dc.relation.reference | 1. Fujimoto, T., Nishiyama, I. and Mukai, A. (1997), “Test results of CFT beam-column connection”, U.S.-Japan Cooperative Earthquake Research Program: Composite and Hybrid Structures, 4th JTCC, Oct.12-14.
2. Youssef, N.F.G., Bonowitz, D. and Gross, J.L. (1995), “A survey of steel moment-resisting frame buildings affected by the 1994 Northridge Earthquake”, Report No.: NISTIR 5625, National Institute of Standards and Technology, Gaithersburg, Md.
3. Popov, E.P., Yang, T.S. and Chang, S.P. (1998), “Design of MRF Connections before and after 1994 Northridge Earthquake”, Engineering Structures, Volume 20, Issue 12, Pages 1030-1038.
4. Nakashima, M., Inoue, K., and Tada, M. (1998), “Classification of damage to steel buildings observed in the 1995 Hyogoken-Nanbu earthquake”, Engineering Structures, Volume 20, Issue 4-6, Pages 271-281.
5. Watanabe, E., Sugiura, K., Nagata, K., and Kitane, Y. (1998), “Performances and damages to steel structures during the 1995 Hyogoken-Nanbu earthquake”, Engineering Structures, Volume 20, Issue 4-6, Pages 282-290.
6. Azizinamini A. and Shekar Y., (1995), “Design of through beam connection detail for circular composite columns”, Engineering Structures, Volume 17, Pages 209–31.
7. Fujimoto T, Inai E, Tokinoya H, Kai M, Mori K, Mori O et al. Behavior of beam-column connection of CFT Column system under seismic force. In: Proceeding of the 6th international conference on steel–concrete composite structure.
8. Kang CH, Shin KJ, Oh YS, Moon TS. Hysteresis behavior of CFT column to H-beam connections with external T-stiffeners and penetrated elements. Engineering Structure 2001;23(9):1194–201.
9. Elremaily A, Azizinamini A. Design provision for connections between steel beam and concrete filled tube column. Journal of Constructional Steel Research 2001;57:971–95.
10. Shin KJ, Kim YJ, Oh YS, Moon TS. Behavior of welded CFT column to H-beam connections with external stiffeners. Engineering Structure 2004; 26(11):1877–87.
11. Sherbourne, A.N. and Bahaari, M.R., (1994), “3D simulation of end-plate bolted connections”, Journal of Structural Engineering, 120(11), 3122-3136.
12. Bahaari, M.R. and Sherbourne, A.N., (1996), “Structural behavior of end-plate bolted connections to stiffened columns”, Journal of Structural Engineering, 122(8), 926-935.
13. Popov, E.P. and Takhirov, S.M., (2002), “Bolted large seismic steel beam-column connections Part 1: experimental study”, Engineering Structure, 24(12), 1523-1534.
14. Popov, E.P. and Takhirov, S.M., (2002), “Bolted large seismic steel beam-column connections Part 2: numerical nonlinear analysis”, Engineering Structure, 24(12), 1535-1545.
15. Braconi1, A., Salvatore, W., Tremblay, R. and Bursi, O. S., (2007), “Behaviour and modelling of partial-strength beam-to-column composite joints for seismic applications”, Earthquake Engineering and Structural Dynamics, 36(1), 142-161.
16. Chung, L. L., Wu, L.Y., Huang, G. L., Lu, C.F. and Huang, D. H. (2004), “Experimental Study on Design Parameters of Bi-directional Bolted Beam-column Connections for Concrete-filled-tube Structures”, Report No.: NCREE 04-002, National Center for Research on Earthquake Engineering.
17. Wu, L.Y., Chung, L.L., Tsai, S.F., Shen, T.J. and Huang, G.L. (2005), “Seismic Behavior of Bolted Beam-column Connections for Concrete Filled Steel Tube”, Journal of Constructional Steel Research, 61(10), 1387-1410.
18. Wu, L.Y., Chung, L.L., Tsai, S.F., Lu, C.F. and Huang, G.L. (2007), “Seismic Behavior of Bidirectional Bolted Connections for CFT Columns and H-Beams”, Engineering Structures, Volume 29, Issue 3, Pages 395-407.
