PZT thin film pressure sensor for on-line monitoring injection molding
Journal
IECON Proceedings (Industrial Electronics Conference)
Journal Volume
1
Pages
2394-2399
Date Issued
2000
Author(s)
Chen, C.M.
Abstract
In this paper, a new fabrication process for lead zirconate titanate (PbZrTiO/sub 3/, PZT) micro pressure sensor is presented. The PZT pressure sensor can be applied to on-line monitoring of the pressure in the mold's core and cavity during the injection process. This PZT piezoelectric thin film sensor is deposited on the surface of steel wafer at 300/spl deg/C by RF sputtering process and is micro fabricated directly. The composition of the steel wafer is similar to the injection mold used in most injection machines. After the sputter deposition, rapid or slow thermal annealing treatment is proceeded at 650/spl deg/C. Rapid thermal annealing will attain better ferroelectric property and better perovskite crystal structure of PZT thin films. However, rapid thermal annealing can cause film cracks. This research developed multilayer PZT thin film techniques, which can reduce the effect of film cracks. The properties of the proposed PZT thin film pressure sensor are: the remnant polarization (P/sub r/), coercive field (E/sub c/), and relative dielectric constant (/spl epsi//sub s/) of the PZT films are 10.41 C/cm/sup 2/, 79.2 kV/cm and 1535, respectively; the piezoelectric constant d/sub 33/ and d/sub 31/ are estimated to be 129.9 pc/N and -48.03 pc/N, respectively.
SDGs
Type
conference paper