https://scholars.lib.ntu.edu.tw/handle/123456789/425960
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Huang Y.-F. | en_US |
dc.contributor.author | Chiueh P.-T. | en_US |
dc.contributor.author | Kuan W.-H. | en_US |
dc.contributor.author | SHANG-LIEN LO | en_US |
dc.creator | PEI-TE CHIUEH;Lo S.-L.;Kuan W.-H.;Chiueh P.-T.;Huang Y.-F. | - |
dc.date.accessioned | 2019-10-04T03:49:57Z | - |
dc.date.available | 2019-10-04T03:49:57Z | - |
dc.date.issued | 2018 | - |
dc.identifier.issn | 18766102 | - |
dc.identifier.uri | https://www2.scopus.com/inward/record.uri?eid=2-s2.0-85058232602&doi=10.1016%2fj.egypro.2018.09.092&partnerID=40&md5=d183879dbec7ce95bd460e3908a14c6f | - |
dc.identifier.uri | https://scholars.lib.ntu.edu.tw/handle/123456789/425960 | - |
dc.description.abstract | Lignocellulosic biomass feedstocks, including rice straw, rice husk, corn stover, sugarcane bagasse, sugarcane peel, waste coffee grounds, bamboo leaves, pennisetum grass, and leucaena wood, were pyrolyzed by using microwave heating. Both maximum temperature and heating rate of microwave pyrolysis of lignocellulosic biomass increased with increasing microwave power level. The minimum required microwave power level could be approximately 60 W. Solid, liquid, and gas yields of microwave pyrolysis at 500 W were in the ranges of 16-22, 40-48, and 30-40 wt%, respectively. The gaseous products were primarily composed of H 2 , CH 4 , CO, and CO 2 , whose concentration were in the ranges of 18-25, 6-8, 51-59, and 10-14 vol%, respectively. The concentration of light hydrocarbons was only 3-5 vol%. Besides, microwave pyrolysis should be more energy-saving than conventional pyrolysis because of higher devolatilization and lower reaction temperature required. Copyright © 2018 Elsevier Ltd. All rights reserved. | - |
dc.publisher | Elsevier Ltd | - |
dc.relation.ispartof | Energy Procedia | - |
dc.subject.classification | [SDGs]SDG7 | - |
dc.subject.other | Carbon capture; Energy conservation; Microwave generation; Microwave heating; Pyrolysis; Concentration of light; Heating performance; Lignocellulosic biomass; Lower reaction temperature; Maximum temperature; Microwave power levels; Microwave pyrolysis; Product distributions; Biomass | - |
dc.title | Product distribution and heating performance of lignocellulosic biomass pyrolysis using microwave heating | en_US |
dc.type | conference paper | en |
dc.identifier.doi | 10.1016/j.egypro.2018.09.092 | - |
dc.identifier.scopus | 2-s2.0-85058232602 | - |
dc.relation.pages | 910-915 | - |
dc.relation.journalvolume | 152 | - |
item.openairetype | conference paper | - |
item.cerifentitytype | Publications | - |
item.fulltext | no fulltext | - |
item.grantfulltext | none | - |
item.openairecristype | http://purl.org/coar/resource_type/c_5794 | - |
crisitem.author.dept | Environmental Engineering | - |
crisitem.author.orcid | 0000-0002-3395-4164 | - |
crisitem.author.orcid | 0000-0003-1668-6513 | - |
crisitem.author.parentorg | College of Engineering | - |
Appears in Collections: | 環境工程學研究所 |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.