https://scholars.lib.ntu.edu.tw/handle/123456789/409108
標題: | "sensArray" voltage sensor analysis in an inductively coupled plasma | 作者: | Titus M.J. Hsu C.C. Graves D.B. |
公開日期: | 2010 | 卷: | 28 | 期: | 1 | 起(迄)頁: | 139-146 | 來源出版物: | Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films | 摘要: | A commercially manufactured PlasmaVoltTM sensor wafer was studied in an inductively coupled plasma reactor in an effort to validate sensor measurements. A pure Ar plasma at various powers (25-420 W), for a range of pressures (10-80 mT), and bias voltages (0-250 V) was utilized. A numerical sheath simulation was simultaneously developed in order to interpret experimental results. It was found that PlasmaVoltTM sensor measurements are proportional to the rf-current through the sheath. Under conditions such that the sheath impedance is dominantly capacitive, sensor measurements follow a scaling law derived from the inhomogeneous sheath model of Lieberman and Lichtenberg, [Principles of Plasma Discharges and Materials Processing (Wiley, New York, 2005)]. Under these conditions, sensor measurements are proportional to the square root of the plasma density at the plasma-sheath interface, the one-fourth root of the electron temperature, and the one-fourth root of the rf bias voltage. When the sheath impedance becomes increasingly resistive, the sensor measurements deviate from the scaling law and tend to be directly proportional to the plasma density. The measurements and numerical sheath simulation demonstrate the scaling behavior as a function of changing sheath impedance for various plasma conditions. ? 2010 American Vacuum Society. |
URI: | https://scholars.lib.ntu.edu.tw/handle/123456789/409108 | ISSN: | 07342101 | DOI: | 10.1116/1.3268615 |
顯示於: | 化學工程學系 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。