Structural control and properties of low-dielectric-constant poly(hydrogen silsesquioxane) precursors and their thin films
Journal
Journal of Applied Polymer Science
Journal Volume
91
Journal Issue
4
Pages
2653-2660
Date Issued
2004
Author(s)
Abstract
The precursors of poly(hydrogen silsesquioxane) (PHSSQ) were synthesized from triethoxysilane (TES) through variations in the pH and molar ratio of water to TES (R1). The molecular structures of the prepared PHSSQ precursors were controlled by the reaction conditions, including the molecular weight, the content of Si-OH end groups, and the cage/network ratio. The effect of the reaction conditions on the PHSSQ structure was quite different from that previously reported for poly(methyl silsesquioxane) (PMSSQ). The Si-OH content and cage/network ratio of the prepared PHSSQ precursors increased with increasing R1 and pH. The molecular weight of the prepared PHSSQ precursors first increased with increasing R1 or pH and then decreased at high values of R1. These results were explained by the effects of R1 and pH on the hydrolysis and condensation reactions. The cage/network ratio of the prepared PHSSQ films decreased with increasing curing temperatures and resulted in an increasing refractive index or dielectric constant. The steric effect from the side groups yielded PMSSQ films that had a smaller refractive index or dielectric constant than the PHSSQ precursors. PHSSQ films have potential applications as low-dielectric-constant materials.
SDGs
Type
journal article