Thin-gate oxides prepared by pure water anodization followed by rapid thermal densification
Journal
IEEE Electron Device Letters
Journal Volume
17
Journal Issue
12
Pages
575-577
Date Issued
1996
Author(s)
Abstract
Anodic oxidation at room temperature with pure deionized water as electrolyte and then followed by high-temperature rapid thermal densification was used to prepare high breakdown endurance thin-gate oxides with thicknesses of about 50 /spl Aring/. It was observed that the oxides prepared by anodic oxidation followed by rapid thermal densification (AOD) show better electrical characteristics than those grown by rapid thermal oxidation (RTO) only. The AOD oxides have a very low midgap interface trap density, Ditm, of smaller than 1/spl times/10/sup 10/ eV/sup -1/ cm/sup -2/ and negative effective oxide trapped charge. From the smaller leakage currents observed during staircase ramp voltage time-zero dielectric breakdown (TZDB) and constant field time-dependent dielectric breakdown (TDDB) testings, it is supposed that the uniform interfacial property and the pretrapped negative charges in AOD oxides are responsible for the improved characteristics.
SDGs
Type
journal article