Effect of radial hydrides on the axial and hoop mechanical properties of Zircaloy-4 cladding
Journal
Journal of Nuclear Materials
Journal Volume
362
Journal Issue
1
Pages
93-103
Date Issued
2007
Author(s)
Chu, H.C.
Abstract
The effect of radial hydrides on the mechanical properties of stress-relief annealed Zircaloy-4 cladding was studied. Specimens were firstly hydrided to different target hydrogen levels between 100 and 600 wt ppm and then thermally cycled in an autoclave under a constant hoop stress to form radial hydrides by a hydride reorientation process. The effect of radial hydrides on the axial properties of the cladding was insignificant. On the other hand, the cladding ductility measurements decreased as its radial hydride content increased when the specimen was tested in plane strain tension. A reference hydrogen concentration for radial hydrides in the cladding was defined for assessing the fuel cladding integrity based on a criterion of the tensile strength 600 MPa. The reference hydrogen concentration increased with the specimen (bulk) hydrogen concentration to a maximum of ∼90 wt ppm at the bulk concentration ∼300 wt ppm H and then decreased towards higher concentrations. © 2006 Elsevier B.V. All rights reserved.
Type
journal article