Full color light-emitting electrospun nanofibers prepared from PFO/MEH-PPV/PMMA ternary blends
Journal
Journal of Polymer Science, Part B: Polymer Physics
Journal Volume
47
Journal Issue
5
Pages
463-470
Date Issued
2009
Author(s)
Abstract
In this study, luminescence electrospun (ES) nanofibers based on ternary blends of poly(9,9-dioctylfluoreny-2,7-diyl) (PFO)/poly[2-methoxy-5-(2- ethylhexyloxy)- 1,4-phenylenevinylene] (MEH-PPV)/poly(methyl methacrylate) (PMMA) were prepared from chloroform solutions using a single capillary spinneret. Effects of PFO/ MEH-PPV ratio on the morphology and photophysical properties were studied while the PMMA weight percentage was fixed at 90 wt %. The morphologies of the prepared ES fibers were characterized by FE-SEM and fluorescence microscopy. The obtained fibers had diameters around a few hundred nm and pore sizes in the range of 30-35 nm. The emission colors of the PFO/MEH-PPV/PMMA blend ES fibers changed from blue, white, yellowish-green, greenish-yellow, orange, to yellow, as the MEH-PPV composition increased. In contrast, the emission colors of the corresponding spin-coated films were blue, orange, pink-red, red, and deep-red. Based on the values of solubility parameters, the PFO and MEH-PPV are miscible to each other and trapped in the PMMA matrix. Hence, energy transfer between these two polymers is possible. The smaller aggregated domains in the ES fiber compared to those of spin-coated films possibly reduce the efficiency of energy transfer, leading to different emission colors. Also, the prepared ES fibers had higher photoluminescence efficiencies than those of the spin-coated films. Pure white light-emitting fibers prepared from the PFO/MEH-PPV/ PMMA blend ratio of 9.5/0.5/90 had the Commission Internationale de L'Eclairage (CIE) coordinate of (0.33, 0.31). Our results showed that different color light-emitting ES fibers were produced through optimizing the composition of semiconducting polymer in the transparent polymer matrix. This type of ES fibers could have potential applications as new light sources or sensory materials for smart textiles. © 2009 Wiley Periodicals, Inc.
SDGs
Type
journal article