DC 欄位 | 值 | 語言 |
dc.contributor | 蔡克銓 | zh-TW |
dc.contributor | 臺灣大學:土木工程學研究所 | zh-TW |
dc.contributor.author | 鄭敬生 | zh-TW |
dc.contributor.author | Chiang, Keng-Sang | en |
dc.creator | 鄭敬生 | zh-TW |
dc.creator | Chiang, Keng-Sang | en |
dc.date | 2008 | en |
dc.date.accessioned | 2010-06-30T15:54:37Z | - |
dc.date.accessioned | 2018-07-09T19:40:33Z | - |
dc.date.available | 2010-06-30T15:54:37Z | - |
dc.date.available | 2018-07-09T19:40:33Z | - |
dc.date.issued | 2008 | - |
dc.identifier.other | U0001-2507200823330200 | en |
dc.identifier.uri | http://ntur.lib.ntu.edu.tw//handle/246246/187623 | - |
dc.description.abstract | 鋼板剪力牆是一較新型的抗側力系統。當薄鋼板發生剪力挫屈後,會產生拉力場行為,拉力場的形成可維持該系統後挫屈階段的勁度與強度,而鋼板能藉着反覆拉力場行為來消散外力所輸入的能量。本研究首先對三座鋼板剪力牆系統進行有限元素分析,透過有限元素細緻的網格劃分來探討結構進入非線性期間的行為,同時又與試驗結果進行強度與勁度之比對。由於有限元素分析較耗時,為了讓鋼板剪力牆系統得以推廣,一種適合工程界使用的簡化模型顯得相當重要,本研究對目前最常使用的板條與等效斜撐模型的適用性進行探討,並對兩種模型加以修正,而提出了三種修正模型,其名稱分別為修正板條模型、修正等效斜撐模型與修正牆板與構架互制模型,研究結果顯示三種修正模型能有效地提升分析的精確性。本研究依據不同的鋼板拉力場角度進行分析,發現拉力場角度對分析結果影響小,且若周圍梁柱的容量充足時,其影響程度更低。含連接梁的鋼板剪力牆能透過連接梁的連接,使該系統內柱的柱軸力有效地降低。本研究透過PISA3D及ABAQUS分析軟體的協助,証實連接梁可設計成剪力連桿或彎矩連桿,對鋼板剪力牆系統提供額外的消能機制。本研究建議含連接梁鋼板剪力牆之設計只需額外考慮連接梁的作用,其設計方法可依據一般型鋼板剪力牆系統加以適度調整。 | zh-TW |
dc.description.abstract | Steel plate shear wall (SPSW) has evolved into an effective lateral force resisting system. After the shear buckling of the thin plate, tension field action can be developed. Thus, the lateral stiffness and strength can be maintained in the post-buckling range, the input energy can be effectively dissipated through the cyclic tension field actions. This research firstly conducts analytical investigations using finite element models for three test specimens. Using rather refined meshes, this paper demonstrates the structural performance of the boundary beams and columns when the steel panels buckled and the tension field action developed during the nonlinear stage. Then, this research investigates the lateral stiffness and strength between the test and the analytical results. Since detailed finite element models may be inconvenient to construct, it become a must to develop a simplified but accurate model for practical use. Thus, the two commonly used models: strip model and equivalent brace model are extensively studied in this research. It is found that these two models often underestimate the stiffness and strength, of a SPSW. This research further develops three refined models, entitled: refined strip model, refined EB model and refined PFI model. Analytical results show that refined models can effectively improve the accuracy. In addition, by varying the tension field angle in the analytical models, it is found that the changes of tension field angle have little effect on the responses of the SPSW especially when the boundary members are sufficiently stiff. Steel plate shear walls coupled with link beams (CSPSW) can be an effective structural configuration. The axial force demand on the inner columns can be reduced by effective coupling beams. Using extensive PISA3D and ABAQUS analyses, it is confirmed that the coupling beams can be designed as shear or flexural links. It can provide additional energy dissipation capacity. This research concludes that the design procedures for the SPSW can be conveniently modified before applications for CSPSWs. | en |
