Improved estimation of residual capacity of batteries for electric vehicles
Journal
Journal of the Chinese Institute of Engineers, Series A/Chung-kuo Kung Ch'eng Hsuch K'an
Journal Volume
31
Journal Issue
2
Pages
313-322
Date Issued
2008
Author(s)
Abstract
This paper proposes an improved means of estimation for the residual capacity of lead-acid batteries used in electric vehicles. The residual capacity of batteries in commercial products is usually indicated by the state of charge (SOC) of the battery set, in terms of the measurement of amp-hours, or roughly an instant voltage. More practical and accurate SOC in the operation of electric vehicles must consider the original capacity when the battery is first installed, capacity deficiency due to high discharge rate, capacity dissipated in internal resistance, and correcting parameters for the battery aging process. The proposed estimation techniques include the amp-hours measurement weighted by a correction function of various discharge rates, the transient open-circuit voltage measurement to compensate for the energy dissipation from internal resistance, and the reset of parameters in the linear function of SOC and open-circuit voltage for the aging effect. A monitoring circuit with a programmable logic chip is implemented, and the experimental results show that a more accurate indication of SOC is achieved using the modified estimation techniques, namely a weighted ampere-hour measurement with transient open-circuit voltage combined with the aging effect. © 2008, Taylor & Francis Group, LLC.
SDGs
Type
journal article