHCF electrochromic device (ECD) with an active area of 3×3 cm2 was fabricated and exhibited yellowish-green-blue multicolor electrochromism. From in situ spectroelectrochemical experiments, we found that the performance of a PANI/K-PAMPS/InHCF ECD was significantly affected by the operating voltages, especially by the coloring voltage. Both the bleached and yellowish state of the ECD could be attained reversibly by applying a voltage ranging from +1.5 to +1.7 V (InHCF vs. PANI). Different coloring voltages resulted in different optical properties and cycling stabilities, however. For instance, the device biased at -1.6 V (InHCF vs. PANI) showed a deep blue color, but the optical activity decayed quickly (less than 50 cycles) when the device was switched between +1.6 and -1.6 V. Nevertheless, the device could be reversibly operated between +1.6 and 0 V for several hundred cycles, although a narrower electrochromic extent (yellowish-to-green) was observed correspondingly. The optimization of the coloring voltage is therefore of paramount importance to the PANI/K-PAMPS/InHCF ECD. © 2007 Elsevier B.V. All rights reserved.
Type
journal article
File(s)![Thumbnail Image]()
Loading...
Name
43.pdf
Size
343 KB
Format
Adobe PDF
Checksum
(MD5):7129371ac8842d7b43206d0f7a6a827b