19. Chung, L.L., Wu, L.Y., Huang, D.H., Huang, G.L. and Chen, J.C. (2005), “Analytical and Experimental Study on Bolted Beam-Column Connection for Circular Concrete-Filled Tubular Structures”, Report No.: NCREE 05-013, National Center for Research on Earthquake Engineering.
20. Chung, L.L., Wu, L.Y., Huang, D.H., Huang, G.L. and Chen, J.C. (2005), “Analytical and Experimental Study on Beam-Column Connection with Buckling Restrained Braces for Circular Concrete-Filled Tubular Structures”, Report No.: NCREE 05-009, National Center for Research on Earthquake Engineering.
21. Richart, F.E., Brandtzaeg, A., and Brown, R.L. (1928), “A Study of the Failure of Concrete Under Combined Compressive Stresses,” Engineering Experimental Station, University of Illinois, Bulletin No. 185,.
22. Chen, C.C., Lin, C.C., and Lin, C.H. (2006), “Ductile moment connections used in steel column-tree moment-resisting frames”, Journal of Constructional Steel Research, Vol. 62, Issue 8, pp. 793–801.
23. Xiao, Y., Mao W., Anderson, J.C., Wu, Y. (2004), “Improved seismic design using bolted end-plate connections for steel reinforced concrete composite structures”, Proceedings of the Third International Conference on Earthquake Engineering, October 18-20, 2004, Nanjing, China, Paper No. ch3_06.
24. FEMA (2000), “Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings”, FEMA 350, Federal Emergency Management Agency, Washington, DC.
25. AISC, (2005), “ANSI/AISC 341-05 & 341s1-05 Seismic Provisions for Structural Steel Buildings”, Including Supplement No. 1. American Institute of Steel Construction, Inc.: Chicago, IL.
26. AISC and AISI. Standard Definitions for Use in the Design of Steel Structures, 2004 Edition. American Institute of Steel Construction, Inc.: Chicago, IL, American Iron and Steel Institute, Inc.: Washington, DC, Pub. No. AISC 121-05, 2005.
27. AISC. Manual of Steel Construction – LRFD, Third Edition. American Institute of Steel Construction, Inc.: Chicago, IL, 2001.
28. ASCE Task Committee on Concrete and Masonry Structure (1982), State of the Art Report on Finite Element Analysis of Reinforced Concrete, ASCE, New York.
29. ACI Committee 318 (1999), Building Code Requirements for Structural Concrete and Commentary (ACI 318-99), American Concrete Institute, Detroit, Michigan.
30. Hu, H. T., Huang, C. S., and Chen, Z. L. (2005), “Finite element analysis of CFT columns subjected to an axial compressive force and bending moment in combination”, Journal of Constructional Steel Research, 61(12), 1692-1712.
31. Mander, J. B., Priestly, M. J. N. and Park, R. (1988), “Theoretical Stress-strain Model for Confined Concrete”, Journal of Structural Engineering, Vol. 114, No. 8, August, pp. 1804-1823.
32. Liu G.Y., Yeh Y.K., Tsai K.C., Su S.C., Sun W.L. (2003) A Study on the behaviors of concrete-filled steel tubular beam–columns subjected to axial load and bending moment, technical report NCREE-03-009, Taipei (Taiwan, ROC); National Center for Research on Earthquake Engineering[in Chinese].
33. British Standards Institute. (1994) Design of Composite Steel and Concrete Structure, Eurocode 4. London.
34. Wu, M.-H. (2000), Numerical Analysis of Concrete Filled Steel Tubes Subjected to Axial Force, M.S. Thesis, Department of Civil Engineering, National Cheng Kung University, Tainan, Taiwan, R.O.C.
35. Hu, H.-T., and Schnobrich, W. C. (1989), “Constitutive Modelling of Concrete by Using Nonassociated Plasticity,” Journal of Materials in Civil Engineering, ASCE, Vol. 1, No. 4, 199-216.
36. Priestley, M. J. N., E. Seible, G. M. Calvi. (1996) Seismic Design and Retrofit of Bridges. John Wiley & Sons. New York.
37. HKS.ABAQUS User’s Manual Version 6.5 (2005) Hibbitt, Karlsson & Sorensen, Inc., Pawtucket, RI. | en |