https://scholars.lib.ntu.edu.tw/handle/123456789/409879
標題: | Solventless adhesive bonding using reactive polymer coatings | 作者: | Chen H.-Y. McClelland A.A. Chen Z. Lahann J. |
公開日期: | 2008 | 卷: | 80 | 期: | 11 | 起(迄)頁: | 4119-4124 | 來源出版物: | Analytical Chemistry | 摘要: | A novel solventless adhesive bonding (SAB) process is reported, which is applicable to a wide range of materials including, but not limited to, poly(dimethylsiloxane) (PDMS). The bonding is achieved through reactions between two complementary polymer coatings, poly(4-aminomethyl-p-xylylene-co-p- xylylene) and poly(4-formyl-p-xylylene-co-p-xylylene), which are prepared by chemical vapor deposition (CVD) polymerization of the corresponding [2.2]paracyclophanes and can be deposited on complementary microfluidic units to be bonded. These CVD-based polymer films form well-adherent coatings on a range of different substrate materials including polymers, glass, silicon, metals, or paper and can be stored for extended periods prior to bonding without losing their bonding capability. Tensile stress data are measured on PDMS with various substrates and compared favorably to current methods such as oxygen plasma and UV/ozone. Sum frequency generation (SFG) has been used to probe the presence of amine and aldehyde groups on the surface after CVD polymerization and their conversion during bonding. In addition to bonding, unreacted functional groups present on the luminal surface of microfluidic channels provide free chemical groups for further surface modification. Fluorescently labeled molecules including rhodamine-conjugated streptavidin and atto-655 NHS ester were used to verify the presence of active functional groups on the luminal surfaces after bonding. ? 2008 American Chemical Society. |
URI: | https://scholars.lib.ntu.edu.tw/handle/123456789/409879 | ISSN: | 00032700 | DOI: | 10.1021/ac800341m |
顯示於: | 化學工程學系 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。