https://scholars.lib.ntu.edu.tw/handle/123456789/59483
標題: | Development of a low-cost micro-CMM for 3Dmicro/nano measurements | 作者: | Fan, K.C. Fei, Y.T. Yu, X.F. Chen, Y.J. Wang, W.L. Chen, F. Liu, Y.S. |
關鍵字: | Micro-CMM;nanometre accuracy;arch bridge;co-planar stage;focusing probe | 公開日期: | 31-一月-2006 | 出版社: | 臺北市:國立臺灣大學機械工程學系 | 卷: | 17 | 期: | 2006 | 起(迄)頁: | - | 來源出版物: | Meas. Sci. Technol | 摘要: | A high-precision and low-cost micro-CMM (coordinate measuring machine) is under development. The expected measuring range is 25 × 25 × 10 mm3 and the resolution is 1 nm. In order to enhance the structural accuracy, some new ideas are integrated into the design, such as the arch-shape bridge for better stiffness and thermal accuracy, and the co-planar stage for less Abbe error. The linear diffraction grating interferometer and subdivision technique is proposed for position sensing to nanometre resolution. The focusing probe on the laser interferometer feedback spindle is structured in the Z-axis to guarantee the nanometre stability. In this report, the detailed design principles of the developed micro-CMM are described. The performance evaluation of each module of the prototype micro-CMM is presented. The positioning resolution of each axis to 1 nm can be achieved by combining the coarse and fine motion control on a piezo-ceramic linear motor. The Z-axis measurement can be controlled to within 15 nm repeatability. Parts of the positioning repeatability of the co-planar stage have been achieved to 30 nm. Some problems due to current techniques will be addressed. |
URI: | http://ntur.lib.ntu.edu.tw//handle/246246/20060927121004242979 | 其他識別: | 20060927121004242979 |
顯示於: | 機械工程學系 |
檔案 | 描述 | 大小 | 格式 | |
---|---|---|---|---|
a low cost micro cmm.pdf | 1.9 MB | Adobe PDF | 檢視/開啟 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。