A 3.1-dB NF, 21.31 dB gain micromachined 3-10 GHz distributed amplifier for UWB systems in 0.18-μm CMOS technology
Journal
Microwave and Optical Technology Letters
Journal Volume
54
Journal Issue
5
Pages
1163-1167
Date Issued
2012
Author(s)
Abstract
A high-gain and low-noise micromachined CMOS distributed amplifier (DA) using cascaded gain cell, which constitutes an inductively parallel-peaking cascode-stage with a low-Q RLC load and an inductively series-peaking common-source stage, is demonstrated.Flat and high S 21 and flat and low noise figure (NF) are achieved simultaneously by adopting a slightly under-damped Q-factor for the second-order transconductance frequency response of the proposed cascaded gain cell. The two-stage DA consumes 37.8 mW and achieves flat and high S 21 of 20.47 ± 0.72 dB with an average NF of only 3.3 dB over the 3∼10 GHz band of interest, one of the best reported NF performances for a CMOS UWB DA or LNA in the literature. In addition, the result shows that a 0.84-dB increase in average S 21 (from 20.47 to 21.31 dB) and a 0.2-dB decrease (from 3.3 to 3.1 dB) in average NF are achieved mainly due to the improvement of the quality factor of the inductors in the DA. This means that this DA architecture in conjunction with the backside ICP dry-etching technique is very promising for high-performance 3∼10 GHz UWB communication systems. © 2012 Wiley Periodicals, Inc.
SDGs
Type
journal article