https://scholars.lib.ntu.edu.tw/handle/123456789/410505
標題: | The effect of curvature of a spacer-filled channel on fluid flow in spiral-wound membrane modules | 作者: | Li Y.-L. Tung K.-L. |
關鍵字: | CFD;Curvature;Curved channel;Spacer;Spiral-wound membrane module | 公開日期: | 2008 | 卷: | 319 | 期: | 1-2 | 起(迄)頁: | 286-297 | 來源出版物: | Journal of Membrane Science | 摘要: | Fluid flow through a spiral-wound membrane module was investigated using a computational fluid dynamic (CFD) technique. The flow phenomenon through spacer-filled channels depends on geometries: characteristic angle, mesh size, voidage and filament diameter. However, little emphasis has been placed on studying this property and its effect on the performance of the membrane module. This study focused on the influence of the curvature of spacer-filled channels on the pressure drop and shear-stress distributions in spiral-wound membrane modules. Numerical results show that there are inherent changes in the hydrodynamic behavior of the spacer-filled channel due to curvature variations. The increase in curvature of the spacer-filled channel results in an increase in the difference in shear stress between the inner and outer walls. Intuitively conjecture from the simulated numerical results, the imbalance of shear stress between the inner and outer walls may result in an unequal deposition of colloidal material between these two regions and could shorten the service time of the membrane. Microscopic understanding derived from the CFD analysis could improve the construction of a better spacer and module design, which could optimize the filament arrangement and the membrane module performance. ? 2008 Elsevier B.V. All rights reserved. |
URI: | https://scholars.lib.ntu.edu.tw/handle/123456789/410505 | ISSN: | 03767388 | DOI: | 10.1016/j.memsci.2008.03.069 |
顯示於: | 化學工程學系 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。