Radiation suppression for cable-attached packages utilizing a compact embedded common-mode filter
Journal
IEEE Transactions on Components, Packaging and Manufacturing Technology
Journal Volume
2
Journal Issue
10
Pages
1696-1703
Date Issued
2012-10
Author(s)
Abstract
A compact and wideband common-mode filter is newly proposed to embed in a cable-attached printed circuit board (PCB) or packages for the suppression of the common-mode noise and its resulting electromagnetic interference (EMI) emission from the attached cable. The proposed filter consists of a pair of distributed signal lines on the top of a mushroom-like structure. Owing to its symmetry, an equivalent circuit model is developed and applied efficiently for this filter design. As an example, a filter prototype is designed and fabricated on a multilayer PCB. The filter prototype shows that it can greatly reduce the common-mode noise over 10 dB from 1.65 to 5.2 GHz. In addition, the corresponding fractional bandwidth is over 100% while the electrical size of the prototype is only 0.11×0.11 λ g, where λ g is the wavelength of the central frequency of its stopband. Also in the time domain, this filter prototype can reduce over 60% of the unintended noise. More importantly, the differential-signal integrity, in terms of the insertion loss in the frequency domain and the eye diagram in the time domain, is maintained up to 7 GHz. To the best of our knowledge, it is the first embedded common-mode filter proposed for gigahertz differential signals with such a large bandwidth and the most compact size. To further demonstrate the ability of the filter to suppress the common-mode current on the attached cable and the corresponding EMI emission, a test board design is also introduced and realized. From the experimental results related to this test board, a 10-dB suppression on average is indeed achieved. © 2011-2012 IEEE.
SDGs
Type
journal article