dc.description.tableofcontents | 口試委員會審定書 i謝 ii要 iiiBSTRACT iv錄 v目錄 x目錄 xi一章 介紹 1.1. 前言 1.2. 研究動機 1.2.1. 鋼板剪力牆分析模型 1.2.2. 含連接梁鋼板剪力牆系統 2.3. 研究內容 3.3.1. 鋼板剪力牆分析模型 3.3.2. 含連接梁鋼板剪力牆系統 4二章 鋼板剪力牆之相關研究 5.1. 簡介 5.2. 基本原理 5.2.1. 鋼板挫屈行為 5.2.2. 鋼板後挫屈行為 5.2.3. 鋼板拉力場角度 6.3. 單向側推與反覆載重試驗 8.3.1. 單層鋼板剪力牆試驗 8.3.2. 多層鋼板剪力牆試驗 11.4. 分析模型 14.5. 梁柱容量設計方法 18.5.1. 簡介 18.5.2. 鋼板拉力場對梁柱造成之均佈荷載 18.5.3. 梁構件之軸力 19.5.4. 頂梁與底梁之容量設計 19.5.5. 中間梁之容量設計 20.5.6. 柱之容量設計 21.6. 塑性設計 22.7. 耐震設計流程 23.8. 各國設計規範 24.8.1. 加拿大設計規範 24.8.2. 美國設計規範 25三章 鋼板剪力牆有限元素分析 27.1. 簡介 27.2. 有限元素分析軟體 27.3. 低寬型鋼板剪力牆 28.3.1. 試體介紹 28.3.2. 試驗結果 29.3.3. 幾何模型 30.3.4. 材料設定 30.3.5. 網格劃分 31.3.6. 邊界條件 32.3.7. 施載方式 33.3.8. 分析方法 33.3.9. 分析結果 34.4. 高窄型鋼板剪力牆 35.4.1. 試體介紹 35.4.2. 試驗結果 36.4.3. 模擬過程 37.4.4. 分析結果 38四章 鋼板剪力牆簡化模型之研究 41.1. 簡介 41.2. 簡化模型之選用 42.2.1. 模型介紹 42.2.2. 分析方法 43.2.3. 分析結果 43.2.4. 討論與建議 45.3. 簡化模型之修正 46.3.1. 低寬型鋼板剪力牆 46.3.1.1. 試體介紹 46.3.1.2. 材料設定 46.3.1.3. 梁柱交會區模擬 47.3.1.4. 柱腳模擬 48.3.1.5. 梁翼切削斷面模擬 48.3.1.6. 鋼板拉力場角度 49.3.1.7. 鋼板牆模擬 49.3.1.8. 分析方法 54.3.1.9. 分析結果 55.3.2. 高窄型鋼板剪力牆 56.3.2.1. 試體介紹 56.3.2.2. 模擬過程 57.3.2.3. 分析方法 58.3.2.4. 分析結果 59.4. 鋼板拉力場角度之影響 61.4.1. 拉力場角度之計算 61.4.2. 拉力場角度對強度之影響 62.4.3. 拉力場角度對勁度之影響 62五章 含連接梁鋼板剪力牆之設計與分析 64.1. 簡介 64.2. 單層含連接梁鋼板剪力牆 64.2.1. 模型介紹 64.2.2. 分析方法 65.2.3. 分析結果 65.3. 雙層含連接梁鋼板剪力牆 66.3.1. 模型介紹 66.3.2. 分析方法與結果 67.4. 容量設計概念 68.5. 容量設計方法 69.5.1. 鋼板牆 70.5.2. 頂梁 71.5.3. 中間梁 71.5.4. 連接梁 72.5.5. 一樓外柱 72.5.6. 其他樓層外柱 74.5.7. 一樓內柱 74.5.8. 其他樓層內柱 75.6. 耐震設計流程 75.7. 設計例 76.7.1. 結構概述 76.7.2. PISA3D彈性分析 77.7.3. PISA3D非線性側推分析 78.7.4. ABAQUS非線性側推分析 79六章 結論與建議 82.1. 結論 82.2. 建議 84七章 參考文獻 85 | en |
dc.format.extent | 11484863 bytes | - |
dc.format.mimetype | application/pdf | - |
dc.language | zh-TW | en |
dc.language.iso | en_US | - |
dc.subject | 鋼板剪力牆 | zh-TW |
dc.subject | 拉力場 | zh-TW |
dc.subject | 有限元素分析 | zh-TW |
dc.subject | 分析模型 | zh-TW |
dc.subject | 連接梁 | zh-TW |
dc.subject | 容量設計 | zh-TW |
dc.subject | steel plate shear wall | en |
dc.subject | tension field | en |
dc.subject | finite element analysis | en |
dc.subject | analytical model | en |
dc.subject | coupling beam | en |
dc.subject | capacity design | en |
dc.title | 鋼板剪力牆耐震分析與設計之研究 | zh-TW |
dc.title | Seismic Analysis and Design of Steel Plate Shear Walls | en |
dc.type | thesis | en |
dc.identifier.uri.fulltext | http://ntur.lib.ntu.edu.tw/bitstream/246246/187623/1/ntu-97-R95521213-1.pdf | - |
item.fulltext | with fulltext | - |
item.openairetype | thesis | - |
item.languageiso639-1 | en_US | - |
item.openairecristype | http://purl.org/coar/resource_type/c_46ec | - |
item.grantfulltext | open | - |
item.cerifentitytype | Publications | - |
顯示於: | 土木工程學系
|